Tender For Renovation / Augmentation Of Various Tubewells In Ac-08 Mundka.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Aug 2026
3 days left
EMD
13100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation / Augmentation Of Various Tubewells In Ac-08 Mundka.
BOQ
| Sl. No. | Item Description |
| 1 | The submersible pump set taken out from the bore due to the defective G.I. pipe and dismantling the defective electrical items from the LT panel board. At Tikri 24 no t/w, tikri 25 no t/w and chandan vihar veer bazar t/w |
| 2 | Supply of Hut Type Feeder Piller Automatic LT Panel board having suitable space for electric energy meter for 415 Volts , 3 phase , 50 Hz , 4 wire system for operation of up to15 HP submersible set, made out of not less than 2mm thick CRCA for load bearing members, and 1.6 mm for doors of panel, totally enclosed , dust and vermin proof , floor mounted type .The panel size 760mmX1360X300mm and having 1) 63 Amp 4 pole MCB 10 KA breaking capacity -1 no. (2) digital volt meter(0-400) - 1 no. (3) digital Ammeter (0-50A) - 1 no. (4) Phase sequence relay -1 No (5) Electronic timer - 1 no (6) Voltmeter Selector Switch -1 no (7) Auto Manual Selector Switch - 1 No (8) Start/Stop Push Button - 2 No (9) 32 Amp Contactor - 2 No (10) Auto/manual switch, 2-position selector-switch, Centre 'OFF' with NO+ NC Block Make:- L&T/C&S/minilac (11) Set of indicating lamps, LED-Type, operational-voltage up tp 240 V (3 No) (12) Time-Switch digital - (1 No) (13) Motor Protection Relay - 1 No (14) Aluminum Bus bar size 25 mmX6mm-1 set. (15) CT-3Nos (16) Over load Relay 14-23 Amps. 1 No (17) QT Timer -24 Hours -1 No Make of accessories:-L&T/C&S/AE/as per DJB approved |
| 3 | S/o 6 sqmm 3 Core PVC insulated flat submersible cable suitable for 1100 Volts Copper Conductor (100 Mtr Roll). Make : Havells / Gloster / DJB Approved Make |
| 4 | S/o G.I. pipe 80 mm dia size medium class with G.I. flange welded in both sides 03 mtrs long with MS strips complete with threading work on each side of pipe each flange should be 4 holes and cut for cables make :- Jindal/Tata / or any other make approved by DJB |
| 5 | S/o G.I. tail piece 80 mm dia size medium class 1.5 mtr long complete with one end threaded and one end welded with flange make Make :- Jindal/Tata or any other make DJB approved |
| 6 | S/o MS clamp 80 mm dia 600 mm long and 12 mm thick holding the pipe the complete with nut bolt and washer |
| 7 | S/o rubber insertion 75 % Neoprene (1.5 mm to 25 mm) jointing sheet conforming IS 638/79 with ISI mark 1.5 mm thick Make:- Jyoti or any other make approved by DJB |
| 8 | S/o required off size threaded nut bolts of good quality |
| 9 | Supply of MS bore cover 8 mm thick suitable for 200 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 80 mm dia hole in the center |
| 10 | Installation of E & M equipments lowering pump set in the bore and accessories executing minor civil work making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles testing and commissioning of all E&M equipments at no load and full load conditions as per standard and full satisfaction of Engineer –in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender