Tender For Provision Of Security Light And Gate Light In The C Us Of Police Line, Sahibganj.
Tender Value
55.94 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
6 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sahebganj → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Security Light And Gate Light In The C Us Of Police Line, Sahibganj.
BOQ
| Sl. No. | Item Description |
| 1 | S/F 7 Mtr. on firming to IS:2713 (Part II ) in three section with steel base size, bottom of the pole made of 50 mm dia MSB Clamp pipe welded to 300 mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat of read - oxide all complete as required. (Without Arm) |
| 2 | S/F 1 mtr single arm suitable for 70 mm top. |
| 3 | S/F 1 mtr double arm suitable for 70 mm.top |
| 4 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.a) Above 8.00 metre and upto 11.00 metre |
| 5 | S.I.T.C of following rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all necessary accessories as required |
| 6 | a) 90w LE.D. Campus light. |
| 7 | S/F 150 LED flood light |
| 8 | S.I.T.C of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal serylic diffuser on existing pipe including connection with 1.5sq.mm. copper conductor etc all complete as required. |
| 9 | a) 20/25W LED Post to lamp clear (For Gate light light.) |
| 10 | Supplying and laying of XLPE insulated PVC sheathed aluminium armoured cable working voltage upto 1100 volts as per IS: 7098 Ky (Part 1) of following sizes. |
| 11 | a) 2 core 10 sq mm |
| 12 | b) 4 core 16 sq mm (for service) |
| 13 | c) 4 core 10 sq mm (For LED Street light on Pole) |
| 14 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation and refilling the trench etc as reqd but excluding sand cushioning and protective covering. |
| 15 | 10 sq mm aluminium lugs |
| 16 | 16 sq mm aluminum lugs |
| 17 | Supplying and fixing cable junction box make:- Sintex / Hensel or equivalent. |
| 18 | S/F 6 to 32 Amps rating, 240 volts, \\"B\\" series, miniature circuit breaker suitable for lighting and other loads of following pole in the existing MCB DB complete with connections, testing and commissioning etc. as reqd. |
| 19 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as reqd. |
| 20 | (a) 3 x 1.5 sq mm |
| 21 | Earthing with G.I. earth pipe 4.5 mir long 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 22 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 23 | Outdoor stand mounted Feeder Panel with 63amp TP&N, MCB incomer, 63amp TP contactor automatic switching of luminaries, power tool control incommer outgoing terminal etc as reqd. (for street light) |
| 24 | S/F 32 A 3 pole fuse disconnector |
| 25 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 26 | S/F 63 A busbar |
| 27 | CGST@9% |
| 28 | SGST@9% |
| 29 | Add labour cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender