Tender For Re Arrangement Of Existing Water Supply System To Chc Kabisuryanagar Under Deposit
Tender Value
10.32 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
3 days left
EMD
10320
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Re Arrangement Of Existing Water Supply System To Chc Kabisuryanagar Under Deposit
BOQ
| Sl. No. | Item Description |
| 1 | Shifting of pipeline inside the permises of CHCSupplying all materials, labour ,T&P and dismentling of concrete road / WBM road /Paver Road manually for taking DI/MS pipes etc. all complete including removing and depositing debris at safe distance as per direction of Engineer-in-Charge. (C.C road) |
| 2 | Supplying all materials, labour ,T&P and dismentling of concrete road / WBM road /Paver Road manually for taking DI/MS pipes etc. all complete including removing and depositing debris at safe distance as per direction of Engineer-in-Charge (WBM road) |
| 3 | Supplying all labour, material for earth work in excavation of foundation in all kinds of soil with 50 Mtr. initial lead and 1.5 mtr. lift including rough dressing and leveling the bed etc. all complete as per PW specification and direction of EIC. |
| 4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. (32mm dia CPVC pipe [In wall]) |
| 5 | 32mm dia CPVC pipe [In trench] |
| 6 | 100 x 50 x 100 mm MS flanged Tee |
| 7 | 100 mm HDPE Tailpiece |
| 8 | 100 mm MS blank Flange |
| 9 | Supplying all materials ,labour, T&P and Providing flanged joints conforming to IS:3114-1994 to flanged Cast Iron/PVC/HDPE pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per direction of Engineer - in - charge. (100mm dia flange joint) |
| 10 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete. (50mm dia Brass or Gun Metal Full Way Valve) |
| 11 | 32mm dia Brass or Gun Metal Full Way Valve |
| 12 | Fixing of UPVC Ball Cock (Horizontal plunger type) conforming to IS 1703-1977 as per specification complete. (25mm dia nominal bore brass Ball Valve teflon brass ball & spindle [High pressure/Low pressure with copper or PVC floats of the following nominal bore]) |
| 13 | Supplying all labour and T&P for jointing of existing distribution line/ rising main including the cutting the existing line & inserting Tee, Bend etc in new linewith pit cutting & refilling & concreting ,dewatering during exectionetc all complete as per direction of EIC. [pluging the existing pipelines etc] |
| 14 | Supplying all labour and T&P for barricating system at site condition such as ribbon, bamboo, sand bag etc all complete as per direction of EIC. g ,dewatering during exectionetc all complete as per direction of EIC. |
| 15 | Supplying all labour and T&P for Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour etc. all completet as directed by Engineer in charge. |
| 16 | Supplying all labour and T&P for Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .as directed by Engineer in charge. |
| 17 | Supplying all labour and T&P for CC(1:2:4)with 12mm crusher broken granite chips including cost of all labour, materials with all taxes, lead,T & P etc all complete .as directed by Engineer in charge. |
| 18 | Supplying all labour, T&P for refilling the trench with excavated earth all complete as per specification. (Net vol. of Back filling) |
| 19 | Construction of 20000 litre capacity rcc UGR(Circular) |
| 20 | Supplying all labour and T&P for earth work within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer - in - charge.60%(in all kinds of soil) |
| 21 | Supplying all labour and T&P for earth work within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer - in - charge.40%(in hard granite rock) |
| 22 | Supplying allmaterials , labour and T&P for filling sand in F & P watered and rammed etc. all complete as per specification and direction of Engineer - in - charge |
| 23 | Supplying allmaterials , labour and T&P for providing PCC ( 1:3:6 ) with 4cm size HG metal in F & P etc. all complete as per specification and direction of Engineer - in - charge |
| 24 | Supplying allmaterials , labour and T&P for providing R.C.C. ( M - 25 ) with 20mm and downgrade size hard granite chips (CB) including hoisting and laying all complete as per specification and direction of Engineer - in - charge .(Raft, Haunch,wall,Beam at roof ,Roof ) |
| 25 | Supplying all labour and T&P for cutting , bending , binding and tying ms rods and placing the grills in position including cost of steel and binding wire etc. all complete as per specification and direction of Engineer - in - charge |
| 26 | Rigid and smooth steel centering and shuttering at all heights of bridge3 work such as well curb, well steingin,well cap, pier and abutment shaft, pier and abutment cap, wing wall, tie beam, road kerb and dirt wall using required nos of vertical and horizontal supports of scaffolding with joists, N.G. rails and channels and steel shuttering plates including welding, bolting, cost, conveyance, royalty and all other taxes of all materials and cost of scaffolding gang way etc. including cost of conveyance of dismantling and disposing debris clar of work site complete to receive reinforcement grills and concrete as per requirement as directed by Engineer-in-charge.(RCC Wall upto top of Haunch level' outer' , RCC wall beyong Haunch , RCC wall at Haunch' inner' ) |
| 27 | Rigid and smooth steel centering and shuttering at all heights of bridge3 work such as well curb, well steingin,well cap, pier and abutment shaft, pier and abutment cap, wing wall, tie beam, road kerb and dirt wall using required nos of vertical and horizontal supports of scaffolding with joists, N.G. rails and channels and steel shuttering plates including welding, bolting, cost, conveyance, royalty and all other taxes of all materials and cost of scaffolding gang way etc. including cost of conveyance of dismantling and disposing debris clar of work site complete to receive reinforcement grills and concrete as per requirement as directed by Engineer-in-charge.(Beam at roof ) |
| 28 | Rigid and smooth steel centering and shuttering at all heights of bridge3 work such as well curb, well steingin,well cap, pier and abutment shaft, pier and abutment cap, wing wall, tie beam, road kerb and dirt wall using required nos of vertical and horizontal supports of scaffolding with joists, N.G. rails and channels and steel shuttering plates including welding, bolting, cost, conveyance, royalty and all other taxes of all materials and cost of scaffolding gang way etc. including cost of conveyance of dismantling and disposing debris clar of work site complete to receive reinforcement grills and concrete as per requirement as directed by Engineer-in-charge.(Roof slab , Cornice side , Deduction top of beam ) |
| 29 | pplying all labour and T&P for 6mm. thick C.P. in cement mortar (1:4) as per specification and direction of Engineer-in-charge(Outside wall , beam out side ,cornice of roof outside) |
| 30 | Supplying all labour and T&P for 12mm. thick C.P. in cement mortar (1:3) with punning for brick work as per specification and direction of Engineer-in-charge. (Inside) |
| 31 | Supplying all labour, material T&P for providing weather seal coat 2 (two ) coats with any approved paint over one coat of water bound or wall primer etc. all complete including cost of paints and primer conveyances, and royalty of all materials to site as per PW specification and direction of Engineer - in - charge (outside) |
| 32 | Supplying all labour and T&P for refilling the foundation trench with excavated earth including ramming as per direction of Engineer - in - charge (in all kinds of soil) |
| 33 | Carriage of extra earth by mechanical means to a lead within 5KM |
| 34 | Plinth Protection (Fly ash Brick work in cm ( 1:4 )) |
| 35 | Fixing Chequred Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry |
| 36 | Construction of Pumphouse |
| 37 | Supplying all labour and T&P for earth work in excavation of foundation trenches in all kinds of soil within initial lead and lift including rough dressing and leveling the bed etc. all complete as per specification and direction of Engineer-in-charge |
| 38 | Supplying allmaterials , labour and T&P for filling sand in F & P watered and rammed etc. all complete as per specification and direction of Engineer-in-charge. (Var & Room) |
| 39 | Supplying allmaterials , labour and T&P for providing PCC ( 1:4:8 ) with 4cm size HG metal in F & P etc. all complete as per specification and direction of Engineer-in-charge. (Var & Room) |
| 40 | Supplying allmaterials , labour and T&P for providing Brick masonry in c.m. (1:6) in SS with FA Bricks in F & P as per specification and direction of Engineer-in-charge. (Steps) |
| 41 | Supplying allmaterials , labour and T&P for providing Brick masonry in c.m. (1:6) in SS with FA Bricks in SStr. as per specification and direction of Engineer-in-charge |
| 42 | Supplying allmaterials , labour and T&P for providing R.C.C. ( 1 : 1½ : 3 ) with 12mm and downgrade size hard granite chips (CB) including hoisting and laying with cost of centering and shuttering as per specification and direction of Engineer-in-charge. (Plinth bend ) |
| 43 | Supplying allmaterials , labour and T&P for providing R.C.C. ( 1 : 1½ : 3 ) with 12mm and downgrade size hard granite chips (CB) including hoisting and laying with cost of centering and shuttering as per specification and direction of Engineer-in-charge. (Lintel) |
| 44 | Supplying allmaterials , labour and T&P for providing R.C.C. ( 1 : 1½ : 3 ) with 12mm and downgrade size hard granite chips (CB) including hoisting and laying with cost of centering and shuttering as per specification and direction of Engineer-in-charge. (Roof) |
| 45 | Supplying allmaterials , labour and T&P for providing R.C.C. ( 1 : 1½ : 3 ) with 12mm and downgrade size hard granite chips (CB) including hoisting and laying with cost of centering and shuttering as per specification and direction of Engineer-in-charge. (Verndah chajjas & Window chajjas) |
| 46 | Supplying all labour and T&P for cutting , bending , binding and tying ms rods and placing the grills in position including cost of steel and binding wire etc. all complete as per specification and direction of Engineer-in-charge |
| 47 | Fixing Chequred Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete. (Varandah) |
| 48 | Fixing Ceramic floor tiles of premium grade having thickness 8mm to 10 mm confirming to IS: 13756 of size 60cm x 60cm( plain Ivory ) in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete . |
| 49 | Supplying all labour and T&P for fixing tiles (glazed tile) in dados skirting and risers of steps on 12mm. thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per specification and direction of Engineer - in - charge |
| 50 | Supplying all labour and T&P for 12mm. thick C.P. in cement mortar (1:6) for brick work as per specification and direction of Engineer-in-charge. (Room Building) |
| 51 | Supplying all labour and T&P for 16mm. thick C.P. in cement mortar (1:6) for brick work as per specification and direction of Engineer-in-charge. (Room inside) |
| 52 | Supplying all labour and T&P for distempering two coats to walls as per specification and direction of Engineer-in-charge(Add Ceiling) |
| 53 | Supplying all labour, material T&P for providing weather seal coat 2 (two ) coats with any approved paint over one coat of water bound or wall primer etc. all complete including cost of paints and primer conveyances, and royalty of all materials to site as per PW specification and direction of Engineer - in - charge (Area same as outer plaster) |
| 54 | Supplying all fabrication materials, labour, T&P for fabricating, fitting and fixing MS sheet cover with angle iron frame (ISA 25 x 25 x 6mm. )for doors including a coat of primer and two coats of approved paint as per specification and direction of the Engineer-in-charge |
| 55 | Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete excluding cost of laminated board.(Door) |
| 56 | Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P excluding cost of glass etc complete as per direction of Engineer in Charge.(Window) |
| 57 | S/F of 30 watt. LED street light fitting including necessary connection.(make crompton/poly/Havells/HPL/Philips) |
| 58 | Pumping arrangements |
| 59 | Supplying all labour and T&P for Cutting metalled road for taking the pipe line through and making good to the damages including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charg |
| 60 | Supplying all labour and T&P for earth work in excavation of foundation trenches in all kinds of soil within initial lead and lift including rough dressing and leveling the bed etc. all complete as per specification and direction of Engineer - in Charge |
| 61 | Laying in trenches High Density Polyethylene Pipes conforming to IS 4984 - 1995 and specials of following outside diameter and Class-4 to Class-5 and jointing by Fusion welding method including testing as per specification complete (90mm dia High Density Polyethylene Pipes PE-63,PN 8.0) |
| 62 | Laying in trenches High Density Polyethylene Pipes conforming to IS 4984 - 1995 and specials of following outside diameter and Class-4 to Class-5 and jointing by Fusion welding method including testing as per specification complete (32mm dia High Density Polyethylene Pipes PE-63,PN 8.0) |
| 63 | Supplying all labour, T&P for providing flanged joints to pipes including testing the joints etc. all complete as per PH specification and direction of Engineer-in-charge.(90 mm dia M.S flange joint) |
| 64 | Fixing GM Valves as per specification(80mm dia GM NR Valve) |
| 65 | 80mm dia GM Full way Valve |
| 66 | Supplying all labour and T&P for refilling the pipeline trench with excavated earth watering and ramming as per specification and direction of Engineer - in Charge |
| 67 | Procurement , installation , lowering , testing and commissioning of vertical submersible pumpsets of reputed make ( KSB / CRI / TEXMO / KIRLOSKAR / CROMPTON ) of the following duty for new Production Wells ( Openwell Submersible pumpset , Head - 19m. , Q - 2.33lps ) 1HP |
| 68 | Procurement , installation , fixing on walls with testing and commissioning of Pumpset of reputed make ( BCH / SIEMENS / L & T / HAVELS ) as per specification and direction of Engineer - in - charge (single phase Panel Board to run 1HP open well Submersible) |
| 69 | Three phase Panel Board to run 5HP VS pumpset ( Relay 6.0 to 9.3 )8515/1.18x1.1615=8381.50 |
| 70 | Supplying of all labour, T&P for Installation of Pumpset including testing etc as per direction of Engineer in Charge. |
| 71 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 72 | Fitting and fixing of Main Switch 32AMP(460.00x1.1615=534.29) |
| 73 | S/F of Heat Resistant Flame Retardant HRFR PVC Insulated copper cable 4.0mm²(78.94/1.18x1.1615) |
| 74 | S/F of Heat Resistant Flame Retardant HRFR PVC Insulated copper cable 2.50mm²(53.67/1.18x1.1615=52.83) |
| 75 | S/F of Fibre Board 1' x 8\\"(270.51/1.18x1.1615=266.27) |
| 76 | S/F of Fibre Board 4\\" x 3\\"(135.25/1.18x1.1615=133.13) |
| 77 | S/F of 15AMP. Switch(162.71/1.18x1.1615=160.16) |
| 78 | S/F of 5AMP. Switch(53.90/1.18x1.1615=53.05) |
| 79 | S/F of 5AMP. Plug(67.12/1.18x1.1615=66.07) |
| 80 | S/F of Holder(33.56/1.18x1.1615=33.03) |
| 81 | S/F of High speed ceiling Fan 18\\"(1830.51/1.18x1.1615=1801.81) |
| 82 | S/F of LED Bulb 9W(180/1.18x1.1615=177.18) |
| 83 | S/F of1.50 mm² submersible flat cable |
| 84 | S/F of 4.00 mm² submersible flat cable |
| 85 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete (a)32mm ASTM pipe ( Sch. - 80) |
| 86 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete (32mm. GM FW Valve) |
| 87 | 32mm. GM NR Valve |
| 88 | 32mm. SS nipple |
| 89 | 32mm. GI Bend |
| 90 | 320mm. X 6\\"G.I. nipple |
| 91 | 32mm. GI Union |
| 92 | Steel nut bolt 3/8\\" x 4\\" long Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender