Tender For Provision Of Ug Ht Cable For Technical Area Hansa And Provision Of Destratification Fan At P-47 At Chicolna, Goa Under Ge (I) Cg Goa
Tender Value
34.20 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
15 days left
EMD
68400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Ug Ht Cable For Technical Area Hansa And Provision Of Destratification Fan At P-47 At Chicolna, Goa Under Ge (I) Cg Goa
BOQ
| Sl. No. | Item Description |
| 1 | Supply, laying in trenches/ duct of HT under ground XLPE insulated screened PVC bedded galvanized steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor suitable for 11 KV grade (Earthed) cross sectional area 120 sqmm, 3 core complete all as specified and as directed. |
| 2 | Excavation in trenches not exceeding 1.5 m deep and not exceeding 1.5 m wide and getting out in Hard/ dence soil/ soft disintegrated rock/ laterite rock including PCC cable cover complete all as specified and as directed. |
| 3 | Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any strata complete all as specified and as directed. |
| 4 | Removing excavated soil to a distance not exceeding 50m, depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 5 | Supply and lay riddle sand in trenches for cable protection complete all as specified and as directed.Note: Punned thickness only will be measured & Paid. |
| 6 | Supply and laying un re-inforced precast concrete cable cover, class HV type-I, flat size 300mm x 180mm x 50mm in trenches over and across the cable complete all as specified and as directed. |
| 7 | Material and labour for factory made precast cement concrete cable route Indicator made out of cement concrete 1:2:4 type B1, using (20mm graded stone aggregate) of size 900x400x60MM casted as per direction and grouted into PCC 1:2:4, type B1, 35CM below ground level as per site requirment including embossed with \\"HT 11000 V/ LT 1100 V Cable\\" and also painting in synthetic enamel paint and necessary excavation and earthing work in any type of soil complete all as specified and as directed. |
| 8 | Material and labour for cable jointing kit for 11 KV (earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core 11 KV UG aluminium conductor armoured XLPE cable of size 120 sq mm 3 core complete all as specified and as directed |
| 9 | Material and labour for cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core 11 KV UG aluminium conductor armoured XLPE cable of size 120 sq mm 3 core complete all as specified and as directed |
| 10 | Material and labour for cable jointing kit for 11 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core 11 KV UG aluminium conductor armoured XLPE cable of size 120 sq mm 3 core complete all as specified and as directed |
| 11 | Supply and fix GI pipe light grade 80mm dia with all fittings and laid in trenches etc. complete all as specified and as directed. |
| 12 | Material and labour for Earthing complete with using GI earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using galvanised iron strip 32x6 mm dia as earthing lead moulded and retrieved to earth plate at one end and connected to main switch / control board at another end with and including 80 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provision of PCC 1:2:4 type B-1 (Using 20 mm graded stone aggregate) duly reinforced with mild steel round bar 8 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessary excavation and earth work including laying the pipe concealed in floor / wall all as per plate No.5 of SSR Part-I, testing on completion including taking down existing earthing completeall as specified and as directedNote: If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt. |
| 13 | Taking down old unservisible existing HT UG Cable from trench/ duct including existing cable route indicator, and GI pipe wherever available at site etc complete all as specified and as directed |
| 14 | Material and labour for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn through and including non metallic rigid PVC conduit (medium quality) not less than 25mm dia and conduit accessories concealed in wall/ floor/ ceiling, provision of factory made branded galvanised steel pressed terminal box (Modular metal flush box with cover plate) 3mm thick of suitable module with white cover plate of same module with frame for housing the modular switches, sockets, fan regulators etc. including 1.5 Sqmm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire connecting to common earth dolly etc. complete all as specified and directed for the following :- |
| 15 | One socket point 2/3 pin, 5/6 Amp on Independent board complete all as specified and as directed. |
| 16 | Supply and fix Supreme Plus Air circulator wall Fan 450 mm sweep made out of MS metal Body of high Performance with smooth oscillation, 100% Copper Motor with speed control and 230 V single phase fixed with suitable size Gl bolts, nuts and washers duly grouted and connecting up with 0.75 Sq.mm size 3 core PVC insulated flexible cable with multistranded copper conductor from ceiling rose to connector of exhaust fan complete all as specified and as directed. |
| 17 | Supply and fix modular switch 1 way 6A, 1 module complete all as specified and as directed. |
| 18 | Supply and fix modular socket 6A -2/3 pin combined 2 module complete all as specified and as directed. |
| 19 | Supply and fix modular switch 1 way 16A, 1 module complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender