Tender For Construction Of Community Hall Near Lohar Market Dharam, Panchayat Dharam A, Block Gundi Dharam Under Head Abdpnit No:- 21.2 Of Rew Ramban 2026-27
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
19800
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramban → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Hall Near Lohar Market Dharam, Panchayat Dharam A, Block Gundi Dharam Under Head Abdpnit No:- 21.2 Of Rew Ramban 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils. |
| 2 | Ordinary Rock |
| 3 | Providing and laying in position stone soling in horizontal position including cost of stones complete |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). |
| 5 | Providing and laying in position Reinforced cement concrete in beams, cantilevers, suspended floors, roofs etc. etc. all work above plinth upto floor V level of specified grade including curing but excluding the cost of centring and shuttering in 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Steel Reinforcement for RCC work including cutting, bending, binding and placing in position all complete (TMT bars of Fe500 Grade) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 30% boulders |
| 8 | Providing and laying in position stone Boulders of small size including all etc. complete |
| 9 | Brickworkwith common burnt clay bricks of class designation 75 in cement moratr 1:6 (1 cement: 6 coarse sand) in foundation and plinth |
| 10 | Extra for Brickworkwith common burnt clay bricks of class designation 75 in cement moratr 1:6 (1 cement: 6 coarse sand) above plinth |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for:foundations ,footings etc. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for:suspended floors, roofs etc. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for:Lintels, beams etc. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work for:Edges of Slabs etc |
| 15 | 6mm thick cement plaster of mix 1:3 (1 cement: 3 fine sand) |
| 16 | 12mm thick cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 17 | Filling of excavated earth and boulders inside the plinth with all lead s and lifts along with compactionand rammering all complete. |
| 18 | Colour washing such as green blue or buff to give an even shade on new work with two or more coats with a base coat of white washing with lime |
| 19 | Wood work in frames of doors, windows, ventilators and other frames wrought framed and fixed in position with hold fasts of Imported wood |
| 20 | Providing/fixing of Panelled or Panelled & glazed shutters 35mm thick for doors, windows, celestory windows using with 4mm thick glass panes and ISI marked MS pressed butt hinges complete with screws (Imported wood) |
| 21 | Providing/fixing of Wire Guage shutters 35mm thick for doors, windows, celestory windows using standard size of mesh and ISI marked MS pressed butt hinges complete with screws (Imported wood) |
| 22 | Providing/fixing of MS Grill of required pattern in frames of windows etc. with MS flats sqaure or round bars with a priming of approved steel primer all complete |
| 23 | Painting with Synthetic enemal paint of approved brand and manufacture two or more coats. |
| 24 | Making Plinth protection 50mm thick of cement concrete 1:3:6 (1cement:3Sand:6graded stone aggregates) with 20mm nominal size aggregates over 75mm thick boulders along with all compaction and rammering complete |
| 25 | Providing/Fixing of aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to requird colour or shade with nuts and scews complete (250x16mm)(L-Drop) |
| 26 | Tower Bolts |
| 27 | Handles |
| 28 | Providing/Fixing of Glass panes with putty and glazing clips in steel doors, windows all complete with 4mm thick glass panes |
| 29 | 40mm Cement concrete Flooring of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 30 | Providing and fixing of electrification with complete wiring and switches of standard quality as per the site Engineer |
| 31 | Ceiling Fans |
| 32 | Carriage of Steel/Cement from source to site by mechanical transport or animal transport or by head load |
| 33 | Carriage of Sand from source to site by mechanical transport or animal transport or by head load |
| 34 | Carriage of Aggregates from source to site by mechanical transport or animal transport or by head load |
| 35 | Carriage of Stones from source to site by mechanical transport or animal transport or by head load |
| 36 | Carriage of Bricks from source to site by mechanical transport or animal transport or by head load |
| 37 | Providing/Fixing of Citizen information board (complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender