Tender For Special Repair To T-23 Bldg (Potato & Onion Store) At Base Victualling Yard Under Ge Minnie Bay, Sri Vijaya Puram (8749/E8)
Tender Value
43.25 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
86500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To T-23 Bldg (Potato & Onion Store) At Base Victualling Yard Under Ge Minnie Bay, Sri Vijaya Puram (8749/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 2 | M&L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on guniting/ roof/ masonary wall surface duly mixing polymer modifier polymer modified mortar complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions. Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited |
| 3 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to deformed or twisted bars complete all as directed. |
| 4 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia, as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed. |
| 5 | M & L for non shrink, cementatious micro concrete modified with 12.5mm graded crushed stone aggregate in the ratio by weight (18kg aggregate: 25kg micro concrete) respectively as per manufacturer's instructions, as in sides and soffits of beams, jacketing of columns, roof slab and similar structural members including necessary form work for fair finished surfaces use and waste of water tight form work to facilitate pouring of micro concrete including curing with suitable curing compound complete all as per manufacturer's instructions and as directed.Note: The rate quoted shall include the cost of curing compound. |
| 6 | M&L for Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as directed. |
| 7 | Dismantling of plain or corrugated steel sheeting any gauge thickness or similar pattern roof coverings complete all as directed. |
| 8 | M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed. |
| 9 | M&L Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming (Beam, tee, angle, Channel, hollow sec or flat sections) including distance pieces, cleates, gusset paltes etc Fe 410-w grade E-250 quality A complete all as directed. |
| 10 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as directed. |
| 11 | S & F Mild steel screw bolts (machine made) of any dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as directed. |
| 12 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 290 (Gde E-165) complete all as directed. |
| 13 | S&F Mild steel 1.25mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as directed. |
| 14 | M&L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 15 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed. |
| 16 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed. |
| 17 | S&F aluminium flat 40 X 6mm size as wind tie fixed with 50mm/75mm aluminium self staging screws. |
| 18 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as directed. |
| 19 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as directed. |
| 20 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 21 | M&L PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as directed. |
| 22 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, and similar work for rough finished flat surfaces complete all as directed. |
| 23 | M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finishes surfaces square or rectangular surfaces complete all as directed. |
| 24 | M&L RCC nominal mix 1:2:4 using 20mm graded stone aggregate as in Columns , pillars, piers posts and struts complete all as directed. |
| 25 | M&L RCC nominal mix 1:2:4 using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams; bases for coloumns, etc basement slabs, under-reamed piles and mass concrete complete all as directed. |
| 26 | Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 27 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) complete all as directed. |
| 28 | M & L for rendering 15mm thick CM 1:4 on concrete or brick masonry surfaces and finishing the top surface even and fair complete all as specified and as directed. |
| 29 | M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 30 | M&L preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer all as specified & directed |
| 31 | M & L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE colour with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 32 | M & L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of company depot tinted colour with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 33 | M & L for complete removal of existing treatment on wall & finishing the surface & appliying two coat of oil bound distemper along with primer over plastered surface complete all as directed. |
| 34 | M & L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE colour with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 35 | M & L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of company depot colour tinted with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 36 | Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as directed. |
| 37 | M&L for Powder Coated Anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as directed. |
| 38 | S & F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as directed. |
| 39 | S & F only 4 mm Plain sheet glass ordinary quality, in square not exc 0.5 sqm each complete all as directed. |
| 40 | S & F only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including taking down complete all as directed. |
| 41 | M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 42 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 43 | Dismantling of tiles of any description or thickness in floor, hearth or wall including cement mortar bedding, removing debries off the premises complete all as directed. |
| 44 | Providing and laying vitrified parking tiles of sizes (600X600) of 15 mm thickness conforming to IS 15622 in all colors and shades in outdoor floors and skirting meant for parking of cars and trucks, grouting the 3 mm width joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade including filling/grouting and finishing set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as specified and directed. |
| 45 | All as per item No 44 here-in-before but in skirting/risers/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 10mm thick rendering in CM (1:4) complete all as directed. |
| 46 | M&L for coloured glazed ceramic tiles 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:4) complete all as directed. |
| 47 | M&L for hard core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled / rammed to a true surface complete all as directed. |
| 48 | M&L for PCC (1:3:6) type B-1 (20 mm graded stone aggregate) 75mm thick as in floors sub-base, plinth protection etc complete all as directed. |
| 49 | Sand filling under floors or in foundation including watering and consolidation complete all as directed. |
| 50 | Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as directed. |
| 51 | M&L for 100mm thick PCC (1:4:8) type D-2 (40 mm graded stone aggregate) as in sub-base complete all as directed. |
| 52 | M&L for 100mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in floor/hard-standing finished even and smooth without using extra cement complete all as directed. |
| 53 | M & L for providing cement concrete 1:3:6, type B1 (using 40 mm graded stone aggregate) as in surface channel and drains etc complete all as directed. |
| 54 | M & L for Cement plaster Setting coat 3mm thick, trowelled to even and smooth finish complete all as directed. |
| 55 | M & L for turbo ventilator fan propeller type to provide in alternate bays of the shed installation and fixing as specified by manufacturer instructions and making the entire assemble waterproof complete all as directed. |
| 56 | Taking down carefully existing aluminium point wiring (light, fan , socket or power) complete fittings fixture such as switches Ceiling roses, pendents,regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed. |
| 57 | M&L for taking down unserviceable submain wiring along with PVC/Steel conduits and making good disturbed surfaces of walls/floors with existing surface complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 58 | M&L for taking down unserviceable submain wiring along with PVC/Steel conduits and making good disturbed surfaces of walls/floors with existing surface complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender