Tender For Repairing & Overhauling Of Three Nos Alum Agitator Along With Motor, Gearbox Assembly,Alum Recirculation Pump,Feed Pump & Renovation Of 6 Nos Outgoing Motor Feeder Of Lt Pdb With Supply, Fitting & Fixing Spares At Filter House Under Swtp,
Tender Value
4.73 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
1 days left
EMD
9800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing & Overhauling Of Three Nos Alum Agitator Along With Motor, Gearbox Assembly,Alum Recirculation Pump,Feed Pump & Renovation Of 6 Nos Outgoing Motor Feeder Of Lt Pdb With Supply, Fitting & Fixing Spares At Filter House Under Swtp, Kmda.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fabrication of new stainless steel plate/ flat (AISI - 304) of suitable size on seal beam / roller track/ slide track/ side seal seats/ top seal seat by welding (SS) as per direction of the Engineer- in-charge including cost of Materials, Machinaries, Manpower, Cutting, Aligning, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification. |
| 2 | Supply,installation,testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries, Manpower, Cutting, Machining,Aligning,Anchoring,Welding,Finishing,Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) |
| 3 | i) Base frame (MS) |
| 4 | ii) Shaft/Pin with key ways made of SS-304 |
| 5 | iii) Coupling (Mat: C45) |
| 6 | Supply of Gear Oil as per direction of Engineer in charge. |
| 7 | Supply of Grease. |
| 8 | Supply fitting Fixing of ss (AISI304) bolts,nut & washer i) dia 10 mm to 20 mm a) Length upto 75 mm. |
| 9 | Overhauling and repairing of gearbox assembly for alum agitator with supply fitting fixing of spare parts as per sample & as per direction of EIC. |
| 10 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) TEFC Squirrel cage motor : (3 phase crane duty, RPM :1000) 2 HP rating |
| 11 | Rewinding with complete servicing and heat varnishing of 415V, 3 Phase L.T. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by Dr. Beck's graded insulating varnish to obtain stable IR value, cleaning up the rotor, including heating for de-moisturisation, lacker coating on the surface of rotor stampings, cleaning and RO priming on the end shield covers, bearing housing and complete the necessary repairing works (including bearing change) of following motors. |
| 12 | 1) 3 HP rating |
| 13 | 1) 2 HP rating |
| 14 | 1) 1.5 HP rating |
| 15 | Overhauling and repairing of horizontal centrifugal pump (CI/ SS impeller) of capacity 10 to18 m3/hr. each, upto 20 meter head with supply fitting fixing of spare parts in complete all respect as per direction of EIC. |
| 16 | Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor (Make: L & /ABB/Schneider/ Simence/ GE) having contact block of the following range. 25-45 Amp |
| 17 | Supply & fixing of 230/240V, LED indicating lamp make :AE/KAPPA/IMP) Blue/ white color. |
| 18 | Supply & fixing of 230/240V, LED indicating lamp make :AE/KAPPA/IMP) other than Blue/ white color. |
| 19 | Supply and delivery of Thermal overload relays (Make: L & T/ABB/Schneider/Simence/ GE/Minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, MN2. |
| 20 | Supply of ammeter selector switch Current in Each phase with OFF, 4 Pos. 90° angle ofthrow (OFF-R-Y-B) |
| 21 | Supply and fixing of analog Ammeter ranging 0-100Amps having C.R ratio of 100/5A, 144 mm sq size (make :AE/KAPPA/IMP). |
| 22 | Supply and fixing of analog voltmeter ranging from 0-500 V of 144 mm sq size (make :AE/KAPPA/IMP). |
| 23 | Supply and delivery Modular Push button actuators (with plastic front ring),Illuminated actuator (with holder for contact block) (Make: L & T/ABB/ Schneider/Simence/ GE) Rised, colour: Red, green,blue, Amber, white, yellow, clear. |
| 24 | Supply & delivery of the following Current Transformer (Make: KAPPA/AE): Ratio 100/5A VA. |
| 25 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection 6-32 A FP MCB make:Legrand. |
| 26 | Supplying of following XLPE insulated alumiium conductor armored cables of 1.1KV grade as per IS 7098 1 (PART 1) 1988 with upto amendments 4 core 16 sqmm (Rate in Rs. Per Mtr) |
| 27 | Laying only cable upto 50 sqmm through existing RCC/Hume/GI Pipe/ open masonary trench for single, 2,3,3½ and 4 core. |
| 28 | Supply of M.S plate as per IS : 2062 -2011/Latest Revision, Make : SAIL/ TATA/JINDAL Above 2 mm upto 10 mm thickness. [ for panel work and support frame for shft assembly of gear box] |
| 29 | Supply of I.S.A as per IS:2062-2011/LatestRevision,Make:SAIL/TATA/JINDAL )Upto100x 100x differen tthickness [For support frame for shft assembly of gear box] |
| 30 | Supplying & fixing earth busbar of galvanized(HotDip)MS flat 25mmx 6mm on wall having clearance of 6mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. |
| 31 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting willbe made seperately) For Exposed Work PVC Pipes |
| 32 | i) 100 mm |
| 33 | ii) 80 mm |
| 34 | iii) 50 mm |
| 35 | Supplying, fitting and fixing gunmetal wheel valve of approved brandand make tested to 21 kg per sq. cm. (for water lines only). |
| 36 | i) 80 mm dia |
| 37 | i) 50 mm dia |
| 38 | ii) 40 mm dia |
| 39 | Welding and cutting charges for compliting the support work, pipe line base work, panel repairing work of the agitator assembly. |
| 40 | Painting of MS plate, base frame, support works, motor, gearbox, pipeline network, panel with one coat of primer grey and two coats with enemal paint. (Scraping where necessary). |
| 41 | Less scrap materials @10% on items 1-2,5-20,22-24,26 |
| 42 | Cess @ 1% |
| 43 | Added GST@ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender