Housing Urban and Rular Development Government Departments Closing in 1 days TDR #56930382

Short Dated Tender - Tender For Various Civil Work In Qtr No M-14 Under Sub Dn Gandhi Nagar I Jaipur. (Sanction Work)

Issued by Government Departments · Jaipur, Rajasthan
Tender Value
3.61 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
1 days left
EMD
7220
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Short Dated Tender - Tender For Various Civil Work In Qtr No M-14 Under Sub Dn Gandhi Nagar I Jaipur. (Sanction Work)- 1 Dismantling Stone Slab/ Terrazo Chip Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 2 P & F 1St Qualityvitrified Porcelain Polished Tiles On Floor, Skirting And Steps Etc.In Different Sizes (Thickness To Be Specified By Manufactuer) With Water Absorption Less Than 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1 : 4 Including Grounting The Joints With White Cement And Matching Pigment Etc Complete. Size 600 Mm X 600 Mm 3 Providing And Fixing Of Double Leaf Steel Shutter For Cupboard, The Frame Is Made Of Pressed Steel Isi Section 80X25 Mmx 1.25 Mm Thick With 1.00 Mm Ms Sheet To Spot Welded Including Holdfasts Of 15X3Mm, Ms Oxidized Fittings Such As Butt Hinges, Sliding Doors Bolts, Handles, Tower Bolts And Twin Peg Etc Complete Including Applying Priming Coat Of Approved Steel Primer Of Red Oxide Zinc Chromate And Spray Painting In Approved Shade With Deco Paint Of Approved Quality Complete As Per Direction Of Engineer In Charge 4 Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12Mm (Av.) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Rajasthan Black Above 3601 Cm2 Slabs, 15-18Mm Thick 5 Rough Chisel Dressed Sand Stone 35 Mm Thick Flooring Of Approved Shade Set Over 20Mm Thick Base Of Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) And Pointing With Cement Sand Mortar 1:3 With Pigment To Match The Shade Of Stone With Joint Thickness Up To 15 Mm Complete In All Respects : Red Sand Stone (Karauli Stone) 6 Half Brick Masonry In Foundation & Plinth Using Bricks Of Designation 75 Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 7 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : 20Mm Thick. 8 Providing And Fixing Marble Stone Flooring Table Rubbed, 15-18 Mm Thick Over 20Mm (Av.) Thick Base Of Cm 1:4 (1 Cement : 4 Coarse Sand) Jointing With White Cement Mortar 1:2 (1 White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Or Providing And Fixing Stone Slabs Table Rubbed, 15-20 Mm Thick In Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills Etc. Laid On 12Mm (Av.) Thick Base Of Cm 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs, 15-18Mm Thick 9 Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar. 10 P & F Kitchen & Lab. Sink Of Approved Make With C.I. Brackets Duly Painted, 40 Mm C.P. Waste Coupling, C.P. Brass Chain With Rubber Plug, 40 Mm G.I. Waste Pipe Up-To Floor Level Complete Including Cutting And Making Good The Wall & Floor : 1.0 Mm Thick Stainless Steel Aisi -304 & Is 13983-1994 Kitchen Sink Of Approved Make As Per Engineer-In-Charge With Large Waste Coupling. 24 X 18 X 8 Overall Size 20X16X8 Bowl Size (Inches) 11 Providing And Fixing Steel Glazed Doors Windows And Ventilator Shutters Of Standard Rolled Steel Section (Is 1038-1983) Joints Mitred And Welded With Steel Lugs 13X3Mm, 10Cm. Long Embedded In Cement Concretee Block 15X10X10Cm. Of 1:3:6 (1Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws With Fixing Clips Or With Bolts And Nuts As Required Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Cooper Glazing Clips And Special Metal Sash Putty Of Approved Make Or Metal Beading With Screws Complete Including Priming Coat Of Approval Steel Primer, Excluding The Cost Of Metal Beading And Other Fitting Except Necessary Hinges Of Pivots Steel Handles Peg Stay Etc. As Required : Windows Side Hung /Ventilators Top Or Centre Hung (Openable) 12 Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3Mm With Suitable Screw At Not Exceeding 150Mm 13 Providing And Fixing Square Bars Or Other Flat Welded To Window, Ventilatiors Etc. 14 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete Old Plastered Surface (Two Or More Coats) 15 Removing Dry Or Oil Bound Distemper By Scrapping Sand Papering And Preparing Surface Smooth Including Necessary Repairs To Scratches By Sandla/Loi And All Scaffolding (For Colour Changing Only) 16 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: Old Work (One Or More Coats ) 17 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : One Or More Coats On Old Work. 18 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead :With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand) 19 Providing And Fixing Superior Quality Cp Brass Fittings Of Approved Make As Per Direction Of Engineer-In-Charge Wall Mixer 3 In 1 System With Provision Of Tetephonic Bath Shower With Bend Pipe 20 P & F European Type White Glazed Vitreous China 1St Quality W.C Pan (Is : 2556 Mark) With P Or S Trap Including Cutting And Making Good The Wall And Floor 21 P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall : Size 550 Mm X 400 Mm 22 Providing And Fixing Superior Quality Cp Brass Fittings Of Approved Make As Per Direction Of Engineer-In-Charge Angular Stop Cock With Long Thread 15 Mm Nominal Size 23 P & F 15 Mm. Dia Connection Pipe Of Approved Quality/Make : (-Do-) 600Mm. 24 P & F Bib Cock (Is : 8931 Mark), Superior Quality Of Approved Make: C.P. Brass Bib Cock,15Mm Nominal Bore. 25 Providing And Fixing Superior Quality Cp Brass Fittings Of Approved Make As Per Direction Of Engineer-In-Charge Swan Neck Pillar Cock 15 Mm Nominal Size 26 P & F Premium Quality Low Level Flushing Cistern Of 10 Litres Capacity (Is:2556 Mark) Of Approved Make As Per Engineer-In-Charge With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball, (Is:1703 Mark) Complete Including Cutting And Making Good The Wall : 27 P & F Premiumquality Water Closet Seat Covers With Brass Hinges Complete Solid Pvc (Isi Marked) Grade-I White For Ewc. 28 P & F Sink Cocks Of Superior Quality & Approved Made : (-Do-) Casted Spout 15 Mm. 29 Labour Charges For Removing W.C. Pan (Any Type) Of All Sizes With Care Including All Necessary Fittings P Or S Trap. 30 P& F Waste Pipe With All Fitting P.V.C With C.P Nut 32 Mm 31 P & F Grating Of Approved Quality/Make: Stainless Steel Sheet Size 125Mm Dia. Heavy Quality Of Approved Make 32 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix 1: 3: 6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). 33 Providing And Fixing 1St Quality Standard White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 & Is :15622 Of Size 200Mm X 300Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Pillar). 34 Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300Mm Confirming To Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). 35 Extra For Using Size Above 200X300Mm In Glazed Tiles And For Using 400Mm X 400Mm Mat Finished Tiles In Place Of 300Mm X 300Mm Size. 36 P & F Ball Cock (Is :1703 Mark) With Rod & P.V.C. Ball Complete : Brass Wt. Not Less Than 300 Gm,15Mm. 37 P & F Pvc Storage Tank Isi Marked (Is : 12701) Indicating The Bis License No), Of Approved Make With Cover, 25Mm Dia 1M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc., Complete Of Approved Design: 500 (-Do-) 38 P & F Full-Way Valve (Is:778 Mark) Or Wheel Valve Of Approved Make : (-Do-) 20Mm Nominal Bore. 39 Providing And Fixing Superior Quality Cp Brass Fittings Of Approved Make As Per Direction Of Engineer-In-Charge Two Way Bib Cock 15 Mm Nominal Size 40 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,) 20Mm Nominal Outer Dia Pipes 41 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,) 15 Mm Nominal Outer Dia Pipes 42 P & F Square-Mouth Gully Trap `A` Grade (Is 651-1992 :Marked) Of Approved Make Complete With C.I. Grating, Frame & Cover Masonary Chamber In C.M. 1:6, 100Mm Thick C.C. 1:5:10 Base Concrete, 40Mm Thick C.C.M-15 Grade Coping, 12Mm Thick Cement Plaster In Cm 1:3 Complete As Per Approved Design & Type. Trap Size 225 X 150 Mm, Ferrow Cement Cover With Frame Internal Chamber Size 450 X 450Mm. 43 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia 44 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Coupler (Socket) 110Mm Dia 45 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 87.5 110Mm Dia 46 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Pipe Clip 110Mm Dia 47 Construction Of Chamber In All Type Of Soil With 300 Mm Thick Masonry In Cm 1:6 M,10 Cm Thick C.C. 1:5:10 In Foundation, 20Mm Thick Insider Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade C.C. Flooring , Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr. -Do- Size 450 X 450Mm Depth Upto 0.5 M Cement Cover With Frame 48 Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Racking Of Joints Etc. Complete Fine Finish : 20Mm Thick . 49 Providing & Fixing Of Ward Robe Shutters Made Out Of 19Mm Thick Bwp Block Board Isi Of Superior Quality Make With Following Details :- Front Side Finishing With 1Mm Thick Superior Quality Mica Approved Make And 0.8Mm Thick Approved Shade Mica In The Inner Side. Covering With Teak Wood Beading 25X12Mm All The Sides Of Shutter & 35X12Mm On Outer Frame For Making Good The Wall Joint Including Heavy Brass S.S. Fittings (Handle 200Mm 2 Nos., Tower Bolt 150Mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75X40X2.5 Mm 6 Nos., Ss Hanger Rod 20Mm Dia) Complete As Per Drawing And Design Approved By Engineer In Charge. 50 Providing & Fixing Bwr Isi Marked 19 Mm Board Of Approved Make For Making Wardrobe/Shelves And Other Furniture With Fevicol & Nails Complete As Per Approved By Engineer In Charge. 51 Providing & Fixing Commercial Ply As Per Is 710 : 1976 Bwr Of Approved Make For Making Wardrobe/Shelves And Other Furniture With Fevicol & Nails Complete As Per Approved By Engineer In Charge. 12 Mm Thick 52 Providing & Fixing Mica Of Approved Make For Inner/Outer Side Of Shutters With Fevicol & Nails Complete As Per Approved By Engineer In Charge. 0.8Mm Thick Mica 53 Providing And Fixing S.S. Rod 30Mm Dia (304 Grade ,16Swg) Including Brackets Fixed With C.P. Brass Screws And Rawl Plugs, Etc., Wherever Necessary Complete Two Side Central All Fittings. 54 Providing And Fixing Wood Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled And Glazed Shutter 25 Mm To 40 Mm Thick 5 Mm Float Glass 55 Providing And Fixing Fully Panelled/Partly Panelled/ Double Leaf Shutter Frame For Doors As Per Approved Design And Drawings With Approved Ordinary C.P./ Oxidised Steel Fittings As Per Annexure - A And Width Of Styles & Top Rails Of 100Mm And Lock Rails Width Of 150Mm And Bottom Rails Of 200Mm Width Including Teak Wood Beading Of Size 19Mm X 12Mm On Both Faces Complete : 35 Mm Thick Ivory Coast Wood Grade I 56 Providing And Fixing Wood Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled And Glazed Shutter 25 Mm To 40 Mm Thick Ss Wire Gauge 14 Mesh X 24 Gauge 57 Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure A : 30 Mm Thick . Commercial Veneer Both Side 58 Extra For Providing External Lipping With 2Nd Class Teak Wood Battens 6 Mm Minimum Depth On All Edges Of Shutters (Over All Area Of Door Shutter To Be Measured) Over Item No. 8.13. 59 Labour Charges For Repair To Door / Window Without Using Any Material Such As Applying Randha (Finishing) Tightening Of Bolts & Screw Etc. 60 Repair Of Door, Window Shutters Including Cost Of Material And Labour For Change Of Damaged : Stopper Of Aluminium With Double Rubber Gutka

BOQ

Name of Work:- Various Civil work in Qtr No M-14 Under Sub dn Gandhi Nagar I Jaipur. (sanction work)
Sl. No. Item Description
1Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
2P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm
3Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge
4Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Rajasthan Black Above 3601 Cm2 Slabs, 15-18mm thick
5Rough Chisel dressed Sand stone 35 mm thick flooring of approved shade set over 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointing with cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects : Red sand stone (Karauli stone)
6Half brick masonry in foundation & plinth using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand)
7Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.
8Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. OR Providing and fixing stone slabs table rubbed, 15-20 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs, 15-18mm thick
9Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.
10P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : 1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling. 24 x 18 x 8 Overall size 20x16x8 Bowl size (inches)
11Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concretee block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Windows side hung /Ventilators top or centre hung (openable)
12Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm
13Providing and fixing Square bars or other flat welded to window, ventilatiors etc.
14Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats)
15Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only)
16Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Old work (One or more coats )
17Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work.
18Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead :With cement mortar 1 :4 ( 1 cement : 4 coarse sand)
19Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe
20P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor
21P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 550 mm x 400 mm
22Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Angular stop cock with long thread 15 mm nominal size
23P & F 15 mm. Dia Connection Pipe of approved quality/make : (-do-) 600mm.
24P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominal bore.
25Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Swan neck pillar cock 15 mm nominal size
26P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall :
27P & F Premiumquality water closet Seat Covers with brass hinges complete Solid PVC (ISI marked) grade-I White for EWC.
28P & F Sink Cocks of superior quality & approved made : (-do-) Casted Spout 15 mm.
29Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap.
30P& F waste Pipe with all fitting P.V.C with C.P nut 32 mm
31P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make
32Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
33Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
34Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
35Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.
36P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. Not less than 300 gm,15mm.
37P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-)
38P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : (-do-) 20mm nominal bore.
39Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Two way Bib Cock 15 mm nominal size
40Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mm nominal outer dia pipes
41Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal outer dia pipes
42P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 225 X 150 mm, ferrow cement cover with frame Internal Chamber size 450 X 450mm.
43P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia
44P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket) 110mm dia
45P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 110mm dia
46P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Pipe Clip 110mm dia
47Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto 0.5 M Cement cover with frame
48Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick .
49Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make with following details :- Front side finishing with 1mm thick superior quality mica approved make and 0.8mm thick approved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS Hanger Rod 20mm dia) complete as per drawing and design approved by Engineer in Charge.
50Providing & Fixing BWR ISI marked 19 mm board of approved make for making wardrobe/shelves and other furniture with fevicol & nails complete as per approved by engineer in charge.
51Providing & Fixing Commercial Ply as per IS 710 : 1976 BWR of approved make for making wardrobe/shelves and other furniture with fevicol & nails complete as per approved by engineer in charge. 12 mm thick
52Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica
53Providing and fixing S.S. Rod 30mm dia (304 grade ,16SWG) including brackets fixed with C.P. brass screws and rawl plugs, etc., wherever necessary complete two side central all fittings.
54Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick 5 mm float glass
55Providing and fixing fully panelled/partly panelled/ double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - 'A' and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete : 35 mm thick Ivory coast wood grade I
56Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick SS wire gauge 14 mesh x 24 gauge
57Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick . Commercial Veneer both side
58Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13.
59Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc.
60Repair of door, window shutters including cost of material and labour for change of damaged : Stopper of Aluminium with Double Rubber Gutka
61Repair of door, window shutters including cost of material and labour for change of damaged : Steel Hinges For Stone Chowkhat ,4\\"size
62Repair of door, window shutters including cost of material and labour for change of damaged : Mild Steel Tower Bolt 6\\" long
63Repair of door, window shutters including cost of material and labour for change of damaged : Steel Handle 6\\" size
64Repair of door, window shutters including cost of material and labour for change of damaged : Steel Locking Bolt
65Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56930382
AUTHORITY Government Departments
TENDER VALUE 3.61 Lakhs
LAST DATE 12-08-2026
Authority
Authority Name Public Works Department
Work Description Short Dated Tender - Tender For Various Civil Work In Qtr No M-14 Under Sub Dn Gandhi Nagar I Jaipur. (Sanction Work)- 1 Dismantling Stone Slab/ Terrazo Chip Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 2 P & F 1St Qualityvitrified Porcelain Polished Tiles On Floor, Skirting And Steps Etc.In Different Sizes (Thickness To Be Specified By Manufactuer) With Water Absorption Less Than 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1 : 4 Including Grounting The Joints With White Cement And Matching Pigment Etc Complete. Size 600 Mm X 600 Mm 3 Providing And Fixing Of Double Leaf Steel Shutter For Cupboard, The Frame Is Made Of Pressed Steel Isi Section 80X25 Mmx 1.25 Mm Thick With 1.00 Mm Ms Sheet To Spot Welded Including Holdfasts Of 15X3Mm, Ms Oxidized Fittings Such As Butt Hinges, Sliding Doors Bolts, Handles, Tower Bolts And Twin Peg Etc Complete Including Applying Priming Coat Of Approved Steel Primer Of Red Oxide Zinc Chromate And Spray Painting In Approved Shade With Deco Paint Of Approved Quality Complete As Per Direction Of Engineer In Charge 4 Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12Mm (Av.) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Rajasthan Black Above 3601 Cm2 Slabs, 15-18Mm Thick 5 Rough Chisel Dressed Sand Stone 35 Mm Thick Flooring Of Approved Shade Set Over 20Mm Thick Base Of Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) And Pointing With Cement Sand Mortar 1:3 With Pigment To Match The Shade Of Stone With Joint Thickness Up To 15 Mm Complete In All Respects : Red Sand Stone (Karauli Stone) 6 Half Brick Masonry In Foundation & Plinth Using Bricks Of Designation 75 Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 7 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : 20Mm Thick. 8 Providing And Fixing Marble Stone Flooring Table Rubbed, 15-18 Mm Thick Over 20Mm (Av.) Thick Base Of Cm 1:4 (1 Cement : 4 Coarse Sand) Jointing With White Cement Mortar 1:2 (1 White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Or Providing And Fixing Stone Slabs Table Rubbed, 15-20 Mm Thick In Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills Etc. Laid On 12Mm (Av.) Thick Base Of Cm 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs, 15-18Mm Thick 9 Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar. 10 P & F Kitchen & Lab. Sink Of Approved Make With C.I. Brackets Duly Painted, 40 Mm C.P. Waste Coupling, C.P. Brass Chain With Rubber Plug, 40 Mm G.I. Waste Pipe Up-To Floor Level Complete Including Cutting And Making Good The Wall & Floor : 1.0 Mm Thick Stainless Steel Aisi -304 & Is 13983-1994 Kitchen Sink Of Approved Make As Per Engineer-In-Charge With Large Waste Coupling. 24 X 18 X 8 Overall Size 20X16X8 Bowl Size (Inches) 11 Providing And Fixing Steel Glazed Doors Windows And Ventilator Shutters Of Standard Rolled Steel Section (Is 1038-1983) Joints Mitred And Welded With Steel Lugs 13X3Mm, 10Cm. Long Embedded In Cement Concretee Block 15X10X10Cm. Of 1:3:6 (1Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws With Fixing Clips Or With Bolts And Nuts As Required Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Cooper Glazing Clips And Special Metal Sash Putty Of Approved Make Or Metal Beading With Screws Complete Including Priming Coat Of Approval Steel Primer, Excluding The Cost Of Metal Beading And Other Fitting Except Necessary Hinges Of Pivots Steel Handles Peg Stay Etc. As Required : Windows Side Hung /Ventilators Top Or Centre Hung (Openable) 12 Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3Mm With Suitable Screw At Not Exceeding 150Mm 13 Providing And Fixing Square Bars Or Other Flat Welded To Window, Ventilatiors Etc. 14 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete Old Plastered Surface (Two Or More Coats) 15 Removing Dry Or Oil Bound Distemper By Scrapping Sand Papering And Preparing Surface Smooth Including Necessary Repairs To Scratches By Sandla/Loi And All Scaffolding (For Colour Changing Only) 16 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: Old Work (One Or More Coats ) 17 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : One Or More Coats On Old Work. 18 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead :With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand) 19 Providing And Fixing Superior Quality Cp Brass Fittings Of Approved Make As Per Direction Of Engineer-In-Charge Wall Mixer 3 In 1 System With Provision Of Tetephonic Bath Shower With Bend Pipe 20 P & F European Type White Glazed Vitreous China 1St Quality W.C Pan (Is : 2556 Mark) With P Or S Trap Including Cutting And Making Good The Wall And Floor 21 P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall : Size 550 Mm X 400 Mm 22 Providing And Fixing Superior Quality Cp Brass Fittings Of Approved Make As Per Direction Of Engineer-In-Charge Angular Stop Cock With Long Thread 15 Mm Nominal Size 23 P & F 15 Mm. Dia Connection Pipe Of Approved Quality/Make : (-Do-) 600Mm. 24 P & F Bib Cock (Is : 8931 Mark), Superior Quality Of Approved Make: C.P. Brass Bib Cock,15Mm Nominal Bore. 25 Providing And Fixing Superior Quality Cp Brass Fittings Of Approved Make As Per Direction Of Engineer-In-Charge Swan Neck Pillar Cock 15 Mm Nominal Size 26 P & F Premium Quality Low Level Flushing Cistern Of 10 Litres Capacity (Is:2556 Mark) Of Approved Make As Per Engineer-In-Charge With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball, (Is:1703 Mark) Complete Including Cutting And Making Good The Wall : 27 P & F Premiumquality Water Closet Seat Covers With Brass Hinges Complete Solid Pvc (Isi Marked) Grade-I White For Ewc. 28 P & F Sink Cocks Of Superior Quality & Approved Made : (-Do-) Casted Spout 15 Mm. 29 Labour Charges For Removing W.C. Pan (Any Type) Of All Sizes With Care Including All Necessary Fittings P Or S Trap. 30 P& F Waste Pipe With All Fitting P.V.C With C.P Nut 32 Mm 31 P & F Grating Of Approved Quality/Make: Stainless Steel Sheet Size 125Mm Dia. Heavy Quality Of Approved Make 32 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix 1: 3: 6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). 33 Providing And Fixing 1St Quality Standard White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 & Is :15622 Of Size 200Mm X 300Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Pillar). 34 Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300Mm Confirming To Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). 35 Extra For Using Size Above 200X300Mm In Glazed Tiles And For Using 400Mm X 400Mm Mat Finished Tiles In Place Of 300Mm X 300Mm Size. 36 P & F Ball Cock (Is :1703 Mark) With Rod & P.V.C. Ball Complete : Brass Wt. Not Less Than 300 Gm,15Mm. 37 P & F Pvc Storage Tank Isi Marked (Is : 12701) Indicating The Bis License No), Of Approved Make With Cover, 25Mm Dia 1M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc., Complete Of Approved Design: 500 (-Do-) 38 P & F Full-Way Valve (Is:778 Mark) Or Wheel Valve Of Approved Make : (-Do-) 20Mm Nominal Bore. 39 Providing And Fixing Superior Quality Cp Brass Fittings Of Approved Make As Per Direction Of Engineer-In-Charge Two Way Bib Cock 15 Mm Nominal Size 40 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,) 20Mm Nominal Outer Dia Pipes 41 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,) 15 Mm Nominal Outer Dia Pipes 42 P & F Square-Mouth Gully Trap `A` Grade (Is 651-1992 :Marked) Of Approved Make Complete With C.I. Grating, Frame & Cover Masonary Chamber In C.M. 1:6, 100Mm Thick C.C. 1:5:10 Base Concrete, 40Mm Thick C.C.M-15 Grade Coping, 12Mm Thick Cement Plaster In Cm 1:3 Complete As Per Approved Design & Type. Trap Size 225 X 150 Mm, Ferrow Cement Cover With Frame Internal Chamber Size 450 X 450Mm. 43 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia 44 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Coupler (Socket) 110Mm Dia 45 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 87.5 110Mm Dia 46 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Pipe Clip 110Mm Dia 47 Construction Of Chamber In All Type Of Soil With 300 Mm Thick Masonry In Cm 1:6 M,10 Cm Thick C.C. 1:5:10 In Foundation, 20Mm Thick Insider Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade C.C. Flooring , Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr. -Do- Size 450 X 450Mm Depth Upto 0.5 M Cement Cover With Frame 48 Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Racking Of Joints Etc. Complete Fine Finish : 20Mm Thick . 49 Providing & Fixing Of Ward Robe Shutters Made Out Of 19Mm Thick Bwp Block Board Isi Of Superior Quality Make With Following Details :- Front Side Finishing With 1Mm Thick Superior Quality Mica Approved Make And 0.8Mm Thick Approved Shade Mica In The Inner Side. Covering With Teak Wood Beading 25X12Mm All The Sides Of Shutter & 35X12Mm On Outer Frame For Making Good The Wall Joint Including Heavy Brass S.S. Fittings (Handle 200Mm 2 Nos., Tower Bolt 150Mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75X40X2.5 Mm 6 Nos., Ss Hanger Rod 20Mm Dia) Complete As Per Drawing And Design Approved By Engineer In Charge. 50 Providing & Fixing Bwr Isi Marked 19 Mm Board Of Approved Make For Making Wardrobe/Shelves And Other Furniture With Fevicol & Nails Complete As Per Approved By Engineer In Charge. 51 Providing & Fixing Commercial Ply As Per Is 710 : 1976 Bwr Of Approved Make For Making Wardrobe/Shelves And Other Furniture With Fevicol & Nails Complete As Per Approved By Engineer In Charge. 12 Mm Thick 52 Providing & Fixing Mica Of Approved Make For Inner/Outer Side Of Shutters With Fevicol & Nails Complete As Per Approved By Engineer In Charge. 0.8Mm Thick Mica 53 Providing And Fixing S.S. Rod 30Mm Dia (304 Grade ,16Swg) Including Brackets Fixed With C.P. Brass Screws And Rawl Plugs, Etc., Wherever Necessary Complete Two Side Central All Fittings. 54 Providing And Fixing Wood Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled And Glazed Shutter 25 Mm To 40 Mm Thick 5 Mm Float Glass 55 Providing And Fixing Fully Panelled/Partly Panelled/ Double Leaf Shutter Frame For Doors As Per Approved Design And Drawings With Approved Ordinary C.P./ Oxidised Steel Fittings As Per Annexure - A And Width Of Styles & Top Rails Of 100Mm And Lock Rails Width Of 150Mm And Bottom Rails Of 200Mm Width Including Teak Wood Beading Of Size 19Mm X 12Mm On Both Faces Complete : 35 Mm Thick Ivory Coast Wood Grade I 56 Providing And Fixing Wood Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled And Glazed Shutter 25 Mm To 40 Mm Thick Ss Wire Gauge 14 Mesh X 24 Gauge 57 Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure A : 30 Mm Thick . Commercial Veneer Both Side 58 Extra For Providing External Lipping With 2Nd Class Teak Wood Battens 6 Mm Minimum Depth On All Edges Of Shutters (Over All Area Of Door Shutter To Be Measured) Over Item No. 8.13. 59 Labour Charges For Repair To Door / Window Without Using Any Material Such As Applying Randha (Finishing) Tightening Of Bolts & Screw Etc. 60 Repair Of Door, Window Shutters Including Cost Of Material And Labour For Change Of Damaged : Stopper Of Aluminium With Double Rubber Gutka
Basic Detail
Tender No NIT 21/2026-27 EE PWD CITY DN III JAIPUR
Bidding Type Tender
Location
City Jaipur
State Rajasthan
Key Dates
Publish Date 08 Aug 2026
Submission Date 12 Aug 2026
Open Date 13 Aug 2026
Finance
Tender Value 3.61 Lakhs
Tender Fee 200
EMD 7220
Exemption Available
Document List
526d3aee-c964-4e7a-8cf2-6764425698a0.html
BOQ_1038233.xls
Tendernotice_1 (32).pdf
Tendernotice_2 (4).pdf
Tendernotice_3 (2).pdf
Tender_document_21_28.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Aug 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

526d3aee-c964-4e7a-8cf2-6764425698a0.html

xls

BOQ_1038233.xls

pdf

Tendernotice_1 (32).pdf

pdf

Tendernotice_2 (4).pdf

pdf

Tendernotice_3 (2).pdf

pdf

Tender_document_21_28.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders