Tender For Revival, Reinforcement And Electrical Installation Of Parbatipur-Ii L.I. Project Under Jhumpura Block In Kendujhar District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Aug 2026
4 days left
EMD
8723
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival, Reinforcement And Electrical Installation Of Parbatipur-Ii L.I. Project Under Jhumpura Block In Kendujhar District.
BOQ
| Sl. No. | Item Description |
| 1 | Parbatipur-II LIP |
| 2 | Earth work excavation in foundation & plinth in hard soil within 50 mtr. Initial lead and 1.5Mtr initial lift including dressing and leveling the bed & depositing the soil with initial lead & lift as per direction of engineer-in-charge |
| 3 | Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels etc within 50m.Initial lead and 1.5m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc complete as per direction of the Engineer-in-charge. (Excavation by mechanical means 60% & manually 40%) |
| 4 | Filling in foundation plinth with sand including watering ramming etc complete as per the direction of the Engineer- incharge. |
| 5 | Cement concrete (1:4:8) with 4cm size h.g.c.b. metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement TP required etc. complete as per the direction of the Engineer-incharge. |
| 6 | Cement concrete (1:2:4) with 12mm size black h.g.c.b. chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement TP required etc complete as per the direction of the Engineer-incharge. |
| 7 | Fly Ash Brick masonry 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation plinth etc. complete as per the Engineer-incharge. |
| 8 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and TP required for the work etc complete as directed by the Engineer-incharge. |
| 9 | Rigid smooth centering shuttering for R.C.C. works including false work dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge - (a) Plinth Bend |
| 10 | R.C.C. work in C.C. (1:2:4) including hoisting laying curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and TP required for the work etc complete as directed by the Engineer-incharge. |
| 11 | M.S. reinforcement for R.C.C. work including supplying, cutting, bending, binding tying the grills placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Still Bar (FE 415/ FE 500) |
| 12 | Cement punning over plastering |
| 13 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. |
| 14 | Filling in F P with excavated materials by means of Mechanical 60% Mannually 40% |
| 15 | Painting two coats with enamel paint for priming over iron work including cost of paint labour etc complete. |
| 16 | Laying and fitting of 200 mm dia PVC Pipe |
| 17 | Laying and fitting of 200 mm dia HDPE Pipe |
| 18 | Labour charges for writting of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 19 | 100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark. (As per S/R 2022) |
| 20 | 150mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.(As per S/R 2022) |
| 21 | 100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 22 | 100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 23 | 100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including all cost, conveyance, cess etc complete but excluding cost of GST |
| 24 | 100mm dia G.I.Socket (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 25 | Cost of 200 mm dia MS Flange |
| 26 | Cost of 150 mm dia MS Flange |
| 27 | 12.5 HP star rated monoblock centrifugal pump set having 0.028 cm sec at total head of 21 mtr. capable to discharge 1700LPM with15 HP/11 KW squirrel cage induction motor fitted with companion flanges and class-\\"F\\" insulation suitable for operation 415volt +6%-15%, 3 phase ,50 Hz AC power supply and full load current with size of suction and delivery 100mm x 100mm dia with overall efficiency 60-65. The materials of construction is as given below .a)Casing -F.C-200 as per IS 210/1978. B) Impeller- Bronze grade LTB-2 of IS 318/1981. C) Shaft- High carbon steel grade 40c8 of IS 1570 (PART-2) . D) Gasket- As per IS 5120/1977. and the pump sets must be as per IS-9079/2002 of reputed brand (Lubi/ Kirloskar) having wide dealership net work for easy availability of spares. |
| 28 | Supplying of unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.4 to 1.46 gms/cc of straight length of 6 (six) meters for portable water supplies confirming to IS-4985/2000 of BIS- Amendment-2 read with Table-1 of IS-Specification bearing ISI mark for working pressure and 200 mm dia CI-I UPVC Pipe ( including cost of solvent cement) to withstand pressure of 2.5 kgf/sq.cm. as per the latest amendment of IS-4985. It includes the cost of sockets in case of plain ended pipes. The testing report is to be obtained from the CIPET, Bhubaneswar for necessary approval of authority including transportation and complete as per the direction the Engineer-in-charge. |
| 29 | Cost, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supply as per IS 4984/2016 in the following Nominal diameter, Grades of materials, Pressure rating including the rates of ex-factory, transportation, pre & post inspection, Cess etc complete but excluding the cost of GST. 200mm Ø HDPE Pipe PE 80-PN 4 |
| 30 | Cost of supplying of 160mm x160mm x 100mm dia weldless G.I. Tee (3.6 mm thichness) with bend closing and opening arrangement of reputed brand including all cost, conveyance, cess etc. complete with accessories. |
| 31 | 100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022) |
| 32 | Cost of 200 mm dia. PVC end cap. |
| 33 | Cost, Supplying of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, including all Taxes excluding cost of GST - 200 MM HDPE End cap |
| 34 | Cost, Supplying of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, including all Taxes excluding cost of GST - 200 MM HDPE Tail piece 160 mm long |
| 35 | Cost of 200mm dia. PVC coupler |
| 36 | supplying of100x100x25 G.I Tee With Plug ISI mark of reputed brand iincluding all Taxes excluding cost of GST . |
| 37 | Cost of 160mmx100 mm MS Reducer |
| 38 | Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST |
| 39 | Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red axide primer and two coats of powder coated paint of approved quality on both side (inside outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board of approved brand including all cost, conveyance, cess etc complete as per the direction of the Engineer-In-Charge but excluding cost of GST |
| 40 | 3x16 sqmm PVC inuslated (heavy duty) armoured Aluminium Tropader Cable confirming to IS-1154 Part-I/1988 including laying below 0.60 mtr. of the ground and filling the excavated materials including watering and ramming . |
| 41 | Cost, supplyuing of M.S Nuts and Bolts (1/2\\" to 5/8\\") including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022) |
| 42 | Cost of Rubber Insertion |
| 43 | Labour charges for Installation and delivery fitting including fitting of Sluice Valve, NR Valve, Air Release Valve, PVC Tee and lowering of pump and transportation etc complete. fixing suction and delivery pipe to motor, NR Valve, Foot Valve, Sluice Valve and other fitting materials including cutting, welding etc. complete as per the direction of the Engineer-incharge. |
| 44 | Cost of Misc. Welding charges for \\"Z\\" Joint, \\"S\\" bend, \\"Y\\" Joint etc. |
| 45 | Cost of cutting & threading charges of G.I Pipes |
| 46 | Cost for Electrical installation and energisation in complete shape |
| 47 | Electrical earthing with 40mm dia medium duty G.I. earthing pipe (of each 3m)with earthing installation including cost of all materials such as No 6 GI wire,G.I.flange, charcoal, salt, souldering lead etc. including transportation as required as per direction of engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender