Tender For repair maintenance Specialized Electrical & Mechanical Services At Tis Hazari Court Complex, Delhi. (Sh: Servicing & Repairing Of Existing 2500A Air Circuit Breaker & Allied Accessories, Replacement Of Faulty Mccbs & Changeover Switch.)
Tender Value
5.83 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
5 days left
EMD
11674
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenance Specialized Electrical & Mechanical Services At Tis Hazari Court Complex, Delhi. (Sh: Servicing & Repairing Of Existing 2500A Air Circuit Breaker & Allied Accessories, Replacement Of Faulty Mccbs & Changeover Switch.)
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of LT Air Circuit Breaker (ACB) 2500A by providing and replacing defective accessories such as Pole Assembly (2500A), Jaw Contact (2500A), Cradle Terminal (2500A) and Moving Contact (2500A), including dismantling of defective parts, cleaning, servicing, alignment, fitting, re-assembly, tightening of all connections with suitable hardware, lubrication wherever required, testing, commissioning and making all electrical connections etc. complete as required. |
| 2 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 3 | a) 400 A, 35 KA,TPMCCB |
| 4 | b) 630 A, 50 KA,TPMCCB |
| 5 | Supplying, laying & fixing of following size XLPE / PVC insulated PVC sheathed Alum. cond. armoured cable of 1.1 KV grade on surface/in ground etc. complete as reqd. |
| 6 | a) 3.5 x 150 sq. mm (On Surface) |
| 7 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 8 | a) 3½ X 150 sq. mm (50mm) |
| 9 | Supply, Installation, Testing and Commissioning of 100 Amps, 415V, 50Hz, 4 Pole Manual Changeover Switch, suitable for LT distribution system, complete with the following:On-load changeover with I–0–II (Source Selector) operationSuitable for switching between two power sources High short-circuit withstand capacity as per system fault levelSheet steel enclosure with dust and vermin proof construction, Proper interlocking mechanism to prevent simultaneous closing of both sources, Clearly visible ON/OFF and source indication, Suitable busbar / terminal arrangement for 100A rating, etc. complete as required i/c credit for old dismantle material under buy back. |
| 10 | Supplying, Installation, Testing and Commissioning of direct online Submersible pump starter suitable for 10.0 HP, Overload Relay Range (A) 13.2-20 Amp, 3 phase power supply in sheet steel enclosure having safety devices i.e. main on off switch, HRC fuses, SPP water level controller, Temp. Controller, Moisture Sencer, Auto Manual switch, TP contactor, Over Voltage Relay, ammeter/ voltmeter etc. in existing panel/ wall with the help of desh fastener i/c connection testing etc. as required. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level:a) 1:4:8 (1 Cement : 4 Coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 12 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. |
| 13 | a) Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 14 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 15 | a) 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 16 | Dismantling, Disconnection and Credit buy back old dismantle materials |
| 17 | a) Old/Rusted/Damaged Contact, assembly, terminals etc. |
| 18 | b) Old/Rusted/Damaged MCCB's etc. |
| 19 | c) Old/Rusted/Damaged Change over switch etc. |
| 20 | d) Old/Rusted/Damaged Starter etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender