Tender For Repair To Bridge Over Local Nallah On Dengapadar Indira Awas Rohigam Road Asset_Road_Vent Cleaning, Repairing Of Railing And Post, Revetment And Painting_Right Approach0.000 To 0.060Left Approach0.000 To 0.070
Tender Overview
Project Description
Tender for Repair To Bridge Over Local Nallah On Dengapadar Indira Awas Rohigam Road Asset_Road_Vent Cleaning, Repairing Of Railing And Post, Revetment And Painting_Right Approach0.000 To 0.060Left Approach0.000 To 0.070
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of treescut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 mtrs including removal& disposal of top organic soil not exceeding 150 mm in thickness including all labour, T&P, Cess, articles required for the work etc complete and direction of the Engineer-In-Charge. |
| 2 | Construction of embankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by machanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 & clause 305 of MOSRT & H specification including Royalty, DMF, EMF & Additional Charges charges and cost of all materials labour charges,machineries, T&P Cess etc required for the work complete as per direction of E.I.C |
| 3 | Providing & laying 75mm compacted thickness of WBM specification with following size of IRC graded metal of approved quality from approved quarry and spreading on the road surface uniformly metal to specified thickness and hand packing the voids with small stones to proper camber and grade conveying moorum from stacks stacked at work site or at approved stacking yard including labour charges of moorum spreading over the metal surface filling the interstices of metal and consolidation with three wheeled steel Roller 8 to 10 tonnes in stage of proper grade & camber & turfedging including hire and running charges of Roller and all other |
| 4 | Providing & applying primer coat with bitumen emulsion on prepared surface of granlar base including clearing of road surface and spraying @ 0.60 kg/sqm using mechanical means as per clause 502 of MoSRT&H etc. complete as per direction of the Engineer-in-Charge. |
| 5 | Providing and laying tack coat over the prepared surface of penetration grade of bitumen (60/70) after scrapping clearing the road surface with cost conveyance Royalty, DMF, EMF & Additional Charges T&P of bitumen & other all materials including hiire and running charges of Tar boiler and labour charges as required for the item of work etc complete including Cess as per specification & direction of Engineer-in-charge.Over grannular surface 3.00 Kg/10 sqm |
| 6 | Providing & laying 20mm thick premix carpet using 0.18 Cum of 13.2 mm and 0.09 cum of 11.2 mm size chips for 10sqm on road surface using 14.60 Kg. penetration grade of bitumen (80/100) for 10 Sqm over the prepared surface including hand packing to proper camber and consolidation with PRR inclusive of hire and running charges of PRR, bitumen mixtures, tar boilers and all other T&P articles and also including cost conveyance Royalty, DMF, EMF & Additional Charges & of chips and bitumen with cost of all labour charges & Cess etc complete as per specification and direction of the Engineer-in-Charge. |
| 7 | Providing and laying 6mm thick pre-coated seal coat type B using 0.06 cum of 6.7 MMsize h.b.g. chips and down graded as per sieve analysis per 10 Sqmand 6.8 Kg ofbitumen(80/100) for 10 sqm on the road surface area & rolling with PRRincluding hire and running charges of PRR and all othermachineries, cost, conveyance & Royalty, DMF, EMF & Additional Charges ofmaxphalt, 6mm size hard black granite chips with all labour, T&P and Cess required for the work etc complete as per specification & direction of Engineer-in-Charge. |
| 8 | Construction of precast RCC railing of M30 grade, aggregate size not exceeding 20 mmas per approved drawings and technical specifications. including Cost, conveyance, Royalty, DMF, EMF & Additional Charges , of all materials & labour,T&P,Cess complete as per direction of the Engineer- in - Charge. |
| 9 | Finishing wall surface with enamel paint of approved shade on old work two coat to give an even shade including cost of paint,labour,material etc .(Data for 9.30 sqm) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender