Tender For Remodeling/ Renovation Of Reception Area At Shakti Sadan Head Office Building Dtl
Tender Value
62.91 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
16 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remodeling/ Renovation Of Reception Area At Shakti Sadan Head Office Building Dtl
BOQ
| Sl. No. | Item Description |
| 1 | Sub Head 01:- Item no. 1.1 To 1.45:- Remodeling/ Renovation of Reception Area at Shakti Sadan Head Office Building DTL (Civil Work) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red. Area of slab over 0.50 sqm |
| 5 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
| 6 | Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood |
| 7 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places |
| 8 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately).12mm thick commercial ply conforming to IS : 1328 BWR type |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 11 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 12 | Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match themarble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. |
| 13 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 14 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIScertification marks) |
| 15 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 16 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 19 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 20 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & locksystem with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings,runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 21 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 22 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 23 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm |
| 24 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 25 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer in-charge. |
| 26 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittingsshall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 28 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 29 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. |
| 30 | Stone (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Granite of any colour and shade 18 mm thick as per direction of Engineer in charge |
| 31 | Recovery of aluminium scrarp as per direction of engineer in charge |
| 32 | Item rate for P&F of signageboard stainless steel 304 grade,18 gauge thickness, dulywriting of letter as per size andfont complete. All lead, liftingat any height ,loadingunloading ,all taxes ,charges allL&M ,T&P as a complete job.Nothing extra will be paidwhatsoever the case may be Unit=Sq.Inch |
| 33 | Providing and fixing manually operated zebra blind with two independent layers of fabric (called outer and inner layer) with opening and closing chain mechanism, Outside mount (Arc fit), bottom rail of of aluminum extruded rail powder coated in desired shade complete in all respect. This item includes all work including supply, transporation, installation with L brackets, design and colour all complete as per direction of Engineer in charge. |
| 34 | Supplying and fixing bed side table i/c loading & unloading etc. complete as per direction of Engineer-in-charge. |
| 35 | Supplying and fixing revolving hydraulic counter chair i/c loading & unloading etc. complete as per direction of Engineer-in-charge. |
| 36 | Supplying and fixing Artificial grass Wall panels i/c loading & unloading etc. complete as par direction of Engineer in Charge |
| 37 | Supply & installation of glass panel partition wall having 12 mm thick clear toughened glass held together with 304 Grade Stainless steel fittings. The Glass panel assembly shall be connected to Slab/beams/floors by means of 304 Grade stainless steel brackets & Anchor bolts, non staining weather sealants of approved make, all complete to perform as per specification, drawings and layout as directed by Engineer in Charge. The joints between glass panels and gaps at the perimeter of the assembly to be filled with non staining weather sealant. The rate shall include all material, labour, T&P, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, glass etc. all complete as per direction of Engineer in charge. |
| 38 | Supply & installation of glass panel partition wall having 12 mm thick clear toughened glass with required frosted film held together with 304 Grade Stainless steel fittings. The Glass panel assembly shall be connected to Slab/beams/floors by means of 304 Grade stainless steel brackets & Anchor bolts, non staining weather sealants of approved make, all complete to perform as per specification, drawings and layout as directed by Engineer in Charge. The joints between glass panels and gaps at the perimeter of the assembly to be filled with non staining weather sealant. The rate shall include all material, labour, T&P, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, glass etc. all complete as per direction of Engineer in charge. |
| 39 | Supplying and installation of 12 mm thick toughened glass door shutters (double door) of approx size 2000 X 2150 mm, including all necessary Stainless Steel Fittings including 02 nos. hydraulic floor springs of reputed make such as ozone, hardwyn or equivalent, 2 no. H Type Stainless steel door handles of minimum 450 mm size, locking arrangement and other type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge |
| 40 | Making arrangement of making a reception desk of approximate size 8 X 4 foot and approximately 02 feet deep made up of wooden ply/ board/ HDHMR(High Density High moisture Resistant)/ MDF board of minimum 18 mm thickness along with required wooden frame finished from all sides with laminated sheet of min 01 mm thickness of required design, texture and pattern as per direction of Engineer in charge. This item includes all material, labour, transportation, all T&P's required to make the desk as per required design comprising of inbuilt storage, drawers, channels, hinges, mouldings, beadings, table top, screws, Stainless Steel handles, necessary holes for wirings, etc. required for successful completion of work as per direction of Engineer in charge. |
| 41 | Making arrangement of 3D acrylic LED board of approximate size 6 foot X 10 inch with required 3D glowing Letters with design, colour and pattern as per direction of Engineer in charge. |
| 42 | Providing & Fixing decorative scratch resistant acrylic laminates of approved brand and manufacture having minimum 1.5mm thickness of required design, pattern and texture as per direction of Engineer in charge. This item includes cost of material (inclusive of sheets and adhesive for pasting), transportation, loading/ unloading and labour for fixing the sheet/laminates on available surface, making arrangement for temporary taping for keeping the sheet in place, all T&P's as required to complete the job as per requirement and direction of Engineer in charge. |
| 43 | Providing & Fixing WPC (Wood-Plastic Composite) Louvers panelling/ wall cladding of approved brand and manufacture having minimum 14 mm thickness of required design, pattern and texture as per direction of Engineer in charge. This item includes cost of material (inclusive of louvers and adhesive for pasting), transportation, loading/ unloading and labour for fixing the louvers on available surface, all T&P's as required to complete the job as per requirement and direction of Engineer in charge. |
| 44 | Supplying and placing in position designer FRP (Fibre Reinforced Plastic) planters of size 14-18\\" by placing in position, all complete as per direction of Engineer in charge |
| 45 | Supplying and placing at site ornamental trees of height 05 - 08 feet along with required earthern pot, good earth and manure as per direction of Engineer in Charge |
| 46 | Supplying and placing 3 Seater sofa with fabric/ latherite cover of reputed make such as Godrej, Geeken or equivalent with width between 1800 to 2100 mm and depth between 600 to 700 mm i/c transportation, loading & unloading etc. complete as per direction of Engineer-in-charge. |
| 47 | Sub Head 02:- Item no. 2.1 To 2.26:- Remodeling/ Renovation of Reception Area at Shakti Sadan Head Office Building DTL (Electrical Work) |
| 48 | Providing & fixing/installation of Chandelier, Ceiling mounted, bunch of Glass case & suitable LED bulbs, holder & compleate with all fitting & accessuaries etc. - 15 feet apprx.- Long Hanging chain/pipe/rod & bunch of LED bulb/light, required wire & cables etc.- Latest & stylish Chandeliers are decorative light , latest designed to illuminate and enhance the aesthetics, ensuring energy efficiency Make- Barovier & Toso, and Saint Louis & equilvelent- As per sample/images. |
| 49 | Supply installation testing & Commissioning (SITC) of Smart LED TV- 65 Inch with latest design & smart fetures Compleate with fitting, heavy statnd & accessuaries etc. Resolution - Ultra HD (4K) (3840 x 2160) , High Ram & storage capacity, minimum 2 speakers with high power output. AI-powered 4K Processor, Enhanced Brightness and Contrast, OLED display Picture Quality,Real Depth Enhancer, PANTONE Validated Colours, Free Channel Access with powerful brightness, real depth enhancement, and refined HDR-like quality, every scene feels astonishingly real. Intelligent sound technologies, including Dolby Atmos Audio, and adaptive voice clarity, Seamlessly integrated smart features, , energy-efficient design. Make- LG, Sony, Samsung. As per sample/images. |
| 50 | Supply Installation Testing & Commissioning (SITC) of 1.5 Ton Split Type Wall mounted, Air Conditioner- Cooling Only, Latest design Including Inverter technology, Energy Efficient Rating BEE- 5 star, eco-friendly refrigerant, Copper coil, copper condenser, PCB warranty 5 years & compressor warranty 10 years, including compleate installion of indoor and outdoor unit with required, 4X 4 Sq.mm control cable, angle stand, copper pipe, dreain pipe , Colour- Brown, Gray etc. as required - . Make- O- General, Mistubishi, Hitachi, Voltas, Toshiba. |
| 51 | Supply Installation Testing & Commissioning (SITC) of Wall Mounted Fan 16 Inch, (400MM) compleate with all fitting & accessuaries latest design & colour- Brown, Gray- as required . Make- Cromption, Havells, Philips, Panasoniic. |
| 52 | Supply & fixing of fall ceiling high beem & focus, round concelled LED light- 20 watt - with all accessuaries & fitting etc. Colour light - Warm/White/Natural Cool etc. - Make- Cromption, Havells, Philips, Panasoniic. As per sample/Image. |
| 53 | Supply & fixing of profile/strips LED light- Compleate with alumunium/plastic channel etc., with adopter all required accessuaries & fitting, wires, cables etc.- Colour light - Warm/White/Natural Cool etc. - Make- Cromption, Havells, Philips, Panasoniic or eqivalent . As per sample/Image. |
| 54 | Supply and Fixing Boundary wall LED Light with 20 W bulb with compleate fitting, Holder, heavy matallic/ plastic body, supporting pipe, nut bolt, pipe etc. Colour light - Warm/White/Natural Cool etc. - Make- Cromption, Havells, Philips, Panasoniic or eqivalent . As per sample/Image. |
| 55 | Supply & fixing of wall mounted , horizential bar LED light- 20 watt - Elegent look, with all required accessuaries & fitting, etc. Make- Cromption, Havells, Philips, Panasoniic or eqivalent . As per sample/Image. |
| 56 | Supply & fixing of Ceiling Hanging , LED light- 20 watt - compleate with Glass case,Holder, LED bulb, latest design, metallic body with all required accessuaries & fitting, etc. Make- Cromption, Havells, Philips, Panasoniic or eqivalent . As per sample/Image. |
| 57 | Supply and Fixing of small round LED Focus Light- 8 watt with all required accessuaries & fitting, etc. Make- Cromption, Havells, Philips, Panasoniic or eqivalent . As per sample/Image. |
| 58 | Supply and Fixing of LED Spot focus Light- 18 watt, LED bulb, latest design, Elegent look, metallic body with all required accessuaries & fitting, etc. Make- Cromption, Havells, Philips, Panasoniic or eqivalent . As per sample/Image. |
| 59 | Supply and Fixing LED Flood Light 200 W with compleate fitting, heavy case/body etc. IP- 65, latest design, Elegent look, metallic body with all required accessuaries & fitting, etc. Make- Cromption, Havells, Philips, Panasoniic |
| 60 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 61 | Supply & fixing of following sizes of PVC conduit along with accessories in surface /recessed including cutting the wall & making good the same in case of recessed conduit as required. 25 mm dia. |
| 62 | Supplying and drawing following sizes of FR PVC insulated Copper Conductor, Single Core Cable in the Existing Surface / recessed Steel / PVC Conduit As Required.3 x 2.5sqmm |
| 63 | Supplying and drawing following sizes of FR PVC insulated Copper Conductor, Single Core Cable in the Existing Surface / recessed Steel / PVC Conduit As Required.3 x 4.0 sqmm |
| 64 | Supplying and fix wiring circuit submain in the Existing Surface / recessed Steel / PVC Conduit As Required.2X16 +1 x 6.0sqmm |
| 65 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 66 | Supply and fixing of 5 Amp. To 32 Amp. Rating 240 volt \\"B\\" series MCB suitable for inductive load of (Single pole and neutral ) in the existing MCB-DB complete with connections, testing and commissioning etc. as required. |
| 67 | Supplying and fixing following rating, 63 Amp double pole, 240 V,MCB in the existing MCB DB complete with connections, testing and commissioninq etc. as required. |
| 68 | Supplying and fixing DP sheet steel enclosure on surface/ recessalong with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 69 | Supplying and fixing 8 Way , MCB distribution board, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator), 8 Way- Distribution board |
| 70 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. |
| 71 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 72 | Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 73 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required (Jointing shall be done by overlapping and with 2 sets of G.I. nut, bolt & spring washer spaced at 50 mm) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender