Tender For Construction Of Reinforced Cement Concrete G+1 Office For Deputy Director & Addo Office Including Onestaff Quarter & Shed For Machineries At Ghungoor, Silchar Under Sopd-2025-26
Tender Value
1.28 Crore
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
2.56 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Reinforced Cement Concrete G+1 Office For Deputy Director & Addo Office Including Onestaff Quarter & Shed For Machineries At Ghungoor, Silchar Under Sopd-2025-26
BOQ
| Sl. No. | Item Description |
| 1 | 2.8.1. Earth work and exacavation by mechanical means(Hydraulic excavatiopn)/ manual means in foundation trenched or drains (not exceeding 1:5min width or 10sqm of plan), including dressing of slides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil |
| 2 | 2.34.1. Supplying chemical emulsion in sealed containers including deleviry as specified 1 Chloropyriphos/Lindane emulsifialbe concentrare of 20% |
| 3 | 2.35.1.1 Diluting and injecting chemical emulsion for Post-CONSTRUCTIONAL anti- termite(excluding the cost of chemical emulsion)2.35.1 Along external wall where the apron is not provided using chemical emulsion @7.5 litres/ sqm of the vertical surface of the substucture to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/lindane E.C.20% with 1% concentration metre |
| 4 | 2.35.2.1. Along the external wall below concrete or masonary apron using chemical emulsion @2.25litres per linear metre |
| 5 | 11.2 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks |
| 6 | 5.22.1 Steel reinforcementfor R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth |
| 7 | 5.9. Centering and shuttering including strutting, propping etc. and removal of form for. |
| 8 | 5.9.1. Foundations, footings |
| 9 | 5.9.5. Lintels, beams, plinth |
| 10 | 5.9.6. Column, pillars etc |
| 11 | 5.9.7. Stairs |
| 12 | 5.9.19. Weather shade, Chajjahs, corbets etc. including |
| 13 | 5.9.21. Lintels, beams, plinth beams,girders, bressumers |
| 14 | 5.9.3. Suspended floors, roofs, landings, balconies and access platform |
| 15 | 5.33. Providing and laying in position ready mixed or site batched design mixcement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland/Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recomm-ended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. |
| 16 | 5.33.1. All works upto plinth level M 25 grade |
| 17 | 5.33.2. All works above plinth level upto floor V level 5.33.2.1 Concrete of M25 grade |
| 18 | 6.16. Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth in: 6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 19 | 2.27. Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 20 | 4.11. Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1cement:2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20mm nominal size derived from natural sources). |
| 21 | 6.12. Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : 6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand |
| 22 | 10.16.1. Steel work in built up tubular (round, squareor rectangular hollow tube etc.) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 23 | 13.2. 15 mm cement plaster on the rough side of single or half brick wall of Mix: 13.2.1 1:4 (1 cement: 4 fine sand) |
| 24 | 11.3. Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate |
| 25 | 11.41.2. Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm |
| 26 | 8.31. Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadecomplete. |
| 27 | 12.1.3. Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steelprimer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 28 | 10.14.1. Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle thresholdof mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 29 | 9.5.1.2. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of requiredsize with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:-Butt hinges and necessary screws shall be paid separately) Kiln seasoned and chemically treated hollock wood. 35mm thick. |
| 30 | 21.1.2. Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wher-ever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) :Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 31 | 3.21.3.2. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neo -prene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 32 | 9.48. Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel windows by welding kg |
| 33 | 13.80. Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 34 | 13.82. Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats. |
| 35 | 13.50.1 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 36 | 13.50.3. With ready mixed redoxide zinc chromate primer |
| 37 | 13.48.3. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 38 | 21.16.1.Providing and fixing aluminium round shape handle of outer dia 100mm with ss screws etc. complete as per direction of Engineer-in-Charge. |
| 39 | 12.31.1. Providing 10 mm thick plaster of Paris(gypsum anhydrous) ceilingup to a height of 5 m above floor level over first class kail wood strips 25x6 mm with 10mm gap in between and reinforced withrabbit wire mesh fixed to wooden frame (frame work to be paid separately):12.31.1 Flat surfaces |
| 40 | Executive/Chairman table Model MAESTRO MAIN DESK+ERU+JOINING TABLE+ MOBILE PEDESTAL+BACK UNIT(Specification as per Annexure C - C2.) |
| 41 | Executive revolving high back chair hydraulic pushback type with best quality soft P.U.handle seat & back with heavy duty P.U. foam covered with best quality cloth comfort & stlyish. |
| 42 | Godrej Table.Model 2ARC (Specification as per Annexure B - B2.) |
| 43 | Revolving Mid back chair hydraulic pushback type with best quality soft P.U.handle seat & back with heavy duty P.U. foam covered with best quality cloth comfort & stlyish. |
| 44 | Four shelves steel Almirah with five compartments with three way inside locking system having rigid unpickble six liver lock with stainless steel key. Enamel spray painted and anti rust treated nicely finished made of 0.8mm CR sheet. Size –(1980x915x480)mm. |
| 45 | Steel tubular cushioned chair made of 25mm heavy MS pipe frame seat and back made of high density foam of block board with 1st class leatherite cloth with wooden arm rest |
| 46 | Add preparation of site |
| 47 | Add for internal electrification(9% of civil works) |
| 48 | Add. For Sanitary work including all fittings (9%) |
| 49 | For Motor Pumpset including Energisation 0.5% of civil works |
| 50 | For Fire Fighting ( For only Fire extinguisher) (L/S) |
| 51 | 4.1.3.Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level- |
| 52 | 6.1.1. Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in |
| 53 | 6.3.1.Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS 2222 in superstructiure above plinth level up to 1st floor levelin cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 54 | 11.1.2. Brick on edge flooring with bricks of class designation 7.5 on bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks |
| 55 | 5.9.20. Centering and shuttering including strutting, propping etc. and removal of form for |
| 56 | 5.22A. Steel reinforcement for R.C.C/. Work including straightening, cutting, bending, placingin popsition and binding all complete up to plinth level. |
| 57 | 5.2. Reinforced cement concrete in walls(any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinth upto floor five level excluding the ost of centering, shuttering , finishing and reinforcement |
| 58 | 13.5. 15mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with afloating coat of neat cement on the rough side of single or half brick wall |
| 59 | 11.6. Cement plaster skirting up to 30cm hright, with cement mortar 1:3 ( 1 cement : 3 coarse sand), finished with a floating coat of neat cement |
| 60 | 18.9. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in -charge. |
| 61 | 17.39. Providing and fixing plain bend of required degree |
| 62 | 17.3.1. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid 10litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. |
| 63 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cisteern with fittings, standard size C.P. brass flush pipe, speaders with unions and clamps. |
| 64 | 17.5.4. Providing and fixing one piece construction white vitreous china squating plate with an intregal longitudinal flushing pipe , white PVC automatic flushing cistern, with fittings, standard size G.I./PVC flush pipe for back and front flush with standard speader pipes with fittings, G.I. clamps and C.P. brass coupling complete, including painting of fittings and cutting and make good the walls and floors etc. |
| 65 | 17.7.11.Providing and fixing wash basin with C.I. brackets, 15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 66 | 17.73.2. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour |
| 67 | 17.32.4. Providing and fixing mirror of superior glass and required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. |
| 68 | 17.35. Providing and fixing soil, waste and vent pipes |
| 69 | 17.41. Providing and fixing double equal juction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete |
| 70 | 17.43. Providing and fixing single equal juction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete |
| 71 | Providing and fixing Slotted cowel of 75mm dia |
| 72 | 19.19.1.2.Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. |
| 73 | 19.33. Construction of soak pit 1.2 x1.2x1.2 m filled with brickbats including S.W. drain pipe 100mm dia and 1.20m long complete as p[er standard design. |
| 74 | 12.4.2. Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m² |
| 75 | 2.31. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 mabove ground level and removal of rubbish up to a distance of 50 moutside the periphery of the area cleared.Junmgle clearance like cutting, felling and removing trees etc. as per directed |
| 76 | 2.1. Earth work insurface excavation not exceeding 30 cm in depth byt exceeding 1.5m in width as well as as 10sqm on plan including getting out and dipsosal of excavated earth upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. |
| 77 | 5.1.2. Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level |
| 78 | 4.10. Providing and laying damp proof course with cement concrete in prop. 1:2:4 (1 cement : 2 coarase sand(zone-II) derived from natural source: 4 graded stone agg. 12.5 mm nominal size derived from natural sources) |
| 79 | 11.13.1. 12mm thick cement plaster of mix 1:4 |
| 80 | 62 mm thick cement concrete flooring with concrete hardner topping under layer 50mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1;@ (1 cement hardener mix : 2 graded stone sgg. 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacture specification. |
| 81 | 9.145. Providing and fixing factory made PVC door frame made of PVC extruded sections of size 75mmx53mm, having wall thickness 2.0mm . Both vertical sides of the frame reinforced with PVC profile of cross section size 28mmx30mmx2mm thickness and 75mmx200mm long, including reinfircing both ends of the top frame with PVC profile------------engineer -in- charge |
| 82 | 9.146. Providing and fixing 37mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x37mm with wall thickness 2mm with inbuilt beading on one side, the style and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinfforcement of size 75mmx200mm long with----------------engineer-in-charge. |
| 83 | 9.20. Providing and fixing ISI marked flush door shutters conforming to IS 2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 84 | 21.10Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators, and partition etc. with 6mm thick clear float glass bith side, having 12mm air gap, including providing EPDM gasket, perforated aliminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specidfications, drawings and direction of Engineer-in -charge complete. |
| 85 | 12.24. Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete. |
| 86 | 10.2. Structural steel works riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 87 | 13.43. Applying one coat of water thinable cement primer of approved brand manufacture on wall surface |
| 88 | 13.42.1. Distempering with 1st quality acrylic distemper ( ready mixed) having VOC content less than 50gms/liter, of approved manufacture, of required shade and colour complete, as per manufacture's specification |
| 89 | 13.61.1. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 90 | 24.11. Providing bird proof hexagonal galvd. Wire netting at ceiling level of Assam type building including fitting and fixing with first class local wood frame of oiling of timber works |
| 91 | Add. For internal electrical works |
| 92 | Add. For water supply arrangement (PCVC water tank, Hand pump etc.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender