Tender For Construction Of Health Sub Center Building At Saleti, Tehsil Rakkar, District Kangra H.P. (Sh:- Construction Of Building Portion Including Water Supply And Sanitary Installation & Septic Tank).
Tender Value
29.05 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
6 days left
EMD
58100
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Health Sub Center Building At Saleti, Tehsil Rakkar, District Kangra H.P. (Sh:- Construction Of Building Portion Including Water Supply And Sanitary Installation & Septic Tank).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 2 | Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 3 | Stone filling dry hand packed tightly, under floors, complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 4 | Providing and filling brick bats/crushed stone aggregate 40mm (forty millimetre) nominal size in soak pit complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. TThe rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columnsas directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 6 | Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and depths, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetera up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 7 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 8 | Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 9 | Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 10 | Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter) with cement contents not less than 330 kg (three hundred thirty Killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in up plinth lavel and the like mass concrete complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 11 | Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter) with cement contents not less than 320 kg (three hundred Twenty Killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in all works above plinth lavel to all floor lavel etcetera and the like mass concrete complete as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. TThe rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 12 | Providing and laying mechanically mixed and vibrated reinforced cement concrete, grade M-20 (M-twenty) mix designed, so as to give a compressive strength of 20N/mm² (Twenty newton per square millimetre) with cement contents not less than 320Kg (three hundred twenty kilogrammes) per cubic meter including curing complete, excluding the cost of form work and reinforcement for reinforced cement concrete work in walls (any thickness but not less than 0.10 mtr.(Zero point one zero meter) including attached pilasters, buttresses, plinth and string courses etcetera and the like up to all floor level, and curing complete as per HPPWD specification and as directed by Engineer-in Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 13 | Providing and laying Tor steel of TATA/SAIL reinforcement thermo mechanically coated bars of grade Fe 500D for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor levels as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 14 | Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x 19cm x20 cm i/c quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) laid with cement mortar 1:6 (1 cement : 6 sand) i/c curing complete in super structure upto floor two level. as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 15 | Precast concrete block masonry in partition walls 10 cm. thick with solid block of approved size ncluding quion blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm and down gauge) in :-Cement Mortar 1:6 complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in foundation and plinth above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 17 | Providing and fixing angle iron doors, windows, clerestory windows, frame manufactured from M.S. angle iron 35x35x5mm (thirty five into thirty five into five millimeters) thickness including hinges, jamb, lock jamb, beed and if required angles thrashold of mild steel angles 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with provision for locking arrangement and shock observe as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 18 | Providing and fixing angle iron door window, clerestory window frames (double rebate) manufactured from M.S angle iron section 40x40x6mm (forty into forty into six millimeters) and M.S flat 50x6mm (fifty into six millimeters) and M.S flat of 25x6mm (twenty five into six millimeters), combined together to make one frame as per design and drawing including hinges jamb, lock jamb, beed and if required angle thrash hold of mild steel angle 50x25mm (fifty into twenty five millimeters) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 19 | Structural steel work of Tata/tiscon/Sail riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per specification, drawing, design and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 20 | Providing and fixing 0.60mm (zero point sixty millimeter) thick prepainted steel sheet ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet of TATA/durashine/ sail/ Relience/Jindal or equivalant in roofing over steel trusses with hot dip metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (TWENTY) microns over 5 (five) microns primer coating to back coat of polyster and 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( six milimeter) diameter with prepainted limpet and rubber washer complete with all accessories as required as per direction of Engineer-In-charge including carriage of material with in all lead and lift and other incidental as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 21 | Providing and fixing pre-painted steel sheet ridge (factory made) having proper Gola shape or hips of TATA Durashine / Reliance / Jindal Steel corrugation of steel sheet 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers etc. complete in all respect as per approved specifications, drawing and design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 22 | Providing and fixing valleys 90cm (Ninty centimeters) overall with 0.60mm (Zero point six zero millimeter) thick prepainted steel sheet ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet of TATAdurashine/ sail/ Relience/Jindal pre painted steel sheet in roofing (kolermetal or equivalent make) with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating+back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diametre with prepainted G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-In-charge and as per HPPWD specifications, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 23 | Providing and fixing M.S. black plain sheet 1.66mm to 2.00mm (one point six six millimeter to two point zero zero millimeters) thick in facia/eaves boards/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per HPPWD specifications or as directed by the Engineer-in-Charge, (base members of steel work shall be measured and paid for separately), including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 24 | 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 25 | 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 26 | 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering up to all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 27 | Providing and laying upto all floor level, 20mm (twenty millimeters) thick automatic hydraulically compressed and polished precast terrazzo tiles ISI marked number IS-1237 of approved brand/make and of approved shade, with marble chips of specified sizes laid in floors, treads of steps and landings, on a bed of 25mm (twenty five millimeters) average thickness of cement mortar 1:6 (one cement is to six sand) jointed with white/grey cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of medium shade as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 28 | Providing and laying upto all floor level, 20mm (twenty millimeters) thick automatic hydraulically compressed and polished precast terrazzo tiles ISI marked number IS-1237 of approved brand/make and of approved shade, with marble chips of specified sizes laid in skirting, on a bed of 25mm (twenty five millimeters) average thickness of cement mortar 1:6 (one cement is to six sand) jointed with white/grey cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of medium shade as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 29 | Providing and fixing 35mm (thirty five millimeters) thick ISI marked phenol bonded (ALPRO/Kit ply or equivalent make) flush door shutters, Number IS 2202 factory made panels ISI marked No. IS:1003 decorative type core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including black enamelled M.S. butt hinges complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. TThe rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 30 | Providing and fixing 35mm (thirty five millimeter) thick second class Deodar Wood wire gauze shutters using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of dia 0.56mm (zero point five six millimeters) for doors, windows and clerestory windows including bright finished black enamelled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 31 | Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. 250x16mm (two hundred fifty into sixteen millimeters). |
| 32 | Providing and fixing aluminum tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government.(a) 200x10mm (two hundred into ten millimeters). |
| 33 | Providing and fixing 100mm (one hundred millimeters) bright finished brass floor door stoppers with rubber cushion and necessary screws etcetera to suit shutter thickness complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 34 | Providing and fixing 150mm (one hundred fifty millimeters) oxidized M.S. single acting spring hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 35 | Providing and fixing M.S. channels Frames 75 X 40X4 mm (seventy five into forty Xfour millimetre) for doors, windows, frames manufactured from ISMC 75mmx40mm x4mm (seventy five into forty Xfour millimetre) with M.S. flat 75mm x4mm (seventy five into four millimetre) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold i/c thrashold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm (two point five millimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 36 | Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm (sixteen into three decimal one five millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeters) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints including carriage of materials within all leads, lifts and other incidental. Fixed steel windows.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 37 | Providing and fixing factory made panel 30mm thick pre laminated of Rajshri PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 38 | Providing and fixing M.S. grills (TATA/SAIL)of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer Fixed to steel windows by welding .all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 39 | Structural steel work of Tata/tiscon/Sail riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per specification, drawing, design and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 40 | Providing and fixing 8mm (eight millimeter) thick ISI marked cement bonded particle board ceiling of approved make on angle iron/T-section frame with butt jointing complete (frame work to be measured and paid for separately) as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 41 | Providing and laying double charge/ultracharge vetrified tiles of size 600x600x8mm (Six hundred into six hundred into eight millimetre) Nitco /RAK/ Kajaria/Orient & Bell/ Simpolo/ Johnson/AGL of approved shade and colour in skirting, risers of steps, dado etcetra laid on 12mm (twelve millimeter) thick cement mortar 1:3 (1cement: 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required up to all floor level complete complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 42 | Providing and fixing 20 mm thick polished Grey / china pink Granite having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for work top of labs of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 43 | Painting Steel work with premium enamel of Asian/Nerolac Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 44 | Applying painting coat with ready mixed primer of Asian/Nerolac approved shade and manufacture on wood work (hard and soft wood) complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 45 | Painting wood work with Deluxe Multi Surface Paint of required shade. Twoor more coat applied @ 0.90 ltr/10 sqm over an under coat of primer [email protected] ltr/10 sqm of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 46 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper, primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 47 | Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior) and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 48 | Providing under layer for plinth protection of 75mm(Seventy five millimeters) thick (unconsolidated) bed of dry brick/stone aggregate 40mm(Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 49 | Providing plinth protection 50mm (fifty millimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate ) 20mm (twenty millimeters) nominal size) including finishing the top surfaces of concrete smooth as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 50 | Providing and fixing on wall faces 100mm (One hundred millimeters) diameter Poly Vinyl Chloride (D-plast or equivalent) rain water pipes of working pressure not less than 4.5 Kg (four point five kilogramme) per square meter including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 51 | Providing and fixing on wall faces Poly Vinyl Chloride (D-plast or equivalent) accessories for rain water pipes including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. PVC plain bend 100mm (one hundred millimeters) dia. |
| 52 | Providing and fixing on wall faces Poly Vinyl Chloride (D-plast or equivalent) accessories for rain water pipes including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. PVC plain shoes 100mm (one hundred millimeters) dia. |
| 53 | Providing and fixing angle iron cup board frame manufactured from M.S. angle iron 25x25x5mm (twenty five into twenty five into five millimeters) thickness including hinges, jamb, lock jamb, beed and if required angle thrashold of mild steel angles 25x25mm (twenty five into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) each with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surfaces complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 54 | Constructing brick masonry chamber for under ground CI inspection chamber and bends with second class common burnt clay building brick in cement mortar 1:5 (one cement : five sand) CI cover with frame light duty 455x610mm (four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover with frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme) RCC top slab with 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), foundation concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeter) thick with cement mortar 1:3 (one cement isto three sand) finished smooth with floating coat of neat cement on walls and bed concrete, inside dimensions 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimeters) deep single pipe line complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 55 | Providing and fixing 25 mm (twenty five millimetres) dia stainless steel curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per approved shade within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 56 | Excavation in drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseleing or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 57 | Providing and laying in trenches ISI marked 20mm (twenty millimeters) nominal bore PVC (medium grade) tube fittings of approved brand and manufacture PVC Supreme/Finolex/Prince /Relpipe (reliance)/ vectus complete as per HPPWD specifications. (Earth work in trenches to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. TThe rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 58 | Providing and fixing to wall ceiling and floor ISI marked 20mm (twenty millimeters) nominal bore PVC (medium grade) tube fittings and clamps of approved brand and manufacture PVC Supreme/Finolex/Prince /Relpipe (reliance)/ vectus including making good the walls, ceiling and floor, up to all floor levels complete as per HPPWD specifications including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 59 | Providing and fixing to wall ceiling and floor ISI marked 15mm (fifteen millimeters) nominal borePVC (medium grade) tube fittings and clamps of approved brand and manufacture PVC Supreme/Finolex/Prince /Relpipe (reliance)/ vectus complete as per HPPWD specifications including making good the walls, ceiling and floor up to all floor levels and carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 60 | Providing and fixing in trenches 100mm (One hundred milimetre) diametre high pressure P.V.C.(Poly Venyl Chloride) Diplast pipe Class A soil, waste and ventilating pipes of Supreme/Kishan/Finolex/Relpipe/Vectus conforming to IS No.13592-93 (Thirteen thousand five hundred ninety two- Ninety two) fixing with adhesive mixture complete 4.6mm (Four decimal six milimetre) thick complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 61 | Providing and fixing 100mm (One hundred milimetres) diametres P.V.C Plain bend of Supreme/Finolex/Reliance including fixing with approved adhesive complete within all leads, lifts of materials and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 62 | Providing and laying ISI marked 100mm nominal diameter all socket PVC tees (medium class) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 63 | Providing and fixing ISI marked PVC spigot and socket soil, waste and ventilating pipes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, (lead caulked joints to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 64 | Providing and fixing ISI marked PVC spigot and socket soil, waste and ventilating pipes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, (lead caulked joints to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 65 | Providing and fixing 75mm (Seventy five milimetres) diametres cast iron P.V.C. holder bat clamps ISI marked of Finolex , Relpipe (Reliance ) , Vectus of approved drawing i/c/ steel screw and rawl plug etc. including entire carriage of materials within all leads lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 66 | Providing and fixing 100mm (One hundred milimetres) diametres cast iron P.V.C. holder bat clamps ISI marked of Finolex , Relpipe (Reliance ) , Vectus of approved drawing i/c/ steel screw and rawl plug etc. including entire carriage of materials within all leads lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 67 | Providing and fixing 75 mm (seventy five millimetre)P.V.C single equal branch with oval access door of Finolex / Relpipe (reliance) / Vectusinsertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 68 | Providing and fixing 75mm (Seventy five milimetres) diametres P.V.C Plain bend of Supreme/Finolex/Reliance including fixing with approved adhesive complete within all leads, lifts of materials and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 69 | Providing and fixing 100mm (One hundred milimetres) diametres P.V.C Plain bend of Supreme/Finolex/Reliance including fixing with approved adhesive complete within all leads, lifts of materials and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 70 | Providing and fixing 100mm (One hundred milimetres) diametres P.V.C.Cowl of Supreme/Finolex/Reliance including fixing with approved adhesive complete within all leads, lifts of materials and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 71 | Providing and fixing ISI marked 75mm (Seventy five milimetres) sand cast iron grating for gully/ floor or Nahni trap complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 72 | Providing and fixing HIND WARE/CERA MAKE Orissa pattern vitreous China water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimetres) ( earth work, bed concrete, foot rest and trap to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. complete as per HPPWD specifications including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 73 | Providing and fixing 110mm (One hundred ten milimetre) diametre PVC (Poly venylchloride) 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with pan and soil pipe with adhesive of approved brand as per specifications, approved drawing, design, complete as per HPPWD specifications including making good the walls, ceiling and floor up to all floor levels and carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 74 | Providing and fixing 10 (Ten) litres capacity (full flush) PTMT coloured high density polyethylene / poly propylene European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (Forty millimetre) diameter chromium plated flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 75 | Providing and fixing HIND WARE/CERA MAKE flat back 630mmx450mm (six hundred thirty millimeter into four hundred fifty millimeter)vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding the cost of fittings including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 76 | Providing and fixing ISI marked stainless steel wash basin 550x400mm diamond model code No. WB-2116 with single hole for pillar tap with C.I. or mild steel brackets painted white including cutting holes in walls and making good the same but excluding fittings complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 77 | Providing and fixing ISI marked, stainless steel kitchen sink 610x510mm (six hundred ten into five hundred ten millimeters) with bowl depth 200mm (two hundred millimete) diamond model Code No. WB-2116 complete with drain board and C.P waste with C.I or M.S brackets painted white including cutting holes and making good the wall but excluding fitting including carriage of materials with in all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 78 | Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste pipe for wash basin or sink including brass check nut complete including carriage of materials within all leads, lifts and other incidental.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 79 | Providing and fixing ISI marked, 100mm (One hundred millimeters) diameter PVC Finolex / Relpipe (reliance) / Vectusinsertion grating for gully, floor or Nahni trap complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 80 | Providing and fixing 600x450 mm beveled edge mirror of Continental series of Jaquar / classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete within all leads, lifts of materials and other incidentals.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 81 | Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 82 | Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 83 | Providing and fixing C.P. (Chromium plated) brass shower rose 150mm (One hundred fifty millimetre) diameter, with 15mm (Fifteen millimetre) or 20mm (Twenty millimetre) inlet make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera, including carriage of materials within all leads, lifts and other incidentals. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 84 | Providing and fixing (Jaguar or equivalent make) 15mm (Fifteen millimeters) diameters C.P. brass bib tap with capstan head complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 85 | Providing and fixing (Jaguar or equivalent make) 15mm (Fifteen millimeters) diameters C.P. brass Pillar tap with capstan head complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 86 | Providing and fixing (Jaguar or equivalent make) 15mm (fifteen millimeter) diameter CP brass stop cock complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 87 | Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 88 | Providing and placing 1000 liter (one thousand liter) capacity on terrace (at all floor levels) polyethylene water storage tank of Supreme ,Finolex, Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 89 | Providing and fixing 75mm (Seventy five milimetres) lead caulked joint to PVC pipes and fittings including testing of the joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 90 | Providing and fixing 100mm (One hundred milimetres) diametres lead caulked joint to PVC pipes and fittings including testing of the joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. |
| 91 | Constructing brick masonry chamber for under ground CI inspection chamber and bends with second class common burnt clay building brick in cement mortar 1:5 (one cement : five sand) CI cover with frame light duty 455x610mm (four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover with frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme) RCC top slab with 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), foundation concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeter) thick with cement mortar 1:3 (one cement isto three sand) finished smooth with floating coat of neat cement on walls and bed concrete, inside dimensions 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimeters) deep single pipe line complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, or any other taxes imposed excluding GST by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender