Tender For Wellness Centre Cum Adventure Sports Centre And Hostel At Nadaun In District Hamirpur (Hp) (Sh:- Civil, Ws & Si, Ei, Fire Fighting, Fire Alarm System And Surveillance System Etc.)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Sep 2026
28 days left
EMD
1.20 Crore
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Wellness Centre Cum Adventure Sports Centre And Hostel At Nadaun In District Hamirpur (Hp) (Sh:- Civil, Ws & Si, Ei, Fire Fighting, Fire Alarm System And Surveillance System Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) , as directed including all lead & lift and as per direction of Engineer in charge. |
| 2 | Construction of Embankment with Material Obtained from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 including all lead & lift and as per direction of Engineer in charge. |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan including dressing of sides and ramming of bottoms excavated soil and disposal of surplus excavated soil as directed including all lead & lift and as per direction of Engineer in charge. |
| 4 | Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water including all lead & lift and as per direction of Engineer in charge. |
| 5 | Preparation of beds for hedging and shrubbery by excavating cu.m 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water,filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed complete including all lead & lift and as per direction of Engineer in charge. . |
| 6 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, Holes 60 cm dia, and 60 cm deep including all lead & lift and as per direction of Engineer in charge. |
| 7 | Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia. and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming,including all lead & lift and as per direction of Engineer in charge. |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering,including all lead and lift as per direction Engineer Incharge |
| 9 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. including all lead & lift and as per direction of Engineer in charge. |
| 10 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing including all lead & lift and as per direction of Engineer in charge. |
| 11 | Stone soling of approved qualitty hand packed under floors including carriage iof materail in all leads and lifts as per the direction of Engineer-in- Charge. |
| 12 | Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. including all lead & lift and as per direction of Engineer in charge. |
| 13 | Surface dressing in all kind of soils , for the ground including removing vegetation and in-equalities upto all heights and disposal of rubbish materails upto dumping site of HPPWD/MC as approved by Engineer-in- Charge. |
| 14 | Supplying and stacking of good earth at site including royality and carraige of earth up to all leads and lifts complete including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 15 | Clearing jungle including uprooting of rank vegetation,grass, brush wood, trees and saplings of up to all girth measured at a height of 1 m above ground level and removal of rubbish with in all leads and lifts as per the direction of Engineer-in- Charge. |
| 16 | Treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Including all lead , Lift & Carriage as per Direction engineer in charge . |
| 17 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation with in all leads and lifts as per the direction of Engineer-in- Charge. |
| 18 | Fine dressing the ground Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 19 | Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge Including all lead , Lift & Carriage as per Direction of Engineer in charge. |
| 20 | Mixing earth and sludge or manure in the required proportion specified or directedIncluding all lead , Lift & Carriage as per Direction engineer in charge. |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 22 | Providing and laying cement concrete mechanically mixed 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) curing complete excluding cost of form work in foundation and plinth including carriage of material upto all leads and lifts and as per direction of Engineer Incharge. |
| 23 | Providing and laying, mechanically mixed and vibrated cement concrete 1:5:10 (one cement:Five sand Ten graded crushed stone aggregate 40 mm nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. |
| 24 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1cementm:2 course sand : 4 graded stone aggregate 12.5 mm nominal size ) Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 25 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 26 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 27 | Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work in Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 28 | Foundation ,footing basis of columns etc. and mass concrete . |
| 29 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 30 | Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all as per direction of the Engineer-in Charge including s carriage of material with in all leads ,lifts in all floor levels and other incidentals |
| 31 | Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels not exceeding 1 mtr in depth in all heights from floor as per direction of the Engineer-in Charge including carriage of material with in all leads ,lifts in all floor levels and other incidentals. |
| 32 | Columns, pillars ,posts and struts square, rectangular or polygonal in plan as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals |
| 33 | Stair case with sloping or stepped soffits excluding landing as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals |
| 34 | Form work in edges of slab and breaks in floor and walls under 20cm wide as per direction Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 35 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof : Suspended floors, roofs, landing, beams and balconies Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 36 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .Thermo-Mechanically Treated bars of grade Fe-500D or more.(TATA/Sail/Jindal Make or equivalent ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer in charge. |
| 37 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer-incharge. Foundation & Plinth |
| 38 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor V level Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 39 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 40 | Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 41 | Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall, retaining wall with 110 mm dia PVC pipe of Supreme/Finolex/Vectus extending through the full with of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 42 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Foundation and Plinth in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 43 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 44 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth/ above plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 45 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry Including all lead , Lift & Carriage as per direction engineer in charge.. |
| 46 | Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 47 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)Including all lead , Lift & Carriage as per direction engineer in charge. |
| 48 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction Including all lead , Lift & Carriage as per direction engineer in charge. |
| 49 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Granite of any colour and shade area of slab above 0.50Sqm) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 50 | Providing edge moulding to 18 mm thick marble / granaite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc Including all lead , Lift & Carriage as per direction engineer in charge. |
| 51 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 52 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 1 2 mm (average) thick cement mortar 1 :3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in Charge. 1 8 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. Including all lead , Lift & Carriage as per direction engineer in charge. |
| 53 | Ashlar Stone work for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 1 2 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1 :2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : Including all lead , Lift & Carriage as per direction engineer in charge. |
| 54 | Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood Including all lead , Lift & Carriage as per direction engineer in charge. |
| 55 | Providing and fixing 2nd class teak wood plain lining tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface 12 mm thick Including all lead , Lift & Carriage as per direction engineer in charge. |
| 56 | Providing & fixing GRC unistone tile cladding of size as per architecturl drawings in all colours and shades as approved by Engineer-in- charge over 12 mm thick bed of cement mortor 1:3(one cement:three course sand)and jointed with grey cement slurry @3.30kg /sqm complete in all respect Including all lead , Lift & Carriage as per direction engineer in charge. |
| 57 | Providing & fixing Manglore tile cladding of size as per architecturl drawings in all colours and shades as approved by Engineer-in- charge over 12 mm thick bed of cement mortor 1:3(one cement:three course sand)and jointed with grey cement slurry @3.30kg /sqm complete in all respect Including all lead , Lift & Carriage as per direction engineer in charge. |
| 58 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to sq.m IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Including all lead , Lift & Carriage as per Direction engineer in charge |
| 59 | Providing and fixing ceramic Anti skid wall tiles (300X300mm) conforming to sq.m IS : 15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 60 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc.Including all lead , Lift & Carriage as per direction engineer in charge. |
| 61 | Providing teak wood work in frames of door , windiows, clerestrory windows and other frame wrought frames and fixed in poition with hold fasts lugs or with dash fasteners of required dia & length Including all lead , Lift & Carriage as per direction engineer in charge. |
| 62 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Including all lead , Lift & Carriage as per direction engineer in charge. |
| 63 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters Including all lead , Lift & Carriage as per direction engineer in charge. |
| 64 | Extra for cutting rebate in flush door shutters Including all lead , Lift & Carriage as per direction engineer in charge. |
| 65 | Providing and fixing wooden moulded beading 50x20 mm to doorand window frames with iron screws, plugs and primingcoat on unexposed surface etc. complete Including all lead , Lift & Carriage as per direction engineer in charge. |
| 66 | Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including topcover of 6 mm coir veneer board, nickle plated M.S. Pipe20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40 mm x 40 mm on both inner side of pelmet andrawl plugs 75 mm long etc all complete.Including all lead , Lift & Carriage as per direction engineer in charge. |
| 67 | Extra for using veneered particle board with decorative veneering on both sides conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm Including all lead , Lift & Carriage as per direction engineer in charge. |
| 68 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steelprimer all complete Fixed to steel windows by welding Including all lead , Lift & Carriage as per direction engineer in charge. |
| 69 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides Including all lead , Lift & Carriage as per Direction engineer in charge |
| 70 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etc. complete: Same as above but 100x75x4 mm (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 71 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etc. complete:75x63x4 mm (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 72 | Providing and fixing bright finished SS tower bolts (barrel type) with screws complete Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 73 | 250x10mm (Two hundred Fifty X Ten mili metres) |
| 74 | 200x10mm (two hundred X Ten mili metres) |
| 75 | 150x10mm (one hundred fiftyX Ten mili metres) |
| 76 | Providing and fixing bright finished SS door latch with necessary screws etc. complete Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 77 | 300X16X5 mm |
| 78 | 250x16x5 mm |
| 79 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc Including all lead , Lift & Carriage as per direction engineer in charge. |
| 80 | Providing and fixing bright finished SS handles 150mm with screws etc.Including all lead , Lift & Carriage as per Direction engineer in charge |
| 81 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. Including all lead , Lift & Carriage as per direction engineer in charge. |
| 82 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, , with necessary accessories and screws etc Including all lead , Lift & Carriage as per direction engineer in charge. |
| 83 | Providing and fixing stainless Steel concealed Hydraulic Door Closer complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 84 | Providing and fixing bright finished brass casement stays (straight peg type) 250 mm weighing not less than 280 gms with necessary screws etcIncluding all lead , Lift & Carriage as per direction engineer in charge. |
| 85 | Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 86 | Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 87 | Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 88 | Providing and fixing factory made uPVC white colour casement/ Casement Cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge including . Single / double glass panes and silicon sealent etc. For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Including all lead , Lift & Carriage as per direction engineer in charge. |
| 89 | Casement door with 3D hinges made of (big series) frame 67x64 mm@ sash 67x110 mm both having wall thickness of 2.3 +0.20 mm and single g;lazing bead / double glazing beas of appropriate dimension ( Area of dorr upto 2.00sqm) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 90 | Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm) Including all lead , Lift & Carriage as per direction engineer in charge. |
| 91 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.(Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 92 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 93 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing framethe gap between frame and adjacent finished wall shal be lefilled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).Including all lead , Lift & Carriage as per direction engineer in charge. |
| 94 | Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 95 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 96 | Supplying and installation of Low Relief FRP 6.0 mm thick gate design as per drawings made of good quality FRP, composite, interior and model making materials etc. complete as per approved artwork, shop drawings & Visual representations duly installed at site and complete in all respect and as per direction of Engineerin-in charge including but not limited to passages for services, lights and produced as per standard best practices of moulding, casting, finishing, coloring, painting, installation and MS structure as per approved design and RCC work over it etc. Item to be inclusive of all frame works, sub construction, supporting structures required for installation of the low relief FRP.Note: Mode of measurement should be paid the flat front elevation area Including all lead , Lift & Carriage as per direction engineer in charge. |
| 97 | Supplying and fixing of Door Size 1200mm x 2400mm: Aluminium system with & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 98 | Supplying and fixing of Door Size 900mm x 2400mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 99 | Supplying and fixing of Window Size 1500mm x 1600mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 100 | Supplying and fixing of Window Size 1800mm x 1500mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 101 | Supplying and fixing of Window Size 1500mm x 1500mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 102 | Supplying and fixing of Ventilator Size 3600mm x 600mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 103 | Supplying and fixing of Door Size 1200mm x 2400mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 104 | Supplying and fixing of Window Size 900mm x 1200mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 105 | Supplying and fixing of Window Size 1500mm x 1500mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures Including all lead , Lift & Carriage as per direction engineer in charge. |
| 106 | Providing and fixing MS bridge size 7.0 m x 3.65 m x 0.76 m Arch shape all joints mitred, welded and grinded finish, with profiles of required size & steel members painted with rust proof primer and black paint. Planks 50mm thick & railing made of seasoned Deodar wood design as per drawing & Melamine polish on wooden all members including civil work etc Including all lead , Lift & Carriage as per direction engineer in charge. |
| 107 | Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 108 | Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 75mm (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 109 | Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete:(150X10mm) (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 110 | Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: (100X10mm) (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 111 | Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : . 300x16 mm (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 112 | Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete (250X16mm) (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 113 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 114 | Supplying and fixing rolling shutters of approved make, made of required size MS Laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets , side guides and arrangments for inside and out side locking with push and pull long wires springs manufactured from high tensile tell wire of adiquate strength confirming to IS : 4454-Part -1 and MS top Cover of required thickness fro rollinf shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 115 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 116 | Suppying and fixing MS Sheet including all material, labour T & P complete in all respect as per direction of engineer incharge. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 117 | Providing and fixing ball bearing for rolling shutters. (Including all Lead, Lift & Carriage as per Direction engineer in charge) |
| 118 | Extra for providing mechanical device chain and crank operation for operating rolling shutters. (Including all Lead, Lift & Carriage as per Direction engineer in charge) |
| 119 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) Hot finished welded type trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.(Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 120 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 121 | Providing and fixing bolts including nuts and washers complete (Including all lead , Lift & Carriage as per Direction engineer in charge). |
| 122 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 123 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing,staircase railing and similar works, including applyingpriming coat of approved steel primer.MS Tube (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 124 | Providing and fixing Second Class Teak Wood hand rail on MS Railing with Paint including all material, labour T & P complete in all respect as per direction of engineer incharge. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 125 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,M18 Foundation Bolts with Leveling Nut (Grade 5.5 HD) Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Threaded rod M20x3000 8.8 zinced |
| 126 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,HILTI\\" : #RE500- SD EPOXY SS \\"HILTI\\" HAS-E-R BOLTwith M18 x 125 / 50 (Min 175 mm long Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth(Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HIT-V-R__,M20X240 |
| 127 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,HILTI\\" : #RE500- SD EPOXY SS \\"HILTI\\" HAS-E-R BOLTwith M12 x 125 / 35 (Min 160 mm long Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 ,M12x160 |
| 128 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,HILTI\\" : #RE500- SD EPOXY SS \\"HILTI\\" HAS-E-R BOLTwith M16 x 130/ 45 (Min 175 mm long Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 M16x190 |
| 129 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,M32 Foundation Bolts with Leveling Nut (Grade 5.5 HD) Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required (Including all lead , Lift & Carriage as per Direction engineer in charge) Threaded rod, AM33x1000 8.8 zinced |
| 130 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,\\"HILTI\\" : #RE500- SD EPOXYSS \\"HILTI\\" HAS-E BOLT WITHM18 x 125 /38 (Min 175 mm long)/Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 ,M20x240 |
| 131 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,\\"HILTI\\" : #RE500- SD EPOXYSS \\"HILTI\\" HAS-E BOLT WITHM20 x 170 / 45 (Min 240 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 ,M20x240 |
| 132 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,\\"HILTI\\" : #RE500- SD EPOXYSS \\"HILTI\\" HAS-E BOLT WITH M18 x 125 / 34 (Min 175 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 ,M20x240 |
| 133 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,\\"HILTI\\" : #RE500- SD EPOXYSS \\"HILTI\\" HAS-E BOLT WITH M16 x 125 / 35 (Min 190 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required depth(Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 ,M16x190 |
| 134 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,\\"HILTI\\" : #RE500- SD EPOXYSS \\"HILTI\\" HAS-E BOLT WITH M16 x 125 / 40 (Min 175 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 ,M16x190 |
| 135 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,\\"HILTI\\" : #RE500- SD EPOXYSS \\"HILTI\\" HAS-E BOLT WITH M20 x 170 / 45 (Min 240 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 ,M120x240 |
| 136 | Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,\\"HILTI\\" : #RE500- SD EPOXYSS \\"HILTI\\" HAS-E BOLT WITH M16 x 125/ 45 (Min 190 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the required depth (Including all lead , Lift & Carriage as per Direction engineer in charge) Anchor rod HAS-U A4 ,M16x190 |
| 137 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 138 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 139 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 140 | Providing and laying 20-25 mm thick kota Stone slabs in flooring laid on 12 mm (average) thick cement mortar 1:4 (1 cement: 4 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 141 | Providing and laying 20 mm thick Kota stone slab slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 142 | Providing and laying 18mm thick polished granite stone slab slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 143 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with: Second class teak wood (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 144 | Providing and fixing 20-25 mm thick wooden decking made from highest quality seasoned adn treated Teak wood finished with UV Oils to ensure long lif over the Aluminium frame work on required spacing as per drawing and design approved the (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 145 | Providing and fixing Thermo pine harwood 117 mm width 12 mm thick made from highest quality seasoned adn treated Teak wood finished with UV Oils to ensure long lif over the Aluminium frame work on required spacing as per drawing and design (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 146 | Providing and laying Antiskid vitrified floor tiles in sizes 600mm x 600x10mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.(Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 147 | Providing and laying Ceramic glazed floor tiles of size 300x300 x10mm , of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 148 | Providing and laying KAJARIA Make or equivalent Double charged digital vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc(Including all lead , Lift & Carriage as per Direction engineer in charge)- Size of Tile 600mm x 600mmx10mm |
| 149 | Providing and laying KAJARIA Make or equivalent Double charged digital vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc(Including all lead , Lift & Carriage as per Direction engineer in charge)- Size of Tile 600 x 1200 x10mm |
| 150 | Providing and fixing SPC Flooring including all material, labour T & P Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 151 | Providing and fixing EPDM Flooring including all material, labour T & P Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 152 | Providing and fixing Artificial Turf Flooring including all material, labour T & P Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 153 | Providing and fixing WPC Deck Flooring including all material, labour T & P Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 154 | Providing & Fixing Carpet Flooring iIncluding all lead , Lift & Carriage as per Direction engineer in charge. |
| 155 | Providing and fixing PVC Flooring including all material, labour T & P complete Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 156 | Providing and laying Vitrified tiles in different sizes 600x600mm , 12 mm thick with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 157 | Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etcIncluding all lead , Lift & Carriage as per Direction engineer in charge ( with18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. |
| 158 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operationIncluding all lead , Lift & Carriage as per Direction engineer in charge. |
| 159 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etcIncluding all lead , Lift & Carriage as per Direction engineer in charge.(i)Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 160 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc Including all lead , Lift & Carriage as per Direction engineer in charge with Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (i) |
| 161 | Providing and fixing Granite pavers /cobbles as per drawing and design and specifications 100X 100 X 75mm Pattern 1 including carrriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 162 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete :With residual type petroleum bitumen of grade VG -10 Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 163 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar with bhusha @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cowdung) and covered with machine moulded tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat (With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation 12.5, conforming to IS 2690) Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 164 | Providing & fixing Tile brick masonry work 5 cm thick with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth Including required material, Scaffolding for all height, curing, necessary grooving, grouting /pointing with cement mortar and compound as per manifacturer's specifications, cleaning with water jet and epoxy coating complete in all respect. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 165 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 166 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc.complete (frame work to be paid seperatately).18 mm thick Cement fiber board as per IS: 14862 Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 167 | Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame In Falt Surfaces Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 168 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 169 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screwsof size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frameof perimeter channels suitably fixed, all complete as per drawings,specification and direction of the Engineer in Charge but excluding the cost of 12.5 mm thick tapered edge gypsum moisture resistant board Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 170 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia Per running Metre with prepainted limpet and rubber washers complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge (Make TATA/SAIL or equivalent.) |
| 171 | 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 172 | 15 mm cement plaster on rough side of single or half brick wall of mix 1: 5 (1 cement: 6 fine sand) Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 173 | 15 mm textured cement plaster on rough side of single or half brick wall of mix 1: 6 (1 cement: 6 fine sand) Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 174 | 15 mm cement plaster of mix : 1:6(1 cement: 6 fine sand Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 175 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement 12 mm cement plaster Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 176 | 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 177 | Finishing with Deluxe Multi surface paint system forinteriors and exteriors using Primer as permanufacturers specificationsPainting wood work with Deluxe MultiSurface Paint of required shade. Two ormore coat applied @ 0.90 ltr/10 sqm over anunder coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 178 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 179 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Including all lead , Lift & Carriage as per Direction engineer in charge.Ridges plain (500 - 600mm) |
| 180 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws Including all lead , Lift & Carriage as per Direction engineer in charge. Gutter (600 mm over all girth) |
| 181 | Supplying and fixing Roof Finished in Shingles With 5 Mm Membrane Base Of Saint-Gobain On Base Cement Board Over Ms Frame Work complete in all repsect as per engineer in charge. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 182 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 183 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Suppying and fixing HPL Sheet Exterior Cladding Panel of thickness 6mm including all material, labour T & P Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 184 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 185 | Suppying and fixing Mineral Fiber grid False Ceiling including all material, labour T & P complete in all respect as per direction of engineer incharge. Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 186 | Providing and fixing PVC Sheet on Ceiling including all material, labour T & P complete in all respect as per direction of engineer incharge. Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 187 | Suppying and fixing Metal grid False Ceiling including all material, labour T & P complete in all respect as per direction of engineer incharge. Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 188 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 189 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 190 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 191 | Finishing walls with Apex exterior grade paint of required shade New work (Two or more coats applied and including priming coat of exterior primer applied Including all lead , Lift & Carriage as per Direction engineer in charge |
| 192 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 193 | Painting with Deco paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 194 | Providing and applying primer of approved brands / Asian/ Nerolac / or equivlent over a prepared base of putty on walls to prepare the surface even and smooth Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 195 | Melamine polishing on wood work (one or more coat) Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 196 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lIncluding all lead , Lift & Carriage as per Direction engineer in charge. |
| 197 | Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mmnominal size) over 75mm bed of dry brick ballast 40mm nominal size, well rammed and consolidatedand grouted with fine sand, including finishing the top smooth etcIncluding all lead , Lift & Carriage as per Direction engineer in charge. |
| 198 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required Including all lead , Lift & Carriage as per Direction engineer in charge.(length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 199 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and Including all lead , Lift & Carriage as per Direction engineer in charge..With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 (Including all Lead, Lift & Carriage as per Direction engineer in charge) |
| 200 | Construction of granular Sub-base by providing close graded Material confirming to specifications, mixing in mechanical plant at OMC carraige of materail by Tipper to site of work, for all leads and lifts , spreading in uniform layers of specific thickness with motor grader on prepared sursface and compacting with vibratory power roller to achieve the desired density ( With materail confirming to Grade-II ( Size range 53 mm to 0.075 mm ) Having CBR Value 25 Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 201 | Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075mm) to wet Mix macadam (WMM) Specifications including premixing the materail with water at OMC in for all leads and lifts laying in uniform layers with mechanical paver finisher in sub base / base course on well prepared surface and compacting with vibratory roller of 10 tonne capacity to achive the desired density , Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 202 | Supplying and Laying at site 90 mm to 45 mm size stone aggregate For Filteratioon Tank including s\upply of all materials T & P etc.Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 203 | Supplying and stacking at site. 63 mm to 45 mm size stone aggregate WBM 2 Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 204 | Supplying and stacking at site. 53 mm to 22.4 mm size stone aggregate WBM 3 Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 205 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 206 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow studshall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973.The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 207 | Providing Retro-reflective regulatory sign board of size 900 mm dia metermade out of 2 mm thick aluminium sheet, face to be fully covered with highintensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A.The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 208 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc Including all lead , Lift & Carriage as per Direction engineer in charge.. |
| 209 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.Including all lead , Lift & Carriage as per Direction engineer in charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 210 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand Including all lead , Lift & Carriage as per Direction engineer in charge. |
| 211 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern |
| 212 | 40 mm thick C.C. paver block of M-30 grade with approved color design and pattern |
| 213 | Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinic+PVC coated, Mesh wire diameter 2.7/3.7mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing,including all lead , Lift & Carriage as per Direction engineer in charge. |
| 214 | Supplying and stacking of good earth at site including royality and carraige of earth up to all leads and lifts as per direction of Engineer - in Charge |
| 215 | Doob grass and Seed Grassing with Special Grade -1 grass including watering and maintunance of the lawn for 30 days or more till the grass form a thick lawn free from weeds and fir for movoing including supplying good earth needed including carriage of materail including all lead , Lift & Carriage as per Direction engineer in charge. |
| 216 | Providing, execution and development of vertical garden over the existing walls including fabrication and installation of aluminium/fibre frame work for fixing the planted pots as per direction at details given in the drawings complete with provision of drip irrigation system, supplying and fixing of natural air purifier ornamental plants in the suitable size plastic/fibre pots (polypropylene) potted plants, including suitable organic potting mix and other required ingredients . One year maintenance is also included in the item including all lead , Lift & Carriage as per Direction engineer in charge. |
| 217 | Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Pilkhan- Ficus infectoria |
| 218 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : including all lead , Lift & Carriage as per Direction engineer in charge. With 20x20 mm square bar |
| 219 | Supplying and fixing C.I. cover without frame for manholes : 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg including all lead , Lift & Carriage as per Direction engineer in charge. |
| 220 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 Square shape 450 mm internal dimensions including all lead , Lift & Carriage as per Direction engineer in charge. |
| 221 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design including all lead , Lift & Carriage as per Direction engineer in charge. |
| 222 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) JINDAL MAKE including all lead , Lift & Carriage as per Direction engineer in charge. |
| 223 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 224 | Providing and fixing Laminate Panel at Walls including supply all metarial T & P complete in all respect as per Site in engineer. including all lead , Lift & Carriage as per Direction engineer in charge. |
| 225 | Providing and fixing Wallpaper on wall complete in all repsect as per engineer in charge. (Including all lead , Lift & Carriage as per Direction engineer in charge) |
| 226 | Providing and fixing PVC Fluted Panel (30 X 12 mm batten) at Walls including supply all metarial T & P including all lead , Lift & Carriage as per Direction engineer in charge. |
| 227 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings including carriage of materials in all leads and lift as per direction of Engineer in Charge:-Pre-laminated particle board with decorative lamination on both sides. |
| 228 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in charge With stainless steel cover plate minimum 1.25 mm thickness including all lead , Lift & Carriage as per Direction engineer in charge. |
| 229 | Providing and fixing Stainless Steel door handle of size 1000mm long and 50 mm thick rod with SS screws etc including all lead , Lift & Carriage as per Direction engineer in charge. |
| 230 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete (only weight of grill to be measured for payment) including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 231 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, (Door handle, lock and stopper etc.to be paid separately). |
| 232 | Providing and fixing 12mm thick toughened reflective Glass of saint gobian with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings including all lead , Lift & Carriage as per Direction engineer in charge. |
| 233 | Providing and fixing 10mm thick toughened glass Railing with Stainless Steel Framing including all material, labour T & P including all lead , Lift & Carriage as per Direction engineer in charge. |
| 234 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions consisting of: Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofingcompound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheetshould be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) including all lead , Lift & Carriage as per Direction engineer in charge.. |
| 235 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry including all lead , Lift & Carriage as per Direction engineer in charge. |
| 236 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured including all lead , Lift & Carriage as per Direction engineer in charge. |
| 237 | Providing and laying integral cement based treatment for treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with :Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 including all lead , Lift & Carriage as per Direction engineer in charge. |
| 238 | Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. (i)The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured including all lead , Lift & Carriage as per Direction engineer in charge. |
| 239 | Providing and fixing PVC Coupler (90 mm dia) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 240 | Providing and fixing PVC Coupler (110 mm dia) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 241 | Providing and fixing PVC Single tee with door required degree access door 90x90x90x110mm including all lead , Lift & Carriage as per Direction engineer in charge. |
| 242 | Providing and fixing PVC Single tee with door required degree access door 110x110x100x110mm including all lead , Lift & Carriage as per Direction engineer in charge. |
| 243 | Providing and fixing on wall face unplasticised Rigid PVC pipes (90 mm dia)including all lead , Lift & Carriage as per Direction engineer in charge. |
| 244 | Providing and fixing on wall face unplasticised Rigid PVCpipes (150mm dia) For External Work including all lead , Lift & Carriage as per Direction engineer in charge. |
| 245 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm diameter including all lead , Lift & Carriage as per Direction engineer in charge. |
| 246 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter including all lead , Lift & Carriage as per Direction engineer in charge. |
| 247 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Bend 87.5° 110 mm bend including all lead , Lift & Carriage as per Direction engineer in charge. |
| 248 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all lead , Lift & Carriage as per Direction engineer in charge. |
| 249 | 110 mm bend |
| 250 | 110 mm Shoe |
| 251 | Providing and fixing PVC Shoe (Plain) (90 mm dia) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 252 | Providing and fixing PVC plain bend of required degree (90 mm dia) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 253 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 90 mm dia including all lead , Lift & Carriage as per Direction engineer in charge. |
| 254 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. for pipe 110 mm duameter including all lead , Lift & Carriage as per Direction engineer in charge. |
| 255 | Providing and fixing water closet squatting pan Viterous china orrisa type W.C. pan of 580mm Make- JAL Cat No.65510-13 / Kohler /Hindware /jaquar/Cera or Equivalent (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including all lead , Lift & Carriage as per Direction engineer in charge. |
| 256 | Providing and fixing white vitreous china water closet (European type W.C. pan) JAL make Cat No. 65225-13/ / Kohler /Hindware /jaquar/Cera or equivalent with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat, jet and lid including all lead , Lift & Carriage as per Direction engineer in charge. |
| 257 | Providing and fixing counter top Viterous china flat back wash basin 630x450 mm Make- JAL Cat No. 66110-13/Kohler /Hindware /jaquar/Cera or equivalent including all lead , Lift & Carriage as per Direction engineer in charge. |
| 258 | Providing and fixing Sensor Urinal (exposed) ‘Hebbal’ Post Flush Make- JAL Cat No.78315/ / Kohler /Hindware /jaquar/Cera or equivalant 15 mm having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specificationincluding all lead , Lift & Carriage as per Direction engineer in charge. |
| 259 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board510x1040 mm bowl depth 250 mm including all lead , Lift & Carriage as per Direction engineer in charge. |
| 260 | Providing and fixing Bottle Trap Make- JAL Cat No. 1861S03 / / Kohler /Hindware /jaquar/Cera or equivalent 32 mm size of approved quality & make and as per the direction of Engineer-in-charge. |
| 261 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. Flexible pipe 32mm dia including all lead , Lift & Carriage as per Direction engineer in charge. |
| 262 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia including all lead , Lift & Carriage as per Direction engineer in charge. |
| 263 | Providing and fixing mirror of superior glass JAL make Cat No. 46551 or equivalent of approved quality and of required shape and size : Rectangular shape 450x600 mm including all lead , Lift & Carriage as per Direction engineer in charge. |
| 264 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete |
| 265 | Providing and fixing toilet paper holder Make- JAL Cat No. 26546 or equivalent including all leads and lifts : C.P. brass including all lead , Lift & Carriage as per Direction engineer in charge. |
| 266 | Cutting chases in brick masonry walls for followingdiameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete1:3:6 ( 1 cement : 3 coarse sand :6 graded stoneaggregate 12.5 mm nominal size), including necessaryplaster and pointing in cement mortar 1:4 (1 cement : 4coarse sand) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 267 | 100mm dia |
| 268 | 75mm dia |
| 269 | Providing and fixing of Liquid Soap Dispenser With Glass Tumbler JAL make Cat No. 37547 or equivalent brand with S.S. Screw including all lead , Lift & Carriage as per Direction engineer in charge. |
| 270 | Providing and fixing JAL make Cat No. 36524 or euivalent stainless steel towel ring with concealed fittings arrangement including all lead , Lift & Carriage as per Direction engineer in charge. |
| 271 | Providing and fixing stainless steel towel rail JAL make Cat No. 36520 or equivalent 600 mm long with arrangement of approved quality including all lead , Lift & Carriage as per Direction engineer in charge. |
| 272 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mmwith 1/2\\" BSP thread and shapes, weighing not less than 60 gms. including all lead , Lift & Carriage as per Direction engineer in charge. |
| 273 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints including all lead , Lift & Carriage as per Direction engineer in charge. Concealed work, including cutting chases and making good the walls etc. : |
| 274 | 15 mm nominal outer dia Pipes |
| 275 | 20 mm nominal outer dia Pipes |
| 276 | 25 mm nominal outer dia Pipes |
| 277 | 32 mm nominal outer dia Pipes |
| 278 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplyincluding all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints including all lead , Lift & Carriage as per Direction engineer in charge. External work |
| 279 | 25 mm dia. nominal bore |
| 280 | 32 mm dia. nominal bore |
| 281 | Providing and fixing PPR Unions 20mm including all lead , Lift & Carriage as per Direction engineer in charge. |
| 282 | Providing and fixing PPR Unions 25mm including all lead , Lift & Carriage as per Direction engineer in charge. |
| 283 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc including all lead , Lift & Carriage as per Direction engineer in charge. External work |
| 284 | 40mm dia nominal bore |
| 285 | 50 mm dia nominal bore |
| 286 | 65 mm dia nominal bore |
| 287 | 80 mm dia nominal bore |
| 288 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. including all lead , Lift & Carriage as per Direction engineer in charge.25 to 40 mm nominal bore |
| 289 | Providing and fixing C.P. brass Short body bib cock JAL make Cat No. 9032 or equivalent of approved quality conforming to IS standards. - 15 mm nominal bore including all lead , Lift & Carriage as per Direction engineer in charge. |
| 290 | Providing and fixing brass stop cock of approved quality 20 mm nominal bore including all lead , Lift & Carriage as per Direction engineer in charge. |
| 291 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 292 | 25 mm nominal bore |
| 293 | 32 mm nominal bore |
| 294 | 40 mm nominal bore |
| 295 | 50 mm nominal bore |
| 296 | Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats 20 mm nominal bore including all lead , Lift & Carriage as per Direction engineer in charge. |
| 297 | Providing and fixing JAL make Cat No. 444 or equivalent uplasticised PVC connection pipe with brass unions : Providing and - 20 mm nominal bore including all lead , Lift & Carriage as per Direction engineer in charge. |
| 298 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore including all lead , Lift & Carriage as per Direction engineer in charge. |
| 299 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including all lead , Lift & Carriage as per Direction engineer in charge. |
| 300 | Providing and fixing C.P. brass long nose bib cock JAL make Cat No. 9036 or equivalent of approved quality conforming to IS standards. - 15 mm nominal bore |
| 301 | Providing and fixing C.P. brass angle stop cock JAL make Cat No. 9048 or equivalent for basin mixer and geyser points of approved quality conforming to IS:8931 including all lead , Lift & Carriage as per Direction engineer in charge- 15mm nominal bore |
| 302 | Provinding & Fixing Piller cock including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 303 | Providing and fixing grating JAL Make Cat No. 9336 or equivalent 100x100 mm nominal size including all lead , Lift & Carriage as per Direction engineer in charge. |
| 304 | Providing and fixing grating of approved quality and colour. Circular type.100 mm nominal dia including all lead , Lift & Carriage as per Direction engineer in charge. |
| 305 | 125 mm nominal dia with 25 mm waste hole including all lead , Lift & Carriage as per Direction engineer in charge. |
| 306 | Providing and fixing stainless steel soap Dish Holder JAL make Cat No. 26541 or equivalent with s.s screw including all lead , Lift & Carriage as per Direction engineer in charge. |
| 307 | Providing and fixing extension nipple for water tank pipe, fittings of approved quality and colour 20mm nominal bore. Weighing not less than 40gms. including all lead , Lift & Carriage as per Direction engineer in charge. |
| 308 | Providing and fixing 90 mm Pvc trap approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 309 | Providing and fixing 110 mm Pvc trap approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 310 | Construction of brick masonry manhole in cement mortar 1:4 ( 1 Cement : 4 Sand) with RCC Top slab with 1:1.5:3 ( 1 Cement : 1.5 coarse sand: 3 Coarse aggregate 20mm nominal size ) foundation concrete 1:4:8 ( 1 Cement : 4 Coarse Sand :8 Graded Stone aggregate 40mm nominal size ) Inside plastering 12 mmthick with cement mortar 1:3 ( 1 Cement : 3 Coarse Sand ) finished with a floating cost of neat cement and making channel in cement concrete 1:2:4 ( finished with a floating cost of neat cement and making channel in cement concrete complete as per standard design including all lead , Lift & Carriage as per Direction engineer in charge. |
| 311 | Inside diameter 80x90 cm and 60 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg) |
| 312 | Inside diameter 80x90 cm and 75 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg) |
| 313 | Inside diameter 80x90 cm and 90 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg) |
| 314 | Inside diameter 80x90 cm and 105 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg) |
| 315 | Inside diameter 80x90 cm and 120 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg) |
| 316 | Making connection For pipes 100 to 250 mm diameter to septic tank/ STPof drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc.including all lead , Lift & Carriage as per Direction engineer in charge. |
| 317 | Providing and fixing C.P. brass Wall Mixture on Upper Side, Connecting Legs & Wall Flanges approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 318 | Providing and fixing Central Hole Basin Mixture with popul waste System with 450 mm long Braided Hoses including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 319 | Providing and fixing Sinkn Mixture with including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 320 | Provinding & Fixing Anguler Cock with wall flange including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 321 | Providing and fixing white European wall hung water closet PP soft close seat cover, Hinges, Fixing Accessories and Accessories set, including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 322 | Provinding & Fixing White Vitreous China Under Counter basin with including all materials T & P etc. Complete Counter top basin including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 323 | Provinding & Fixing White Vitreous China basin with Full Padestal including all materials T & P etc. Complete Counter top basin & Padestal approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 324 | Providing and fixing C.P. brass shower rose with size 120 mm dia including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 325 | Providing and fixing C.P. brass shower Arm with size 20 mm & 450 mm long round Shape single flow with self cleaning function approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 326 | Provinding & Fixing White Vitreous China Urinal including all materials T & P etc. Complete. approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 327 | Provinding & Fixing Urinal Partition including all materials T & P etc. Complete. approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 328 | Providing and fixing 600mm long towel rail without hanger total length of 600mm, including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 329 | Providing and fixing towel ring round with Round Flangincluding all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 330 | Providing and fixing Bath Tub including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 331 | Providing and fixing Bath & Shower Mixer including all materials T & P etc. Complete approved as per E/I (Make Jaguar or equivalent) including all lead , Lift & Carriage as per Direction engineer in charge. |
| 332 | Providing and fixing pillar tap JAL make Cat No. 77222 or equivalent with having water inlet, including fixing to wall with suitable brackets all as per manufacturers specification complete including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 333 | Providing and fixing 6 Per Kilogrammef pvc Poly plast sewerage pipe 75 mm diameter of working pressure not less than 4.5 Per Kilogramme per square Per running Metre (Four point five kilogramme per square Per running Metre) including filling the joints with approved adhesive complete including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. Make Finolex or equivalent |
| 334 | Providing and fixing 6 Per Kilogrammef pvc Poly plast sewerage pipe 110 mm diameter of working pressure not less than 4.5 Per Kilogramme per square Per running Metre (Four point five kilogramme per square Per running Metre) including filling the joints with approved adhesive complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.Make Finolex or equivalent |
| 335 | Providing and fixing 6 Per Kilogrammef pvc Poly plast sewerage pipe 150mm diameter of working pressure not less than 4.5 Per Kilogramme per square Per running Metre (Four point five kilogramme per square Per running Metre) including all fittings & filling the joints with approved adhesive complete. complete including carrriage of material upto all leads and lifts and as per direction of Engineer in charge.Make Finolex or equivalent |
| 336 | Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including carrriage of material upto all leads and lifts and as per direction of Engineer in charge.Make Finolex or equivalent |
| 337 | PVC plain Bend75 mm dia. |
| 338 | PVC plain Bend110 mm dia. |
| 339 | Single equal branch of required degree with oval 75 mm dia. |
| 340 | Single equal branch of required degree with oval 110 mm dia. |
| 341 | PVC COLLAR 75 mm dia |
| 342 | PVC COLLAR 110 mm dia |
| 343 | PVC Camps75 mm dia |
| 344 | PVC Camps110 mm dia |
| 345 | PVC Cowls 75 mm dia |
| 346 | PVC Cowls 110 mm dia |
| 347 | PVC Door Bend75 mm dia. |
| 348 | PVC Door Bend110 mm dia. |
| 349 | PVC Tee75 mm dia. |
| 350 | PVC Tee110 mm dia. |
| 351 | Providing and fixing PVC floor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 352 | 110 mm Pvc floor trap |
| 353 | Providing and fixing toilet grab bars /rails for bath room 23.6 inch stainless steel flip up handicap safety grab bars for elderly seniors / disabled persons , bath tubs , showers , foldable handle grips , support for walls drop down grab bars/ hand bars on fire exits for physically disabled persons complete as per NBC Standards including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 354 | Providing and fixing stainless steel fire exit door panic bar heavy duty silver coated , brand Geze pull handle for fire doors /exit doors , door width 48 inch. including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 355 | Providing and fixing premium toilet with disable friendly fittings , Cera / Jaguar or make or equivalent complete ( Cruse Set EWC 710x370x810 mm , clour snow white Cat NO S1021113,S-trap Cat No S 1021114 ,P Trap S 1021114, Cistern Cat No S1060106 , Soft cloase seat Cover Cat No B 1520118, Twin Flush fittings B1010112, Wash basins 510x400 Cat No S 2040101 , Spatula Basin MIxers Cat No F 90030451 Wall mounted Grab Bar 600mm long Cat No B 2210106 , Wall mounted hinged rail 750x100 Cat No B 2210108 Foldable Shower Chair Cat No B 2210109,Rain Shower Cat NoF 701010955 complete with all necessary fitting and fixtures including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 356 | Providing ,installation , testing and commissioning of Waves sewage treatment plant oF 5 KLD capacity having the components of the scheme :- Screen chamber ,Equalization Tank , Tube settler tank , pressure sand filter , Activated carbon filter and treated water tank including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. .( Note :- Screen Chamber , Equalization Tank and treated water tank shall be paid in the items of RCC .) |
| 357 | Providing & fixing in Toilets of main entry gate make of Galaxy Cubicle nylon-11 single colour (Boilo Board 21 years Waranty) 13 No of size 1500mm x 900mm x 1995 mm and (13 Nos) of size 1200mm x 1200mm x 2400mm or as per drawing with All Accessories SS grade 304/316 & aluminium Grade 6063 T6 Alloy.Nylon set box, U Channel, Door stopper, top rail, Nylon thumb turn indicator, F-channel, Corner CAP, Screws wall plugs & Noise Tape, SS Brackets. Thickness of comact laminate for unrinals of sized 12mm: Door 600mm x 1785mm Divider height for urnials ( 6 Nos) having height 1820mm, Overall height 1995 mm(including 150mm Groujnd Clearance) etc including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 358 | Supplying installation testing and commissioning of STP/ETP of appropriate technology including civil works (except plant room), tertiary treatment etc for the buildung/campuss including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 359 | STP plant upto 50 KLD |
| 360 | ETP plant upto 15 KLD |
| 361 | Boring / drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, including carrriage of material upto all leads and lifts and as per direction of Engineer in charge.e, upto 90 metre depth below ground level.300 mm dia |
| 362 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, including carrriage of material upto all leads and lifts and as per direction of Engineer in charge., beyond 90 metre & upto 150 metre depth below ground level.300 mm dia |
| 363 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. 100 mm nominal size dia |
| 364 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc including carrriage of material upto all leads and lifts and as per direction of Engineer in charge.100 mm nominal size dia |
| 365 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 366 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 367 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. Gravel 1.5 mm to 2 mm |
| 368 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 369 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. |
| 370 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, including carrriage of material upto all leads and lifts and as per direction of Engineer in charge..100 mm nominal size dia having minimum wall thickness 5.00 mm |
| 371 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, including carrriage of material upto all leads and lifts and as per direction of Engineer in charge.100 mm nominal size dia |
| 372 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., including carrriage of material upto all leads and lifts and as per direction of Engineer in charge.Details of cost for 8 Hours |
| 373 | Providing & installation of Submersible Water motor pump- 1 hp,heavey duty with float switch and 10metre cable (2 inch delivery,13 metre heade) in the bore well for lifting water to water storage tank make KIRLOSKAR Or equivalent , all complete, including hire as per requirement and including carrriage of material upto all leads and lifts and as per direction of Engineer in charge.. Water moter pumpss in the bore well for lifting water to water storage tank |
| 374 | \\"Supply, installation, testing & commissioning of PVC pipes IS: 4985, 10 kg/cm and fittings including trench excavation & re-filling with same soil 450 -300 mm deep.i/c Providing & fixing of Pop-up sprinkler.,Pop up of 1/2\\"\\" inlet with Plastic Riser, Anti Drain Valve & Locking cover, Ratcheting Slip, Clutch. BSP. UV-,Clamp P.P.Saddle Tee 75, 63, 40mm x3/4\\"\\",Fixing of Valves and Filtration Unit,Providing & Fixing of Automation Unit including pump set Sunitable to deliver 5 LPS at 58 Mtr. Head at Ground complete as per detailed quantity & specifications given below.\\"Supply, installation, testing & commissioning of PVC pipes IS: 4985, 10 kg/cm and fittings including trench excavation & re-filling with same soil 450 -300 mm deep.75mm OD- 10.0 kg/cm² ( 522.00 Rmt)63mm OD- 10.0 kg/cm² (480.00Rmt)40mm OD- 10.0 kg/cm² (1710 Rmt)Sprinklers, and Accessories\\"Providing & fixing of Pop-up sprinkler. Built to accommodate Lower pressure with radius of throw 25 to 20 ft. & flow of 0.76 to 9.63 USGPM at operative pressure of1.72 to 4.48 Bar (25-65 PSI), the sprinkler shall be gear driven rotary type full & part circle (40-360 degree) in one,5'' pop-up hight,having 20mm(3/4\\"\\") Female threaded inlet, Check-O-Matic maintains up to 2.8m (8'), with 12 nos. Nozzle tree for trajectory 8 nozzle for standard 25 deg. and 4 nozzle for 10 deg.The body of sprinkler is ABSplastic & non - corrodible. (TORO/Eq. Make) (160 Nos)\\"\\"Supply Installation, Testing & commissioning of Pop up of 1/2\\"\\" inlet with Plastic Riser, Anti Drain Valve & Locking cover, Ratcheting Slip, Clutch. BSP. UV-resistentplastic Pop up Spray 2 m to 5.5 m Radius (Full/Part) (210 Nos)\\"\\"Supply Installation, Testing & commissioning of Swing joints (Pop up ConnectingAssembly) 1/2 (380Nos)\\" |
| 375 | \\"Supply Installation, Testing & commissioning of Clamp P.P.Saddle Tee 75, 63, 40mm x3/4\\"\\" (390Nos)\\"Providing & Fixing of Valves and Filtration UnitSupply Installation, Testing & commissioning of PVC Ball Valves PN16, 63 mm Dia (15 Nos)Supply Installation, Testing & commissioning of Air Release Valve PN10 2\\" (3 Nos)Supply Installation, Testing & commissioning of Clamp P.P.Saddle PN10 Tee 75 X 2\\"(18 Nos)Supply Installation, Testing & commissioning of 10\\" Round Valve Box with cover (13 Nos)\\"Supply Installation, Testing & commissioning of 12\\"\\" Rectangular Valve Box with (15 Nos)cover\\"Supply Installation, Testing & commissioning of Disc Filter 3\\" (50m³/hr) Amiad Isreal ( 1 Nos)Supply Installation, Testing & commissioning of Pressure Gauze (glycerine filled) (1 No)\\"Supply Installation, Testing & commissioning of Pressure Relief valve 2\\"\\" with ( 1 No)Acessories\\"Providing & Fixing of Automation Unit\\"Supply Installation, Testing & commissioning of Solenold Valve 2\\"\\" BSP wlth Ilow control, manual bleed, 6 5S nuts grip into bonnet. 200 psi rated for heary duty applications, glass filled nylon body with 8 molded in brass studs, a SS metering rodand hish-erade PVC bonnet.(15 Nos)\\"\\"Supply Installation, Testing & commissioning of 16 Statron Turf Controller, 220 VAC 50Hz. havlng 3 independent program, 3 start time per program, scheduling options to suit the needs of plant material or to comply with watering restrictions, leap year compatible, advance water budget to set water budget for each month ofthe year, 3 test cycles, programmable run times from 1 minute to 5 hours 59 minutes, poly-fuse self resetting circuit protection.Rates are inclusive of control cable Interconnection withirrigation pump starter and commissioing of pump automation.( 1 Nos)\\"\\"Supply Installation, Testing & commissioning of #14 AWG Copper Conductor DirectBurial Single Core Cable (White) (1800 Nos)\\"\\"Supply Installation, Testing & commissioning of #16 AWG Copper Conductor DirectBurial Single Core Cable Red (10600 Nos)\\"\\"Supply Installation, Testing & commissioning of DBR/DBY series water proof wireconnector with splices (34 Nos)\\" |
| 376 | PUMPING STATION to be installed in STPSupply Installation of a pump set Sunitable to deliver 5 LPS at 58 Mtr. Head at Ground ( Nos)\\"Supply Installation of control panel complete with single phase priventer ,MCB, star delta starter ampere & volt meter indicating lights auto start for two pumps and water ( 1 No)level controller etc. (Suitable for Indore Installation) (1W+1S)\\"Supply Installation of Suction and Delivery Header Pipe & Fittings for (1W+1S) One setSupply Installation of 4 Sq. mm 3 Copre Copper Power Cable (30.00Rmt)Supply, installation, testing & commissioning of PVC pipes IS: 4985, 10 Per Kilogramme/cm and fittings including trench excavation & re-filling with same soil 450 -300 mm deep.i/c Providing & fixing of Pop-up sprinkler.,Pop up of 1/2\\" inlet with Plastic Riser, Anti Drain Valve & Locking cover, Ratcheting Slip, Clutch. BSP. UV-,Clamp P.P.Saddle Tee 75, 63, 40mm x 3/4\\",Fixing of Valves and Filtration Unit,Providing & Fixing of Automation Unit including pump Per Set Sunitable to deliver 5 LPS at 58 Mtr. Head at Ground complete as per detailed quantity & specifications given below.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (i).Supply, installation, testing & commissioning of PVC pipes IS: 4985, 10 Per Kilogramme/cm and fittings including trench excavation & re-filling with same soil 450 -300 mm deep.75mm OD- 10.0 Per Kilogramme/cm² ( 522.00 Per running Metre) 63mm OD- 10.0 Per Kilogramme/cm² (480.00Per running Metre) 40mm OD- 10.0 Per Kilogramme/cm² (1710 Per running Metre)Supply, installation, testing & commissioning of PVC pipes IS: 4985, 10 Per Kilogramme/cm and fittings including trench excavation & re-filling with same soil 450 -300 mm deep.i/c Providing & fixing of Pop-up sprinkler.,Pop up of 1/2\\" inlet with Plastic Riser, Anti Drain Valve & Locking cover, Ratcheting Slip, Clutch. BSP. UV-,Clamp P.P.Saddle Tee 75, 63, 40mm x 3/4\\",Fixing of Valves and Filtration Unit,Providing & Fixing of Automation Unit including pump Per Set Sunitable to deliver 5 LPS at 58 Mtr. Head at Ground complete as per detailed quantity & specifications given below.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (i).Supply, installation, testing & commissioning of PVC pipes IS: 4985, 10 Per Kilogramme/cm and fittings including trench excavation & re-filling with same soil 450 -300 mm deep.75mm OD- 10.0 Per Kilogramme/cm² ( 522.00 Per running Metre) 63mm OD- 10.0 Per Kilogramme/cm² (480.00Per running Metre) 40mm OD- 10.0 Per Kilogramme/cm² (1710 Per running Metre) including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 377 | Supplying and Fixing Acrylic Signage size (300x450mm) indicating Male/Female Wahrooms, Directional, FIre Exit, Rooms,Lifts,Classrooms etc of approved quality Door Mounted/Wall Mounted as per design and drawings complete as per direction and to the entire satisfaction including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 378 | Supplying, Fabricationg and Fixing of Acrylic Signage on featured wall including neon lights as per design and drawings including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 379 | Design, supply, fabrication and fixing of Signage board (6.00x1.20m.- 1 no.) using words made of acrylic cut out letters with LED and reflective vinyl sheet as per approved design with following specification. a) Board shall be fabricated with 3 mm thick ACP sheets of Indobond or equivalent make. Powder coated Aluminium sheet shall be fixed from the rear side of the entire board to make box section. b) Rafting Complex Matter Logo letters (Hindi and English) shall be made of Acrylic cutout letters of ACAST or equivalent make and shall be uniformly illuminated by using Digital LED light of Samsung or equivalent make. c) Powder coated Aluminum clips and brackets shall be used of minimum 3 mm thickness as per direction of Engineer In charge. d) Words of other matter of the signage board shall be fixed using reflective vinyl cut out letters of MACTEC or equivalent make. |
| 380 | Providing and fixing of kangra art miniature ,heritage paintings of standard size showing pictorial art of kangra ,phari painting with wooden frame complete as per direction and to the entire satisfaction including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 381 | Supplying, Fabricationg and Fixing of Acrylic Signage on featured wall including neon lights as per design and drawings including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 382 | P/F ENTRY PYLON SIGNS Size: 25 ft. Height Structure MS Channel 100 x 5mm, ACP Cladding 3mm Aluminium Piping, Router Inner Cut Letters/3D Letters, with Acylic 3mminside/Outside Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 383 | P/F WAY FINDING PYLON Size: Plyon Height 8 FtStructure MS channel 35 x 5 mm, ACP cladding 3 mm outdoor grade with aluminum piping, router inner cut letters, with acrylic 3 mm inside and 10 mm on top Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 384 | P/F RECEPTION Size: 10 x 6 ft. Corian Surface engraved with resin filling Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 385 | P/F RECEPTION VIDEO WALL Size: 10 X 8 FTLed 2.5mm Pitch, Indoor Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 386 | P/F MONUMENT SIGNS Size: 12 ft. Tall, Brick/Metal with letters with top lit or hallow effect – 10 mm Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 387 | P/F FACILTY SIGNS/DOOR PLATES Quality: Aluminum (PU Paint coated)Size: 14” x 12”Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 388 | P/F FLOOR DIRECTORY SIGNS Size: 6 ft. Height Brass Etching / Brass LettersMake P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 389 | P/F FLOOR DIRECTORY SIGNS Size: 6 ft. Height Aluminum Plate 8 mm with PU Paint Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 390 | P/F PARKING STANDING ALONE Size: A3 Size – Pole Height 4 FtSteel pole with direct UV printing of ACP Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 391 | P/F WAYFINDING SIGNAGE FLANGE/ WALL MOUNT Size: 3 Ft Width on SidePre fabricated aluminum channel of 15 mm depth acrylic 3 mm in front Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 392 | P/F AWARENESS SIGNAGE DIGITAL INDOOR Size: 5 x 2.5 FtMS structure-led 2.5 mm pitch indoor, nova Hardware Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 393 | P/F PARKING FLAG POLES Size: 1.5 X 5 FTFixing On Existing Pole With C Clamps Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 394 | P/F PARKING MARKING Size: RFT Thermo reflective paint Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 395 | P/F MANDATORY SIGNAGE Size: As per NormsPre Fabricated Light Signage 4 Hrs. Backup Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 396 | P/F VINYL WRAPS Size: SQFT 3 mm make vinyl with HP latex printing Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 397 | P/F BOUNDARY WALL MESH SIGNAGE Size: 2500 SQFTMesh 3 mm aluminum - with direct UV printing Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 398 | P/F POLE DIRECTION SIGNS Size: 4 x 2 ft., Pole Height 6 ft. Steel Pole with Aluminum Plates PU Paint/ Direct UV Printing Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 399 | P/F TOUCH SCREEN KIOSK Size: Touch Pannel 48\\"Samsung Assembled Make P.s.& Sons or Equivalent including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 400 | Supplying and Fixing Acrylic Signage for disabled persons , size (300x450mm) indicating Male/Female Wahrooms, Directional, FIre Exit, Rooms,Lifts,Classrooms ,disabled toilet , handicapped car parking and other mandatory signages etc of approved quality Door Mounted/Wall Mounted as per design and drawings complete as per NBC Standards & direction complete including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 401 | Supplying and Fixing high contrast braille Acrylic Signage for disabled persons , size (300x450mm) indicating Male/Female Wahrooms, Directional, FIre Exit, Rooms,Lifts,Classrooms ,disabled toilet , handicapped car parking and other mandatory signages etc of approved quality Door Mounted/Wall Mounted as per design and drawings complete as per NBC Standards & direction complete to the entire satisfaction of the Engineer-in-Charge/Project Manager |
| 402 | Providing and installation and commissioning of 2 number water falls and 9 Nos Bubblers in each Per Set with the following specifications.complete including all civil work and carriage of material upto all leads and lifts and as per direction of Engineer in charge. Supply ,installation ,testing and commissioning of sand filters 650mm dia Aqvastar make or equivallent top mount double in flow diffuser, gilter glass commercial sand filter, inner diameter 650mm , bed depth 295mm and filter area of 13Per cubic Metre /LPH for water fall and 9 nos foaming bubblers complete in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 Nos)Supply ,installation ,testing and commissioning of 6-way Multi -port valve,manual operation of required size as per drawings ,Make Aqvastar or equivallent complete in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 Nos)Supply ,installation ,testing and commissioning of filter media comprised of superior quality gravel and sand media for 650mm dia filter complete in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 job)Supply ,installation ,testing and commissioning of horizontal multistage self priming centrifugal pumping Per Set of 1.5hp ,single phase of make Aqvastar or equivallent complete in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager. PUMP FOR TRICKLING WATER FALL Supply ,installation,testing and commissioning of pump for trickling waterfall of imported little pump of approved quality and brand 500 watt model no HDS-5033 made in Italy( Qty. 1 Nos)FOAMING BUBBLER NOZZLE Supply ,installation ,testing and commissioning of foaming bubbler nozzles imported quality,Euorpean foaming Bubbler Nozzles stainless steel 304 grade fountain nozzle made of stainless steel 304 grade and inner part of ABS Plastic inlet size 1 inch complete as in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 9 Nos)Supply,installation,testing and commissioning of swing joint 1 inch size made of brass as per drawing,make KMC INDIA or equivallent complete as in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge/Project manager( Qty. 9Nos |
| 403 | Supply,installation,testing and commissioning of brass control valve 1 inch size ISI marked as per drawings complete as in all respects including carriageand cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge/Project manager( Qty. 9 Nos)FABRICATED WATER FALL CHANNEL Supply,installation,testing and commissioning of stainless steel fabricated channel for water fall size 6 inch length,12 inch breadth and height 12 inch or as per drawing made of stainless steel sheet 304 grade with argion welding complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge/Project manager( Qty. 3 Nos)ELECTRICAL CONTROL PANNEL BOARD Supply,installation,testing and commissioning of suitable electrical pannel including making necessary connections for running the pumps with a provision of contractors,push buttons,connections strips , fuses, indicating lamps of rupited make such as L& T/Siemens/AE/Crompton/EE or equivallent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 Nos)UNDER WATER LED LIGHT (12V ,6W)Supply ,installation ,testing and commissioning of high reflected low consumption single colour under water led lights (12v,6 w),IP 68,size :-dia 70m height 100 mm high quality aluminium pressure die casting body , surface oxidated coating with heat resistant and tempered glass , high quality transparent silicon epoxy field inside the light to protect from heat and water. Make CREE USA complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 25Nos)LED LIGHT (12V,10WATT)Supply ,installation ,testing and commissioning of LED lights 12 volts ,10 watts, fallselling COB light make Phollips or equivallent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty.9 Nos)UNDER WATER LED LIGHT 24V,20WATT Supply ,installation ,testing and commissioning of under water LED Lights 24volt,20watt, high reflection , low consumption micro-processor based LED light with inbuilt heat resisyance sensor , made of stainless steel grade 316 make CREE USA complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 4 Nos) |
| 404 | Providing and installation and commissioning of Swimming Pool Filtration System Main Pool Size : Length 40Ft x Width 20Ft x Depth 4 Ft Main Pool Water Capacity: 89600 Ltr Children Pool Size A : Length 20Ft x Weidth 10ft X Depth 2 Ft Children Pool A Water Capacity-: 11200/- Ltr Balancing Tank Size: 12 ftx 10ft x 4ft Balancing Tank Capacity: 10000 Total Water: 110800 Approx. Filteration Time: 2 hrs. Filter Size: 900 MM, Qty- 2 Nos Filter Size: 650 MM, Qty- 1 Nos with the following specifications including civil and other Electrical work, designing and executing at site as per the direction of Engineer in Chargecomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.(SAND FILTERS 900 mm DIA Make Aqvastar Singapore ) 2 Nos Supply of Side mount double inflow diffuser, gilter glasscommercial sand filter with manual 6 way multiportvalves inner dia 900 mm dia, bed depth 440 mm, Valve size 63mm for flow of 30 Per cubic Metre/hr and filter area of 0.64Per Square Metret complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. MULTI-PORT VALVE Make Aqvastar Singapore 6 way Multi-port valve, manual operation, Qty 2 Nos)FILTER MEDIA Gravel and sand media for 900 mm dia filter.( Qty 2 Nos) SELF PRIMING 3HP PUMP Make Aqvastar Singapore Horizontal multistage self priming centrifugal pumping Per Seteach of capacity 30 Per cubic Metre/hr of 3.0 HP, Three Phase , ofMake Aqvastar Singapore with prefilter, glass filledthermoplastic protection & automatic rePer Set A.C. electricsupply complete with enclosed fan cooled motor, barrelunion 63 mm, suction stainers & necessary valves complete for drawing water from raw water tank &supply to treatment plant. complete in all resp ( Qty 2 Nos) SAND FILTERS 650 mm Dia Aqvastar Supply of Top mount double inflow diffuser, gilter glass commercial sand filter, inner dia 650 mm dia,bed depth 295 mm and filter area of 12 Per cubic Metre / LPH of Make Aqvastar ( Qty 1 Mtr) filter media Gravel and sand media for 650 mm dia filter ( Qty 1 Nos).MULTI-PORT VALVE, Aqvastar 6 way Multi-port valve, manual operation, Make Aqvastar *( Qty. 1 Nos)SELF PRIMING 1.5 HP PUMP Supply of Horizontal multistage self priming centrifugal pumping Per Set of 1.5HP, Single Phase, of Make Aqvastar ( Qty. 1 Nos)SWIMMING POOL S.S. 304 LADDERS Swimming pool ladders in S.S. 304 having antiskid design (Imported) 4 Step with anchor & complete accessories as required. |
| 405 | ( Qty. 2 Nos)Swimming pool ladders in S.S. 304 having antiskid design(Imported) 2 Step with anchor & complete accessories as required.( Qty. 2 Nos)RETURN INLETS Supply of Each floor inlet shall be made from unalterable ABS UV resistant with 2\\" side connection and shall be distributed evenly on the bottom floor of the pool. Each floor inlet shall have a maximum discharge capacity of 14m3/hr with a facility to regulate the flow through each inlet. The outlet flow through each floor inlet shall be radial instead of vertical. These floor inlets shall be fixed on the bottom pipe and shall distribute the filtered water back to the pool.( Qty. 30 Nos)CONTROL PANEL BOARD Supply of Suitable electrical panel including making necessary connections for running the following pumps with a provision of contractors, push buttons, connection strips, fuses, indicating lamps of reputed make such as L&T/Siemens/AE/Crompton/E.E or equivalent makecomplete in all respects.( Qty. 1 Nos) 3 HP Pumps 2 Nos. 1.5 HP Pumps 1 Nos. SMPS Provision 3 Nos OVERFLOW ABS GRATING MAKE CWG Supply of Overflow grating in ABS 12\\" in white colour flexible suitable for all straight & curved pools.( Qty. 50 Mtr) ABS MAIN DRAIN Supply of ABS main drain/Grating/ Jali made of ABS on pool side and required no. Of holes complete in all respect.( Qty. 5 Nos)PVC PIPE & ACCESSORIES All the pipes and fittings For main pool are PVCu. These pipes are designed to handle a pressure of 10 bar and the fittings are capable of handling a pressure of 6 Per Kilogramme/cm2 . These all are high rated to handle burst pressures even though the system works at 2.5 bar.( Qty. 1Per Set)UNDERWATER LED LIGHT FOR SWIMMING POOL Underwater 24V, 20 Watt, High reflection, low consumption miro-processor based LED light with, made of Stainless steel Grade SS-316 with heat resistance sensor in built. Complete in all respect. Make Cree USA( Qty. 16 Nos) POWER SUPPLY Power Supply ( SMPS) for the requried capacity (24V 150W) ( Qty. 3 Nos)CABLE FOR LIGHT 1.5 mm 2 core cable ISI mark with PVC Pipe. Make - KEI.( Qty. 300 Mtr)CABLE FOR Pump 2.5 mm 3 core cable ISI mark with PVC Pipe. Make - KEI ( Qty. 20 Mtr)BUTTERFLY VALVE 90 mm PVC Butterfly Valve with Flange & Nut bolt Make Automat( Qty. 4 Nos)i 63 mm PVC Butterfly Valve with Flange & Nut bolt Make Automat ( Qty. 2 Nos)NON RETURN VALVES 90 mm PVC Non return Valve MAKE PIMTAS ITALY( Qty. 2 Nos) 63 mm PVC Non return Valve MAKE PIMTAS ITALY( Qty. 2 Nos)NSTALLATION,TESTING AND COMMISSIONING CHARGES( Qty. 1 Job)CIVIL WORK CONSULTANCY CHARGES( Qty. 1 Job)FREIGHT CHARGES ( Qty. 1 Job)ALL Items Above are components of the Complete Job including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 406 | VERTICAL JET FOUNTAIN AT WILLNESS CENTER NADAUN HP SAND FILTERS 900 mm DIA Make Aqvastar Singapore )Supply of Side mount double inflow diffuser, gilter glass commercial sand filter with manual 6 way multiport valves innerdia 900 mm dia, bed depth 440 mm, Valve size 63mm for flow of 32.2 Per cubic Metre/hr and filter area of 0.64 Per Square Metret( Qty. 3 Nos)MULTI-PORT VALVE Make Aqvastar Singapore 6 way Multi-port valve, manual operation,( Qty. 3 Nos)FILTER MEDIA Gravel and sand media for 900 mm dia filter.( Qty.3 Nos) SELF PRIMING 3HP PUMP Make Aqvastar Singapore Horizontal multistage self priming centrifugal pumping Per Set each of capacity 35.8 Per cubic Metre/hr of 3.0 HP, Three Phase , of Make Aqvastar Singapore with prefilter, glass filled thermoplastic protection & automatic rePer Set A.C. electric supply complete with enclosed fan cooled motor, barrel union 63 mm, suction stainers & necessary valves complete for drawing water from raw water tank & supply to treatment plant. complete in all respect.( Qty. 5 Nos)VERTICAL JET NOZZLE Heavy duty Brass Vertical Jet Nozzle nical plated inlet size 1\\".( Qty. 50 Nos)SWING JOINT Swing Joint 1\\"Size Brass Made complete in all respect Make KMC INDIA( Qty.50 Nos) CONTROL VALVE Brass Control valve 1” ISI Mark ( Qty.50 Nos) SERVICE SHADDLE HDPE + BRASS SERVICE SHADDLE 63MM X 32MM ( Qty.50 Nos)STAINLESS STEEL NIPPLE SS-304 STAINLESS STEEL NIPPLE (1\\" X 6\\")( Qty.100 Nos) SELF PRIMING 3HP PUMP Make Aqvastar Singapore Horizontal multistage self priming centrifugal pumping Per Set each of capacity 35.8 Per cubic Metre/hr of 3.0 HP, Three Phase , of Make Aqvastar Singapore with prefilter, glass filled thermoplastic protection & automatic rePer Set A.C. electric supply complete with enclosed fan cooled motor, barrel union 63 mm, suction stainers & necessary valves complete for drawing water from raw water tank & supply to treatment plant. complete in all respect.( Qty.5 Nos)CONTROL PANEL BOARD Supply of Suitable electrical panel including making necessary connections for running the following pumps with a provision of contractors, push buttons, connection strips, fuses, indicating lamps of reputed make such as L&T/Siemens/AE/Crompton/E.E. or equivalent make complete in all respects.( Qty.1 Nos)3 HP Pumps 5 Nos.SMPS Provision 20 Nos. CENTREHOLE LED LIGHT 12V 18W (WARM WHITE) High Reflected Low Consumption single Color Microprocessor based Under Water Centrehole LED Lights 12 V, 18 Watt , IP 68, Size :- dia 100 m, height 100 mm High Quality Aluminum pressure die casting Body, surface oxidated coating with heat resistant and tempered Glass, High quality transparent silicon Epoxy filled inside the Light to protect from heat & Water.( Qty.50 Nos)POWER SUPPLY Power Supply ( SMPS) for the requried capacity (12V 100 W) of LED Light . Make Mean well( Qty.20 Nos)CABLE FOR LIGHT 1.5 mm 2 core cable ISI mark with conduit pipe. Make - KEI INDIA( Qty.500 Mtr)CABLE FOR LIGHT 2.5 mm 2 core cable ISI mark with conduit pipe. Make - KEI INDIA( Qty.50 mtr)BUTTERFLY VALVES 90 mm PVC Butterfly Valve with Flange & Nut bolt Make Automat( Qty.12 Nos)NON RETURN VALVES 63 mm PVC Non return Valve MAKE AQVASTAR( Qty.5 Nos) MAIN DRAIN ABS main drain inlet size 2\\"( Qty.6 Nos) OMPLETE PLUMBING WORK Complete plumbing material in PVC pipe 10 Per Kilogramme cm2 ISI mark complete with all required accessories TEE, bend, reducer, socket, solvent etc Make Supreme( Qty.1 Lot).PUMP AND FILTER UNION Imported Pump and Filter union 63 mm size.( Qty.20 Nos) CIVIL WORK CONSULTANCY CHARGES ( Qty.1 job) INSTALLATION,TESTING & COMMISSIONING CHARGES( Qty.1 job)FREIGHT CHARGES( Qty.1 job)ALL Items Above are components of the Complete Job |
| 407 | FOUNTAIN WATER PLAZA 9 MTR DIA SEQUENCING STRAIGHT JET WATER BODY - 9 MTR DIA (Water Park)Designing supply installation & testing & Commissioning of Fountain water plaza 9 Mtr. dia sequencing straight jet fountain produce aerated water with pumps & Led luminaries complete in all respect Height of water effect approx 2 Mtr complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. straight jet nozzles - High end Nozzles are made of Brass- nickel/Chrome plated with measured flow approx 45 lpm .(Paai/Rainbow/AIS/Vinayak)( Qty.40Nos)Ball joint for perfect adjustment( Qty.40Nos)Hydraulic system -complete hydraulic system along with manifold & other accessories to get desired outcoome from water feature( Qty.40Nos)control valves to adjust flow pressure of water (various sizes) Gate valves operate by lowering or raising the wedge-shaped disc or gate, which either permits or blocks the fluid flow. (zoloto/NMC/equiv)( Qty.40Nos)0.5 HP openwell monosumbersible pumpPer Set with all fittings (Kirloskar/Crompton/Equiv)( Qty.40Nos)2.5 Per Square Metrem 3 core - copper submersible cable flat Keep fire hazards at bay while ensuring safety and reliability with Flat submersible cables Flexible cables are safe, reliable, fire retardant, fire resistant, lead free, non-toxic cable that is eco-friendly. These cables are flexible to be installed in different locations and offer protection under any cirPer cubic Metrestances. Applications like pumps, motors and various others run perfectly . protection to the entire circuit, appliances and their users, the submersible cables are one of the sturdiest inventions to get your electrical products running smoothly. (For sumbersible pumpPer Sets) havells/Kei/Polycab/Equiv( Qty.200Mtr)2.5 Per Square Metrem 5 core - Copper Control Cables; Size of Conductor: 2.5 sq mm; Core: 5 Core; Conductor Material: Copper (For Lumianries). Make : Polycab/Havells/KEI/Eqv( Qty.200Mtr)RGBW LED lights (not less than 36 W) The housing, top cover and bracket are all in polished stainless steel, fasteners are also stainless steel, Design is extremely compact, Special measures have been taken for protection of components and sealing, totally protected against ingress of water - IP 68 ligght body stainless steel 304 grade ,power LED make edisson/bridgelux 3 watt each,light top diameter 130 mm thicness 3.5 mm toughened glass diameter 93 mm thicness 5 mm waterproof LED light 36 watt (CDT make)( Qty.45Nos)Other fittings & accessories such as cable ties, eflon ,Tapes , connectiong materail , water proof jointing arrangements etc complete in all respect( Qty.1Per Set)Panel comprises of motor main switch,contactors, overload relays, switch fuses, light sequencer, push button on off switches, indicating lamps etc. complete with internal wiring. Lighting system shall be connected by a separate switch and fuse but shall not be energized unless pump is first switched with RGBW Led luminaries control system on.(L&T/BCH/C&S/Equiv) preprogrammed to get aesthetic water feature patterns( Qty.1Nos)ALL Items Above are components of the Complete Job including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 408 | SPIDER SLIDE: Providing , Installation, testing and commissioning of multilane mat slide which descends through high speed intertwining enclosed tubes into a surprise drop . With following operating parameters Design standard :- vehical :-Mat (1-person), Through put (persons)/hrs 120/lane. Dimensions :- 4 unit height 15.00 M, Components 32 inch spider slide Tunnel -R1(63Per running Metre) multile racer single lane -R1 (68Per running Metre . The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect aincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. /Consultant ( A Per Set of 4 Nos)complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ). Shop drawing to be provided by contractor for approval. |
| 409 | 23\\" MULTI RACER SLIDE: Providing and Installation, testing and commissioning of Mat racing slide with a downhill slope wherein the riders in each lane can race with each other sliding head first. (Manufacturing process: RTM) Design standard :- Vehicle Mat (1 person) Throughput (persons/hr) 120/lane Unit nos Qty 2 Ht (m) 3.0 MULTI RACER SINGLE LANE-R1 (21 Per running Metre) The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. including carrriage of material upto all leads and lifts and as per direction of Engineer in charge..( A Per Set of 2 Nos)complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval. |
| 410 | 32\\" OPEN BODY SLIDE:Providing and Installation, testing and commissioning of open body slide has been perfected to create thrill with various twists and turns. (Manufacturing process: RTM) OPERATING PARAMETERS:Design standard :- Vehicle Body (1 person) Throughput (persons/hr) 120-150 Qty 49 metres Ht(m) 9.0 metres. The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. including carrriage of material upto all leads and lifts and as per direction of Engineer in charge.Length 49 metres. ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval. |
| 411 | 32\\" CLOSED BODY SLIDE:Providing , Installation, testing and commissioning of This closed body slide has been perfected to create thrill with various twists and turns. (Manufacturing process: RTM) Design standard :-Vehicle Body (1 person) Throughput (persons/hr) 120-150 Qty 50 Per running Metre, Ht(m) 9.0 Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge.A Per Set of 50.00 Per running Metre) The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of six to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant.( A Per Set of 50 metres )complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval. |
| 412 | TOTS BOP GALVANISED STEEL:Providing , Installation, testing and commissioning of Spray Slides. Spray height 03 Mtr. Ht. Design standard :- Vehicle Body NA Throughput NA Qty1 Ht(m) NAThe water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications , ForTots BOP galvanised steel shall confirm to the standard specifications . The item includes all support/ erection , civil works including painting etc.including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. .complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent). Shop drawing to be provided by contractor for approval. |
| 413 | 96\\" FAMILY RIDE: Providing and Installation, testing and commissioning of a high thrill Slide. (Manufacturing process: Hand Layup) Design standard :- Vehicle Body 3-4 seater (body) Throughput (persons/hr) 150-250 Qty19 mtr. Ht(m) 3.0 The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant .( A Per Set of 19 metres)complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval. |
| 414 | LAZY RIVER MECHANISM (415 V):Providing, Installation, testing and commissioning of a water mass with shallow pool that flows just like a natural river. Consist of Mechanism per stn, 415 VOLTS@ 50 Hz with FRP ducting, GI flapper box. The quantity mentioned in the table below represents the no. of pumps station. Design standard :- Vehicle Body 1-2 seater float Throughput (persons/hr) As per design capacity Qty of RIVER PROPULSION 19 No, Ht(m) NA The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant.( qty :- Job as per drawing)complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval. |
| 415 | RAIN DANCE- JUNGLE THEME: Providing, Installation, testing and commissioning of Themed rain dance creates an entertaining platform with dance to the latest music hits while being drenched in Design standard NA Vehicle Body Throughput (persons/hr) 70-80 Qty1 Ht(m) NA . Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge The item includes all support/ erection , civil works, Flooring including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge/ Consultant.( qty :- Job as per drawing) complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) . Shop drawing to be provided by contractor for approval. |
| 416 | 50 HP WAVE POOL MECHANISM (415 V):Providing , Installation, testing and commissioning of 50 HP wave pool mechanism 415 volts , for generating waves into waterbody. Consist of 50 HP, 415 volts@ 50 Hz with FRP ducting, GI flapper box & axillary Design standard NA Vehicle 1-2 seater body/float Throughput (persons/hr) As per design capacity Qty1 Ht(m) NA . The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval. |
| 417 | TOTS WHEEL (DOUBLE) SS DOM: Providing and Installation, testing and commissioning of Spray Slides are water elements to engage the kids and add fun quotient to the park.3.8 Mtr. Ht. Design standard EN 1176 Vehicle NAThroughput (persons/hr) NA Qty1 Ht(m) NA . Complete in all respect as per direction and to the entire satisfaction of Engineer in Charge. |
| 418 | TOTS GIRAFFE-1 GALVANIZED STEEL:Providing and Installation, testing and commissioningSpray Slides are water elements to engage the kids and add fun quotient to the park.3.1 Mtr. Ht.Design standard EN 1176 Type 1.1 ,Vehicle &Throughput (persons/hr)not applicable complete in all respect as per direction and to the entire satisfaction of Engineer in Charge. |
| 419 | MUSHROOM UMBERELLA (2.1 m) GALVANISED STEEL:Providing and Installation, testing and commissioningSpray Slides are water elements to engage the kids and add fun quotient to the park. 3.36 Mtr. Ht. Design standard EN 1176 Type 1.1 ,Vehicle &Throughput (persons/hr)not applicable complete in all respect as per direction and to the entire satisfaction of Engineer in Charge. |
| 420 | RAINBOW TUNNEL SS DOM:Providing and Installation, testing and commissionin a set of four Spray Slides are water elements to engage the kids and add fun quotient to the park.2 Mtr. Ht. Design standard with operation parameters i.e EN 1176 Type 1.1 ,Vehicle &through put (persons/hr)not applicable complete in all respect as per direction and to the entire satisfaction of Engineer in Charge.(A set of 4 Nos) |
| 421 | TILTING CONES GALVANIZED STEEL:Providing, Installation, testing and commissioning of Tilting cones galvanized steel / Spray Slides. Consists of 4 cone. 3.63 Mtr.Design standard with operation parameters :- Vehicle & through put (persons/hr)not applicable complete .The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval. |
| 422 | TOTS ROUND SS DOM:Providing , Installation, testing and commissioning of Tots Round SS dom / Spray Slides. 2.87 Mtr. Ht.Design standard with operation parameters :- Vehicle & through put (persons/hr)not applicable complete.The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval. |
| 423 | TOTS KINK SS DOM:Providing and Installation, testing and commissioning of Tots kink SS dom / Spray Slides . 2.68 Mtr. Ht.Design standard with operation parameters :- Vehicle & through put (persons/hr)not applicable complete.The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ). Shop drawing to be provided by contractor for approval. |
| 424 | TOTS BUTTERFLY SS DOM :Providing , Installation, testing and commissioning of Tots Butterfly SS dom / Spray Slides .2 Mtr. Ht.Design standard with operation parameters :- Vehicle &through put (persons/hr)not applicable complete.The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ). Shop drawing to be provided by contractor for approval. |
| 425 | Customized WAPS with Theme: Providing, Installation, Testing and Commissioning of customized WAPS with following items 1 Arching I Down Jets (9 jets)2 Bubbler Jets 4 No3 Hose Jets 11 No4 Arching Jets (9 jets) 6 (54)5 Net Bridge 3 No.6 Net Climb 2 No7 Peacock Arching Jets (9 jets) 8 Peacock Hose Jets (5 hoses) 9 Pipe Falls 2 No10 Pull Ropes 4 No11 Single Runnel 1 No12 Colander 1 No13 Spinning Tray 114 Tipping Bucket (1600L) 1 No15 Tipping Cone 7 No16 Umbrella Jets 1 No17 Water Curtain 2 No18 Water Guns 10 No19 Water Slides 4 No20 WaterWheel 2 NoTotal Play Features 62Total Features Including Jets 132.The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval including carrriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 426 | Kids fun K2:Providing ,Installation, testing and commissioning of KIDS FUN k2 as per shop drawing to be provided by the vandor :- Design standard :- Ht(m) 3.0. The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ). Shop drawing to be provided by contractor for approval. |
| 427 | ELECTRICAL INSTALLATIONWIRING IN PVC CONDUIT WITH MODULAR SWITCH & SOCKETS, FANS & FITTINGS Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required . Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 428 | Group A |
| 429 | Group C |
| 430 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required . Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 431 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required . Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 432 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 433 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 434 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (for Light ckt wiring) |
| 435 | 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire (for Light ckt wiring) |
| 436 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (For AC Unit & UPS Point wiring) |
| 437 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (For AC Unit ) |
| 438 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire (For sub main Room of Individual Room ) |
| 439 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 440 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 441 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 442 | 4 X 25 sq. mm + 2 X 6 sq. mm earth wire |
| 443 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 444 | 2 x 16 sq.mm + 1 x 6 sq.mm. earth wire |
| 445 | Supplying and drawing following size of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 446 | 3 X 1.5 sq. mm |
| 447 | 3 X 2.5 sq. mm |
| 448 | 3 X 4 sq. mm |
| 449 | 3 X 6 sq. mm |
| 450 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 451 | 1 Pair |
| 452 | 2 Pair |
| 453 | 4 Pair |
| 454 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 455 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 456 | 20 mm |
| 457 | 25 mm |
| 458 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 459 | 5/6 amps switch |
| 460 | 15/16 A switch |
| 461 | 3 pin 5/6 A socket outlet |
| 462 | 6 pin 15/16 A socket outlet |
| 463 | Telephone socket outlet |
| 464 | TV antenna socket outlet |
| 465 | Bell push |
| 466 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 467 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 468 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 469 | 1 or 2 Module (75mmX75mm |
| 470 | 3 Module (100mmX75mm) |
| 471 | 4 Module (125mmX75mm) |
| 472 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 473 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 474 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos 3 pin 5/6 amps modular socket outlet and 1 no 5/6 amps modular switch, connection etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. (For UPS Computer Point) |
| 475 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 476 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make- Anchor,SSK,Goldmedal |
| 477 | Supplying and fixing batten/angle holder including connection etc. as required complete including all leads and lifts as per direction of Engineer -in -charge. |
| 478 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing ,complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 479 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored). ,complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Jindal Hissar or equivalent |
| 480 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Group C |
| 481 | Supplying,installation,testing and commissioning of Microwave technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.6 mtr and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 482 | Supply, Installation, Testing and commissioning of 30 A Sensor Based Electronic Key Tag Switch Switch complete with all materials like Modular boxes, RIFD Card Reader etc termination of all the incommings ckts etc as per site requiremen. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 483 | Supplying & fixing DLP U - PVC trunking of following size on the surface / ceiling i/c acessories (Covers, bends, Internal Corner, External Corner, Tee, Flat Angle, Joints & End caps) and straight flexible cover and seperator partition etc complete as reqd. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 484 | 50 mm wide X 50 mm deep (1 Compartment) |
| 485 | 100 mm wide X 50 mm deep (2 Compartments) |
| 486 | Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 487 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. (But without MCB/RCCB/Isolator) |
| 488 | 8 way , Double door |
| 489 | 12 way , Double door |
| 490 | 16 way, Double Door |
| 491 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. (But without MCB/RCCB/Isolator) |
| 492 | 4 way (4 + 12), Double door |
| 493 | 8 way (4 + 12), Double door |
| 494 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 495 | Single pole |
| 496 | Double pole |
| 497 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 498 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. 40 A |
| 499 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 500 | 100 A |
| 501 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 502 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 503 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. (For Kitchen & Laundry) |
| 504 | Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. (For Kitchen & Laundry) |
| 505 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Legrand, Schiender, L&T or equivalent |
| 506 | 63 A-100A,18KA,FP MCCB |
| 507 | 100 A-125A,18KA,FP MCCB |
| 508 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 509 | For 8 way, Double door SPN MCBDB |
| 510 | For 12 way, Double door SPN MCBDB |
| 511 | For 16 way, Double door SPN MCBDB |
| 512 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 513 | For 4 way, Double door TPN MCBDB |
| 514 | For 8 way, Double door TPN MCBDB |
| 515 | Supplying, installation, testing and commissioning of recess mounting, TPN TIER Per Phase Isolation/7 Segment , 415 volts, prewired, distribution board of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 100 Amps tinned copper insulated bus bar, common neutral link, earth bar, din bar for mounting MCBs, detachable gland/knock out plate and with built in loose wire box and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of PVC insulated copper conductor up to the terminal connector/neutral link and ready for installation of following ways complete with connections, testing and commissioning etc. as required. DB shall be designed with provision for 8 module as incomer, 2 module as subincomer & SP MCBs as outgoing as per requirement. Inside each DB, a DB chart is to be fixed indicating all out going circuits. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 516 | 8 + 2 way (8+6+36 Module), Double door Distribution Board |
| 517 | 4 + 2 way (8+6+12 Module), Double door Distribution Board |
| 518 | 8 + 2 way (MCCB+6+36 Module), Double door Distribution Board |
| 519 | Supplying and fixing Cable End Box (Loose wire box) suitable for PPI triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 520 | 8 + 2 way (8+6+36 Module), Double door Distribution Board |
| 521 | 4 + 2 way (8+6+12 Module), Double door Distribution Board |
| 522 | 8 + 2 way (MCCB+6+36 Module), Double door Distribution Board |
| 523 | FAN AND FITTINGSSupply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos. blades, 30 cm long down rod, 2 Nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 524 | 1200 mm sweep |
| 525 | 1400 mm sweep |
| 526 | Providing, Installation, testing and commissioning of Heleous BLDC ceiling fan (5 star rating). including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: Complete in all respects including all leads and lifts as per direction of Engineer -in -charge.Ceiling fan 1200 mm Sweep |
| 527 | Providing and installation testing and commissioning of wall fan of following sizes by means of suitable rag-bolt/nuts,connections, testing and commissioning etc. as required: Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. 400mm Wall Fan |
| 528 | Supply, Installation, Testing and Commissioing of Recessed/ Surface Mounted downlighter with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: of following wattage & having system lumen output with system lumen efficacy of 120 lm/W, Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, , Electronic control gear,Protection class II, IP 40, including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. 15 W LED downlighter |
| 529 | Supply, Installation, Testing and Commissioing of Surface Mounted downlighter with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: of following wattage & having system lumen output with system lumen efficacy of 120 lm/W, Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, , Electronic control gear,Protection class II, IP 40, including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. 15 W LED Surface Mounted downlighter |
| 530 | Providing and fixing LED Batten Light of IP40 Led fixture 20 W+/- 1W with Surface Mounted 4 Feet with Polycarbonate diffuser with Extruded aluminium housing having minimum system lumen output 1000 lumens and system lumen efficacy of 100 lm/W with P.F.>0.95 with THD<20% ,CRI 80 .The LED with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. LED Batten light 20 Watts |
| 531 | Providing and Fixing of IP20 LED fixture of 15 watt +/- 1 W LED Recess/ Surface Mounted Downlighter Round/Square Shape with minimum system lumen efficacy of 100 lm/W with Polycarbonate housing,pressure die cast heat sink and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. LED Downlighter 15 Watts Surface/Recess |
| 532 | Providing and fixing LED Surface/Recess type 1X1 luminaire to enhance the delight of occupants with comfortable experience through its classic design and glare free soft illumination ,suitable for surface application with the use of the latest technology 24Watts (2400 Lumen) 5700K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. (With 5 Years Warranty).LED Surface/recess 1X1 Luminaire-24Watts |
| 533 | Providing and Fixing of IP20 LED Strip for Cove light 5 Mtr with driver with minimum system lumen efficacy of 100 lm/W with Polycarbonate housing,pressure die cast heat sink and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required , Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. LED Strip for Cove light 5 Mtr |
| 534 | Providing and fixing of IP65 LED Cupboard light fixture 5 W +/- 1 W Wall Mounted of 1 feet with push switch with minimum system lumen efficacy of 100 lm/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 .The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K only with CRI of minimum 80.The Input voltage range shall be 140V to 280V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required, Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. LED Cupboard light fixture 5 W |
| 535 | Providing and fixing of IP65 Bulkhead led fixture 10 W +/- 1 W Wall Mounted with minimum system lumen efficacy of greater than 100 lm/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 .The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K only with CRI of minimum 80.The Input voltage range shall be 140V to 280V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required, Complete in all respects including all leads and lifts as per direction of Engineer -in -charge . LED Bulk Head 10 Watts |
| 536 | Supplying and fixing of LED Mirror light 10 Watts Round/Rect suitable for input voltage: AC 220-240, 50/60Hz, complete with all accessories, making connections, testing etc. as required, Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. LED Mirror light fixture 10 W . (Including 5Years Warranty). |
| 537 | Supplying and fixing of LED Table Lamp with 3 Step dimming and multifunctional base suurtatile for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories making connections, testing etc. as required, Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. LED Table Lamp (Including 5Years Warranty) |
| 538 | Supply & Fixing of 12 W LED Wall Light Blub complete in all respect., PF>0.95, THD <10% at full load, CRI>80, Avg Life Class 50000Hrs @L70, complete with all accessories making connections, testing etc. as required, Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. LED Wall Light Bulb (Including 5Years Warranty) |
| 539 | Supply & Fixing of Decrotative LED Wall Batten Light complete in all respect., complete with all accessories making connections, testing etc. as required, Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Decrotative LED Wall Batten Light (Including 5Years Warranty) |
| 540 | Supplying, installation, testing and commissioning of Surface/ Recess mounted LED fitting (600 mm x600 mm) made out of CRCA powder coated body having with following specification. (i) Waltage - 36 watt (ii) having system lumen output of 4320 lumens with system lumen efficacy of 120 lm/W (iii) Colour Temperature - 4000 k to 6500 k (iv) CRI (RA) - ≥ 80 (v) System lumens efficiency - ≥ 100 (vi) Life - L70B 50 @ 50000 burning hours (vii) Mandatory test report - LM-79, LM-80. as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 541 | Supplying, Installation, Testing & Commissioning of bathroom mirror light integrated 7 W LED water proof wall fixture IP 44 suitable for 230 V single phase AC supply including making suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 542 | Supplying, Installation, Testing & Commissioning of 250 mm sweep fresh air ventilating fan with aerodynamically designed & balanced bladessuitable for operation on 230 v single phase AC supply complete connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required as reqd.with all accessories as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 543 | Supplying, Installation, Testing & Commissioning of exhaust fans with suitable louvers / bird screen protection and all accessories complete with Aerodynamically designed & Balanced Blade, Dynamically balanced impellers for smooth & vibration-free operation,Pre-lubricated double ball bearing for maintenance free running suitable for operation on single phase AC supply complete connection with suitable size PVC insulated FRLS PVC sheathed copper conductor etc as required as reqd. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 544 | 300 mm sweep, Light duty |
| 545 | 600mm Sweep, Heavy duty |
| 546 | GYSEARSProviding and installation of stationary storage type Electric water heater (Geyser) of by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\\" long, making good the damages, electrical connections, safety valve connections, 4 star rating, testing and commissioning etc. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 547 | 25 Liter capacity water heater |
| 548 | 35 Liter capacity water heater |
| 549 | STORAGE WATER COOLERSSITC of Water Cooler 200 Ltr Storage Capacity and Cooling Capacity 150 Ltr/Hr, With Inbuilt purifier System 4 Tap Stainless Steel of Voltas, Godrej or equivalent. As required, Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 550 | MAIN L.T CUM PLC SYNCH PANEL- WELLNESS CENTRESupply installation testing and commissioning of LT panel Board for the extension of existing panel as per the following specification with proper copper earthing as recommended. The panel should be Designed as per the latest standard IEC 61439. The panel should have Bus bar clearance of 25 mm for Ph to Ph and 19 mm for Ph to neutral, Zero Stray voltage doors and panels, polyester glass support for insulation. The cable alleys should be 300 mm wide and it should be fitted with hinged door that open up to and angle of 95 Deg. The provision of cable entry should be from Bottom. The IP protection of panel should be IP-42 for external and IP2X for internal with 3B as Form of separation. The panel should be equipped with suitable size of CT and display meter for VAF measurement. The panel should be suitable for seismic zone V. the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(Part 1 & Part2 EVAPower system & control or approved make).Make of panel: L&T, ABB , Schneider LT Outgoing should be stuiable IP protection and should have switchgears as below Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make of LV switchgear : L&T (Lauritz & Knudsen), Schneider , Siemens OR Equivalent |
| 551 | Main LT Panel ( TTA TYPE) INCOMER:-2 No 1600 Amp. 4P EDO ACB of 50KA (Ics=Icu) Breaking Capacity1 No 200 Amp. 4P MCCB of 50KA (Ics=Icu) Breaking Capacity3 Set of CT's one of Multifunction Meter3 Set of CT's one 27,47,59,81.3 Set of CT's for APFC relay.3 Set of phase indicating lamps with Single Pole MCB.3 Set of ON / OFF indicating lamps with Single Pole MCB.BUS BARS:-1600 Amps. TP&N Copper bus barsOUT GOINGS:-2 Nos. 800 Amps. FP EDO ACB1 Nos. 400 Amps. FP MCCB2 Nos. 160 Amps. FP MCCB3 Nos. 100 Amps. FP MCCB2 Nos. 63 Amps. FP MCCB2 Nos. 32 Amps. DP MCB1 Set of ON / OFF indicating lamps with Single Pole MCB in each outgoing2 Nos. Space & Spare |
| 552 | Feeder Panel-1 ( Outdoor PTTA Type) INCOMER:-1 No 63 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity1 No. Multi Function Meter.1 Set of phase indicating lamps with Single Pole MCB.1 Set of ON / OFF indicating lamps with Single Pole MCB.BUS BARS:-63 Amps. TP&N Copper bus barsOUT GOINGS:-2 Nos. 40 Amps. FP MCB15 Nos. 16 Amps. DP MCB2 Nos. Space & Spare |
| 553 | Feeder Panel-2 ( Outdoor PTTA Type) INCOMER:-1 No 160 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity1 No. Multi Function Meter.1 Set of phase indicating lamps with Single Pole MCB.1 Set of ON / OFF indicating lamps with Single Pole MCB.BUS BARS:-160 Amps. TP&N Copper bus barsOUT GOINGS:-7 Nos. 63 Amps. FP MCB2 Nos. Space & Spare |
| 554 | Main Street Light Panel ( Outdoor PTTA Type) INCOMER:-1 No 63 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity1 No. Multi Function Meter.1 Set of phase indicating lamps with Single Pole MCB.1 Set of ON / OFF indicating lamps with Single Pole MCB.BUS BARS:-100 Amps. Copper bus bars (25 KA)OUT GOINGS:-6 Nos. 32 Amps. FP MCB2 Nos. 32 Amps. DP MCB2 Nos. Space & Spare |
| 555 | Street Light Panel ( Outdoor PTTA Type) INCOMER:-1 No 32 Amp. 4P MCB of 10KA (Ics=Icu) Breaking Capacity1 No. Multi Function Meter.1 Set of phase indicating lamps with Single Pole MCB.1 Set of ON / OFF indicating lamps with Single Pole MCB.BUS BARS:-40 Amps. Copper aluminium bus bars (25 KA)OUT GOINGS:-2 Nos. 25 Amps. DP MCB24 Nos. 16 Amps. DP MCB |
| 556 | D.G. SYNC PANEL Design, Manufacturing, Supply, Receiving, Unloading, Shifting, Installation, Testing & commissioning of Main LT Panel. The panel will be totally enclosed type with, free standing, floor mounted, indoor duty, dust & vermin proof, compartmentlized, front operated, electrical panel fabricated from 2 mm thick M.S. Sheet as per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indication lamps, CT's, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 70 micron thickness. All the busbar joint shall be protected by clip on type sleeve. The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have changeover facility & interlocking through PLC to achieve electrical interlocking, auto operation of incommer etc and having following incomming and outgoing MCCB, MCB as per the drawing and specification. Fault level shall be 36 KA. The panel should be suitable for seismic zone V. the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139(Part 1 & Part2 EVAPower system & control or approved make).Make of panel: L&T, ABB , Schneider or equivalent(Each Incomming MCCB shall have microprocessor release and variable current setting from front, adjustable overcurrent, short circuit & earth fault protection, front extended lockable handle, pad lockable in off position, shrouding on incomer side, termination shall be suitable for copper bus bars / cables and as per specification.)INCOMING DG - I, II, III & IV4 Nos. 3P 400A 50KA MCCB One set of Generator control relay for Each D.G. Set with accessories for AMF, Load Management, Synchronizing and Interlocking through micro PLC. (Make of relay - Woodword / Dief).4 Nos. TNC SWITCH4 Nos. 3P POWER CONTACTOR 70A |
| 557 | INCOMING METERING4 Nos. DIGITAL LOAD MANAGER WITH RS 485 PORT12 Nos. CT 500/5 CL-1, 15VA TAPE WOUND12 Nos. INDICATING LIGHT LED TYPE,22.5MM, 230V AC-(ON, OFF,TRIP)12 Nos. INDICATING LIGHT LED TYPE,22.5MM, 230V AC- (R, Y,B)12 Nos. CONTROL SPMCB 6A 10KAOver voltage & Under voltage protection microprocessor basedAnnounciation window to cover LLOP, HWT, OIL Pressure, O/V, O/F shall be provided.Engine should trip on LLOP, HWT, oil temp, O/V, O/F and breaker should trip on other faults.Initially U/V & U/F will be bye passed till oil pressure is picked up.Generator start /stop facility through push button from panel, necessary cranking relay shall be provided.Suitable battery charger for 24V 360 AH with d.c voltmeter & d.c ammeter. D.C voltmeter and ammeter will be analouge type.Whenever D.G. stop through PB, load shall be disconnected first. BUSBARS4P 1600A 50KA CU. Bus Bar1 Nos. TNC SWITCH3 NOS. INDICATING LIGHT LED TYPE,22.5MM, 230V AC-(ON,OFF,)3 Nos. CONTROL SPMCB 6A 10KAINSTRUMENTS2 Nos. Digital VAF Meter with CT's.2 Sets of phase indicating lights (RYB) with protection SP MCB's. (one set for each incoming breaker).2 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker).2 Sets trip circuit healthy indicating lamp (one set for each incoming breaker).2 Sets auto trip indicating lamp (one set for each incoming breaker).2 Nos. 6 window announciator with hooter, accept & reset push button. BATTERY & BATTERY CHARGER1 No. 24V, 72AH SMF Battery with suitable battery charger for control supply.AUTO OPERATION OF INCOMER MCCB's.Auto changeover.Micro PLC shall be provided to achieve the Changeover, Interlocking and and following functions. |
| 558 | Changeover of Incommer.Interlocking.Synchronizing of D.G. Set through synchronizing relay OR Synchronizing of D.G. Set through PCC 3.3 controller in case of Cummins Make D.G. Set.Necessary hardware shall be provided to achieve above functions including micro PLC with real time clock, digital inputs/outputs, MMI with 2 line display, power supply, auxillary relays, PB's indication etc. & software for the above.Automatic system shall be user friendly and shall have manual override.Operation logic, control & interlocking scheme shall be prepared by panel manufacturer with coordination of consultants.1 Nos. Hooter1 Nos. Battery ChargerOUTGOINGAll outgoing feeder shall be provide with ON / OFF / Trip indication lamp with protection MCB's.2 Nos. ACB 4P 1600A 50KA electrically operated drawout type ACB complete with O/L, S/C & E/F Themal Magnetic ReleaseDG Sync Panel Described as Above. |
| 559 | MAIN L.T CUM PLC SYNCH PANEL- WATER PARKDesigning, Supply, Installing, testing & commissioning of Powder coated Main Distribution Panel fabricated out of 14-gauge CRCA sheet steel not less than 2.0 mm thick for load bearing members and 1.6mm for doors. in cubical, compartmentalised freestanding floor /wall mounted, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels. Approval shall be taken for each panel before fabrication. (All hardware like nuts and bolts used shall be Stainless Steel) (Note: Vendor can select the next higher fault rating of MCCB if it is not readily available, without any extra cost, as the figure indicated within the bracket are required maximum fault level of that panel)The general construction shall confirm to IS:8623/93 or latest amendment.The panel framework may be angle iron/channel/bolted type construction.All gasket/rubber part shall be Neoprene flame/Dust/Vermin proof.Panels shall have 7/8 tank pretreatment process comprising of Degreasing, Rinsing, De- rusting, Rinsing, Phosphatissing, Rinsing, passivation & Drying followed by powder coat painting having a paint thickness of 60 microns or as specified.Vendor is ensure that the all nuts/bots are properly tighten, All left out holes are closed, Megger testing, Earth testing after the errection.Two Sets of Hard copy of G.A & Circuiting Details shall be submitted by the vendor to Get approval from the Client/Consulatant.The panel builder shall provide fire shunt relay contact in panel wherever necessary/ or as per SLD along with auto / manual mode selector switch on the incomer of one DG set feeder and outgoing feeder in electrical panel etc. to take fire input signal (Potential Free Contact).All relays to operate at 240Volts, Single phase, 50Hz, AC supply through UPS of suitable capacity. The UPS is also in the scope of supply.One DG set shall be on in case of fire so all provisions between DG breaker and fire panel shall be in the scope Vendor. Unloading, Testing, Shifting at appropriate location on site shall be in the scope of vendor.Vendor shall give full technicall support to the contractor and also send their engineers in short notice.All meter shall be with RS485 portAll MCB shall be 10KA\\"In case any descriepency with outgoing numbers in SLD vs BOQ need to be consider SLDonly for outging ampare and numbers.\\" |
| 560 | ALL Electrical Panel Should be BMS Compatible.General Notes:ACB:LSIG ( Microprocessor Based) releases shall be used for transeformer & DG set incoming/outgoing feeders.All Transformer and DG incoming ACBs shall be provided with Microprocessor based releases & ON/OFF/Trip / Spring charged/ready to close indicating lamps/Trip circuit healthy.All ACBs to be provided with ON/OFF/Trip lamps, 3 NO + 3NC Auxiliary contacts other than used in control circuit.All incoming breakers in Main LT panel shall be electrically interlocked, as per inter locking scheme given in SLD.MCCB:MCCBs shall be used with Thermal Magnetic Based releases type for MCCB upto 250A rating and microprocessor based type above 250A rating.All MCCBs shall be provided with Over load & Short Circuit releases. Incoming MCCB shall be provided with E/F releases also.All MCCBs shall be fitted with extended type rotary handles and spreader links and ON/OFF/TRIP lamps Breaking capacity mentioned is Ics value.This BOQ to be read in conjunction with technical specifications and Single Line Diagram (attached for reference). If any discrepancy occurs that should be brought to the notice of Client/Consultant before quoting the price otherwise stringent condition will be deemed to have been considered.All meters shall be digital type (unless otherwise specified)All MCB shall be motor duty type.All current/voltage transformer shall be cast resin type. |
| 561 | All indicating lamps shall be LED type.Current density for Al. bus bars shall not be more than 0.8A/Sqmm. Rating of Bus bar is after considering all derating factors. (Bus bar sizing calculation to be submitted for approval.)All internal control wiring shall be FRLS type.All TP feeders shall be provided with Isolable neutral link.Bus couplers shall be provided with ON & OFF indicating lights but without releases.All feeders shall be provided with door interlocked with door defeat, pad lock facility.Live parts shall not be accessible after opening the door, Transparent sheet, SMC/DMC fire retardant protective shroud to be provided to cover the same.Spare contacts of ACBs / MCCBs / Relay / Contactor shall be wired upto terminal block.All incoming/outgoing cables shall be terminated on links/terminals.Necessary contacts/signal to be provided to the AMF based DG panel. |
| 562 | Connnection from the communication port of all the Meters in Main LT Panel shall be left at one place in a cubical.Panel ventilation shall be in each compartment with suitable size exhaust fan.6/16Amp Switch Socket outlet and LED light shall be provided in each comartment of panelControl supply in Main LT Panel will be 24V DC & 230V AC/24V DC control unit will be provided in the panel as required.MAIN L.T CUM PLC SYNCH PANELIncomers :-Transformer Incomer (1 Nos., 1000 KVA)One (1) Nos. Transformer incomers each shall be provided with the followings switchgear and accessories :-1600 A, 50kA, 4P EDO intelligent motorized ACB, microprocessor based, with overload, short circuit & earth fault releases with IDMT relay and phase sequence relay for transformer with communication ports for RS 485 connectivity.Metering & IndicationMultifunction meter (A.V,kW, kWH, KVA, KVAR, Hz, Harmonic distortion level) with communication ports.1600/5A, Cl-1.0 , 15VA Cast resin CTs (3 Nos.) for metering1600/1A, Cl-5P10,15VA cast resin CT's 4 Nos. for REF Protection. (3 Nos. to be provided in the panel & 1 No. shall be supplied loose along with the panel)1600/5A, Cl-5P10, Cast resin CTs (3 Nos.) for IDMT Relay1600/5A CL-1, 15 VA cast resin CT (2 No.) for APFCRSet of RYB phase indicating lamps protected by 2A control MCB. - 1 SetBreaker ON/OFF/Trip/Spring charged / Ready to close indicating lamps protected by 2A control MCB.Trip Circuit Healthy illuminated push button protected by 2A control MCB.4 Window annunciator with audio/visual alarm and test accept/reset push button. |
| 563 | DG Set Incomer 1NO 320 KVAIncomer from DG set shall be provided with the following switchgear and accessories :-1 No. 630 A,50kA, 4P EDO intelligent motorized ACB, microprocessor based, with overload, short circuit & earth fault releases with IDMT relay and phase sequence relay for each D.G. Set with communication ports RS 485 connectivity. & Provision for automatic mains faliure with relays. & control wiring.Metering & Indication of each feeder :1 sets of R,Y,B phase indicating lamps each with Fuse1 Nos. Load Analyser cum digital Multifunction Meter with 3 Nos. 800/5A, CL-1 CTs, as required.1 Sets of Breaker ON-OFF-TRIP, Spring charged & Trip circuit healthy indication LampsOne (1) set of vibrating reed type frequency meter having range of 45 to 55 Hz.One No. digital KW meter with MDI indicator(Meter scale to suit DG rating)One no. hour run meterVoltmeter & Ammeter of battery/Battery charger system for charging of 180 AH capacity batteries.Battery/charger indication (if integral to DG breaker). |
| 564 | DG running indication.NIC on/off.One (1) No. 8 window audio/visual annunciator system complete with hooter, ack, test and reset PBs for Annunciation of low lube oil pressure, High water temperature, engine over speed, Elect. Protection trip, Engine fail to start, low fuel level faults etc.4 Window annunciator with audio/visual alarm and test accept/reset push button.DG Set Incomer 1NO 500 KVAIncomer from DG set shall be provided with the following switchgear and accessories :-\\"1 No. 800 A, 50kA, 4P EDO intelligent motorized ACB, microprocessor based, with overload, short circuit & earth fault releases with IDMT relay and phase sequence relay for each D.G. Set with communication ports RS 485 connectivity. & Provision for automatic mains faliurwith relays. & control wiring.\\"Metering & Indication :1 sets of R,Y,B phase indicating lamps each with Fuse1 Nos. Load Analyser cum digital Multifunction Meter with 3 Nos. 1000/5A, CL-1 CTs, as required.1 Sets of Breaker ON-OFF-TRIP, Spring charged & Trip circuit healthy indication LampsOne (1) set of vibrating reed type frequency meter having range of 45 to 55 Hz.One No. digital KW meter with MDI indicator(Meter scale to suit DG rating) |
| 565 | One no. hour run meterVoltmeter & Ammeter of battery/Battery charger system for charging of 180 AH capacity batteries.Battery/charger indication (if integral to DG breaker).DG running indication.One (1) No. 8 window audio/visual annunciator system complete with hooter, ack, test and reset PBs for Annunciation of low lube oil pressure, High water temperature, engine over speed, Elect. Protection trip, Engine fail to start, low fuel level faults etc.Master Trip Lockout relay (86)Trip Circuit Supervision Relay (95)4 Window annunciator with audio/visual alarm and test accept/reset push button.Metering & Indication :Multifunction meter (A.V,kW, kWH, KVA, KVAR, Hz, Harmonic distortion level) with communication ports EM 6400 NG300/5A, Cl-1.0 , 15VA Cast resin CTs (3 Nos.) for metering300/5A, CL 5P-10, Cast resin CTs (3 Nos.) for voltage restrained over current relaySet of RYB phase indicating lamps protected by 2A control MCB.Breaker ON/OFF/Trip/Spring charged / Ready to close indicating lamps protected by 2A control MCB.Trip Circuit Healthy illuminated push button protected by 2A control MCB.Bus Coupler1 Nos. 1600 A, 50kA, 4P EDO intelligent, motorized ACB with ON/OFF indication but without releases.Electrical interlocking shall be provided between all the incomers and bus coupler so that two supplies are not mixedup. |
| 566 | Note -\\"The left & right section has to operate in isolation as well as coupled mode. When Bus coupler breaker is ON only one of the incoming breaker can be closed in case of normalsupply.\\"The protection/interlock shall be such that individual buses can be fed individually by TR or DG incoming in all possible operating conditions. Paralleling of grid not permitted.Provision of mini PLC to be made for auto interlocking of Bus couplers.Busbars2000A, 4P aluminium , colour coded insulated bus bars suitable for 415V, 50Hz AC Supply.(For Each Bus Section)Dedicated Bus bar required with the protective shoruds for 110V supply.Outgoing:All outgoings except space for spare's shall be provided the followings accessories :-ON/OFF/TRIP indicating lamps.Multifunction meter (A.V,kW, kWH, KVA, KVAR, Hz) with communication ports for BMS and CT's CL-1 of suitable ratio.2 Nos. 630 Amp Four Pole Moulded Case Circuit Breaker of 50KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection.1 Nos. 400 Amp Four Pole Moulded Case Circuit Breaker of 50KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection1 Nos. 250 Amp Four Pole Moulded Case Circuit Breaker of 36 KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection.2 Nos. 200 Amp Four Pole Moulded Case Circuit Breaker of 36 KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection. 2 Nos. 160 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection.6 Nos. 100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection.DG LOAD MANAGEMENT SECTIONAccessories for Engine Control:Each DG breaker to be provided with :AMF logic with 3 attempt start, restoration circuit, idle running circuit as per specification to be provided including set of relays, timers, Aux. Contactors etc. for meeting auto/manual start/stop & control of engine as per specifications & drawings. In addition, the scheme should be PLC based as described elsewhere.Auto/manual/ test selector switch. |
| 567 | M AIN LT PANEL- HOSTEL BLOCKFabricating, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 125 KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following:sheet steel cubicle type panels fabricated from 14 guage thick CRCA sheet, dust and vermin proof, indoor type MV Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear / bottom access for cable alley and with segregated bus-bar chamber and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, bottom base channel of MS section not less than 100mmx50mmx5mm (thick). Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates powder coated painting of approved shade after antirust treatment (with min seven tanks ) and marking as specified. Switch boards complete as per schematic diagram:Colour: Gray Powder Coated, as per approved sample.Note: All MCCBs of 250 amps and below rating shall be provided with thermal magnetic release & MCCBs above 250 amps rating shall be provided with Microprocessor based release. (All MCCBs shall be fitted with extended type rotary handles and spreader links)1nos, 250 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=100% ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Set with microprocessor release for O/L, S/C & E/F protection.- Mains Supply1nos, 250 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=100% ICU up to 433 V) completewith extended Rotary |
| 568 | Mechanism and Spreader Link Set with microprocessor release for O/L, S/C & E/F protection.- DG Supply1 Nos. 300 Amp. 415 volt AC 3 duty 4 pole contactor - 2nos1 No. 300 A 415V, AC , 4P Manual Changeover with Operating HandleAuto/Manual/Test/Off selector switch2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay.3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for meteringEnergy analyser unit to indicate current voltage frequency power factor and KWHIndicating lamps for load on mains and load on setFuse for instrumentsBattery charger, complete with transformer/rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.Main supply failure monitorSupply Failure TimerRestoration TimerControl unit with three impulse automatic engine start/stop and failure to start lockoutImpulse counter with locking and reset facility.ON/OFF/Control circuit switch with indicatorAudio/Video annunciation for.(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load/maximum load warning |
| 569 | BUSBARTPN aluminum bus bars of minimum of 400 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOING BREAKERS01 Nos 125 Amp Four Pole Moulded Case Circuit Breaker of 16 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Set. For Oudoor AC Panel01 Nos 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Set. For Terrace pumps Panels01 Nos 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Set. For Lift01 Nos.63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Set. For UPS 03 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Set. For Kitchen DB/FF/2 nd Floor02 Nos. 100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Set. For DB & External Lighting02 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. For spare |
| 570 | PUMP ROOM SUB PANELS (FOR FILTERATIONS & SLIDES/ACTIVITY PUMPS) - WATER PARKDesign,Engineering, Fabrication,Supply, Installation, Testing and Commissioning of following Wall mounted / Floor mounted(including base stand), 415V,3PH, 50Hz extensible and fully compartmentalized panels. The indoor panels shall be IP 42 and outdoor panels shall be IP 55 type.The Panel shall have proper space with required clearance for cables, incoming / outgoing switchgear, CTs, PTs, ammeter, Voltmeter, selector switches, Insulated and properly supported compartmentalized bus bars with heat shrinkable sleeves along with the other control circuit accessories within the panel and any other electrical component mentioned in the Panel SLD.The panel shall be fabricated out of CRCA not less than 2.0 mm thick for load bearing members and 1.6mm for the doors of LT panel.The Panel shall have seven tank pre treatment process comprising of degreasing, rinsing, de-rusting, rinsing, phosphatising, rinsing and passivation followed by powder coat painting having a paint thickness of 60 microns or as specified.The Panel shall be Dust/Vermin poof with earth studs as per the SLD and specifications.Supply, installation testing and commissioning of Direct on line starter / Star-delta starters suitable for motors as below mentioned capacities. The starter shall comprise of all necessary power and control equipments including Auto / Manual selector switch, Start/stop push butons, LED indications, Star contactor , delta contactor , timer relay contactor, electronic timer, potential free NO/NC contacts and necessary control wirings properly connected in fully usable state. Minimum utilization catagory for all contactors shall be AC3 and contactor shall be capable to withstand the steady state (full load) and starting inrush current. The starter shall have necessary protection device (MPCB +EOCR) whose settings and ratings shall be as per the type-2. The starter shall have inbuilt protection against overcurrent, short circuit and single phasing.MCCBs shall be used with Thermal Magnetic Based releases type for MCCB upto 250A rating and microprocessor based type above 250A rating.All MCCBs shall be provided with Over load & Short Circuit releases. Incoming MCCB shall be provided with E/F releases also.All MCCBs shall be fitted with extended type rotary handles and spreader links and ON/OFF/TRIP lamps |
| 571 | PUMP ROOM NO 1 (TOTS ACTIVITY & RAIN DANCE)INCOMER 1 nos, 160 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 16 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBARTPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGSFully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder. 3 NOS. 5HP DOL STARTER 7 NOS. 3HPDIRECT ONLINE STARTER\\"40 Amp 4P MCB, 10 KA - 04 Nos. \\"16 Amp DP MCB, 10 KA - 04 Nos. |
| 572 | PUMP ROOM NO 2 (TOWER D)INCOMER 1 nos, 630 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 50 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBARTPN aluminum bus bars of minimum of 750 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGSFully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder. 20 Nos. 20 HP FULLY AUTOMATIC STAR DELTA STARTER3 Nos. 10 HP FULLY AUTOMATIC STAR DELTA STARTER7 Nos. 5 HPDIRECT ONLINE STARTER8 Nos. 3 HPDIRECT ONLINE STARTER\\"40 Amp 4P MCB, 10 KA - 04 Nos. \\"16 Amp DP MCB, 10 KA - 04 Nos. |
| 573 | PUMP ROOM NO 3 (WAVE POOL)INCOMER 1 nos, 400 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBARTPN aluminum bus bars of minimum of 500 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGS1 nos, 160 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 16 KA (ICS=ICU up to 433 V) complete as per specifications detailed above & 1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB ,RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.Fully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder. 2 Nos. 10 HP FULLY AUTOMATIC STAR DELTA STARTER\\"40 Amp 4P MCB, 10 KA - 04 Nos. \\"16 Amp DP MCB, 10 KA - 04 Nos. |
| 574 | PUMP ROOM NO 4 (TOWER C)INCOMER 1 nos, 630 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 50 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 nos, 630 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 50 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBARTPN aluminum bus bars of minimum of 750 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGSFully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder. 6 Nos. 12.5 HP FULLY AUTOMATIC STAR DELTA STARTER4 Nos. 10 HP FULLY AUTOMATIC STAR DELTA STARTER9 Nos. 7.5 HP FULLY AUTOMATIC STAR DELTA STARTER2 Nos. 5 HP DIRECT ONLINE STARTER2 Nos. 1.5 HP DIRECT ONLINE STARTER2 Nos. 4.5 HP DIRECT ONLINE STARTER3 Nos. 5.5 HP DIRECT ONLINE STARTER\\"40 Amp 4P MCB, 10 KA - 04 Nos. \\"16 Amp DP MCB, 10 KA - 04 Nos. |
| 575 | PUMP ROOM NO 5 (FOR UNDER GROUND TANK)INCOMER 1 nos, 200 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBARTPN aluminum bus bars of minimum of 300 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGSFully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder. 4 Nos. 20 HP FULLY AUTOMATIC STAR DELTA STARTER\\"40 Amp 4P MCB, 10 KA - 04 Nos. \\"16 Amp DP MCB, 10 KA - 04 Nos. |
| 576 | LT CABLES , END TERMINATIONS AND LAYINGSupply, testing & commissioning of Aluminium / Copper conductor XLPE. insulated PVC sheathed armoured Cable conforming to IS 7098 Part- 1 ammended upto date as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 577 | 3.5 C x 400 Sqmm XLPE cable Aluminium conductor |
| 578 | 3.5 C x 300 Sqmm XLPE cable Aluminium conductor |
| 579 | 3.5 C x 240 Sqmm XLPE cable Aluminium conductor |
| 580 | 3.5 C x 185 Sqmm XLPE cable Aluminium conductor |
| 581 | 3.5 C x 150 Sqmm XLPE cable Aluminium conductor |
| 582 | 3.5 C x 120 Sqmm XLPE cable Aluminium conductor |
| 583 | 3.5 C x 95 Sqmm XLPE cable Aluminium conductor |
| 584 | 3.5 C x 70 Sqmm XLPE cable Aluminium conductor |
| 585 | 3.5 C x 50 Sqmm XLPE cable Aluminium conductor |
| 586 | 3.5 C x 35 Sqmm XLPE cable Aluminium conductor |
| 587 | 4 C X 25 sqmm XLPE cable Aluminium conductor |
| 588 | 4 C X 16 sqmm XLPE cable Aluminium conductor |
| 589 | 4 C X 10 sqmm XLPE cable Aluminium conductor |
| 590 | 4 C X 6 sqmm XLPE cable Aluminium conductor |
| 591 | 4 C X 4 sqmm XLPE cable Aluminium conductor |
| 592 | 4 C X 25 sqmm XLPE cable copper conductor |
| 593 | 3 C X 35 sqmm XLPE cable copper conductor |
| 594 | 3 C X 25 sqmm XLPE cable copper conductor |
| 595 | 3 C X 16 sqmm XLPE cable copper conductor |
| 596 | 3 C X 10 sqmm XLPE cable copper conductor |
| 597 | 3 C X 6 sqmm XLPE cable copper conductor |
| 598 | 3 C X 4 sqmm XLPE cable copper conductor |
| 599 | 8 C x 2.5 Sqmm PVC Cu Armd. Cable |
| 600 | Supplying and Installation of following size perforated of painting with powder coating M.S. cable trays of perforation of not more than 17.5% in convinient sections, joined with connectors suspended from the cieleing with MS suspenders including bolts and nuts painting suspenders etc as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 601 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 602 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 603 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 604 | MV CABLE JOINTING & END TERMINATIONSupplying and making end termination with brass double compression gland and aluminium/ copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 605 | 3½ X 400 sq. mm (82mm) with Aluminuim lugs |
| 606 | 3½ X 300 sq. mm (70mm) with Aluminuim lugs |
| 607 | 3½ X 240 sq. mm (62mm) with Aluminuim lugs |
| 608 | 3½ X 185 sq. mm (57mm) with Aluminuim lugs |
| 609 | 3½ X 150 sq. mm (50mm) with Aluminuim lugs |
| 610 | 3½ X 120 sq. mm (45mm with Aluminuim lugs |
| 611 | 3½ X 95 sq. mm (45mm) with Aluminuim lugs |
| 612 | 3½ X 70 sq. mm (38mm) with Aluminuim lugs |
| 613 | 3½ X 50 sq. mm (35mm) with Aluminuim lugs |
| 614 | 3½ X 35 sq. mm (32mm) with Aluminuim lugs |
| 615 | 3½ X 25 sq. mm (28mm) with Aluminuim lugs |
| 616 | 4 X 25 sq. mm (28mm) with Aluminuim lugs |
| 617 | 4 X 16 sq. mm (28mm) with Aluminuim lugs |
| 618 | 4 X 10 sq. mm (25mm) with Aluminuim lugs |
| 619 | 4 X 6 sq. mm (25mm) with Aluminuim lugs |
| 620 | 4 X 4 sq. mm (25mm) with Aluminuim lugs |
| 621 | 4 X 25 sq. mm (28mm) with Copper lugs |
| 622 | 3 X 35 sq. mm (28mm) with Copper lugs |
| 623 | 3 X 25 sq. mm (25mm) with Copper lugs |
| 624 | 3 X 16 sq. mm (25mm) with Copper lugs |
| 625 | 3 X 10 sq. mm (22mm) with Copper lugs |
| 626 | 3 X 6 sq. mm (22mm) with Copper lugs |
| 627 | 3 X 4 sq. mm (22mm)with Copper lugs |
| 628 | MV CABLE LAYINGProviding & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Kei, Gloster, Polycab or equivalent |
| 629 | Armoured cable 400 Sqmm(3.5 core) |
| 630 | Armoured cable 35 Sqmm(3.5 core) |
| 631 | Armoured cable 25 Sqmm(3.5 core) |
| 632 | Armoured cable 10 Sqmm(4 core) |
| 633 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 634 | Upto 35 sq. mm |
| 635 | Above 35 sq. mm and upto 95 sq. mm |
| 636 | Above 95 sq. mm and upto 185 sq. mm |
| 637 | Above 185 sq. mm and upto 400 sq. mm |
| 638 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 639 | Upto 35 sq. mm |
| 640 | Above 35 sq. mm and upto 95 sq. mm |
| 641 | Above 95 sq. mm and upto 185 sq. mm |
| 642 | Above 185 sq. mm and upto 400 sq. mm |
| 643 | Upto 35 sq. mm |
| 644 | Above 35 sq. mm and upto 95 sq. mm |
| 645 | Above 95 sq. mm and upto 185 sq. mm |
| 646 | Above 185 sq. mm and upto 400 sq. mm |
| 647 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 648 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 649 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 650 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) |
| 651 | Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) |
| 652 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 653 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 654 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 655 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 656 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 657 | 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 658 | SAFETY ITEMSProviding and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on front side as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 659 | Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 660 | Supply and Erection of MS angle iron bucket stand which include 4 Nos. fire bucket with 9.5 ltr. Capacity with stand filling including cost of welding and painting of complete stand & buckets with one coat of red oxide and two coats of approve paint of red color written with fire on the buckets as per fire protection with all labour and petty material as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 661 | Supply and erection of Rubber Mat of size 2m x 1m x 12 m thick (NS) withstand 15 KV dielectric strength conforming to IS:5424/1969 (IS marked) as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 662 | Supply and fixing in position approved shock treatment chart written in English, Hindi and local language. These charts shall be framed in wooden frame and covered with clear glass of thickness not less than 5 mm as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 663 | Supply and fixing of First Aid box as approved by St. John Ambulance Brigade / Indian red Cross conforming to IS 2217 - 1963 as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 664 | Supplying and fixing Hand Gloves as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 665 | DG SETSProviding, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating set alongwith having Prime Power Rating of below mentioned, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor suitable for synchronizing and consisting of the followings as required.Diesel Engine:Diesel engine 4 stroke liquid cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories.Engine mounted Instrument Panel fitted with and having digital display for following:(i)Start-stop switch with finger touch(ii)Water temperature indication(iii)Lubrication oil pressure indication(iv)Lubrication oil temperature indication(v)Battery charging indication(vi) RPM indication(vii)Over speed indication(viii)Low lub. Oil trip indication(ix)Engine Hours indicationAlternator :Base Frame & FoundationBoth the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.Fuel Tank :Daily service fuel tank of capacity 480 liters/manufacturer standard fabricated with suitable gauge of M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications.Exhaust System :As per Latest CPCB NormsStarting System :12V/24V DC starting system comprising of starter motors : voltage regulator and arrangement for initial excitation complete with suitable Nos. of batteries (suitable capacity) as required as per specifications.Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications.Synchronous alternator rated at below mentioned capacity, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & a 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self- excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class-F/H insulation. |
| 666 | 125 KVA - Hostel Block |
| 667 | 250 KVA - Wellness Centre |
| 668 | 320 KVA - Water Park |
| 669 | 500 KVA - Water Park |
| 670 | Supply and fixing Exhuast piping for DG Set's with following sizes of MS pipes conforming to IS -3589 with bends, tees, reducers, fleixble connection etc. providing & fixing suitable self supporting arrangement duly painted at suitable intervals, supplying & fixing of 150 mm thick Rock wool matrix (3x50 mm. thick) insulation of density 150Kg per cubic metre on all sides of Exhaust pipe with chicken mesh wrapping and 22 SWG aluminium sheet cladding , suitable for outdoor installation, guide support, expansion joint, SS bellows complete as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 671 | 100 mm dia MS pipe (5.20 mm thick). |
| 672 | 125 mm dia MS pipe (5.20 mm thick). |
| 673 | 150 mm dia MS pipe (5.20 mm thick) |
| 674 | Fabrication, supply & erection of MS support for fixing of exhaust piping and MS structure including Angle / chanels / flats / beam as per approved drawings for supporting of DG exhaust stack from ground. floor level and above terrace level as required. Complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 675 | E A R T H I N GGI Plate Earthing For Utility & Pump Rooms Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 676 | Copper Plate Earthing For Neutral and Body Earthing of DG & TransformerEarthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 677 | Supplying and laying Extra salt and charcoal for earthing pits as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 678 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 679 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 680 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 681 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc.as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 682 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 683 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 684 | LIGHTNING CONDUCTORADVANCED LIGHTENING PROTECTION SYSTEM (ALPS)Supply, Installation, testing & commissioning of CPRI tested Early Streamer Emission Lightning Conductor (ESELC) air terminal having Δt (gain in triggering time) of minimum 40 ųs and radius of protection 75 meters in Level 1 protection zone along with 5 mtrs mast (3mtrs.GI +2mtrs FRP) with base plate, guying kit and other accessories for installation of ESELC on the top of the building to protection from direct lightning strike. Device Confirming to NFC 17 – 102 standards as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. (Make - ABB or equivalent) |
| 685 | Supplying and fixing of 2 digit electromechanical Lightning Event Counter in IP 65 enclosure without external power source complete with interconnection in series with down conductor path mounted at the height 2 meters from ground level. The counter should give the number of strikes intercepted by the lightning arrester etcas required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 686 | Supply and fixing of 70 Sqmm single core copper conductor PVC sheathed unarmoured cable complete with connection testing etc as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 687 | Supplying and fixing Test joint mounted at the height of 1.5 meters from ground level. The test joint shall be provided in a link plastic box, fitted with 25mmx5mm thick 125mm long Copper strip, with 2Nos. epoxy insulators, 4Nos Brass bolts, check nuts & spring washers, etc. complete as required, in order to disconnect the earth termination system for measurement of earth results etc complete as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 688 | LAN & EPABX System- Wellness centreSupplying, drawing, connecting and testing of 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed telephone wire in existing conduit/wire way duct etc.as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. of following sizesMake- Delton,Finolex,Network or equivalent2 Pair (4 core) |
| 689 | Supply, Laying Connectig ad testing of multi core (10 Pair) Telwphone cable of conductor size 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed jelly Filled as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make- Delton,Finolex,Network or equivalent |
| 690 | Supply,Laying connecting and Testing of 10 Pair cross Jumper type Telephone tag block krone make in surface /recess in wall required size of M.S box with hinged lockable dully stove enamel painted as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make-Krone/ or equivalent |
| 691 | Supply,Laying connecting and Testing of 10 Pair telephone tag block krone make in surface /recess in wall.Requried size of M.S box with hinged lockable duly stove enamel painted as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make-Krone or equivalent |
| 692 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. 1 or 2 Module (75mmX75mm) |
| 693 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etcas required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Polycab, Havells, L&T or Equivalent |
| 694 | Telephone socket outlet |
| 695 | RJ-45 Data Socket outlet Make:- Molex, Belden, Panduit, Systimax |
| 696 | Supply,Installation Testing and Commissionning of Hybrid Server based PaBX with 40 analog Extension ,4 digital Extension 04 CO with CLI Facilities system as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. .Make-Karel,Alcatel/Siemens/Matrix or equivalent |
| 697 | Supply and Installation of CLI based push button telephone set.Make- Singhtel,Panasonic,Alcatel, Beetel as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. |
| 698 | Propriatary Full duplex HF digital phone set with 12 double function programmable keys,4 line display ,call waiting ,3 way confrence,call transfer,User to user signaling as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make-Karel,Alcatel,Siemens, Matrix or equivalent |
| 699 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Molex, Belden, Panduit, Systimax or equivalent |
| 700 | Supply Installation testing and commissioning of 24 port L2 Managed switch having port density 24 No.of 10/100/1000Mbps/4 1 G SFP Ports as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make- Cisco/Juniper/ATI/Quantum or equivalent |
| 701 | SITC of UTP CAT 6 UTP Patch Cord 0.5 Mtras required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Molex, Belden, Panduit, Systimax or equivalent |
| 702 | SITC of UTP CAT 6 UTP Patch Cord 2 Mtras required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Molex, Belden, Panduit, Systimax or equivalent |
| 703 | Supply and Fixing of 12 U wall mounting Networking Rack as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make- Dynamic/Comrack/Netrack/Dlink or equivalent |
| 704 | Supply Punching and Fixing of 24 ports Jack Panel, unloaded as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Molex, Belden, Panduit, Systimaxor equivalent |
| 705 | Supply,Laying of UNI Tube Single Mode 6 F Armored Fiber Optic Cable as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Molex, Belden, Panduit, Systimax or equivalent |
| 706 | Supply and Fixing of 12 Core Splicing Enclosure as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Standard Make or equivalent |
| 707 | Supply and Splicing of LC Pigtails, SM, 1m as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Molex, Belden, Panduit, Systimax or equivalent |
| 708 | Supply and Fixing of 48/96 port LIU box Loaded.with 12 LC Ports as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Molex, Belden, Panduit, Systimax or equivalent |
| 709 | Supply and Fixing of Single Mode Patch cord LC to LC 1mtr as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make:- Molex, Belden, Panduit, Systimax or equivalent |
| 710 | Supply and Installation of Single Mode LC 1G SFP LR Module for switch as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make- Cisco/Juniper/ATI/Quantum or equivalent |
| 711 | Supply and Installation of 1G copper SFP Module For Switch as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make- Cisco/Juniper/ATI/Quantum or equivalent |
| 712 | Supply, Installation, Testing & Commissioning of the Microservices based WLAN Architecture. The indoor AP should have radios to support 2.4Ghz and 5 Ghz band in a 4X4:4 Mu-MIMO configuration with support for 802.11 a/b/g/n/ac. The AP should have internal Omni Antennas and should support vBLE and RF optimization. It should also support way finding and asset tracking via bluetooth.Should support Artificial Intelligence platform, WIPS/WIDS to detct Rogue APs and the facility to terminate connevction to the Rogue APs.Plenum rated and support for UL 60950-1 CAN/CSAC22.2 No. 60950-1, FCC Part 15.247, 15.407, 15.107, and 15.109 RSS247 ICES003 as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Approved Make :Cisco/ Impulse / Juniper / Extreme/ Nexxus/Arista/Netgear or equivalent |
| 713 | Supply, Installation, Testing & Commissioning of The controller should be AI driven on premise or cloud based controller. The controller should be based on Micro Services based Architecture. The solution should support 802.11ac primarily but, should be becakward comaptible to 802.11 a/b/g/n as well and also should have provision to take care of 802.11ax based APs. It should also support way finding and asset tracking via bluetooth.Should support Artificial Intelligence platform, WIPS/WIDS to detct Rogue APs and the facility to terminate connevction to the Rogue APs. The platform should support Guest portal as well and shoul dbe scalable to 100 APs in future. Must be able to provision bulk deployment via templates. Should also have feature to limit the bandwidth based on client, SSID and application. Should have provision to create WxLAN policies or ACLs to create rules as per organizational requirement. Should have provision to extent API to integrate with other systems as well as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Approved Make :Cisco/ Impulse / Juniper / Extreme/ Nexxus/Arista/Netgear or equivalent |
| 714 | Supply and Fixing of 25 mm Sizes of Medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good thw same in case of recessed conduit as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. Make-Polycab/AKG or equivalent |
| 715 | PA SYSTEM FOR PAGING - Water ParkSupply, installation, testing & commissioning of rack mounting switcher / control unit and Voice Alarm Call Station having gooseneck condenser microphone with 12 zone Selection Keys and an All-Call-Key, PTT Switch, selectable gain, speech filter and limiter for improved intelligibility, LED indication for zone selection, fault and emergency, controller etc complete with all accessories as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. . Make Ahuja Model No. - APM-201RM+APM-202CU or equivalent |
| 716 | DIGITAL AUDIO SYSTEM - Water ParkProviding, installation, testing and commissioning of the below mentioned as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager |
| 717 | Wall Speaker (Rating 400 W)Frequency Range (-10dB) 55 Hz – 20 kHzFrequency Response (±3 dB) 80 Hz – 20 kHzCoverage Pattern 90° x 90°Directivity Factor (Q) 10.1 (1 k – 16 kHz)Directivity Index (DI) 9.5 dB (1k – 16 kHz)System Power Rating 400 W (1600 W peak), 2 hrs. 250 W (1000 W peak), 100 hrsSensitivity (2.83V @ 1m) 96 dB (Ave. 80 Hz – 20 kHz)Maximum SPL (1m) Direct 8Ω: 122 dB (peaks of 128 dB) 200 W Tap: 119 dBCrossover Network 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF |
| 718 | Nominal Impedance 8 ohmsTransformer Taps 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50WLF Driver Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil.HF Driver 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.HF Driver Protection Minimum audibility SonicGuard™ HF overload protectionEnclosure ABS with Glass enclosure, heavily bracedAttachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing.Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16\\") and 9.0 mm (0.36\\")Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).Dimensions 402 x 402 x 445mm (15.8 x 15.8 x 17.5 in), cabinet 470 mm (18.5 in) depth with gland nut 542 mm (21.4 in) including bracket extending to backColors Available in gray (similar to Pantone 420C) and black (-BK)Net Weight (each) 15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with u-bracketShipping Weight 23.4 kg (51.5 lbs)Included Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.Crossover Modes PassiveNominal LF Driver Impedance 8 ohms (Make :-JBL/ Martin Audio / Meyer sound or equivalent as approved by engineer / Consultant) |
| 719 | Wall Speaker (Rating 250 W)Frequency Range (-10dB) 80 Hz – 20 kHzFrequency Response (±3 dB) 100 Hz – 20 kHzCoverage Pattern 120° x 120°Directivity Factor (Q) 8.1 (1 k – 16 kHz)Directivity Index (DI) 8.4 dB (1 k – 16 kHz)System Power Rating 250 W 2 hrs. 200 W 100 hrsSensitivity (2.83V @ 1m) 94 dB (Ave. 100 Hz – 20 kHz)Maximum SPL (1m) Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dBCrossover Network 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LFNominal Impedance 8 ohms |
| 720 | Transformer Taps 70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50WLF Driver Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.HF Driver 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.HF Driver Protection Minimum audibility SonicGuard™ HF overload protectionEnclosure ABS with Glass enclosure, heavily bracedAttachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16\\") and 9.0 mm (0.36\\")Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).Dimensions 300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to backColors Available in gray (similar to Pantone 420C) and black (-BK)Net Weight (each) 9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracketShipping Weight 14.1 kg (31.0 lb)Included Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.Crossover Modes PassiveNominal LF Driver Impedance 8 ohms (Make :-JBL/ Martin Audio / Meyer sound or equivalent as approved by engineer / Consultant) |
| 721 | LF Extender - SubwooferProviding, installation, testing and commissioning of the below mentioned as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager Frequency Range (-10dB) 45 Hz – 2.2 kHzFrequency Response (±3 dB) 70 Hz – 1.2 kHzSystem Power Rating 500 W (2000 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs.Sensitivity (2.83V @ 1m) 94 dB (Ave. 80 Hz – 300 Hz)Maximum SPL (1m) Direct 8Ω: 121 dB (peaks of 127 dB) 300 W Tap: 119 dB (peaks of 125 dB)Nominal Impedance 8 ohms (in Direct mode)Transformer Taps 70V: 300W, 150W, 75W, 38W 100V: 300W, 150W, 75WLF Driver 380 mm (15 in), Kevlar-reinforced cone, with weather treatment, 75 mm (3 in) voice coil, long throw.Enclosure ABS with Glass enclosure, heavily bracedAttachment Two M10 (course-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside openlug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16\\") and 9.0 mm (0.36\\")Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).Dimensions 486 x 486 x 479 mm (19.1 x 19.1 x 18.8), cabinet 507 mm (19.9 in) depth with gland nut 546 mm (21.5 in) including bracket extending to backIncluded Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extra-thick powder coated, steel.Nominal LF Driver Impedance 8 ohms (in Direct mode)Suspension Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.Net Weight (each) 20.2 kgs. (44.5 lbs.) (Make :-JBL/ Martin Audio / Meyer sound or equivalent as approved by engineer / Consultant) |
| 722 | Wall / Pole Brackets Providing, installation, testing and commissioning of Galvanized U Bracket for al speakers, powder coated with IP 56 Covering as per detailed specification as required complete in all respects including all leads and lifts as per direction of Engineer -in -charge. .(Make :- Crown or equivalent as approved by engineer / Consultant) or equivalent |
| 723 | Digital Signal ProcessorProviding, installation, testing and commissioning of the 12x8 Signal Processor with BLU link (EU) as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager . (Make :- BSS/QSC/BIAMP or equivalent as approved by engineer / Consultant or equivalent ) |
| 724 | Analog Mixing ConsoleProviding, installation, testing and commissioning of the10 mic input Analog Mixing console with FX as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager . (Make :-Soundcraft/YAMAHA/ALLEN AND HEATH or equivalent as approved by engineer / Consultant or equivalent) |
| 725 | Amplifier Providing, installation, testing and commissioning of4 x 1250 watt Amplifier 4 channels 1250 watt @ 8 ohm with CLASS D and DSP inbuilt with Blue link mandatory as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .(Make :-Crown/QSC/MEYER SOUND or equivalent as approved by engineer / Consultant or equivalent) |
| 726 | Speaker cable Providing, installation, testing and commissioning of 1.5 sq mm 16 AWG Speaker cable with anti magnetic and 99.9% bare copper with rubber IP 56 insulation as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager |
| 727 | PUBLIC ADDRESS SYSTEM- Hostel BlockSupplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 728 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 729 | Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 730 | Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 731 | CABLING & WIRINGSupplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 732 | Speaker cable Single pair, 2-core, 1.5 sqmm |
| 733 | Speaker cable Two pair, 2-core, 1.5 sqmm |
| 734 | NETWORKING Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required complete in all respect as per entire satisfaction of Engineer Incharge.3 Module (100mmX75mm) |
| 735 | Supply, Installation, Testing and Commissioning of Cat 6A, Information Outlet, UL Listed, Color Blue/grey/white/other (I/O) for Data, Voice, CCTV & Wi-Fi on the existing modular plate & switch box including connections but excluding modular plate etc. as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 736 | Wi Fi ACCESS POINTSDesigning Supply, Installation, Testing and Commissioning of wifi 6, 802.11ax Dual band 2.4-GHz and 5-GHz wireless access Point, (Backward compatible to 802.11b/g/n/a/ac). Dual band 4x4 (2.4GHz and 5.0GHz)8 streams of data for an aggregate throughput of up to 3.6Gbps. Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID and VLAN1. Orthogonal Frequency Division Multiple Access. Should feature 2.5GbE port.Built in controller with Remote management as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 737 | Indoor |
| 738 | Outdoor |
| 739 | Supply installation Testing and commissioning of Wireless Access Controller High Performance Enterprise-Class Wireless Controller with 50 AP Support on one device and can be stacked in 3+1 to support upto 150AP (One for redundancy) as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 740 | Supply, installation, testing and commissioning of Router/Security Appliance Stateful firewall, 1:1 NAT, DHCP, DMZ, static routing, Identity-based policies Auto VPNTM self-configuring site-to-site VPNClient VPN (IPsec)User and device quarantineVLAN support and DHCP services, Content filtering (Webroot BrightCloud CIPA compliant URL database), Web search filtering (including Google and Bing SafeSearch), Intrusion prevention (SourceFire Snort based), Malware Protection as required complete in all respect as per entire satisfaction of Engineer Incharge. |
| 741 | CCTV SYSTEM - WELLNESS CENTRESupplying, Installation Testing and commissioning of 4MP Dome Network Camera with 1/2.7\\" Progressive scan RGB CMOS or better; with Builtin IR Cut Filter; min illumination 0.19 lux for color at 50IRE, and 0.04 lux for B/W at 50 IRE (IR off); Built in Or External Power efficient, long life 850 nm IR LED with 20 meter range or better; Horizontal FoV 130° or better; Image resolution from 2688x1512 to 320x240, similar or better; Up to 25 FPS at all resolutions with Controllabe Bit Rate/ Bandwidth and Frame Rate on H.264, H.265 and MJPEG streams; H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles; H.265 (MPEG-H Part 2/HEVC) Main Profile MJPEG; option to change the GOP/GOV Length to optimize the bandwidth and storage; Up to 4 streams @ 4MP, 25 Fps, H.264 or better; 16:9 or 9:16 format without change in image quality or change in Image; Option to include or exclude any area of any size/dimension within the scene in order to elimintae false alarm and also optimise the bandwidth and storage requirement; 120dB WDR or better; Support feature to directly record the videos/ images onto Nas without any additional Software/VMS; Support send and received trigger directly from any other camera without interface of VMS; Option to upload the images or video clips (event/manually triggered) via FTP, SFTP, HTTP, HTTPS, network share, and email; Pre- and post-alarm video or image buffering for recording or upload, Notification through email, HTTP, HTTPS, TCP and SNMP trap, MQTT publish; Built in SD card slot with support for microSD, microSDHC, microSDXC with Class 10 speed or better, and Support for SD card encryption (AES-XTS-Plain64 256bit) or better; Image overlay - Date & time, and a customer-specific text, camera name, graphical image etc; Security options like Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, Digest authentication, User access log, Centralized certificate management,brute force delay protection, signed firmware, secure boot, etc.; option/s for easy troubleshooting like 200 logs entries or more of latest connections, access attempts, users connected, changes in the cameras etc .; IP66, NEMA 250 Type 4X, and IK08-rated, PVC Free or better; option to send trigger via HTTP/HTTPS to IoT Devices for active alerts; PoE; Operating temp - -30 °C to +50 °C; humidity 10-100% RH (condensing); MTBF of 100,000 hrs or better (declaration should be available on official OEM website); Certifications - EMC (EN 55024, EN 55032 Class A, EN 55035, EN 61000-6-1,EN 61000-6-2, FCC Part 15 Subpart B Class A, KC KN32 Class A, KC KN35, RCM AS/NZS CISPR 32 Class A, ICES-3(A)/NMB-3(A), VCCI Class A), Environment (IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78, IEC 60068-2-14, IEC 60068-2-6, IEC 60068-2-27, IEC/EN 62262 IK08, IEC/EN 60529 IP66/IP67, NEMA 250 Type 4X), Safety (IEC/EN/UL 60950-22, IEC/EN/UL 62368-1, IEC/EN 62471, IS 13252), Network (NIST SP500-267, IPv6 USGv6) or better; support 3rd party edge based analytics; API shall be available, for integration with 3rd party analytics and applications, in public domain and free of cost; Camera should be NDAA Complaint; Camera should not have Hisilicon Chipset/processor; all the components / parts / assembly / software used in the offered hardware and software, should not be complying to GB28181, GB/T 28181-2011; GB/T28181-2011; GBT 28181-2011; GBT28181-2011 standards. There should be no option to activate or deactivate these standards in the camera web page/Settings; 05 Years OEM Warranty.or as required to have end-to-end solution complete in all respects and to the best statisfaction of engineer in charge. Make - Axis/Mobotix/Avigilon/Arecont Vision or equivalent |
| 742 | Supplying, Installation Testing and commissioning of Quad HD Outdoor Bullet Camera with image Sensor-1/2.7” progressive scan RGB CMOS or better; IR corrected Lens for Day/ Night Operations with auto IR cut-filter; Image resolution of 2304x1728 to 320x240 (4:3) 2688x1512 to 640x360 (16:9) or better; Minimum Illumination for Color - 0.18 lux at 50IRE and 0.04 lux at 50 IRE without IR LED switched on; Built in Or External power efficient IR with 20 meter range, 850nm, long life; Horizontal FOV 130° (16:9 4MP) and 109° (4:3 4MP) or better; WDR 115 dB or better; Image Rotation: 0°, 90°, 180°, 270°, including corridor format; Multiple, individually configurable resolutions with Controllabe Bit Rate/ Bandwidth and Frame Rate for each/every streams in H.264, H.265 and MJPEG; Support automatic dynamic GOP for optimal bitrate utilisation; Support automatic dynamic ROI to reduce bitrate in unprioritized regions; Support for ONVIF® Profile G, ONVIF® Profile M, ONVIF® Profile S, and ONVIF® Profile T, or better; Security features like Password protection, IP address filtering, HTTPSa encryption, IEEE 802.1Xa network access control, Digest authentication, User access log up to 200 entries or more, brute force delay protection, signed firmware, System-on-chip security (TEE), secure boot, encrypted filesystem (AES-XTS-Plain64 256bit) or better, SD card encryption (AES-XTS-Plain64 256bit) or better, signed video, IEEE 802.1X (EAP-TLS, PEAP-MSCHAPv2), IEEE 802.1AE (MACsec PSK/EAP-TLS), IEEE 802.1AR, HTTPS/HSTS, TLS v1.2/v1.3, Network Time Security (NTS), X.509 Certificate PKI, host-based firewall, compliant to cybersecurity standard ETSI EN 303 645, or better; Support triggering Events in case of view tampering, storage disuption/failure, and more; Support to upload images or video clips using FTP, SFTP, HTTP, HTTPS, Network Share, and Email, or more; Provide notifications using Email, HTTP, HTTPS, TCP and SNMP trap or more; Provide pixel counter and level grid; Provide signed OS; PVC free, BFR/CFR free; The Camera to be provided by the bidder should not be complying to GB28181,GB/T28181-2011 standards and There should be no option to activate or deactivate GB/T 28181 standards in the camera web page/Settings; Certifications EMC (CISPR 24, CISPR 35, EN 55032 Class A, EN 55035, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-3(A)/NMB-3(A), KC KN32 Class A, KC KN35, RCM AS/NZS CISPR 32 Class A, VCCI Class A) Safety (IEC/EN/UL 62368-1, CAN/CSA C22.2 No. 62368-1, IEC/EN/UL 60950-22, CAN/CSA-C22.2 No. 60950-22, IEC 62471, IS 13252) Environment (IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK08, NEMA 250 Type 4X, NEMA TS 2 (2.2.7-2.2.9)) Network (NIST SP500-267) or better; Upto 60 FPS at all resolutions with Controllabe Bit Rate/ Bandwidth and Frame Rate. In CBR Priority to be defined for Video quality or frame rate and the bandwidth upper limit shall not exceed the defined limit.;including 5 year OEM Warranty or as required to have end-to-end solution complete in all respects and to the best statisfaction of engineer in charge. Make - Axis/Mobotix/Avigilon/Arecont Vision or equivalent |
| 743 | Supplying, Installation Testing and commissioning of Quad HD Outdoor PTZ Camera with30x Optical Zoom; Image Sensor-1/2.9” progressive scan RGB CMOS or better; IR corrected Lens for Day/ Night Operations with auto IR cut-filter; Image resolution of 2688x1512 to 320x180 (16:9) or better; Minimum Illumination for Color - 0.1 lux at 30IRE and 0.01 lux at 30 IRE without IR LED switched on; Built in power efficient IR with 200 meter range or more (on PoE+), 850nm, long life LEDs; Horizontal FOV 57.1° to 2.1° or better; WDR 120 dB and 50/60 fps or better; 360° endless Pan (0.1° - 350°/s) and Tilt 0-90° (0.1° - 350°/s) 256 preset positions, nadir flip, on-screen directional indicator, set new pan 0°, focus recall, spot focus, or better; Multiple, individually configurable resolutions with Controllabe Bit Rate/ Bandwidth and Frame Rate for each/every streams in H.264, H.265 and MJPEG; Support automatic dynamic GOP for optimal bitrate utilisation; Support for ONVIF® Profile G, ONVIF® Profile M, ONVIF® Profile S, and ONVIF® Profile T, or better; Support 20 individual polygon and mosaic privacy masks or better; Security features like Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X (EAP-TLS) network access control, Digest authentication, User access log up to 200 entries,centralized certificate management, brute force delay protection, signed firmware, secure boot, encrypted filesystem (AES-XTS-Plain64 256bit) or better, SD card encryption (AES-XTS-Plain64 256bit) or better, signed video; MQTT:subscribe event; Certificatins/compliances in EMC (CISPR 35, CISPR 32 Class A, EN 55032 Class A, EN 55035, EN 50121-4, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A) Safety (IEC/EN/UL 62368-1 ed. 3, CAN/CSA C22.2 No. 62368-1 ed. 3, IEC 62471 risk group 2, IS 13252) Environment (IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78, IEC/EN 60529 IP66, IEC/EN 62262 IK10, NEMA 250 Type 4X, NEMA TS 2 (2.2.7-2.2.9), ISO 21207 (Method B))Network (NIST SP500-267) Cybersecurity (ETSI EN 303 645) or better; Network security based on IEEE 802.1X (EAP-TLS, PEAP-MSCHAPv2), IEEE 802.1AE (MACsec PSK/EAP-TLS), IEEE 802.1AR, HTTPS/HSTS, TLS v1.2/v1.3, Network Time Security (NTS), X.509 Certificate PKI, host-based firewall, or better; Operational environment of -30 °C to 50 °C, and Humidity 10–100% RH (condensing) or better; PVC Free; Support Network protocols Network protocols IPv6 USGv6, ICMPv6, HTTPS, HTTP/2, TLS, QoS Layer 3 DiffServ, SFTP, CIFS/SMB, SMTP, mDNS (Bonjour), UPnP®, SNMP v1/v2c/v3 (MIB-II), DNSv6, RTCP, RTP, SRTP/RTSPS, IGMPv1/v2/v3, DHCPv6, SSH, NTCIP, LLDP, CDP, MQTT v3.1.1, Secure syslog (RFC 3164/5424, UDP/TCP/TLS), Link-Local address (ZeroConf); including 5 year OEM Warranty or as required to have end-to-end solution complete in all respects and to the best statisfaction of engineer in charge. Make - Axis/Avigilon/Arecont Vision or equivalent |
| 744 | Supplying, Installation Testing and commissioning of 32 Channel secure VMS/NVR with 4 SATA Slots; 40TB raw Storage or more; support 10TB HDD per port or better; Support RAID 0,1,5,10 or better; Support 256Mbps incoming and 256Mbps outgoing bandwidth or better; Support 9 simultaneous logins or better; Support configuration, playback & live streaming of cameras added to other NVR from the main NVR without the need of any server/workstation; Support integrating with IP cameras of any brand which supports ONVIF 2.0 & above or ONVIF S profile; Support different number of Retention days for individual cameras; show the estimated number of storage days based on average usage; Support Digital Zoom during live viewing; provide configuration backup; Support video pop-up on desktop and local client as well; 3 user access levels - admin, operator, and Viewer, or better; Support 10K event logs or better; Support Exporting Files in Native and AVI File Format to FTP and USB; Support IP Address Filtering to Enhance Security; Mobile Client should support up to 50 NVRs on single device or better; Support network protocols - TCP/IP, DHCP, PPPOE, DNS, DynDNS, FTP, SMTP, NTP, RTP/RTSP, CIFS/NFS or better; FCC (FCC Part 15 Subpart B Class A), ROHS, BIS, CE,EN/IEC certified or better; 02 year OEM warranty or better; or as required to have end-to-end solution complete in all respects and to the best statisfaction of engineer in charge.. Make - Axis/Avigilon/Arecont Vision/NUUO/QNAP/GVD or equivalent |
| 745 | Supplying and fixing of 25mm PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit; as required to have complete solution in all respects and to best staisfaction of engineer in charge. Make:- DPlast or equivalent |
| 746 | Providing and drawing LAN cable having TIA/EIA 568-D.2 CAT6 UTP, CM/CMR rated LS0H cable with support for up to 1000Base-T/TX; UL listed & ETL verified; 23 AWG Solid bare copper; Contact resistence 10 ohm max.; Dielectric strength of 1000V RMS or better; in existing PVC conduit/ casing and capping as required to have complete solution in all respects and to best staisfaction of engineer in charge. Make:- Belden/Molex/Systimax or equivalent |
| 747 | Supplying, Crimping, Testing and commissioning of Rj-45 jack conforming to Cat6 standards; as required to have complete solution in all respects and to best statisfaction of engineer in charge. Make:- Dlink/Molex/Tplink or equivalent |
| 748 | Supplying, Installation Testing and commissioning of Access Switch with 8 X 10/100/1000 Mbps PoE Ports and 2 x 10G SFP+ Ports; 140W PoE Power budget or better; 1x1G copper SFP modules included; 03 years warranty or better; or as required to have complete solution in all respects and to best staisfaction of engineer in charge. Make:- Cisco/Juniper/Quantum/ATI or equivalent |
| 749 | Supplying, Installation Testing and commissioning of Access Switch with 16 X 10/100/1000 Mbps PoE Ports and 2 x 10G SFP+ Ports; 240W PoE Power budget or better; 1x1G copper SFP modules included; 03 years warranty or better; or as required to have complete solution in all respects and to best staisfaction of engineer in charge. Make:- Cisco/Juniper/Quantum/ATI or equivalent |
| 750 | Supplying, Installation Testing and commissioning of 24 Port Layer 3 Core Switch with 16 X 10/100/1000 Mbps and 8 x 10/100/1000 Mbps combo ports Plus 4 x 10G SFP+ uplink Ports; 03 years warranty or better; or as required to have complete solution in all respects and to best staisfaction of engineer in charge. Make:- Cisco/Juniper/Quantum/ATI or equivalent |
| 751 | Providing and fixing of 4U Wall Mount Rack with required accessories, or as required to have complete solution in all respects and to best statisfaction of engineer in charge. Make:- Comrack/Netrack/Dlink/President or equivalent |
| 752 | Providing and fixing of 9U Wall Mount Rack with required accessories, or as required to have complete solution in all respects and to best statisfaction of engineer in charge. Make:- Comrack/Netrack/Dlink/President or equivalent |
| 753 | Supplying, Installation Testing and commissioning of Remote Client Desktop (HW + SW); Core i7 latest generation, 16GB RAM, 512GB SSD, wireless keyboard and mouse; 2GB Graphic card extra; 03 years warranty or better; or as required to have complete solution in all respects and to best staisfaction of engineer in charge. Make:- HP/Dell/Lenovo or equivalent |
| 754 | Supplying, Installation Testing and commissioning of UHD 75\\" LED professional screen; 03 years warranty or better; or as required to have complete solution in all respects and to best staisfaction of engineer in charge. Make:- LG/Samsung/Sony or equivalent |
| 755 | Supplying, Installation Testing and commissioning of 2 KVA Online UPS with internal batteries or as required to have complete solution in all respects and to best statisfaction of engineer in charge. Make:- APC/Microtek/Numeric/Luminous or equivalent |
| 756 | CAMERAS- HOSTEL & WATER PARKPTZ CAMERASupply, Installation, Testing & Commissioning of 5 MP IR IP H.265 High Speed PTZ dome camera with 30X Optical zoom, Accurate & fast focusing, WDR, Micro SD card slot, Smart analytics and 200M IR support,Intrusion detection, Cross line detection,Auto Tracking,Compatibility ONVIF (Profile S,G), API.as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 757 | DOME CAMERASupply, Installation, Testing and Commissioning of 5 MP Dome Camera (with protective enclosure), ONVIF profile S & G, UL, CE, FCC Certified, 1/2.8\\" CMOS sensor, 3.6 mm fixed focal, triple stream, Min Illumination: 0.01 Lux @ (F1.2, AGC ON), 0.028 Lux @(F2.0, AGC ON), 0 Lux with IR, Shutter Speed : 1/5 ̴ 1/100, 000 s, Edge analytics: line crossing, perimeter intrusion, stationary object, Video Compression: H.265, H.264, frame rate 30 fps @ 3MP, Edge analytics: line crossing, perimeter intrusion, Face detection, cross counting, stationary object, In built IR LED, IR distance upto 30 mtrs, IP 66, POE.as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 758 | BULLET CAMERASupply, Installation, Testing and Commissioning of IP Network TDN Low-Light 5 IR Rugged Outdoor Bullet Camera, 1/2.8\\" CMOS, 2MP @ 25/30fps, Video coNS/MRession H.265, H.264 High Profile and MJPEG, Min. Pixels 1920x1080p, Automatic Varifocal lens 2.8 -12 mm DC Iris with motorized focus & zoom, Min. Illumination required 0.07 lux (color), 0.008 (mono), 0 Lux IR ON , Min WDR as per IEC-62676-PART 5 - 85dB, Defog, 850nm intensity adjustable IR LEDs Smart IR with upto 50m IR distance, MInimum 512GB SD card support, 60 sec pre- alarm recording,Camera should have fully configurable quad streaming , Alarm I/O: 1 In/ 1out, Audio I/O: 1 In/ 1outPoE, Analog Video Output, IP 67, IK 10 , Camera security Password protection, IP address filtering, HTTPSa encryption, IEEE 802 as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 759 | NVRSupply, Installation, Testing and Commissioning of 64-CH High Performance H.265 NVR, Network Video Input: 64-CH, Video Compression: H.265+/H.265(HEVC)/H.264+/H.264, Disk Array Type: RAID. SATA: 8xSATA HDD, 1xeSATA. Capacity: 10TB capacity. Bandwidth Requirement: 320Mbps. Output: 2-CH HDMI Output. 2-CH VGA Output. Dual Stream Support. Recording Resolution:12MP/8MP/6MP/ 5MP/4MP/3MP/1080P/ UXGA/720P/D1/VGA/CIF/QCIF. Network Interface 2x Gigabit Ethernet Ports. USB Interface. Audio Input/Output. Alarm Input/output. Video Analysis capabilities. Built in Transcoding features. |
| 760 | WORK STATTION & DISPLAYSupply, Installation, Testing & Commissioning of 43\\" Flat Screen HD led (24X7) with Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor stand complete with making connections etc as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 761 | Supply, Installation, Testing and Commisioning of Client workstation Processor intel i7, 13th Gen, 4ghz or higher, OS geniune Window 11, Color Monitor 22\\", RAM 8GB DDR3 SDRAM, MEMORY 1TB HDD, 2GB GRAPHIC CARD as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 762 | SWITCHESSupply, Installation, Testing and Commissioning of 24 Gigabit ports core Switch L3 routing capabilities. 24-port 1000BASE-T RJ45), 2-port 10GBASE-T (RJ45), 2-port 10GBASE-X (SFP+). 128 Gbps Switching capacity Full IPv6 support with dual stack (|Pv4 and IPv6), multicasting, and QoS, static routing and dynamic routing. Should have Network virtualization and segmentation. Should support network monitoring. Full L3 feature set and non stop forwarding (NSF) stacking as required to have complete solution in all respects and to best statisfaction of engineer in charge. Engineer Incharge / Project Manager |
| 763 | Supply installation Testing and commissioning of L2 Switch 10/100/1000 POE+ Switch of following ports with 2 dedicated 10G SFP+ ports + 2 dedicated 1G SFP ports i/c Data Patch Panel of following way Un Loaded as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 764 | 48 port |
| 765 | 24 port |
| 766 | 16 port |
| 767 | 8 port |
| 768 | Providing, installation, testing and commissioning of 10G Multi Mode Modules complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager . |
| 769 | Supply ,Installation ,Testing and Comissioning of Cat6 UTP 24-26 AWG Patch Cord - 1mtr with cross separator,Manufactured from starnded wires for flex-life,Minimum length 1m, LSZH (Low Smoke Zero Halogen) standards like IEC 60332-1 as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 770 | Supply ,Installation ,Testing and Comissioning of Cat6 UTP 24-26 AWG Patch Cord - 2mtr with cross separator,Manufactured from starnded wires for flex-life,Minimum length 1m, LSZH (Low Smoke Zero Halogen) standards like IEC 60332-1 as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 771 | Supply and erection of 19 U wall mount rack, Tinted Toughened Glass Door, 2 pairs 19” of Mounting Rail(front & back) with “U” marking screen printed,Side panel High quality fan of High Cool brand,High quality PDU as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 772 | Supply, installation, testing and commissioning of 42U Equipment Rack, 800 x 1000mm. Lockable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units & equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs to facilitate front-to-rear cabling as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 773 | IP PBX WITH SIP PHONESSupplying, Installation, Testing & Commissioning of Digital IP PBX System having 6 Analog CO Lines, 2 Digital extensions, 16 Analog extensions with CLI DSP Card with VoIP Activation Key, 96 SIP Extensions, 2 Hours Simplified Voice Mail, Day, Night Message with COS Control, Flexible Numbering Plan for 1 digit - 5 digit numbering, 1 Sot to expand upto 128 IP Extensions . Provision to add additional Cabinets and CPU and Upgrade to 130 Analog extensions and 128 IP Phones as required to have complete solution in all respects and to best statisfaction of engineer in charge.: ISDN PRI Line Card |
| 774 | Supply, installation, testing and commissioning of IP SIP Control console for receiption digital phone set PoE Based with display screen conferencing, contacts, call history records with 6 Line Display, 24 DSS Keys , Sp-phone, etc as required to have complete solution in all respects and to best statisfaction of engineer in charge.- For Reception |
| 775 | Supply, installation, testing and commissioning of IP SIP Based basic digital phone set PoE Based with display screen conferencing, contacts, call history records etc as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 776 | CABLING FOR ABOVE SYSTEMSupplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required to have complete solution in all respects and to best statisfaction of engineer in charge.25 mm |
| 777 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 778 | 1 run of cable |
| 779 | 2 run of cable |
| 780 | UPS SYSTEMSITC of 3Ph- 3Ph true Online UPS System in standalone configuration with advance DSP based technology’ Double conversion IGBT Rectifier and IGBT based inverter UPS system with inbuilt/External Isolation transformer with cabinet and SMF battery backup using 12V batteries including battery protection M.S Rack suitable dimension, well air ventilation to ensure the battery optimum life cycle, proper rating cable for interlinks cable and D.C cable up to 10 mtrs from UPS to batteries including labour charges for installation testing and commission and carrying charges with following Special Features.Static Variation +/-1% & Dynamic variation +/-3% Output frequency: 50Hz +/-0.1% output Power factor: 0.9 waveform: Pure sine wave, Min Overall efficiency 94%, Current Harmonics < 3%, Overload: 110% for 60minutes, 125% for 10 minutes, 150% for 1 minutes. Static by pass: 100% rated static switches with fuse protection overload on bypass: 100% for 10 ms. Protections: input & Output over / under voltage single phasing, DC - High / under voltage, Battery charging over current, output overload / Short Circuit / Over temp. UPS auto on mains recovery protections. Input & Output over / under voltage, single phasing, DC – High / under voltage, battery charging over current output overload / short circuit / over temp. UPS auto ON mains recovery switchgear: MCB / MCCB for input battery, output & manual bypass switch operating temp. 0 to 40Deg C, IP 20enclosure,RH max 95% forced air cooling, max sound less then 60db, communication: Rs. 232, Rs. 485, dual input Kit, monitoring software: UPS monitoring software on windows XP platform, Certification: ISO 9001:2015 ISO 14001: 2015, ISO 18001 RoHS & OHSAS 18001, CE Certification: IEC/EN 62040-1-1, IEC/EN50091-1, IEC/EN 60950 (safety) IEC/ EN 50091-2, IEC/EN 62040-2 (EMC Emission), IEC/EN 62040-3 (performance & Design) IEC/EN 61000-4 (EMC Emmunity) & IEC/EN 60146.UPS Make – DELTA / POWER ONE / Numeric / APC / Vertiv and Battery make:- Exide Power Safe/ Amararaja Quanta Note10 KVA 12V SMF Batteries for 30 minutes backup |
| 781 | EXTERNAL/ LANDSACPE & FAÇADE LIGHTINGSupply installation testing commissioning of IP-66, Street Light luminares 60 W made up of Aluminium die cast powder coating and thoughned glass optical compartment shall be covered with heat resistant having system lumen >6000 with luminaire efficacy min 120 LPW , CRI >80 ,UGR<19 CCT 4000K/5000K PF 0.95 and THD<5% as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 782 | Supply installation testing commissioning of IP-66, Street Light luminares made up of made of aluminum housing duly powder coated / PU painted with Poly carbonate Clear /Frosted diffuser 40 w Rating with luminaire efficacy 120 LPW , CRI >80 ,UGR<19 CCT 4000K/5000K PF 0.95 and THD<5% as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 783 | Supply installation testing commissioning of IP-66, Bollard light luminare made up of Aluminium die cast powder coating and thoughned glass optical compartment shall be covered with heat resistant having system lumen > 1000 with luminaire efficacy 100 LPW , CRI >80 ,UGR<19 CCT 4000K/5000K PF 0.95 and THD<5% as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 784 | Supplying,installation,testing and commissioning of 4 meter heigh galvanized pole (bolt fixing type) Ornamental Pole with base plate of welded at bottom of pole complete with suitable Nos 20 mm dia 600 mm long foundation bolts weathproof electrical junction box having terminal block, 32A 4P MCB in incomer & 16A DP MCB in outgoing for Pole Light ON/ OFF etc mounted on bakelite sheet for looping in /looping out of cables, with flush door having locking arrangement, earthing arrangement (at atleast 0.5 m height) and mounted on RCC foundation of size 500 mm x 500 mm x 1200 mm in ground and 300 mm above ground level with foundation bolt duly embeded before casting and supply and embedding of suitable size HDPE pipe sleeve for cable entry. complete including erection of Pole as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 785 | Supplying,installation,testing and commissioning of 8 meter heigh galvanized pole (bolt fixing type) Ornamental Pole and 1000mm long Single arm bracket of approved design and shape made up of MS metal with hot dip galvanised suitable for pole top of 70mm diawith base plate of welded at bottom of pole complete with suitable Nos 20 mm dia 600 mm long foundation bolts weathproof electrical junction box having terminal block, 32A 4P MCB in incomer & 16A DP MCB in outgoing for Pole Light ON/ OFF etc mounted on bakelite sheet for looping in /looping out of cables, with flush door having locking arrangement, earthing arrangement (at atleast 0.5 m height) and mounted on RCC foundation of size 500 mm x 500 mm x 1200 mm in ground and 300 mm above ground level with foundation bolt duly embeded before casting and supply and embedding of suitable size HDPE pipe sleeve for cable entry. complete including erection of Pole as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 786 | Providing and fixing of LED 20 Watt Post top (IP65) fixture made of Pure polyester UV resistant powder coated Die cast Alum. housing with Polycarbonate clear diffuser for uniform illumination as required to have complete solution in all respects and to best statisfaction of engineer in charge.LED Post top Luminaire 20 watts. |
| 787 | Providing and fixing of LED 40 Watt Solar Post top (IP65) fixture built in solar Panel LED Light and Lithium battery with MPPT based charge controller for max. power extraction and inbuilt battery management systems and BIS certified batteries also over charge protction,Deep discharge protection,batterry reverse polarity protection,load short, open circuit protection and surge protection for hybrid models as required to have complete solution in all respects and to best statisfaction of engineer in charge.LED 40 Watt Solar Post topMakes- Panasonic(Model No. PB040W11MLF2404.)/Bajaj/Wipro or eqivalent |
| 788 | Supply, Installation, testing and commissioning of SMC Junction Boxes,100% weatherproof ,Maintenance-free Pole mounted bollard lighting for 3 phase/4 core based lighting system including copper terminal blocks for incoming and outgoing cables (size up to 4 C x 16 Sqmm) and a 6~32 amps SP MCB, mounting as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 789 | Supplying & drawing 3x2.5sq.mm size FR PVC insulated copper conductor single core cable in the existing pipe as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 790 | Supplying of following size XLPE insulated, PVC sheathed Aluminium conductor cable for rated voltage of 1100 volts grade conforming to IS :7098 (part-1)/88 with amendment no. 1 armored with galvanized steel strip (ISI mark) as required to have complete solution in all respects and to best statisfaction of engineer in charge.4×16 sq.mm.(for compound lighting) |
| 791 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 792 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 793 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 794 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 795 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 796 | 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 797 | Supplying and laying 6 SWG G.I. wire along with cable below ground level for conductor earth electrode, including connection/ termination with GI thimble etc as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 798 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required to have complete solution in all respects and to best statisfaction of engineer in charge.4 X 16 sq. mm (25mm) |
| 799 | Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar tapered (hut type) made out of 2mm thick CRCA sheet having separate cable and bus bar alley double door arrangement with two leaf door on front side and single door with double leaf on rear side with locking arrangement, having 100 amp TPN Aluminum bus bar of full length with base frame made out of 50x50x6mm thick angle iron having 300 mm legs duly erection in ground with construction of cement concrete complete with connection and interconnection with copper conductor PVC insulated cables / insulated copper conductor strip of appropriate size and terminals blocks (on outgoing) including supplying and fixing following switch gears & accessories there in powder coating, labeling, earthing etc. complete as required . a) 100Amps, 415V, 20 KA, TPN MCCB with operating handle (Incomer) = 1 Nob) 100 Amps. 415V, 3 phase AC, TP power contactor = 1 No. c) 63 A 4 Pole MCB complete with interconnections as required. - 10 nosd) Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site as required to have complete solution in all respects and to best statisfaction of engineer in charge. 3 output (1output per phase) and suitable for three phase supply.6 nos 4 pole 32 amp Isolator |
| 800 | HVAC VRV SYSTEMOUTDOOR UNITSupply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating with wired remote,having all hermetically sealed inverter type Scroll / DC Twin rotary Compressor(s), minimum two compressors modules, microprocessor based Controller,topdischarge type condensing unit(s), with R410A Refrigerant, vibration isolators,with suitable foundation etc.complete as required.The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping.The unit shall be suitable to work on400V+/-10%, 3Phase,50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required.The Outdoor Units shall be factory treated using Anti-corrosive Hydrophilic Coating. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.as required to have complete solution in all respects and to best statisfaction of engineer in charge.Wellness Centre14 HP TO 22 HP Total 200 HPHostel Area12 HP- 2 nos18 HP -2 nosTotal 60 HP |
| 801 | Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 802 | 2.0 TR |
| 803 | 2.4 TR |
| 804 | 3.2 TR |
| 805 | 3.6 TR |
| 806 | 4.0 TR |
| 807 | INDOOR UNIT-HIGH WALL TYPESupply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 808 | 1.5 HP |
| 809 | 2.5 HP |
| 810 | INDOOR UNIT-DUCTABLE TYPESupply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 811 | 3.0 HP (MINIMUM CFM 990 ) |
| 812 | 4.0 HP (MINIMUM CFM 1180 ) |
| 813 | 5.0 HP (MINIMUM CFM 1590 ) |
| 814 | 10.0 HP (MINIMUM CFM 3300 ) |
| 815 | REMOTE CONTROLSupply, installation, testing & commissioning of Touch Screen Type of LCD Screen Based Corded Remote Control for Duct Type IDU . This remote should have following operational mode display - Cooling / Heating /Dry Mode / Fan Mode & Auto Mode, air flow changing . The temperature setting should be varied on a interval of 0.5 degree C, also should have functions like daily timer , weekly timer , operation lock & main sub control . suitable for above indoor units to operate.The remote controller shall be suitable for wall mounting with bracket as required to have complete solution in all respects and to best statisfaction of engineer in charge.Wired Remote Controller |
| 816 | TRANSMISSION & CONTROL WIRINGProviding & fixing control cum transmission wiring in medium duty PVC Conduit between indoor and outdoor units as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 817 | 2C x 1.5 Sqmm Cu Sheilded Cable |
| 818 | Corded Remote Wire |
| 819 | Central Controller for Indoor & Outdoor UnitsSupply, installation, testing & commissioning of IOT Based Central Controller capable of controlling of all IDUs, ODUs complete with necessary hardware, Software,accessories etc. IOT Based VRF Management Software which can be controlled from anywhere in the world & can be accessable through Smartphone , Tablet or PC . It should be connected with 16 Outdoor Unit + 80 Indoor Unit together with 1 system . The system should not have any yearly future licencing fees & the cost quoted should be for lifetime usage to perform the following functions Centralized control Control your entire VRF system or selected zones with one touch.Adjust temperature, fan speed and modes Simplified troubleshooting A clear error history, concise error description and follow-up. Smartphone alerts In the event of a critical malfunction.flexible user management Add users and custom access restrictions,Intuitive scheduling Plan operations ahead based on business hours.Individual controller lock Prevent inappropriate usage from occupants as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 820 | COPEER REFRIGERANT PIPINGSupply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft /hard drawn coppe rrefrigerant piping for VRV/ VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquidlines, all accessories except Y joint as per specifications etc as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 821 | 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 822 | 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 823 | 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 824 | 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 825 | 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 826 | 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 827 | 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 828 | 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 829 | 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 830 | 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62mmwith19mm thick insulation |
| 831 | 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 832 | 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62mmwith19mm thick insulation |
| 833 | Supplying, installation, testing and commissioning of insulated Copper Refrigerant Y Joint for VRV piping complete as required. The insulation shall be 19mm thick NITRILE RUBBER as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 834 | Supplying, Installation, Testing and commissioning of rigid UPVC drain Piping with elbows, T- joints, sockets duly insulated with 6 mm thick nitrile rubber insulation with adequate supports as per specifications and instructions as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 835 | 25 mm dia |
| 836 | 32mm dia. |
| 837 | 40 mm dia |
| 838 | 50 mm dia. |
| 839 | CONDENSING UNIT MS PLATFORM STAND FOR VRF ODUsSupply and Installation of Hot-dip galvanised MS platform stand of adequate wightbearing capacity, should be safe for maintenace and installation work. It to be mounted on wall or Slab provided by Civil agency. Double rubber pads & galvanised MS plates for each leg as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 840 | LOW SIDE (DUCTING, GRILLS,DIFFUSER AND INSULATION)Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 841 | Thickness 0.63 mm sheet |
| 842 | Thickness 0.80 mm sheet |
| 843 | Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 844 | Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 845 | Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 846 | 16.18 Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 847 | Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 848 | Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 849 | Supply and fixing of Acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 850 | OUTDOOR PANELDesigning, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 14 guage thick CRCA sheet, dust and vermin proof, indoor type MV Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear / bottom access for cable alley and with segregated bus-bar chamber and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, bottom base channel of MS section not less than 100mmx50mmx5mm (thick). Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates powder coated painting of approved shade after antirust treatment (with min seven tanks ) and marking as specified. Switch boards complete as per schematic diagram: INCOMER 1 nos, 125 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 16 KA (ICS=ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Set with microprocessor release for O/L, S/C & E/F protection.For Mains Transformer1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBARTPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOING BREAKERS6 Nos.63 Amp Three Pole Moulded Case Circuit Breaker of 25KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. For Light Ckts |
| 851 | Supply,installation,testing and commissioning alised floor/wall mounted type made of 2 mm thick steel sheet duly painted complete as per the specifications and drawing and as detailed below as required to have complete solution in all respects and to best statisfaction of engineer in charge. 1 no.500 Amps TPN MCCB incomer with KWH meter, phase indicating lamps with control fuse & toggle switch, voltmeter and selector switch, ammeter with CTs and selector switch 12 nos. of 40 Amps TPN MCB outgoing for VRV OD units with star delta starter 6 nos. of 63 Amps TPN MCB outgoing for VRV OD units with star delta starter.. |
| 852 | Supplying, Installing,Testing and Commisioning of Split Type Air Conditioner 1.5 TR 3 Star inverter SPLIT AIR CONDITIONER (Hot and Cold) confirming to I.S.I -1391 Part-1992 with ammendent No. 1(expect power consumptions norms) fitted with Hermatically shielded Air Conditioner with installation & testing and commissioning etc as required to have complete solution in all respects and to best statisfaction of engineer in charge..A.C. Unit 1.5 Ton capacityMakes: Blue Star/O General/Daikin or equivalent |
| 853 | Supplying and fixing wall mounting voltage stabilizer of following rating with output 240 volts with voltage regulation range from 130volt to 280volts and auto cut off beyond this range and time delay operation for the surges and fluctuations suitable for 2 TR capacity split type Air-Conditioner including making connections etcas required to have complete solution in all respects and to best statisfaction of engineer in charge. Makes: Godrej, Whirlpool, Microtek.Automatic Voltage Stabilizer 5KVA or equivalent |
| 854 | P/F of M.S out door heavy duty stand powder coated suitable to hang 1.5 TR split A.C with six Nos. Anchor bolts as required as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 855 | S/F of Copper tube with insulation for A.C 1.5 TR capacity as required to have complete solution as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 856 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, 2.5Sq.mm 3Core cable in the existing surface/ recessed steel/ PVCconduit as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 857 | S/F of Drain pipe of size 1\\" Dia (25mm) complete with elbows tees,socket etc. of superior quality as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 858 | Providing and fixing PVC Trunking for covering of copper pipe of following size 105X50mm as required complete in all respects. Makes: Polyplast,Deeplast,BEC or equivalent |
| 859 | WET RISER,HYDRANTS,ADDRESSABLE FAFD SYSTEM , FIRE EXTINGUISHERS & FIRE EXIT SIGNAGE ETCFire Alarm System- Wellness CentreSupply, Installation, Testing and Commissioning of addressable Heat detector with fixed and rate of raise feature including mounting base with LED… etc. complete as required. Each Detector should have 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005 .Detector should monitor Electromagnetic interference and report to the panel - current and average values. Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) as required to have complete solution in all respects and to best statisfaction of engineer in charge.Make Autronica/ Notifire / Bosch or Equivalent |
| 860 | Supply, Installation, Testing and Commissioning of addressable multisensor smoke detector including mounting base with LED… etc. complete as required with 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements; Drift Compensation feature & Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) as required to have complete solution in all respects and to best statisfaction of engineer in charge. Make: Autronica/ Honneywell (Notifire) / Bosch or Equivalent |
| 861 | Supply, Installation, Testing and Commissioning of addessable Single ACTION manual pull station & necessary fixing arrangements with key complete as required. MCP should have IP40 or better protection rating Shall be UL/EN/VDS Certified as required to have complete solution in all respects and to best statisfaction of engineer in charge. Make: Autronica/ Honneywell (Notifire) / Bosch or Equivalent |
| 862 | Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required to have complete solution in all respects and to best statisfaction of engineer in charge.Make: Autronica/ Honneywell (Notifire) / Bosch or Equivalent |
| 863 | SITC of Loop Powered Sounder cum Strobe with inbuilt isolators as per NFPA 72 style 7 wiring requirements & with 32 different tone variants selection options & adjustable sound pressure by 5 levels, the sound pressure 92.1 dB(A), with flasher having Synchronized flash rate of 1 Hz and Light intensity > 2 cd, should have IP40 or better protection rating be programmed from the panel. Shall be EN54 / Vds/UL Certification as required to have complete solution in all respects and to best statisfaction of engineer in charge. Make: Autronica/ Honneywell (Notifire) / Bosch or equivalent |
| 864 | Supply, Installation, Testing and Commissioning of Microprocessor based Intelligent Addressable Main Fire Alarm Control Panel with Suitable Loops modules and each loop capable of supporting not less than 250 devices (detectors & modules should be in any combination) ; Loop length up to 1.5 km, 8\\" Color LCD touch screen display with bright colors to indicate alarms and events, 4 Nos of Integrated Ethernet Ports & 2 Nos of RS 485 for networking, 200 Nos of Soft programmable keys with status indicators for individual triggering of NAC Ouputs, evacuation speaker zones, AHU Modules, Damper switch, Smoke extraction Fans, Lifts.. etc. The Panel shall support 10000 history logs in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger.The panel should also have IP30 or better protection. The panel shall have seamless integration with EVAC certified Public Address System and shall be complete with all accessories . EN54 / Vds/UL Certification as required to have complete solution in all respects and to best statisfaction of engineer in charge.Make: Autronica/ Honneywell (Notifire) / Bosch or equivalent |
| 865 | Supply, Installation, Testing and comissioning of single core multistrand 1.5 sq mm annealed copper conductor speaker cable in existing pipe/ channel I/C connection etc as required to have complete solution in all respects and to best statisfaction of engineer in charge.Make Finolex/Polycab/ KEI or Equivalent |
| 866 | Supply and erection of 25 mm dia PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. Make Diplast/Polyplast/ or Equivalent |
| 867 | Supply, Installation, Testing and comissioning of 2 KVA UPS cum Inverter with 1 hour Backup. Make LIBERT EINOVA / Luminous/APC as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 868 | Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers as required to have complete solution in all respects and to best statisfaction of engineer in charge. Makes : Bosch / Honeywell /System Sensor/ Ateis Ceiling Mounted Speakers or equivalent |
| 869 | PA CONTROLLERSupplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation completeas required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 870 | DIGITAL AMPLIFIERSSupplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply as required to have complete solution in all respects and to best statisfaction of engineer in charge. |
| 871 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc as required to have complete solution in all respects and to best statisfaction of engineer in charge.speaker cable Two pair, 2-core, 1.5 sqmm |
| 872 | Fire Fighting System for wellness CentreExcavating trenches of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m ncluding getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as required to have complete solution in all respects and to best statisfaction of engineer in charge..Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia |
| 873 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade as required to have complete solution in all respects and to best statisfaction of engineer in charge.100 mm nominal boreMakes:- Jindal/Tata./Surya Tube or equivalent |
| 874 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required to have complete solution in all respects and to best statisfaction of engineer in charge.2 way - 100 mm dia M.S. Pipe |
| 875 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, as required to have complete solution in all respects and to best statisfaction of engineer in charge.(Terrace Pump)(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.Make:- Kirloskar/Siemens/Grundfoss or equivalent |
| 876 | 900 lpm at 35 m Head |
| 877 | 450 lpm at 35 m Head |
| 878 | Supply, installation, testing and commissioning of Pressure switch for fire pumps of approved make,including necessary wiring and cut off valve up to central panel & other material as required to have complete solution in all respects and to best statisfaction of engineer in charge.Make:- Indfoss /System Sensor or equivalent |
| 879 | Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make:- H Guru, Bell, Fiebig or equivalent |
| 880 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required to have complete solution in all respects and to best statisfaction of engineer in charge.100 mm dia.Makes:-Zoloto/Sant/Audco or equivalent |
| 881 | Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge.100 mm dia.Makes:-Zoloto/Sant/Audco or equivalent |
| 882 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :Makes:- Jindal/Tata./Surya Tube or equivalent |
| 883 | 80 mm nominal bore |
| 884 | 100 mm nominal bore |
| 885 | Providing & fixing Gun Metal fire hydrant single headed landing valve with 80 mm N.B. flanged inlet, G.M spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS standards as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make: Minimax/OMEX/Padmini or equivalent |
| 886 | Providing & Fixing of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 40 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Rate shall include 25 mm dia M.S. pipe connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 887 | Providing & Fixing of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with G.M male & female instantaneous type coupling (IS 903) (For internal and External hydrant system) as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 888 | Providing and Fixing Gun Metal 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 889 | Providing & fixing ball valve 25mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Sant/Zoloto/Audico or equivalent |
| 890 | Providing and fixing standard fire mans axe with heavy duty insulated rubber handle.Make: Minimax/OMEX/Padmini or equivalent |
| 891 | Providing of FHC Door made of 16 gauge MS Sheet with frame of size 105x70mm complete door and frame assembly including all hardwares (Concealed Flush handle,Allen Key Lock, MS Hinges, 5mm Thick Float glass) & accesories . The door to be painted with fire resistance paint. The scope shall also include the painting of the frame with the same paint as the shutter or required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent(Approx. size of door: 900mm Wide & 1500mm Height)Make: Minimax/OMEX/Padmini or equivalent |
| 892 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 893 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 894 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalentMake: Sintex/D.Plast or Equivalent |
| 895 | Providing and fixing Carbon dixoide CO2 4.5 kg type fire extingushers ISI mark. CE and EN Certfied, consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and M S Wheel type complete with internal charge as required complete in all respects.Make: Minimax/Aska/ Gilpro oe equivalent |
| 896 | Providing and fixing stored pressure vessel ABC 6 Kgs. Powder type fire extingushers ISI mark. CE and EN Certfied,consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalentMake: Minimax/Aska/ Gilpro or equivalent |
| 897 | Providing & fixing of IS marked 15683 Water type 9 Litre (S/P) cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, etc. finished externally with red enamel paint and fixed to wall with brackets complete with internal charges required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalentMake: Minimax/Aska/ Gilpro or equivalent |
| 898 | Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge. |
| 899 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 900 | Pendent type sprinkler |
| 901 | Horizontal side wall sprinkler |
| 902 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalentLength upto 1000 mm |
| 903 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shaderequired complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 904 | 25 mm nominal bore |
| 905 | 32 mm nominal bore |
| 906 | 40 mm nominal bore |
| 907 | 50 mm nominal bore |
| 908 | 65 mm nominal bore |
| 909 | 80 mm nominal bore |
| 910 | 100 mm nominal bore |
| 911 | 150 mm nominal bore |
| 912 | Providing & fixing flow switch in following sizes M.S. pipe including connection required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 913 | 100mm dia |
| 914 | 150mm dia |
| 915 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalentMakes:-Zoloto/Sant/Audco |
| 916 | 150 mm dia. |
| 917 | 100 mm dia. |
| 918 | 50 mm dia. |
| 919 | Supplying, installation, testing & commissioning of Test and Drain Valve Assembly, including accessories such as test valve, unions, sight glass & drain valve for 50mm pipes size required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 920 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a surface the cable run shall be fixed on M.S. clamps etc. of suitable size & brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalentarmoured cable 6 Sqmm(3core)Make: KEI/ Polycab or equivalent |
| 921 | Fabricating & Supply, installing, testing and commissioning of sheet steel clad floor mounting control panel having suitable size for control of 1 nos. booster pumps 5.5 KW/7.5HP each having suitable incoming MCCB, incoming voltmeter with selector switch and fuses. DOL Starter with hand reset overload cum single phase preventor type relay, Ammeters to read current in any one phase, alarm with reset push button which will automatically reset for the next cycle. (As per the Technical Specifications) (At Terrace floor) required complete in all respects as per direction of Engineer-in-charge.Makes:- Advance/Delight Power Control/ Quality Fire or equivalent. |
| 922 | Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc required complete in all respects as per direction of Engineer-in-charge.150 mm width x 50mm depth x 1.6 mm thickness. |
| 923 | Supply, installation, testing and commissioning of electrically driven high pressure centrifugal fire hydrant /Sprinkler Pump, suitable for automatic operation consisting of the following:(a).Multistage Multi-outlet, centrifugal pump (Flow : 2280 LPM and Head : 80 mtr), suitable for operation on 415 volts ± 10 %, 3 phase, 50 HZ A.C supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have C.I. casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and S.S. (410) Shaft with mechanical seal, capable for delivering the required flow at the required head to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side.(b).Squirrel cage induction motor, TEFC type suitable for operation on 415 volts, 3 phase 50 HZ A.C supply, of suitable Capacity (45 KW.) for the above pump with synchronous speed of 2900 RPM, conforming to IP 55 protection & class F insulation. The motor shall conform to IS 325-1978 (up to date) with flexible coupling and coupling guard, complete as required.Common base plate for (a) and (b) from G.I.Channel for required size.(d)d) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads.2280 lpm at 88 m Head required complete in all respects as per direction of Engineer-in-charge.Make:- Kirloskar/Siemens/Grundfoss or equivalent |
| 924 | Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended upto date.A) Horizontally mounting,centrifugal type single/multi-stage fire pump having cast ironbody, bronze impeller,stainless steel shaft &capable of delivering 2280LPM against a total head of 80 M complete withnecrssary Y stainer on the sunction side and pressure gauge with stop cocks etc. on the delivery side including bybass arrangement (with 50mm dia GM stop valve and upto 5mGI stop valve and upto 5M GI medium pipe) for perodical testing of thepumping set of the pumping set as per TAC rules. b) Water cooled TAC approved Diesel Engine suitable for the developing at least 62 BHP at 2150RPM for above pumping complete with autmatic starting mechanism, batteries,automatic battery charger unit,flexble coupling withthe pump,coupling with the pump,fuel tank,silencer,exhaust pipe with insulation appro. 25m length& all standard accessories as requrid asper TAC rules including earthing,mandatory spares and tool kit. c) Common bed plate for mounting pump and Engine fabricated of suitable MS channel as per manufacturer recommendations. d)Suitable RCC pump foundation as per manufacture design 8Nos Dunlop Anti-vibration(cushy foot) heavy duty mounting pad required complete in all respects as per direction of Engineer-in-charge.2280 lpm at 88 m HeadMake:- Kirloskar/Siemens/Grundfoss or equivalent |
| 925 | JOCKEY PUMP:-Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)(a)Horizontal pump(Flow :180 LPM and Head :80mtr) suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required.The pump casing shall be CI, shaft shall be SS & impeller/ shaft sleeve/casing wearing ring shall be bronze. The pump shall be provided with mechanical seal The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. b)Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts +10%-10% 3 phase 50HZ AC supply of suitable capacity(appro11KW) for the above pump with synchronous speed of 1500/3000 RPM confirming to IS325 &duly coupled with above pump coupled with flexible coupling including earthing as per relevant Indian Standard and specification. c) Common bed plate for mounting pump and Motor fabricated of suitable MS channel as per manufactures recommendation. d)Suitable RCC pump foundation as per manufactures design Dunlop 4 Nos Dunlop Anti-vibration (cushy foot) heavy duty mounting pads required complete in all respects as per direction of Engineer-in-charge.180 lpm at 88 m HeadMake:- Kirloskar/Siemens/Grundfoss or equivalent |
| 926 | Providing & fixing of pressure switch in M.S. pipe line including connection etc required complete in all respects as per direction of Engineer-in-charge.Make:- Indfoss /System Sensor or equivalent |
| 927 | Providing, fixing, testing and commissioning of Perched air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, minimum 50 mm dia inlet with isolating valve duly painted from inside and outside with two coats of synthetic enamel paint over a coat of primer complete as required and Suitable cement concrete foundation with plaster, along with all neccessory floor supporting stand and foundation arrangement.(Vessel should be suitable for rated working pressure) as required complete in all respects and to the best satisfaction of Engineer-in-charge.(450 mm dia & 2000 mm height) |
| 928 | Providing & fixing of Anti vibration Expansion Bellow at pump outlet etc.required complete in all respects as per direction of Engineer-in-charge.Make:- H Guru, Bell, Fiebig or equivalent |
| 929 | 150 mm dia. |
| 930 | 80 mm dia. |
| 931 | Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make:- H Guru, Bell, Fiebig or equivalent |
| 932 | Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt, nuts, gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm. as required complete in all respects and to the best satisfaction of Engineer-in-charge.Makes:-Zoloto/Sant/Audco or equivalent |
| 933 | 200 mm dia. |
| 934 | 150 mm dia. |
| 935 | 100 mm dia. |
| 936 | 80 mm dia. |
| 937 | 50 mm dia. |
| 938 | Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge.Makes:-Zoloto/Sant/Audco or Equivalent |
| 939 | 200 mm dia. |
| 940 | 150 mm dia. |
| 941 | 100 mm dia. |
| 942 | 80 mm dia. |
| 943 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange as required complete in all respects as per direction of Engineer-in-charge.200 mm dia.Makes:-Zoloto/Sant/Audco or equivalent |
| 944 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes as required complete in all respects as per direction of Engineer-in-charge. (EXTERNAL WORKS)Makes:- Jindal/Tata./Surya Tube or equivalent |
| 945 | 100 mm dia. |
| 946 | 150 mm dia. |
| 947 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade as required complete in all respects as per direction of Engineer-in-charge. (PUMP ROOM WORKS) |
| 948 | 80 mm nominal bore |
| 949 | 150 mm nominal bore |
| 950 | 200 mm dia (wall thickness 6.3 mm) |
| 951 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required complete in all respects as per direction of Engineer-in-charge.:Make: Minimax/OMEX/Padmini or equivalent |
| 952 | Providing & Fixing of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with G.M male & female instantaneous type coupling (IS 903) (For internal and External hydrant system) as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 953 | Providing and Fixing Gun Metal 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 954 | Providing of FHC Door made of 16 gauge MS Sheet with frame of size 105x70mm complete door and frame assembly including all hardwares (Concealed Flush handle,Allen Key Lock, MS Hinges, 5mm Thick Float glass) & accesories . The door to be painted with fire resistance paint. The scope shall also include the painting of the frame with the same paint as the shutter or complete as per direction of Engineer-in-charge.(Approx. size of door: 900mm Wide & 1500mm Height)Make: Minimax/OMEX/Padmini or equivalent |
| 955 | Providing & fixing Gunmetal Collecting head inlet connection to external hydrant ring/hydrant riser with 4 Nos. 63 mm dia instantaneous type inlet and 150 mm dia flanges outlet conforming to IS:904 with blank cap and chain as required complete in all respects as per direction of Engineer-in-charge.Make: Minimax/OMEX/Padmini or equivalent |
| 956 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 as required complete in all respects as per direction of Engineer-in-charge. |
| 957 | FIRE FIGHTING PANEL Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :INCOMING\\"400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0 500V with selector switch Digital Ammeter (0-400 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A\\"\\"OUTGOING( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)\\"\\"Main Fire Pump200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation\\"\\"Jockey Pump100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.- 2nos.\\"\\"DIESEL ENGINE CONTROLControl for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engineSystem ControllerDesigning, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification\\" |
| 958 | Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge. It should be as required complete in all respects as per direction of Engineer-in-charge. |
| 959 | Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required complete in all respects as per direction of Engineer-in-charge.150 mm width x 50mm depth x 1.6 mm thickness. |
| 960 | Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering as required complete in all respects as per direction of Engineer-in-charge.:- |
| 961 | Armoured cable 16 sq. mm (4 core) |
| 962 | Armoured cable 35 sq. mm (4 core) |
| 963 | Armoured cable 70 sq. mm (4core) |
| 964 | Copper Flexible Cable 1.5 Sq. mm(6 Core) |
| 965 | INTELLIGENT FIRE ALARM SYSTEM- Hostel & Water ParkSupplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP as required complete in all respects as per direction of Engineer-in-charge.Two Loop Panel. |
| 966 | Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system as required complete in all respects as per direction of Engineer-in-charge. |
| 967 | Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches as required complete in all respects as per direction of Engineer-in-charge. |
| 968 | Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base as required complete in all respects as per direction of Engineer-in-charge. |
| 969 | Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor as required complete in all respects as per direction of Engineer-in-charge. |
| 970 | Supplying, installation, testing & commissioning of addressable fire control module as required complete in all respects as per direction of Engineer-in-charge. |
| 971 | Supplying, installation, testing & commissioning of addressable phone control module as required complete in all respects as per direction of Engineer-in-charge. |
| 972 | Supplying, installation, testing & commissioning of addressable manual call point as required complete in all respects as per direction of Engineer-in-charge. |
| 973 | Supplying, installation, testing & commissioning of addressable horn cum strobe as required complete in all respects as per direction of Engineer-in-charge. |
| 974 | Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath as required complete in all respects as per direction of Engineer-in-charge. |
| 975 | Supply, Installation, Testing and Commissioning of UL / EN 54 Listed Addressable LPG Detector for the LPG Gas Bank complete with Module.It shall be connected to the fire alarm panel by use monitor modules and shall be UL/EN Listed.The detector shall be mountable on a wall or round support pole as required complete in all respects as per direction of Engineer-in-charge. |
| 976 | Fire Fighting System-Hostel & Water ParkPUMPSSupplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required complete in all respects as per direction of Engineer-in-charge.i) Horizontal mounted End Suction type fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 2280 LPM against a total head of 70 M while running at 2900 RPM complete in all respect.ii) Squirrel cage, induction motor TEFC type suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating for the above pump with synchronous speed of 2900 RPM with flexible coupling and coupling guard .iii) Common bed plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy duty Anti Vibration pads (4 Nos., heavy duty).iv) Coupling and coupling guard for direct coupling of pump and motor.Main Fire Pump2280 lpm at 70 m HeadNote: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm 2 pressure at the highest/farthest point. |
| 977 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects,as required complete in all respects as per direction of Engineer-in-charge. (Diesel Driven Pump)i) Horizontal mounted end suction type fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 2280 LPM against a total head of 70 M while running at 1800/2300 RPM complete in all respect.ii) Radiator cooled diesel engine of suitable BHP at 1800/2300 RPM for the above pump complete with standard accessories & suitable cooling system as described in specifications.iii) Common base plate for mounting pump & engine of requisite strength manufactured out of M.S. channels as per manufacture's recommendation with heavy duty Anti Vibration pads. (Cushy foot) (6 Nos., heavy duty)2280 lpm at 70 m HeadNote: * The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm 2 pressure at the highest/farthest point. |
| 978 | Providing and fixing exhaust for Diesel engine driven pump exhaust M. S. pipe class 'C' 150 mm dia including fitting like flanges, bends, reducers, etc. 50 mm thick fibre wool insulation aluminium cladding, 21 gauge, necessary excavation, fixing of silencer connections at engine exhaust, necessary supports, back filling, cutting and making good, bird proof and weather proof flap as required complete in all respects as per direction of Engineer-in-charge. |
| 979 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required complete in all respects as per direction of Engineer-in-charge. : (Jockey Pump)i) Horizontal mounted end suction jockey pump having cast iron body, volute bronze impeller, stainless shaft capable of delivering 180 LPM against total head of 70 M while running at 2900 RPM complete in all respect. for testing of working of the pumping set as required. ii) Squirrel cage induction motor suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and coupling guard .iii) Common bed plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot)iv) Suitable cement concrete foundation duly plastered and with anti vibration pads.180 lpm at 70 m Head |
| 980 | TERRACE PUMPSSupplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required complete in all respects as per direction of Engineer-in-charge.: (Terrace Pump)i)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520ii) Suitable HP squirell cage induction motor TEFC type suitable for operation on ii)horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.iii) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.iv) Suitable cement concrete foundation duly plastered and with anti vibration pads.450 lpm at 35 m Head (1W + 1 S) |
| 981 | Electrical Panel for Terrace PumpFabrication, supply, Insallation testing & commissioning of Electrical control panel with Remote Start Stop Button ,of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade , cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for Terrace pump, set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 54 With Canopy as required : Incomings1 Nos 63A, 10 kA 4 Pole MCCB, Ics=100% Icu rating Digital Multifunction Meter & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 100 Amps2 nos 40 A, 150 kA TPN MCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 10 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation as required complete in all respects as per direction of Engineer-in-charge.. |
| 982 | CONTROL PANEL FOR MAIN FIRE PUMP HOUSE\\"Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter- connection with suitable size copper conductorcable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :\\" INCOMING250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switchDigital Ammeter (0-250 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A\\"OUTGOING( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.Jockey Pump63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.DIESEL ENGINE CONTROLControl for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engineSystem ControllerDesigning, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification |
| 983 | Supply, of following sizes of 1100 V grade Aluminium conductor armoured cables, XLPE insulated PVC sheathed, conforming to IS 7098 Part 1 complete as required as required complete in all respects as per direction of Engineer-in-charge. |
| 984 | a) 3C x 25 Sq.mm. |
| 985 | b) 3C x 95 Sq.mm. |
| 986 | c) Control Cable 4 C x 1.5 sq.mm. |
| 987 | d) 4C x 16 Sq.mm. (Main supply to Pane1) |
| 988 | e) 3C x 10 Sq.mm. (For Terrace Pump set) |
| 989 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etcas required complete in all respects as per direction of Engineer-in-charge. |
| 990 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 991 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 992 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required complete in all respects as per direction of Engineer-in-charge. |
| 993 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 994 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 995 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete in all respects as per direction of Engineer-in-charge. |
| 996 | 3½ X 95 sq. mm (45mm) |
| 997 | 3½ X 25 sq. mm (32mm) |
| 998 | Control Cable 4 C x 1.5 sq.mm copper conductor. |
| 999 | 4 X 16 sq. mm (25mm) |
| 1000 | 3 X 10 sq. mm (22mm) |
| 1001 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc as required complete in all respects as per direction of Engineer-in-charge. |
| 1002 | PIPES & ACCESSORIESProviding laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes as required complete in all respects as per direction of Engineer-in-charge. |
| 1003 | 150 mm dia (6.35 mm thick) |
| 1004 | 80 mm dia |
| 1005 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: |
| 1006 | 50 mm dia |
| 1007 | 65 mm dia |
| 1008 | 80 mm dia |
| 1009 | 100 mm dia |
| 1010 | 150 mm dia |
| 1011 | 200 mm dia |
| 1012 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required complete in all respects as per direction of Engineer-in-charge.Single headed Stainless steel |
| 1013 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required complete in all respects as per direction of Engineer-in-charge. |
| 1014 | 50mm dia |
| 1015 | 65 mm dia |
| 1016 | 80 mm dia |
| 1017 | 100 mm dia |
| 1018 | 150 mm dia |
| 1019 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required complete in all respects as per direction of Engineer-in-charge. |
| 1020 | 50mm dia |
| 1021 | 65mm dia |
| 1022 | 80 mm dia |
| 1023 | 100 mm dia |
| 1024 | 150 mm dia |
| 1025 | 200 mm dia |
| 1026 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required complete in all respects as per direction of Engineer-in-charge. |
| 1027 | Providing, installation, testing and commissioning of Dual Plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required: |
| 1028 | 50 mm dia |
| 1029 | 80 mm dia |
| 1030 | 100 mm dia |
| 1031 | 150 mm dia |
| 1032 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange as required complete in all respects as per direction of Engineer-in-charge.200 mm dia |
| 1033 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required complete in all respects as per direction of Engineer-in-charge.Stainless Steel (Grade 304) |
| 1034 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve &M.S. Pipe and socket as required complete in all respects as per direction of Engineer-in-charge.30 m |
| 1035 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required complete in all respects as per direction of Engineer-in-charge.Stainless Steel (Grade 304) |
| 1036 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required complete in all respects as per direction of Engineer-in-charge. |
| 1037 | 2 way-100 mm dia M.S. Pipe |
| 1038 | 4 way - 150 mm dia M.S. Pipe |
| 1039 | 3 way - 150 mm dia M.S. Pipe |
| 1040 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required complete in all respects as per direction of Engineer-in-charge. |
| 1041 | Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement :4 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design as required complete in all respects as per direction of Engineer-in-charge. |
| 1042 | Providing and fixing weather proof lockable cabinet of size not less than 0.60 mtr x 0.75 mtr (height) x 0.25 mtr made out of MS sheet of 16 gauge thickness having central opening and 4 mm thick glazed glass doors (Two Nos.) suitably marked on the outside with the letters \\"FIRE HOSE\\" including necessary locking arrangement and shall be painted with two coates red colour. Over a two coats of primer. The cabinet shall be suitable to accommodate 2 Nos. 15 mtr long Hose pipe & 1 No branch pipe nozzle. It shall be mounted on raised Brick platform complete as required.(Cost shall be inclusive of providing break glass box containing key for the cabinet along with hammer) as required complete in all respects as per direction of Engineer-in-charge. |
| 1043 | Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0- 14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc as required complete in all respects as per direction of Engineer-in-charge. |
| 1044 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes as required complete in all respects as per direction of Engineer-in-charge.80 mm DIA |
| 1045 | FIRE EXTINGUISHERS & EXIT SIGN BOARDProviding & fixing of ISI marked (IS: 2878) portable Carbon-di-Oxide fire extinguisher of capacity 4.5 kg flat base including valve discharge hose of not less than 10mm dia. meter complete in all respect including initial fill with Co2 gas confirming to IS 307-1966 and filled to filling ratio of not more than 0.367 as required complete in all respects as per direction of Engineer-in-charge. |
| 1046 | Providing & fixing of ISI marked (IS: 2878) Trolly type Carbon-di-Oxide fire extinguisher of capacity 22.5 kg flat base including valve discharge hose of not less than 10mm dia. meter complete in all respect including initial fill with Co2 gas confirming to IS 307-1966 and filled to filling ratio of not more than 0.367 as required complete in all respects as per direction of Engineer-in-charge. |
| 1047 | Providing & fixing of ISI marked (IS: 13886) trolley mounted fire extinguisher, AFFF Mechnical foam type (gas pressurized) Capacity 50 liter as required complete in all respects as per direction of Engineer-in-charge. |
| 1048 | Providing & fixing of ISI marked (IS: 15683) portable ABC multipurpose type fire extinguisher, Capacity 6 kg as required complete in all respects as per direction of Engineer-in-charge. |
| 1049 | SITC of LED type Fire EXIT signage board of size 600 mm x 300 mm made of Alunimium Extrusion alloy suitable for 230 V single ohase AC supply complete with wall/ceiling hnaging arrangement as required complete in all respects as per direction of Engineer-in-charge. |
| 1050 | EV CHARGING STATIONSProvoding ,fixing , testing and commissioning of DC EV CHARGER 3.3 KW As per Bharat EV Specification Connectors: CCS2 Number of plugs: 2 AC input voltage: AC 380V±15% AC input frequency: 45-65Hz DC output power: 60KW DC output voltage range: 150 VDC – 1000 VDC DC output current: 0-250 AmpConnectivity authorization: RFID/NFC, App, VIN IP55 *1 year’s warranty *5m cable *4G/Ethernet/Wi-Fi*OCPP 1.6 *7-inch LCD screen/LED light as required complete in all respects as per direction of Engineer-in-charge.3.3 KW |
| 1051 | Provoding ,fixing , testing and commissioning of DC EV CHARGER 30KWAs per Bharat EV Specification Connectors: CCS2Number of plugs: 1 AC input voltage: AC380V±15%AC input frequency: 45-65HzDC output power: 30KW DC output voltage range: 150 VDC – 1000 VDC DC output current: 80A *1 plug Connectivity authorization: RFID/NFC, App, VIN IP55 *1 year’s warranty *5m cable *4G/Ethernet/Wi-Fi *OCPP 1.6 *7-inch LCD screen/LED light as required complete in all respects as per direction of Engineer-in-charge.30 kw |
| 1052 | Ongrid Solar Photovoltaic Power PlantSupply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required complete in all respects as per direction of Engineer-in-charge. |
| 1053 | MRL LIFTS (WELLNESS CENTRE)Providing Istallation,Testing & Commissioning of one No. 13 Passengers (884 Kgs) elevator (machine room less/gearless Monospace) having following specifications:-Makes:- Kone/TK Elevator India Pvt. Ltd.Technical Specifications:-13 pax 3 stops, Unit 1Quantity :-1 ( One ) unit(s)Model :-MRLAssembled Product :-Passenger ElevatorCapacity :-13 persons,884 kgSpeed :-1.00 m/sStops & Openings :-3 Stops, 3 OpeningsFloor designations :-G,1,2Machine type & Location :-MRL- Gearless machine to be placed in the shaft top of the guide railsControl :-Simplex Collective Selective ControlDrive :-ACWVFPower supply :-415 volts, 3 phase, 50Hz, ACHoist way dimensions :-2000 mm wide x 2400 mm deepCar travel :-12000 mmOverhead :-3800mmPit depth :-1600mmCar dimensions :- 1100 mm wide x 2000mm deep x 2200mm highDoor opening :-900mm wide x 2000mm highOpen Through Door :-No ,Car door :-2 panel automatic Centre opening door with ACVF drive in Stainless steel Hairline finish, Landing door :-2 panel automatic Centre opening door in Stainless steel Hairline finish on 2nd floors, Car suspended ceiling :-Stainless steel Hairline finish with Round LED for car lighting, 2Car flooring :-PVC Flooring, Handrail :-Round handrail in Stainless steel finish provided on rear wall of car, Landing operating panel :- Individual landing operating panel for each elevator |
| 1054 | Others Features included :-1. Alarm button in car operating panel with battery back-up2. Automatic operation for car fan, 3. Adjustable door open time, 4. Anti-nuisance (empty car), 5. Anti-nuisance (car call cancellation at direction reversal)6. Blower fan in car for ventilation7. Braille on push buttons8. Car call cancellation by double pressing floor button in car operation panel9. Door open and door close buttons in car operating panel10. Door closing retries11. Door nudging12. Emergency light13. Full load by-pass14. Home landing15. Infra-red screen for car door16. Intercom17. Jammed landing operating panel call button by-pass18. Motor overheat protection19. Overload function with audio-visual indication in car operating panel20. Phase failure and phase reversal protection21. Automatic rescue device in case of power failure22. Attendant control23. Red dot matrix scrolling display in car operating panel24. Red dot matrix scrolling display in landing operating panel on All Floors25. Fireman control26. Fireman emergency return27. Voice announcement unit in English languageComplete in all respect including providing & fixing guide rails, minor building works, scaffolding, putting into operation & final testing etc. as reqd. Total above lift Amount with 5 Year Maintenance |
| 1055 | MRL LIFTS (Hostel):-Supplying, Installation, Testing & Commissioning of 08 passenger (544 Kg ) NS/MRL lift having contract speed of 1.00 MPS serving different floors in the lift shaft and having barrier free requirements as per Appendix-VII of CPWD General Specifications for Electrical Works ( Part-III-Lifts & Escalators), 2003 and as per detailed specifications enclosed as under :- Speed - 1.00 MPS Floors to be served - Basement, Ground + 3Travel - 20 Meters ( approx.) Stops & Opening - Five ( Basement, G + 3) on same sideMachine: Gearless machine with permanent magnet synchronous motor. Controller - Modular control microprocessor system combined with variable frequency and variable voltage system which can be located in door column at the top floorControl - Variable frequency with closed loop vector control.Operation - Automatic, microprocessor based, duplex collective selective with / without attendant Power - 415 V, 3 Phase, 50 Hz, AC , 4 wire system Door Operation -Variable speed with close loop control.Type of doors Car Entrance - Centre opening power operated horizontal sliding doors in stainless steel hairline finish Landing doors - Stainless steel in hairline finish with infrared door protection device.Clear Opening of Doors - 800 mm ( W) x 2000 mm ( H) Position of Machinery - To be placed directly above hoist way. Flooring - Vinyl Tile.Lighting - Diffused Lighting in car Signals :- Car operating panel in stainless steel, digital up down indicator, emergency light and alarm. |
| 1056 | Other Features - Battery Operated Emergency Light with Rechargeable Battery. Battery Operated Emergency Alarm with Rechargeable Battery Adjustable Guide Shoes Micro Movement L.E.D. Based Buttons System Capable of withstanding (+) 10% to (- )10% variation in supply voltage fluctuations Hands free press and speak intercom Steel items such as machine beams, door frames sill angles, fascia plates, spring buffers Full height infrared safety curtain with 74 intersecting beams Car platform constructed out of cold rolled grain oriented formed sheets of steel Fire man switch at main lobby Car false ceiling in stainless steel in mirror finish with concealed CFL lights Pit Ladder Motor tested for 180 starts per hour Automatic rescue device to automatically bring the elevator to nearest landing in case of power failure with SMF battery backup of 30 minutes. There shall be an automatic phase reversal correction device which will automatically align the supply phases in case of phase reversal Digital lift announcement system shall be provided in car only to give an audio visual confirmation of elevator arrival. However the visual indicators shall also be provided at each floor to indicate car position TRACTION SHALL BE BY MEANS OF FLAT POLYURETHANE COATED STEEL BELTS Complete in all respect including providing & fixing guide rails, minor building works, scaffolding, putting into operation & final testing etc. as reqd. Total above lift Amount with 5 Year Maintenance |
| 1057 | PLUMBING & ACCESSORIESUPVC PIPES WITH ACCESSORIESProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings ( bends,Tees,Reduction Tees,End Cap etc as per site re This includes jointing of pipes & fittings with one step CPVC solvent cement, testing of joints complete as per direction of Engineer in Charge.Scope shall also include excavation in all kind of soil, refilling, ramming, shoring, removing the excavated surplus material, providing adequate support to the pipe and making good the same as required complete in all respects as per direction of Engineer-in-charge. The pipe shall not be less than 750 mm below ground level at any point. |
| 1058 | 65 mm nominal dia Pipes |
| 1059 | 80 mm nominal dia Pipes |
| 1060 | 100 mm nominal dia Pipes |
| 1061 | 150 mm nominal dia Pipes |
| 1062 | 200 mm nominal dia Pipes |
| 1063 | 300 mm nominal dia Pipes |
| 1064 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required and the same have to be installed in the UPVC pipes as detailed above as required complete in all respects as per direction of Engineer-in-charge. |
| 1065 | 50mm dia |
| 1066 | 80 mm dia |
| 1067 | 100 mm dia |
| 1068 | 150 mm dia |
| 1069 | 200 mm dia |
| 1070 | 300 mm dia |
| 1071 | Providing, installation, testing and commissioning of flanged non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required and the same have to be installed in the UPVC pipes as detailed above as required complete in all respects as per direction of Engineer-in-charge. |
| 1072 | 50 mm dia |
| 1073 | 100 mm dia |
| 1074 | 200 mm dia |
| 1075 | 300 mm dia |
| 1076 | Providing, installation, testing and commissioning of Vertical Type Check Valve, Vertical Non-return Valve of following sizes complete with rubber gasket, Gl bolts, nuts, washers etc.as required and the same have to be installed in the UPVC pipes as detailed above as required complete in all respects as per direction of Engineer-in-charge.100 mm dia |
| 1077 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required complete in all respects as per direction of Engineer-in-charge. |
| 1078 | 100 mm dia |
| 1079 | 200 mm dia |
| 1080 | WATER TRANSFER PUMPSUG TANK & FILLING LINE PUMPSDesigning, Supply, installation , testing & commissioning Twin headed (Commom suction and discharge head) Single/multistage centrifugal monoblock pumping set with Cast Iron impellors, Carbon steel Pump shaft, base plate, Gland Packed seal , connected to TEFC Ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with pressure gauge , vibration elimination pads, dry run protection etc. complete with base and frame, nuts,anchors and bolts. The pump should be rated at the premium efficiency rating of IE. The pump inclosure to be minimum IP 44 / IP 55 rated and insulation class to be B / F. The vender shall submit performance curve, GA drawing and technical data sheet to the consultant prior to installation. The pump shall be capable to work with a negative suction of upto 5 mtr. without any lag in the efficiency.+C1172:C1176The pump shall be assembled for Twin headed (Commom suction and discharge head) circulation pump and shall include the cost of Stainers, NRVand Valves etc and all other accessories required for the proper completion of the work as desired on the site and by the Engg-in-charge..The pump shall work in (W +S) mode as per details given below:-The pump shall be installed on suitable RCC foundations and with anti-vibration pads complete as per requirement and as per instructionsThe pumps shall work in cyclic operation with auto switching feature after every 4 hours and in the event of failure of any pump the other pump shall automatically start operation. Low level water indiactor also be provided in the UG tank for automatic opeartion of the pumps tp maintain required level of water. Cost of all the required cabling and associated accessories shall e included in the cost and nothing extra shall be paid on this account as required complete in all respects as per direction of Engineer-in-charge. |
| 1081 | FOR 250 KL UG TANKCENTRIFUGAL MONO-BLOCK PUMP With 20 H.P capacity (Model KDS -2030++, of Kirloskar Pumps or as approved by engineer / Consultant)No of Pumps :- 2 (1w + 1s) |
| 1082 | FOR FILLING LINECENTRIFUGAL MONO-BLOCK PUMP With 20 H.P capacity (Model KDS -2030++, of Kirloskar Pumps or as approved by engineer / Consultant)No of Pumps :- 2 (1w + 1s) |
| 1083 | PUMPS FOR SLIDESDesigning, Supply, installation , testing & commissioning Twin headed (Commom suction and discharge head) Single/multistage centrifugal monoblock pumping set with Cast Iron impellors, Carbon steel Pump shaft, base plate, Gland Packed seal , connected to TEFC Ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with filled pressure gauge , vibration elimination pads, dry run protection etc. complete with base and frame, nuts,anchors and bolts. The pump should be rated at the premium efficiency rating of IE. The pump inclosure to be minimum IP 44 / IP 55 rated and insulation class to be B / F. The vender shall submit performance curve, GA drawing and technical data sheet to the consultant prior to installation. The pump shall be capable to work with a negative suction of upto 5 mtr. without any lag in the efficiency.The pump shall be assembled for Twin headed (Commom suction and discharge head) circulation pump and shall include the cost of Stainers, NRVand Valves etc and all other accessories required for the proper completion of the work as desired on the site as required complete in all respects as per direction of Engineer-in-charge.The pump shall work in (W +S) mode as per details given below:-The pump shall be installed on suitable RCC foundations and with anti-vibration pads complete as per requirement and as per instructionsThe pumps shall work in cyclic operation with auto switching feature after every 4 hours and in the event of failure of any pump the other pump shall automatically start operation |
| 1084 | CENTRIFUGAL MONO-BLOCK PUMP With 7.5 H.P capacity (Model KDS -822++, of Kirloskar Pumps or as approved by engineer / Consultant)Spider Slide No of Pumps :- 5 (4w + 1s)Water flow rate 1000 LPM @ 18 m. Head |
| 1085 | CENTRIFUGAL MONO-BLOCK PUMP With 7.5 H.P capacity (Model KDS -822++, of Kirloskar Pumps or as approved by engineer / Consultant)Spider Slide 32\\" Open Body Slide & 32 \\" Closed Body SlideNo of Pumps :- 2 (1w + 1s)Water flow rate 1500 LPM @ 12 m Head |
| 1086 | CENTRIFUGAL MONO-BLOCK PUMP With 5 H.P capacity (KDS515+/KDS-520+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)Kids Fun K2No of Pumps :- 3 (2 w + 1s)Water flow rate 2500 LPM @ 6m Head |
| 1087 | CENTRIFUGAL MONO-BLOCK PUMP With 5 H.P capacity (KDS515+/KDS-520+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)96\\" Family Slide No of Pumps :- 2 (1 w + 1s)Water flow rate 1500 LPM @ 6 m Head |
| 1088 | CENTRIFUGAL MONO-BLOCK PUMP With 5 H.P capacity (KDS515+/KDS-520+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)Rain Dance (Jungle Theme)No of Pumps :- 3 (2 w + 1s)Water flow rate 1500 LPM @ 6 m Head |
| 1089 | CENTRIFUGAL MONO-BLOCK PUMP With 3 H.P capacity (KDS 314+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)23 \\" ML(06 Lane)No of Pumps :- 3 (2 w + 1s)Water flow rate 1000 LPM @ 6m Head |
| 1090 | CENTRIFUGAL MONO-BLOCK PUMP With 3 H.P capacity (KDS 314+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)Tots ActivityNo of Pumps :- 5 (4 w + 1s)Water flow rate 1000 LPM @ 6m Head |
| 1091 | CENTRIFUGAL MONO-BLOCK PUMP With 12.5 H.P capacity (KDS-1331+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)Water Play Station (MPWPS)No of Pumps :- 6 (5 w + 1s)Water flow rate 2000 LPM @ 14 m Head |
| 1092 | CENTRIFUGAL MONO-BLOCK PUMP With 20 H.P capacity (KDS-2030+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)For Lazy River |
| 1093 | FILTRATION PLANTRe-Circulation PumpDesigning, Supply, installation , testing & commissioning Twin headed (Commom suction and discharge head) Single/multistage re- circulation pumping set with Highly chemical resistant with all metal internal components being Stainless Steel., Mechnical seal , connected to TEFC Ventilated induction motor , suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with pressure gauge , vibration elimination pads, dry run protection etc. complete with base and frame, nuts,anchors and bolts. The pump should be rated at the premium efficiency rating of IE 2. The pump inclosure to be minimum IP 55 rated and insulation class to be F. The vender shall submit performance curve, GA drawing and technical data sheet to the consultant prior to installation. The pump shall be capable to work with a negative suction of upto 5 mtr. without any lag in the efficiency. The pump set assembly should haver CE and TUV approvalThe pump shall be assembled for Twin headed (Commom suction and discharge head) circulation pump and shall include the cost of Stainers, NRVand Valves etc and all other accessories required for the proper completion of the work as desired on the as required complete in all respects as per direction of Engineer-in-charge.The pump shall work in (W +S) mode as per details given below:-The pump shall be installed on suitable RCC foundations and with anti-vibration pads complete as per requirement and as per instructionsThe pumps shall work in cyclic operation with auto switching feature after every 4 hours and in the event of failure of any pump the other pump shall automatically start operationPUMPS ARE TO BE INSTALLED IN PUMP ROOMS AS INDICATED IN THE DRGS |
| 1094 | PUMP With 10 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant)Lazy River & Wave PoolNo of Pumps :-3 (2 w + 1s)Water flow rate 120 cb mtr/hr @ 14 m Head |
| 1095 | PUMP With 5.5 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant)Water Play StationNo of Pumps :-3 (2 w + 1s)Water flow rate 80 cb mtr/hr @ 12 m Head |
| 1096 | PUMP With 3 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant)Tower D & Toddlers Fun AreaNo of Pumps :- 2 (1 w + 1s)Water flow rate 33 cb mtr/hr @ 12 m Head |
| 1097 | PUMP With 4.5 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant)Tower CNo of Pumps :- 2 (1 w + 1s)Water flow rate 55 cb mtr/hr @ 14 m Head |
| 1098 | PUMP With 1.5 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant)Tower ANo of Pumps :- 2 (1 w + 1s)Water flow rate 15 cub mtr/hr @ 14 m Head |
| 1099 | Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 2000 mm Dia capaSupply, Installation, testing and commissioning of of the Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 2000 mm Dia capa below mentioned detailed specifications, complete with Frontal Pipe work comprising of 140 NB butterfly valves for Filter, Rinse, Backwash, Recirculate , By pass and Close functions.Vessel Make : Pentair , USA/ Aquapac, Australia/Haywards, USAl Make : PENTAIR as required complete in all respects as per direction of Engineer-in-charge. |
| 1100 | Wave pool & Lazy RiverBobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 2000 mm Dia capable to cater a flow rate of 124m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity |
| 1101 | Water Play StationBobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 1600 mm Dia capable to cater a flow rate of 80m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity |
| 1102 | Tower D &Toddlers Fun AreaBobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 960 mm Dia capable to cater a flow rate of 32m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity |
| 1103 | Tower CBobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 1200 mm Dia capable to cater a flow rate of 55m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity |
| 1104 | Tower A Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 650 mm Dia capable to cater a flow rate of 15m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity |
| 1105 | Chemical Dosing systemSupply, Installation, testing and commissioning of Chemical Dosing System complete with Electronic Dosing Pump, Injection Pipes For Disinfection, Coagulation, and pH Correction @ 0-10 LPH with manual Agitator & HDPE Solution Tanks as required complete in all respects as per direction of Engineer-in-charge. (Make : Aqua, Italy/ Seko/Nuton, USA or equivalent as approved by engineer / Consultant or equivalent) |
| 1106 | Filter MediaSupply, Installation, testing and commissioning of Multi-grade Filter Media Comprising of Silica and Gravel with Granulometry in-between 0.2mm to 06 mm.as required complete in all respects as per direction of Engineer-in-charge.(Make : as approved by engineer / Consultant or equivalent) |
| 1107 | Floor Inlet Nozzles-diffusor typeSupply, Installation, testing and commissioning of Floor Inlet Nozzles-diffusor type (And Vaccum Points) Made of ABS capable to cater a flow rate of 7m3/hras required complete in all respects as per direction of Engineer-in-charge.Make : Pentair, USA/Astral Spain (30 Nozzles+ 05 Vaccum Point) or equivalent as approved by engineer / Consultant or equivalent |
| 1108 | Cleaning SetSupply, Installation, testing and commissioning of Cleaning Set Comprising of Anodised Alluminium Vaccum Head, Vaccum Hose 30 mtrs Length , Deep Bag net, Flat net, Curved Brush, Straight Brush, Algae Brush and Telescopic Pole as required complete in all respects as per direction of Engineer-in-charge.Make : as approved by engineer / Consultant or equvalent |
| 1109 | Supply, Installation, testing and commissioning of Modular Overflow Grating made in UV stabilised of 295 mm Width , suitable for reversible curves. as required complete in all respects as per direction of Engineer-in-charge. |
| 1110 | UV SterilizersSupply, Installation, testing and commissioning of UV sterilizer in SS-316L housing, with built-in ballast to ensure a smooth power supply, 35% more UV-C yield as a result of reflection by the interior. Flow 60 m3/hr, maximum pressure 2 Bar. 130W, 220V AC, 50 Hz. complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager. (Make : Pentair, USA/Astral Spain (30 Nozzles+ 05 Vaccum Point) or equivalent as approved by engineer / Consultant) |
| 1111 | Wide Throat Skimmer Box Supply, Installation, testing and commissioning of Wide Throat Skimmer Box For Suction of Water. as required complete in all respects as per direction of Engineer-in-charge. |
| 1112 | STEAM AND SAUNA BATH / FILTRATION AND LIGHTING IN SWIMMING POOL STEAM AND SAUNA BATH- WELLNESS CENTERSupply, installation, testing & Commissioning of Steam generator (Make: Eurostan or equivalent)• Temperature Sensor • Temperature Controller • Electronic Timer KW: 15 Specifications: • Powder coated GI shell. • Stainless steel (304 grade) water reservoir. • Heating elements are made from stainless steel (304 grade) for long life & high output. • High density PUF insulation. • Thermo fuse protected heating elements. • Stainless steel fuse protected heating elements. • Low water level cut-off to ensure heater safety. • Built – in water filter. • Safety pressure release valve. • Flexible hose connector for water feeding. • Ergonomic soft touch switches. • Illuminated controls. • LCD display.as required complete in all respects as per direction of Engineer-in-charge. |
| 1113 | Supply, installation, testing & Commissioning of Steam room false ceiling: Aluminum composite panel false ceiling with powder coated aluminum channels Area: 7’ X 7.5’ (52.5 Sq. ft.) @ Rs.700.00complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager . |
| 1114 | Supply, installation, testing & Commissioning of Steam room door: Frameless 10mm toughened, frosted glass on hinges, handle, water & magnetic seal. Area: 7’ X 2.5’ = 17.5 sq. ft. @ Rs.1100.00 complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager . |
| 1115 | Supply, installation, testing & Commissioning of Steam room vapor proof wall light complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager . |
| 1116 | Supply, installation, testing & Commissioning of Sauna Bath: (3280mm X 2060mm) Specifications. • 96mm X 12mm Thickness Tongue & Groove Grade “A” Spruce wood Interior walls, ceiling and flooring. Make: Finland. • Glass Wool insulation • Finish Series Heater with Lava Rocks. • Pre – Assembled Benches made of 1” X 4” Spruce wood. • Trim For Corners and Ceiling. • Standard Pre – Hung Sauna Door with 12” X 42” Hermetically Sealed, Tempered Safety Glass and Hardware. • Heater Guard. • Vapor proof Wall Light Fixture. • Head rests. • Magazine Stand. Area: 7’ X 9’ Height 7’ (350 sq. ft.) 350 sq. ft. @ Rs.1100.00 complete in all respect as per specification and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1117 | Supply, installation, testing & Commissioning of Accessories Kit: Make: (Eurostan) • Wooden bucket with liner. • Ladle. • Thermometer. • Hygrometer. • Sand timer. • Sauna stone (Lava Stones) complete in all respect as per specification and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1118 | Supply, installation, testing & Commissioning of Heater: 9 K.W. • Temperature Sensor • Temperature Controller • Electronic Timer complete in all respect as per specification and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1119 | SECURITY / RODENT REPELLENT SYSTEM & LED CABINETP4 Out Door LEDSupply, installation, testing & Commissioning of P4 Outdoor LED Cabinet : 576 x 576 / 960 x960 - Outdoor LED Screen - All Weather Proof- Nation Star Lamp 2121 - Diecast & Iron Cabinet,LED Unipole Structure LED Structure - 10 ft Pole & 6ft x 4 ft Screen Space - With Beutifi cation and ACP Clading Including foundation and base fabrication ,cloud controller TV2 for LED screen and all accessories. complete in all respect as per specification and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1120 | SECURITY SYSTEM Supply, installation, testing & Commissioning of Electromechnical Boom Barrier with maxium boom length of 6 mtrs, speed of 4 seconds and 100% duty cycle complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager |
| 1121 | Supply, installation, testing & Commissioning of 3D under vehicle scanning system UVSS along with ANPR and driver cemera as per Drawing /specification .complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1122 | Supply, installation, testing & Commissioning of Hand held metal detector. as per Drawing /specification .complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1123 | Supply, installation, testing & Commissioning of X-Ray Baggage Scanning system Dual View complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1124 | Supply, installation, testing & Commissioning of Door frame metal detector 32 zone provides uniform detection and precise pinpointing. independent zone indicator lights on both sides panels identify not only height but also left , center and right locations for one or more objects passing through the archway . as per Drawing /specification .complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1125 | Supply, installation, testing & Commissioning of Traffic Cones of 4.5 Kg complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1126 | RODENT REPELLENT SYSTEMSupplying and Rodent Bait Station (SS Sheet 304 Grade) Standard size complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager . |
| 1127 | SITC of composting machine of organic waste system of 50KG per day, Machine Size (L x W x H) in meter : 2.35 x 0.93 x 1.68, Power : 8 HP, Waste Treatment Capacity : Up to 50 kg/day, All Wetted Parts : Stainless Steel SS 304, Operation : Fully Automatic., Volume Reduction : Up to 80-90%., Shredder : Built-in, Power requirement Three phase 415 V, 63 A connections with earthing and neutral, as per technical specification including civil works of required shed and foundation base (Smartenviro/Excel/Tanco or equivalent or as per the direction of site engineer including all leads and lifts. |
| 1128 | Supplying 12.5 m high motorized High Mast Lighting System comprising continuously tapered 12-sided polygonal hot-dip galvanized steel mast manufactured from high tensile steel conforming to BS EN 10025 S355/ASTM A572 Grade 50, complete with base plate, head frame, lantern carriage suitable for 6 luminaires, double drum winch, motorized raising/lowering mechanism, stainless steel wire rope, lightning finial, aviation light bracket, weatherproof junction box, trailing cable, plugs & sockets, canopy and all accessories, complete as required and as directed by the Engineer-in-Charge. |
| 1129 | Supplying, installing, testing and commissioning (SITC) 300 W LED Flood Light, IP66, die-cast aluminium housing, luminaire efficacy ≥120 lm/W, PF ≥0.95, THD ≤10%, surge protection ≥10 kV, complete with driver and mounting accessories, as required and as directed by the Engineer-in-Charge. |
| 1130 | Supplying, installing, testing and commissioning (SITC) of outdoor High Mast Control Panel fabricated from CRCA sheet with 32 A TPN MCCB incomer, motor control circuit, contactors, timer, selector switches, indicating lamps, MCBs, internal wiring and all accessories, complete as required and as directed by the Engineer-in-Charge. |
| 1131 | Constructing RCC foundation in M25 grade concrete including excavation, PCC, reinforcement, shuttering, anchor bolts, foundation template, backfilling, disposal of surplus earth, complete foundation design based on safe bearing capacity of soil, complete as required and as directed by the Engineer-in-Charge. |
| 1132 | Erection, alignment, installation, wiring, testing and commissioning of 12.5 m High Mast Lighting System including mounting of lantern carriage and LED flood lights using suitable lifting equipment, complete as required and as directed by the Engineer-in-Charge. |
| 1133 | Providing and laying GI Pipe Earthing with 40 mm dia., 2.5 m long GI pipe electrode including 25 × 3 mm GI strip, earth pit chamber with CI cover, watering arrangement, testing and connection to High Mast (2 Nos. per mast), complete as required and as directed by the Engineer-in-Charge. |
| 1134 | Provisional sumThe comparison of bid shall be done exclusive of provisional sum. The cost shall include cost of Environmental testing. (Fixed by the employer for INR 4,67,208, not to be quoted by the bidder.)Unit 1 Per Job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 28 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender