Tender For Provision Of Security Light In The C Us Of Sap-2 C At Korwa, Khunti.
Tender Value
26.54 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
5 days left
EMD
54000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Security Light In The C Us Of Sap-2 C At Korwa, Khunti.
BOQ
| Sl. No. | Item Description |
| 1 | Swaged steel tubular pole ( 410SP-2) of height 7 Mtr. onfirming to IS:2713 (Part II ) in three section with steel base size, bottom of the pole made of 50 mm dia MSB Clamp pipe welded to 300 mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat of read - oxide all complete as required. (Without Arm) |
| 2 | Swaged steel tubular pole ( 410SP-26) of height 9 Mtr. Confirming to IS:2713 (Part II ) in three section with steel base size, bottom of the pole made of 50 mm dia MSB Clamp pipe welded to 300 mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat of read - oxide all complete as required. (Without Arm) |
| 3 | Single Arm |
| 4 | Double Arm |
| 5 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. |
| 6 | Above 8.00 metre and upto 11.00 metre |
| 7 | Above 6.5 metre and upto 8.0 metre |
| 8 | S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required |
| 9 | a) 90W LED Campus light |
| 10 | S/F 150/160W LED Flood lgiht (on watch tower & 9 mtr pole) |
| 11 | S/F 100W LED Flood light (On building) |
| 12 | Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in existing surface / recessed steel / PVC conduit including dismantling as required |
| 13 | 3x1.5 sq mm |
| 14 | Supplying and laying of XLPE insualted PVC shehated aluminium armoured calbe working votlage upto 1100 volts as per IS:7098 (part I) of following sizes. |
| 15 | a) 2 core 10 sq mm (for pole light) |
| 16 | b) 2 core 6 sq mm (for LED flood light on building & watch tower) |
| 17 | c) 2 core 6 sq mm (for watch tower) |
| 18 | d) 2 core 10 sq mm (for watch towre) |
| 19 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm directr in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering. |
| 20 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 21 | 2 core 6/10 sq mm aluminium lugs |
| 22 | Supplying and fixing cable junction box without MCB (Make- Sintex/Hensel or euqi) |
| 23 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 24 | Earthing with G.I. earth pipe 4.5 mtr long . 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 25 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 26 | Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses, including drilling holes in metal board . making connections. etc. as required. |
| 27 | a) 32 Amps DP main swtihc |
| 28 | b) 200 Amps TP&N |
| 29 | Providing and fixing following capacity 2 pole/ 4 pole ON/OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal board, making connection, earthing the body etc. as required. |
| 30 | a) 100 Amps 4 Pole |
| 31 | Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connections, earthing the body etc. as required. |
| 32 | a) 100 Amps |
| 33 | b) 200 Amps |
| 34 | CGST @ 9% |
| 35 | SGST @ 9% |
| 36 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender