Tender For Providing And Fixing Of Signages And Pvc Doors At Various Locations In Apc, Replacement Of Blinds In Guest House At 6 D And Aluminum Partition In Room No. 5405 In Apc, Pgimer, Chandigarh
Tender Value
13.78 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
15 days left
EMD
27560
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Signages And Pvc Doors At Various Locations In Apc, Replacement Of Blinds In Guest House At 6 D And Aluminum Partition In Room No. 5405 In Apc, Pgimer, Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 2 | For fixed portion |
| 3 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 4 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. |
| 5 | Pre-laminated particle board with decorative lamination on both sides |
| 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 7 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 8 | Providing and fixing of wall mounted/Ceiling hung signage made up of 3 mm thick acrylic sheet with lazer cut letters in any approved colour and hung on ceiling with cain and fasteners/fixtures as per site requirement |
| 9 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20 mm x 40 mm for styles as well as top, bottom & lock rail. M.S. frame shall have a coat of steel primers of approved make and manufacture. The inside panel shall consist of 20 mm thick multi chamber hollow PVC section of 1 mm wall thickness bonded using solvent cement / Cynoacrylate adhesive with 5 mm thick (±0.5 mm ) plain PVC sheet of density 600 kg / cum manufactured by an ISO 9000 certified company, on both side of inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet batten (made by sticking 2 nos. rigid foam PVC sheet of 5 mm (±0.5 mm ) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain moulded PVC sheet of door 20 mm thick (5mm x 4 nos.) PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. S.S. butt hinges of size 100 x 25 x 2 mm & 50 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube. Other hardwares should be fixed by 25 x 8 mm size steel screws etc. complete in all respect as per direction of Engineer Incharge. |
| 10 | 30 mm thick prelaminated PVC door |
| 11 | Providing and Fixing Zebra/ Roller Blinds of Specification of Sheer Dimout Blinds of approved makes having Hardware Specification Roller Tube: Made up of High Strength Anodized Aluminium Alloy Extruded grooved tube. Size:40mm outside diameter, weight not less than 220gms/running recontrol Unit with Clutch Mechanism: The control unit is made of high strength reinforced plastic. The clutch is of warp spring design. High carbon steel springs are provided to transmit motion from the driven mechanism Clutch is operated directionally by the use of beaded endless chain to raise and lower the blind smoothly to decide height. Idler: Idler is of high strength reinforced plastic, consisting of an outside sleeve and centre shaft. Sleeve provide bearing surface for centre shaft and rotate freely, providing smooth, quiet and long wearing operation. Round Type Bottom Rail: This is made up of high Strength aluminium alloy Extruded tube, White is powder coated in white. Size not less than 14mm outside dia.; weight minimum 220gms/running mtr Triangle type Bottom Rail: This is made up of high Strength aluminium alloy Extruded tube, which is powder coated in white Size not less than 15x24x24mm; Weight minimum 230 gms/running mtr. Valance Rail: This is aluminium Extruded Rail made up of High Strength aluminium alloy, which is Powder Coated in White. Size: 84.5 mm Width; weight minimum 320gms/running mtr. Ceiling Rail: This is aluminium Extruded Rail made up of High Strength aluminium alloy, which is Powder Coated in White. Size not less 75.6X12mm; weight minimum 480gms/running mtr. Installation Bracket: It is made up of mild steel with white powder coating having minimum thickness of 1.8 mm.it is used for mounting control unit & idler. Ceiling Bracket: It is made up of mild steel with white powder coating having minimum thickness of 1.0 mm. t issued to fix the blind to the wall or ceiling. Operating chain: This is made of 4.5 mm plastic beads molded on 2.0 mm thick polyester cord. The pitch of the beads is 6mm. The chain drives the sprocket fixed in the end control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation. End Cap: End cap for triangular bottom rail, round bottom rail, Ceiling rail and valance are made up of high strength molded plastic in white colour. |
| 12 | Fabric: Technical Data, FR Grade (NFPA 701 : 2015)Composition 100% Polyester, Finished Width 280 cm, Weight minimum 112 GSM +-5% minimum Thickness 0.30 mm+5%Fabric Repeat size Soild 7.5 cm + 5 % Mesh 5 CM +5 %. (Note :- Sample/shade to be got approved from user department and E-in-C) |
| 13 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 14 | Of area 3 sq. metres and below |
| 15 | Add water charges 0.5% |
| 16 | Credit of old doors with fittings complete |
| 17 | correction factor @0.973 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender