Tender For Repairment/ Renovation Of Auditorium Of Bhss Nagam.
Tender Value
29.24 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
7 days left
EMD
58480
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairment/ Renovation Of Auditorium Of Bhss Nagam.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 2 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 3 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 4 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of G.S. Sheet |
| 5 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
| 6 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 7 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 8 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 9 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: |
| 10 | 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks) |
| 11 | Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building. With resin bonded fiber glass wool with density 24 kg/cum |
| 12 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 13 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat |
| 14 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 15 | Providing, supplying, installation, testing and commissioning of complete LED Panel Light point comprising 2' x 2' (600 x 600 mm) recessed LED panel light of 36 W with CRCA powder-coated housing, high-transmittance diffuser, high-efficiency SMD LEDs, electronic constant current isolated driver, minimum efficacy 120 lm/W, minimum luminous flux 4320 lumens, input voltage 140-270 V AC, PF ≥ 0.95, THD ≤ 10%, CRI ≥ 80, CCT 4000 K, IP20, LED life L70 ≥ 50,000 hours, BIS approved and LM-79 & LM-80 tested, complete with 6A modular one-way switch, 6A modular 3-pin socket, modular plate, Gl flush box, point wiring with 1.5 sq.mm FRLS copper conductor PVC insulated wires for phase, neutral and earth drawn through 20 mm dia heavy-duty PVC conduit (recessed/surface), all junction boxes, connectors, saddles, fixing hardware, terminations, earthing continuity, cutting/chasing, making good damages, testing and commissioning complete in all respects as required at site complete job |
| 16 | Providing, supplying, installation, testing and commissioning of heating power point wired with 3 × 4 sq.mm FRLS copper cable in heavy-duty PVC conduit complete with 16A modular swit ch, 16A modular socket, flush GI box, 20A SP MCB in DB, all accessories, termination, testing and commissioning complete in all respects. |
| 17 | Providing, supplying, installation, testing and commissioning of computer power point wired with 3 × 2.5 sq.mm FRLS copper cable in heavy-duty PVC conduit complete with two numbers 6A modular switches, two numbers 6A modular sockets, flush GI box, 10A SP MCB in DB, all accessories, termination, testing and commissioning complete. |
| 18 | Providing, supplying, installation, testing and commissioning of ceiling fan point complete comprising 1200 mm sweep energy-efficient ceiling fan with aerodynamically balanced aluminium blades, double ball bearing motor, power consumption not exceeding 35 W (BEE 5-Star rated), suitable for 230 V AC, 50 Hz supply, complete with down rod, canopy, shackle assembly, safety wire, all fixing accessories and electronic step fan regulator (dimmer), including point wiring with 1.5 sq.mm FRLS PVC insulated copper conductor wires (phase, neutral and earth) drawn through 20 mm dia heavy-duty PVC conduit (recessed/surface), modular 6A one-way switch, modular electronic fan regulator, modular plate, GI flush box, junction boxes, connectors, saddles, terminations, earthing continuity, cutting/chasing, making good damages, testing and commissioning complete in all respects as required at site.all complete |
| 19 | Providing, supplying, laying, testing and commissioning of service connection from energy meter to Main Distribution Board using 2 × 10 sq.mm + 1 × 6 sq.mm FRLS copper cable in heavy-duty PVC conduit including saddles, clamps, glands, lugs, terminations and all accessories complete. |
| 20 | \\"Providing and laying of Laminated Wooden Flooring of approved make and shade, having a minimum thickness of 12mm with AC4 abrasion resistance rating, conforming to IS standards. with the preparation of the base subfloor, ensuring it is perfectly levelled, clean, and dry. Including laying of 3mm thick foam Incl. all necessary matching wooden profiles such as skirtings ,T-mouldings, reducer strips, end-caps, wastage, labour, tools, and equipment necessary to complete the work in all respects as per the drawings and instructions of the Engineer-in-Charge. |
| 21 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 22 | Providing and fixing of (30 mm thick) wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender