Tender For maintenance Of electrical installation In Nrb At Chandigarh. (Rewinding/Repair Of Ceiling Fans/ Exhaust Fans Etc. In Sector-25 & Dhanas Under The Jurisdiction Of Sdee-8, Chandigarh.
Tender Overview
Project Description
Tender for maintenance Of electrical installation In Nrb At Chandigarh. (Rewinding/Repair Of Ceiling Fans/ Exhaust Fans Etc. In Sector-25 & Dhanas Under The Jurisdiction Of Sdee-8, Chandigarh.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Tender Extend1 | Date | 21-Aug-2026 |
| 2 | 21-Aug-2026 | Tender Extend2 | Date | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Full stator rewinding of Exhaust fan (condenser type) of 900/ 1400 RPM with new copper winding wires including cleaning and insulating the stator slots, sleeving soldering wrapping of cotton tape, varnishing re-assembling and testing etc. complete. |
| 2 | Exhaust fan 15” |
| 3 | Exhaust fan 18” |
| 4 | Replacement of ball bearing of ceiling fan including greasing, re-assembling and testing etc |
| 5 | Full stator rewinding of ceiling fan (condenser type) of 1400 mm sweep with new copper winding wires including cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape, reassembling, varnishing and testing etc. complete. |
| 6 | Full stator rewinding of ceiling fan (condenser type) of 1200 mm sweep with new copper winding wires including cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape, reassembling, varnishing and testing etc. complete. |
| 7 | Supply and erection of fan condenser (paper condenser) for ceiling fan of following rating: The condenser is to be installed in existing ceiling fan after dismantling the defective condenser including connection and testing etc. The fan condenser should be of Epcos make. |
| 8 | Condenser 3.15 µ fd. |
| 9 | Condenser 2.5 µ fd. |
| 10 | Fabrication of shaft after removing the shaft from the stator body safely and then labour work for welding and turning of the same to give the original shape from workshop and other petty material required to complete the job to the entire satisfaction of Engineer-incharge. |
| 11 | Providing split pin, check nuts hanger nuts and bolts etc including hanger if required to be replaced after removing the old. The rates includes ceiling fan erection after repair and other petty material such as screws pin, bolt nuts etc. as requirement at site. |
| 12 | Supply and erection of rubber reel after dismantling the defective real including connection and testing etc. |
| 13 | Replacement of bush bearing of any ceiling fan including turning, oiling, re-assembling and testing etc. |
| 14 | S/E of blade of ceiling fan for 1200/1400mm. The rates includes cost of all labour, carry of side, testing and commissioning etc. The ceiling fan blade should of Bajaj/ usha/ Khaitan/ MIE make to be erected after matching with the make of existing ceiling fan. |
| 15 | S/E of canopy set of 2 nos. suitable size plastic canopies for 1400mm/ 1200mm ceiling fan. |
| 16 | Repair/ replacement of BLDC PCP for 48”/56” ceiling fan, reassembling and testing etc. to complete the job to the entire satisfaction of eiC of work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayBid Submission Deadline
Online submission via eProcurement portal.
TodayBid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender