Tender For Addition / Alteration Of Admin Building (P-2) At installation Chilka Under Ge Chilka
Tender Value
41.50 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
18 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration Of Admin Building (P-2) At installation Chilka Under Ge Chilka
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER CHILKA, INS CHILKA, KHURDA, ODISHA - 752 037 NAME OF WORK : ADDITION / ALTERATION OF ADMIN BUILDING (P-2) AT INS CHILKA UNDER GE CHILKA Contract No : GE/CHL/8226 OF 2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R portion workTaking down existing waterproofing tratment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100m all as specified and as directed. |
| 3 | M&L for 15mm thick cement screed or bedding layer in cement mortar 1:4 on concrete or bricks surface finished even and smooth without using extra cement to receive roof/sunken treatment, mixed with water proofing compound @2% by weight of cement over and including a neat cement slurry @ 3 Kg/Sqm over cleaned roof surface, complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately. |
| 4 | Supply only water proofing compound. |
| 5 | M&L for water proofing roof treatment, consists of a five layered Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming the surface with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each at top and bottom of the membrane as bonding material, and a coat of bituminous aluminium paint @ 100 gm/Sqm on top, including sealing all joints by thermo fusion, complete all as per manufacturer's instructions. |
| 6 | Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified. |
| 7 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames) all as specified. |
| 8 | Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. |
| 9 | M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 10 | S&F factory made 2nd class hard wood, 35 mm thickness of plain, framed, panelled shutters (two panels), with with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedto chowkats complete all as specified and as directed. |
| 11 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed |
| 12 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing as directed |
| 13 | S&F medium weight, stainless steel butt hinges of 100mm size, complete all as specified and as directed. |
| 14 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 125mm fixed complete all as specified and as directed. |
| 15 | S&F extruded aluminium alloy handles, 125mm long fabricated type, anodised all as specified and as directed. |
| 16 | S&F 250 mm long aluminium anodised, sliding door bolts, with hasp staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed. |
| 17 | S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and as directed. |
| 18 | S&F floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 19 | M&L for preparation of new painted wooden surfaces of any description not otherwise described over 10 cm width or girth of any and applying two coat of synthetic enamel paint over coat of primer of approved shade complete all as specified and directed. |
| 20 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) withextruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dashfasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 21 | S&F for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 22 | S&F powder coated of any colour (Thickness or powder coating not less than 50 micron) aluminium sliding window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and as directed. (Note : glass shall be measured seperatly.) |
| 23 | S&F 4 mm thickness of sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and as directed.Make : Hindustan Pilkinton glass works Ltd/Modiguard. |
| 24 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed |
| 25 | S&F Aluminium powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed. |
| 26 | M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 27 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall),riser of steps 10mm thick rendering in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 28 | S&F semi perforated 12mm thick micro tegular edged GRG false ciling tiles at all height with GRG (Glass fibre reinforced gypsum) false ceiliing tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%,humidity resistance of 99% , NRCO 0.50 to 0.75 as per IS 8225 : 1987 , noncombustible as per BS 476 (Part-4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides ) comprising of amin T runners of size 15x32mm of length 3000 mm , cross T of size 15x32 of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shaped level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on priphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per specification and as directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 30 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles over 15 mm thick screed in CM (1:4) complete all as specified and as directed. |
| 31 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting / dado tiles including 10 mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 32 | S&F in repairs 5 mm thick bevelled edge looking mirror of size 600x450mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 33 | S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed. |
| 34 | S&F in repair PVC floor trap with out grating including jointing with solvent cement to waste pipe 75 mm dia. |
| 35 | S&F in repairs 102mm dia grating doom of fancy chromium plated complete all as specified and directed.(Make : Prayag) |
| 36 | S&F in repairs angle valves of 15 mm dia chromium plated fancy type screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. (Make : Prayag) |
| 37 | S&F in repair water closet pedestal vitreous china white pattern (EWC) including white colour seat cover and connection to drain and to flush pipe & mild steel chromium plated or aluminised hinging device etc (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F in repairs PVC low level flushing cistern of 10 ltr capacity fixed including syphonic action type, ball valve, float and handle including brackets etc complete all as specified and directed. |
| 39 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified. |
| 40 | S&F in repair 15mm bore dia CP two way bib tap cast copper ally fancy type screwed down high pressure, with long shank screwed and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.Make : Prayag |
| 41 | S&F in repair PVC soap tray fixing with screw in the all as specified (Make : Prayag ) |
| 42 | S&F in repair CP tubular rail, 20mm dia D type 600mm long as in repair, brass chromium plated and fixed all as specified and directed by Engr-in-Charge. |
| 43 | Taking down eaves gutters and rainwater pipes (any size of pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre lineover fittings and accessories) complete all as specified and directed. |
| 44 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 110 mm bore. |
| 45 | S&F 110 bore PVC (SWR) bends any radius complete all as specified and directed. |
| 46 | Dismantling water tanks capacity exc 500 litres and n exc 1000 litres and removing to store. |
| 47 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltr capacity including provision of inlet, outlet overflow and wash out connections Complete all as specified and as directed. |
| 48 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltr capacity including provision of inlet, outlet overflow and wash out connections Complete all as specified and as directed. |
| 49 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed with necessary fittings for iron pipe size 25 mm dia/bore and fixed (Minimum weight 20mm-210 gms). |
| 50 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed with necessary fittings for iron pipe size 20 mm dia/bore and fixed (Minimum weight 20mm-210 gms) |
| 51 | S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 25 mm dia/bore complete all as specified & directed. |
| 52 | S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 20 mm dia/bore complete all as specified & directed. |
| 53 | Taking up or down 25 mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal from site of the complete all as specified and directed directed. |
| 54 | Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal from site of the complete all as specified and directed directed. |
| 55 | Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal from site of the complete all as specified and directed directed. |
| 56 | S&F 25mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 57 | S&F 20mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 58 | S&F 15mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 59 | Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 60 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed. |
| 61 | M&L Old size brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:4. |
| 62 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed. |
| 63 | M & L for RCC M-30 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beam,plinth beams and bases of columns basement slabs, and mass concrete. |
| 64 | M&L for RCC M-30 ( 20 MM graded aggregate) as in beam, cantilever,lintel over 1.5 m span. |
| 65 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 66 | Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 67 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 68 | Use and waste the Formwork to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter. |
| 69 | M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 70 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 71 | M&L for 100mm thick cement concrete 1:3:6 typeC2 using 40 mm graded stone aggregate as Sub base of flooring complete all as specified and directed |
| 72 | M&L 25mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed. |
| 73 | M&L for treating the soil under plinth protection at the rate 5 ltr of emulsion per square metre of surface area |
| 74 | M&L for treating the soil along with external perimetre of building of building at the rate of 2.25 ltr of emulsion per metre of perimeter wall. |
| 75 | Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed. |
| 76 | M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor complete all as specified and directed. |
| 77 | M & L 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection finishing even and smooth (without using extra cement) & construction joints to be given at every 3m interval and corners of buildings and filled with bituminous mastic filler complete all as specified and directed by Engr-in-Charge. |
| 78 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over cement screed 15 mm thick in CM 1:6 complete all as specified and as directed. |
| 79 | M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping including necceesry form work complete. |
| 80 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 81 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 82 | S&F welded steel wire n exc 4 Kg/Sqm fabric supplied and fixed complete to wood or steel members complete all as specified and as directed. |
| 83 | Taking down plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc. (including tiles) raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and directed. |
| 84 | M & L 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete curfaces mixed with water proofing compound 2% by weight of cement finished even and fairn and smooth without using extra cement complete all as specified and directed.Note : Water proofing compound shall be measured and paid separately. |
| 85 | M&L for rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and fair without using extra cement complete all as specified and as directed. |
| 86 | M&L 5 mm thick rendering in CM 1:3 on ceiling including finishing the surfaces even and smooth, without using extra cement etc complete all as specified and directed. |
| 87 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coat white wash complete all as specified and directed. |
| 88 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat oil bound distemper over applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth over a coat of primer complete all as specified and directed. |
| 89 | M&L for preparation of new plastered external wall with two coat of Acrylic Smooth exterior paint applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturer's instruction as per required shade by user complete all as specified and as directed. |
| 90 | M&L for complete removal of existing treatment from old decorated plastered surface of wall by vacum based sanding machine,removal of nails etc & filling cracks/hole and applying two coat oil bound distemper over applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth over a coat of primer complete all as specified and directed. as per specified and directed by manufacturer's instructions. |
| 91 | M&L for complete removal of existing treatment from old decorated plastered surface of wall by vacum based sanding machine,removal of nails etc & filling cracks/hole and with two coat of Acrylic Smooth exterior paint applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturer's instruction as per required shade by user complete all as specified and as directed. |
| 92 | M&L for complete removal of existing treatment and preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat white wash on ceiling complete all as specified and directed. |
| 93 | M & L for preparing new steel surfaces of any description over 10 cm girth and width and applying two coat of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified. |
| 94 | EM portion workTaking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed . |
| 95 | M&L for point wiring with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for (one light/Fan point) controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified.Make of wire : Finolex/KEI/HavellsMake of PVC Conduit : Polycab/Prestoplast/ Finolex |
| 96 | Description all as per item No. 94 but for one 3 pin socket outlet 5 Amps on same board. |
| 97 | Description all as per item No. 94 but for one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty. |
| 98 | Description all as per item No. 94 but for one call bell point controlled by one bell push. |
| 99 | Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLSH unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. |
| 100 | Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement. |
| 101 | M&L Sub main wiring using two runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and one run of 6.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified. Note :- Two runs of 6.0 Sqmm copper wire,one run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire:- Finolex/Polycab/HavellsMake of PVC Conduit :-Polycab/Prestoplast/ Precision |
| 102 | M&L Sub main wiring using two runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note :-Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire:- Finolex/Polycab/HavellsMake of PVC Conduit :-Polycab/Prestoplast/ Precision |
| 103 | Materials & labour for call Bell Multi Music Type , AC, 230 volt, single pole complete all as specified and as directed. |
| 104 | Supply & fixing Modular bell push, type, 6 Amps complete all as specified and as directed. |
| 105 | S&F in Ceiling rose,3 terminal PVC/poly carbonate isolated body.Make:- Anchor /Havells/Legrand. |
| 106 | Supply and fixing of Modular Fan regulator,120 watts.Make:- Anchor /Havells/Legrand. |
| 107 | Supply and fixing in including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed.Make:- Anchor /Havells/Legrand. |
| 108 | Supply and fixing in including connection of modular switch one way 16 Amps 1 Module complete all as specified and directed.Make:- Anchor /Havells/Legrand. |
| 109 | Supply & fixing in including connection modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed.Make:- Anchor /Havells/Legrand. |
| 110 | Supply & fixing in including connection modular socket outlet 2/3 pin 6/16 Amps 2 modules complete all as specified and directed.Make:- Anchor /Havells/Legrand. |
| 111 | Supply and fixing white modular cover plate with frame 2 Module complete all as specified and directed.Make:- Anchor /Havells/Legrand. |
| 112 | Supply and fixing white modular cover plate with frame 3 Module complete all as specified and directed.Make:- Anchor /Havells/Legrand. |
| 113 | Supply and fixing white modular cover plate with frame 4 Module complete all as specified and directed.Make:- Anchor /Havells/Legrand. |
| 114 | Supply and fixing white modular cover plate with frame 6 Module complete all as specified and directed.Make:- Anchor /Havells/Legrand. |
| 115 | Supply and fixing modular metal flush box 1/2 Module complete all as specified and directed. |
| 116 | Supply and fixing modular metal flush box 3 Module complete all as specified and directed. |
| 117 | Supply and fixing modular metal flush box 4 Module complete all as specified and directed. |
| 118 | Supply and fixing modular metal flush box 6 Module complete all as specified and directed. |
| 119 | Taking down old Unserviceable DB including fittings/fixtures with MCBs of any make and size all as specified and directed |
| 120 | S&F MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 12 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. Make:- Havells or /Legrand/HPL/L&T |
| 121 | S&F MCB,TPN 63 Amps rating 240, volt, 'C' series,10 kAMake:- Havells/Legrand/L & T |
| 122 | S&F MCB in SP, 6-32 Amps, 240 volt, 'C' Series, 10 kAMake:- Havells/Legrand/HPL/L&T |
| 123 | Supply and fixing TRIMLINE NEU IP20 is a high-performance LED 10 watt(2ft) batten with an extruded aluminum body for durability and heat dissipation. Its high-translucent serrated milky white diffuser ensures glare-free, uniform illumination, ideal for modern applications complete all as specified and directed. Make/Model No :- CCS-103-10-65-SL-DP-NWH (TRIMLINE NEU) of Crompton or equivalent of Phillips/Havells/Wipro. |
| 124 | Supply and fixing in of DP switch with indicater modular type-2M, 32 Amp suitable for Split/ window AC (On Off Switch) all as specified and directed.Make:- Havells (DRO White) CAT No AHOMDIW32 or equvalent to Legrand/HPL/L&T. |
| 125 | M&L Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised.Iron Wire of size 4.0 mm dia as earth lead by means of bolts, nuts, check nuts and washers at galvanised iron or steel etc, duly protected by 15 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit, testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire |
| 126 | M&L for replacement for earth continuity fixed to wall on batten or recesed or chases or buried in ground or drawn in conduit/pipe or other indicated situation for loop earthing etc as required 4mm dia GI or steel earth wire complete all as specified. |
| 127 | Taking down XLPE UG cable any size and capacity by disconnecting from DB and also from wall , roof & trench for dimolised of wall and relaying the same and connect to DB on new wall including clamping and earth work as per required complete all as per specified and directed. |
| 128 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 m sweep with, blades, and frame and louver including making hole for exhaust fan complete all as specified |
| 129 | Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old unserviceable tube light fittings all as specified and as directed. |
| 130 | Disconnecting all electrical connection and remove the copper pipe from ,indoor unit and outdoor unit form service valve carefully its original position and shifted the nearby location and install the AC after making suitable hole with drill machine and connecting to electrical lines including closing the hole with old position. |
| 131 | Supply only Eco friendly refrigerant gas like HFC (R410A/R32A) or any refrigerant gas charging any type in air conditioners,refrigerator and water cooler any make and type testing and commissioning the equipment all as specifide as direction.Make:- Freon. |
| 132 | Supply and fixing TRIMLINE NEU IP20 is a high-performance LED 20watt(4ft) batten with an extruded aluminum body for durability and heat dissipation. Its high-translucent serrated milky white diffuser ensures glare-free, uniform illumination, ideal for modern applications. complete all as specified and directed. Make/Model No :- CCS-103-20-65-SL-DP-NWH(TRIMLINE NEU) of Crompton or equivalent to Phillips/Havells/Wipro. |
| 133 | Supply and fixing round shape 12 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable tube light fittings all as specified and as directed. |
| 134 | Supply and fixing LED Bldg light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete all as specified and directed. |
| 135 | Supply & Fixing air termination Copper rod 12 mm dia, 300 mm long for lightening conductor including base plate with all necessary nut bolts and drilling job etc. |
| 136 | Supply & fix in repair for Aluminium strip 25 x 3.15mm on wall/ roof/ batten or recessed or buried in ground including all insulators, screw, nut bolts with saddles and fixing for roof conductor and down conductor complete all as directed by Engineer-in-Charge. |
| 137 | M&L in replacement of test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos. 8 mm dia, 25mm long hex. head screw. |
| 138 | Material & Labour in replacement steel water tubing light grade with all fittings & fixtures in short lenghts fixed to wall/laid in trenches for drawing lightning earth strip/ air termination rod by welding all as specified and as directed including fixing arrangements of size 40 mm bore all as specified and as directed. |
| 139 | M&L in replacement for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground with top edge of the plate not less than 1.5 mtrs below normal gound level and connected to earth test point by means of galvanised MS strip 25 x 4 mm as earthing lead all as specified and shown in electric plate No 3 of MES SSR Part-I 2020 including earthwork, PCC chamber, CI cover, protection and watering pipe, funnel, mesh etc all as required at site and all as directed.Note :-(i) 7.5 RM GI strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately.(ii) Earth resistance of earth pit should be less than 0.5 Ohms. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.(iii) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of Copper plate. |
| 140 | Supply & fixing High intensity Aviation obstruction lamp with 302 nos LEDs suitable for input 240V Protection : IP65, complete to with stand wind velocity of 8 Mtrs per Sec complete all as specified and directed. |
| 141 | M&L in replacement Sub main wiring for aviation light using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 1.5 Sqmm and one run of 1.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note:- Two runs of 1.5 Sqmm copper wire,one run of 1.5 Sqmm wire & one run PVC Conduit shall be measured as one unit. |
| 142 | M&L for cutting/boring of PCC / road cutting / hard standing at a depth not more than 30 cm deep & 20 cm in breath and making good disturbed surfaces as it was existing by using the same new materials on cutting areas/ disturbed surfaces complete. |
| 143 | Taking up or down 25 mm dia steel tubing connections, including cleaning for re-fixing or removal to store. |
| 144 | Taking up or down 50 mm dia steel tubing connections, including cleaning for re-fixing or removal to store. |
| 145 | Refixing old steel tubing 25 mm and connections in new or old position (Walls, ceiling,floors, etc.) |
| 146 | Refixing old steel tubing 50 mm and connections in new or old position (Walls, ceiling,floors, etc.) |
| 147 | Supply and Laying GI water tubing ISI marked medium grade of 50mm bore follwong sizes including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accessories such as pipe hooks, screws, clamps etc in trenches or laid in floor including testing complete all as specified and as directed. |
| 148 | Supply and Laying GI water tubing ISI marked medium grade of 25 mm bore for fresh water follwong sizes including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accessories such as pipe hooks, screws, clamps etc in in trenches or laid in floor including testing complete all as specified and as directed. |
| 149 | Supply, fixing testing in repair 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to GI tubing complete all as specified and as directed. |
| 150 | Supply, fixing testing in repair 50 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to GI tubing complete all as specified and as directed. |
| 151 | Excavation in trenches not exceeding 1.5 M in wide and not exc. 1.5 M in depth for taking out or laying of under ground cable in soft / loose soil complete all as specified and as directed. |
| 152 | Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil complete all as specified and as directed. |
| 153 | Removing surplus soil to a distance not exceeding 50 M and deposited at a level not exceeding 1.5 M above the starting point complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender