Tender For Design, Engineering, Supply, Erection Including Civil Works, Testing And Commissioning Of 11Kv Single Circuit Line On 33Kv Rail Pole Structure From Nehru Park (Loc. 4 Of Existing 11Kv Phs-Panchet Line) To Esd, Panchet, Dvc
Tender Value
1.33 Crore
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
2.26 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design, Engineering, Supply, Erection Including Civil Works, Testing And Commissioning Of 11Kv Single Circuit Line On 33Kv Rail Pole Structure From Nehru Park (Loc. 4 Of Existing 11Kv Phs-Panchet Line) To Esd, Panchet, Dvc
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Aug-2026 | ISB, CEO, CFO certificates | Other | 07-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply Part (Schedule-I) |
| 2 | Erection Part (Schedule-II) |
| 3 | Rail pole of 105 lb per yard / 120 lb per yard (12 m & above length of each rail pole suitable for above works) |
| 4 | MS Channel 100 x 50 mm |
| 5 | MS Channel 150 x 75 mm |
| 6 | MS Angle 50 x 50 x 6 mm |
| 7 | MS Angle 65 x 65 x 6 mm |
| 8 | MS Angle 75 x 75 x 6 mm |
| 9 | MS Angle 100 x 100 x 8 mm |
| 10 | 6 mm Plate |
| 11 | 8 mm Plate |
| 12 | 16 mm Plate |
| 13 | 33 KV Polymer Rigid Pin Insulator |
| 14 | 33KV 70KN Composite Long Rod Insulator (Tension type) |
| 15 | AAAC Dog (19 / 2.89 mm) Conductor |
| 16 | Pipe type Earthing Materials (Galvanised) |
| 17 | Double Tension Hardware set for AAAC Dog (19/2.89 mm) Conductor suitable for rail pole |
| 18 | Single Tension Hardware set for AAAC Dog (19/2.89 mm) Conductor suitable for rail pole |
| 19 | PG clamp for AAAC Dog (19 / 2.89 mm) conductor |
| 20 | Non Tension joint for AAAC Dog (19 / 2.89 mm) conductor |
| 21 | Danger plate |
| 22 | Number Plate |
| 23 | Phase plate (set of 3) |
| 24 | 2.0 SURVEY |
| 25 | Clearing grass and removal of the rubbish/gravel upto a distance of 50M outside the periphery of the area cleared. |
| 26 | Levelling and dressing of the ground including filling the depression with sand or moorum as may be required including supply of the materials at site,watering and ramming the fillings whenever required complete:- with sand with moorum |
| 27 | Check survey as per approved survey chart including Peg marking and preparation of as built route profile. |
| 28 | Detail survey including preliminary survey (plotting on route in toppo sheet), plotting of towers in the route profile, preparation and submission of profile drawing, line chart, tower schedule etc. RAIL POLE STRUCTURE |
| 29 | Erection of Rail Pole (105 lb / 120 lb) structure including Pit marking, excavation in all types of soil (including hard rock) upto required level, concreting with 1:2:4 mix cement concrete (over 75 mm. thick PCC of mix 1:3:6), plastering with 1:6 cement mortar and cement punning, fabrication of cross-arm, bracing, clamp including hoisting and fixing in position with packing pieces, spacers, clamps, bolts, nuts etc. and backfilling complete with all respect as per drawing, specification and direction of DVC Engineer & including supply of all materials including fish plate and storing, handling and transportation of materials at work site. (except 105 / 120 lb Rail poles, channels, angles) Single pole for S/C line - Normal Single pole for S/C line -Up to 3 meter extension Two pole Angle for S/C line - Normal Two pole Angle for S/C line -Up to 3 meter extension Four pole Angle for S/C line - Normal Four pole Angle for S/C line -Up to 3 meter extension Modification from Single pole to Two pole Angle for S/C line - (up to 3 m extension) Modification from Two pole to Four pole Angle for S/C line - (up to 3 m extension) |
| 30 | Erection & Modification of angle, channels, plates etc in Rail Pole (90 / 105 / 120 lb) structure (Excluding foundation & erection of only rail pole ), plastering with 1:6 cement mortar and cement punning, fabrication of cross-arm, bracing, clamp including hoisting and fixing in position with packing pieces, spacers, clamps, bolts, nuts etc. as per drawing, specification and direction of DVC Engineer including supply of all materials (except 90/105 / 120 lb Rail poles, channels, angles, which will be supplied by DVC free of cost) and storing, handling and transportation of materials from DVC's store (if any): Single pole for S/C line - Normal Two pole Angle for S/C line - Normal Four pole Angle for S/C line - Normal |
| 31 | Stay fixing including marking of location, excavation in all kinds of soil (including hard rock) upto the required level concreting with 1:2:4 cement concrete mix, backfilling, fabrication of clamps and fixing of stay sets, stay wires complete in all respect as per drawing, specification and direction of Engineer-in-charge including supply of all materials (size of the excavation pit 0.60 meter X 0.60 meter X 1.00 meter)(All materials are to be supplied by the contractor at his own cost) |
| 32 | Erection of Strut Pole structure including Pit marking, excavation in all types of soil (including hard rock) upto required level including concreting, Clamping etc. as per drawing and specification and as per instruction of the Engineer-in-Chrge of DVC. (All the clamps and materials except rail poles will be supplied by the contract at his own cost) |
| 33 | Painting of complete Rail pole structure with black anti-corrosive (two coats upto 2'0\\" from PL), red oxide (two coats), Alluminium paints (two coats above 2'0\\" from PL to top of Rail) including cleaning of surface and supply of all materials. Single pole for S/C line - normal + upto 6.0 meter extension Two pole Angle for S/C line - normal + upto 6.0 meter extension Four pole angle for S/C line - normal + upto 6.0 meter extension |
| 34 | Rail pole foot earthing - G.I. pipe connected with Rail pole through G.I. flats, including excavation, backfilling, levelling and cost of storing, handling & transportation of materials to site complete as per drawing, specification and directions. |
| 35 | Fixing of accessories e.g. danger plate, number plate, anticlimbing devices (barbed wire) at 3.0 meter height all around the Rail pole/poles and painting of circuit no. and location no. on Rail pole structures including supply of all materials as per drawing, specifications and direction. |
| 36 | Erection (including supply), Connection, Testing and Commissioning of new 11 KV, 400A, 3-Phase pole mounted mechanically gang operated outdoor Isolator(s) with support structure, support insulators, mechanism box, accessories, connectors etc. including supply of all materials as per drawing, specifications and direction. STRINGING |
| 37 | Laying, stringing of 3 (three) nos. conductors AAAC Dog (19 / 2.89 mm) in single circuit including hoisting of the insulator and fixing on the Rail pole structure/Tower, erection of the hardware sets, jointing of conductors, running out and pulling up of conductors and tensioning and clipping-in with the clamps/pin insulator, fixing of vibration dampers and / or preformed armour rods, erection of jumpers at section / angle location and hoisting and fixing of suspension insulator sets or pin insulator, stringing of jumper connection etc.complete in all respect as per specification and direction of Engineer-in-charge including storing, handling and transportation of all materials to site including felling down of trees as per regulation.: For stringing between rail pole to rail pole having LV, MV & HV power line crossing. For stringing between rail pole to rail pole having no LV, MV & HV power line crossing. LAYING & TERMINATION OF HT Cable |
| 38 | Laying of 11 KV, 3C X 120 mm², XLPE Al Cable including dressing, cleating, clamping of cable along the excavated earth/ cable trench/ RCC Hume pipe/ metal pipe/ structure / rail poles etc. including dewatering & cleaning as required and supplying & providing of cable tags. |
| 39 | Termination of 11 KV, 3C X 120 mm², XLPE Al Cable with outdoor heat shrinkable type cable sealing end termination kits / straight through joints CIVIL WORK |
| 40 | Earth work in excavation in foundation trenches, drains etc. including dressing of sides & ramming of bottoms, lift upto 3.0 meter, including pit marking, dewatering, getting out the excavated soil & disposal of surplus excavated soils as directed within a lead of 50 meter complete as per specifications, drawing & instruction of Engineer-in -Charge Ordinary Soil Ordinary Rock Hard Rock(Basting Prohibited) Slushy soil Hard soil mixed with gravel & moorum |
| 41 | Earthwork in filling in excavated pits, trenches, plinth & sides of foundation etc. in layers not exceeding 200 mm in depth, consolidating & dressing each deposited layer by ramming & watering, including cost of supply & carriage of materials etc. complete as per drgs.: with earth obtained from excavation of foundation ( excluding rock) |
| 42 | Earthwork in filling in excavated pits, trenches, plinth & sides of foundation etc. in layers not exceeding 200 mm in depth, consolidating & dressing each deposited layer by ramming & watering, including cost of supply & carriage of materials etc. complete as per drgs. :with sand including cost of material & transportation of material to site |
| 43 | Earthwork in filling in excavated pits, trenches, plinth & sides of foundation etc.with earth obtained from borrow pits within a lead of 500m. inclusive of excavation & carriage / haulage / transportation. (No extra claim will be entertained for earth obtained beyond a lead of 200 M) |
| 44 | Providing, supplying and laying of 20cm thick second class brick pitching (brick on edge over one brick flat pitching) on slopes of embankment canal etc. in 1:4 cement mortar in both layers, curing, preparing base to proper level of slope, with weep holes at a spacing of 1.8 meter horizontally and 0.9 meter vertically or as shown in the drawing complete (with pointing 1:3) |
| 45 | Brick work with F.P.S bricks of class designation 75 in foundation & plinth with cement mortar 1: 4 |
| 46 | One brick flat soling with bricks of class designation 5 grouted with sand including ramming & dressing bed to proper level & filling joints with sand. |
| 47 | Supplying, straightening, cutting, bending, cranking, hooking, fixing, binding & placing at any position in superstructure, fdn., & plinth with MS / Torsteel reinforcements in all works of concrete, masonry etc, including supply of binding wire with 18 SWG (1.05mm) galvanised wire twisted tight and / or welding the splices where necessary as per IS codes or direction and holding in position with steel rod spacer / chairs / horses etc. complete. |
| 48 | Charges for shoring & strutting of pits including cost of materials required for this purpose & fixing in position during excavation and/or concreting works as per specifications and directions. |
| 49 | Providing, centering and shuttering including strutting, propping etc. all complete and removal of form work in foundations, footing and bases of columns. |
| 50 | Providing, centering and shuttering including strutting, propping etc. all complete and removal of form work in columns. |
| 51 | Providing & laying in position Plain cement concrete in foundation & plinth with coarse sand & 20 mm. down stone aggregates of approved quality, well graded, washed and screened including supply of all materials, cost of transport of all materials to site, mixing, laying, vibrating, curing etc. complete but excluding centering & shuttering as per drawings, specification & direction with: Mix 1 :3 :6 Mix 1 :2 :4 |
| 52 | Providing & laying in position Reinforced Cement concrete work with coarse sand & 20 mm. & down stone aggregates of approved quality, well graded, washed and screened including cost of supply of all materials and cost of transport of all materials to site., mixing, laying, vibrating, curing etc. complete & also including erection, supporting, striking out, cleaning etc. of formwork, but excluding the cost of reinforcement as per drgs., specifications (Formworks /shuttering materials will be supplied by the contractor at his own cost) Concrete mix 1: 1.5 : 3 Concrete mix 1: 1 : 2 LAYING & TERMINATION OF HT Cable |
| 53 | Dismantling of all types of transmission line Rail poles/ steel structure/ (already erected) by cutting the rail poles exposed above the ground level with the help of welding gas along with all the fittings e.g. angles, channels, clamps etc. including the tranportation of all the dismantled materials to DVC specified stores. |
| 54 | Dismantling of 3 (three) nos. conductors AAAC Dog (19 / 2.89 mm) OR other type contractor in single circuit including removal of hardwares, insulators etc and rolling and coilling of conductor and trasportation of the dismantled conductors, hardwarres, insulators etc. in DVC's store as per instruction of the Engineer-in-charge of DVC. |
| 55 | Demolishing R.C.C work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable materials within 50m leads as per direction of Engineer-in-charge. |
| 56 | Demolishing cement concrete with 1: 3 : 6 or richer mix manually/ by mechanical means including stacking of steel bars and disposal of unserviceable materials within 50m leads as per direction of Engineer-in-charge. |
| 57 | Demolishing brick work manually/ by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50m leads as per direction of Engineer-in-charge–in of DVC.In cement mortar |
| 58 | Dismantling of steel work in built up sections in angles, steel pipes, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50m lead. MISC |
| 59 | Charges for erection of temporary scaffolding at HT< Line/Housing Area/Railway/NH Crossing points as per direction of including supply of all required materials |
| 60 | Erection of cradle guard over P&T line, road crossing and power line crossing etc. including fabrication and fixing of cradle guard cross-arm, 'I' bolt etc. including supply of all materials as required except M.S. channels and angles and including handling and transportation of materials to site as per specification, drawing, regulation and direction of the Engineer-in-charge (Cradle guard wire - 7/14 SWG). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 15 daysSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender