Tender For Patch Repairing Of Balurghat Ps To Bjp More (Via Dunlop More) Including Link Road From Hilli More To Subhash Corner More From Ch. 0.00 Km To 2.00 Km (Mdr) Under Dakshin Dinajpur Division, P.W.Dte. During The Year 2026-27.
Tender Value
3.60 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
0 days left
EMD
7204
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dinajpur Dakshin → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Patch Repairing Of Balurghat Ps To Bjp More (Via Dunlop More) Including Link Road From Hilli More To Subhash Corner More From Ch. 0.00 Km To 2.00 Km (Mdr) Under Dakshin Dinajpur Division, P.W.Dte. During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Repairing Pot-holes with Bituminous Macadam (Grading - II, for compacted thickness of upto 75mm)Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to bemade on the basis of the loose net volume of the stone aggregates used in the work.Material cost to be added as per Chapter A, Sl. No. 5.3 after dividing quantities of each of the materials by a factor of 1.42. For cost of tack coat refer Item No. 2 of Chapter-5 (to be added seperately) |
| 2 | Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearingcourse on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour |
| 3 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511)(Materials required per sqm:- 2.36 mm to 90 micron size @ 0.006 cum @ bitumen @ 0.68 kg) |
| 4 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).On bituminous surface @ 0.20kg- 0.3kg /sqm. |
| 5 | Add GST @18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender