Tender For annual repair & maintenance of To 310 Da Staff Qtrs. At Karkardooma, Delhi Dg. 2026-27. (Sh: Providing And Fixing Sanitary Fittings, Wire Mesh Doors In Type-Ii Qtrs. No. 63 To 78 And Other Miscellaneous Civil Works).
Tender Value
13.82 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
3 days left
EMD
27652
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of To 310 Da Staff Qtrs. At Karkardooma, Delhi Dg. 2026-27. (Sh: Providing And Fixing Sanitary Fittings, Wire Mesh Doors In Type-Ii Qtrs. No. 63 To 78 And Other Miscellaneous Civil Works).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 2 | 35 mm thick shutters |
| 3 | with ISI marked M.S. pressed butt hinges bright finished of required size |
| 4 | Kiln seasoned and chemically treated hollock wood |
| 5 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 6 | 25 mm dia (heavy type) |
| 7 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: |
| 8 | 250x10 mm |
| 9 | 150x10 mm |
| 10 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. |
| 11 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 12 | 125 mm |
| 13 | 100 mm |
| 14 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 15 | Single rubber stopper |
| 16 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 17 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 18 | W.C. pan with ISI marked white solid plastic seat and lid |
| 19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 20 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 21 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 22 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 23 | Semi rigid pipe |
| 24 | 40 mm dia |
| 25 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 26 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 27 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 28 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 30 | 25 mm nominal dia Pipes |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 32 | 20 mm nominal dia Pipes |
| 33 | Providing and fixing brass bib cock of approved quality : |
| 34 | 15 mm nominal bore |
| 35 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 36 | 45 cm length |
| 37 | 15 mm nominal bore |
| 38 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 39 | 100 mm diameter |
| 40 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 41 | 15 mm nominal bore |
| 42 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 43 | 15 mm nominal bore |
| 44 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 45 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 46 | Providing and fixing PTMT grating of approved quality and colour. |
| 47 | Circular type |
| 48 | 100 mm nominal dia |
| 49 | 125 mm nominal dia with 25 mm waste hole |
| 50 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 51 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 52 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 53 | 30 mm thick |
| 54 | Providing and fixing CPVC tank nipple for water tank pipe. Fittings of approved quality, colour and make including all fittings etc. all complete as per direction of Engineer-in-charge. |
| 55 | 25mm nominal bore |
| 56 | Making holes in Brick/RCC wall with power driven drill machine to depth of wall upto 300 including all T & P and screws etc. all complete as per direction of Engineer-in-charge. |
| 57 | Upto 300mm depth including 32mm dia |
| 58 | Providing and fixing CPVC ball valve of approved brand, colour and make including all fittings etc. all complete as per direction of Engineer-in-charge. |
| 59 | 25mm nominal bore |
| 60 | Disconnecting overhead PVC water storage tank of any size and making holes for new connection including all T & P and accessories etc. all complete as per direction of Engineer-in-charge. |
| 61 | Providing and fixing CPVC Union for water tank pipe, fittings of approved quality, colour and make etc. all complete as per direction of Engineer-in-charge. |
| 62 | 25mm nominal bore, weight not less than 40gms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender