Tender For Repair And Painting To Various Steel Furniture Under Ge (West) Bareilly
Tender Value
43.70 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting To Various Steel Furniture Under Ge (West) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work : REPAIR AND PAINTING TO VARIOUS STEEL FURNITURE UNDER GE (WEST) BAREILLY Contract No :CWE BLY/ GE(W)/ 103 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Notes applicable to SI Item Nos 2.00 to 41.00:- (a) Removing existing unserviceable part and S&F following similar new part with & including all necessary welding or other fixing accessories as per MES pattern viz F/FD/DB/MAP series or Similar items complete all as directed by Engineer-in-Charge. (b) The welding required for fixing of new parts will not be measured against this item. The same shall be deemed to be included in the quoted rate of the new part. (c ) Work shall be executed where the furniture exist in different User units/ Md Accn under GE (W) Bareilly including BSO's Furniture Yard as directed by Engineer-in-Charge. |
| 3 | ALMIRAH STEEL LARGE WITH SHELVES Drg No FD-1031 |
| 4 | Replacement of unserviceable Lock and S&F lock of steel Almirah Large steel with MS lock 50 mm with 6 lever , Godrej pattern with duplicate keys fixed with suitable screws & nuts, best quality as approved by GE |
| 5 | Replacement of unserviceable handle and S&F Handle CP of Almirah large steel with chromium plated 150 mm long Godrej pattern best quality as approved. |
| 6 | Replacement of unserviceable bush and S&F Bush (handle seat) of Almirah large/Med/small steel with best quality bush made of brass as per sample approved. |
| 7 | Replacement of unserviceable cleats and S&F Corner cleats for supporting shelves made out of 3 mm thick MS black sheet, bent to the shape as per sample and to be fixed with suitable machine screws under shelves. |
| 8 | Replacement of unserviceable legs and S&F Base legs of Almirah med steel made out of MS black sheet 1 mm thick made to the rectangular shape of size shown on as par drg for almirah duly welded with Electric arc welding to the Almirah including necessary painting to match the existing surfaces all as directed. |
| 9 | Electric arc welding to the broken joints upto 1 cm long of Almirah large/medium steel as required including necessary painting to match the existing surfaces all as directed. |
| 10 | Replacement of unserviceable shelves and S&F Shelves of Almirah large steel made out of MS black sheet 1 mm thick of shape and size shown on as per drg, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 11 | Replacement of unserviceable three way locking device and S&F Three way locking device made with 10mm mild steel round bar fixed with shutter of Almirah Large Steel complete with all accessories including, MS cover & handle size and shape as required as per drawing, duly painted with two coats of synthetic enamel paint colour as per approved by GE/EIC 1st grade over a coat of red oxide primer complete. |
| 12 | Repair to door of Almirah large steel as specified including all necessary welding . |
| 13 | Replacement of unserviceable cover and S&F Cover made of 1mm thick MS sheet bent to the shape & size as per drawing suitable for Almirah large with shelves for locking device duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 14 | Cleaning the all steel surfaces of Almirah large steel by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint of existing shade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 15 | ALMIRAH STEEL MEDIUM/SMALL WITH SHELVES Drg No FD-1032 |
| 16 | Replacement of unserviceable Lock and S&F lock of steel Almirah Medium/small steel with MS lock 50 mm with 6 lever , Godrej pattern with duplicate keys fixed with suitable screws & nuts, best quality as approved by GE . |
| 17 | Replacement of unserviceable handle and S&F Handle CP of Almirah Med/small steel with chromium plated 150 mm long Godrej pattern best quality as approved. |
| 18 | Replacement of unserviceable bush and S&F Bush (handle seat) of Almirah Med/small steel with best quality bush made of brass as per sample approved. |
| 19 | Replacement of unserviceable cleats and S&F Corner cleats for supporting shelves made out of 3 mm thick MS black sheet, bent to the shape as per sample and to be fixed with suitable machine screws under shelves. |
| 20 | Replacement of unserviceable legs and S&F Base legs of Almirah med steel made out of MS black sheet 1 mm thick made to the rectangular shape of size shown on as par drg for almirah duly welded with Electric arc welding to the Almirah including necessary painting to match the existing surfaces all as directed. |
| 21 | Electric arc welding to the broken joints upto 1 cm long of Almirah medium steel as required including necessary painting to match the existing surfaces all as directed. |
| 22 | Replacement of unserviceable shelves and S&F Shelves of Almirah med/small steel, made out of MS black sheet 1 mm thick of shape and size shown on as per drg, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 23 | Replacement of unserviceable three way locking device and S&F Three way locking device made with 10mm mild steel round bar fixed with shutter of Almirah med/small Steel complete with all accessories including, MS cover & handle size and shape as required as per drawing, duly painted with two coats of synthetic enamel paint colour as per approved by GE/EIC 1st grade over a coat of red oxide primer complete. |
| 24 | Repair to door of Almirah med/small steel as specified including all necessary welding . |
| 25 | Replacement of unserviceable cover and S&F Cover made of 1mm thick MS sheet bent to the shape & size as per drawing suitable for Almirah Medium small with shelves for locking device duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 26 | Cleaning the all steel surfaces of Almirah med/small steel by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint of existing shade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 27 | ALMIRAH STEEL LARGE FD/E6/MAP18) |
| 28 | Replacement of unserviceable Lock and S&F lock of steel Almirah Large MAP with MS lock 50 mm with 6 lever , Godrej pattern with duplicate keys fixed with suitable screws & nuts, best quality as approved by GE |
| 29 | Replacement of unserviceable handle and S&F Handle CP of Almirah large Map steel with chromium plated 150 mm long Godrej pattern best quality as approved. |
| 30 | Replacement of unserviceable bush and S&F Bush (handle seat) of Almirah large map steel with best quality bush made of brass as per sample approved. |
| 31 | Replacement of unserviceable ms hinges and S&F MS hinges 75 mm long heavy duty including necessary painting as per sample approved. |
| 32 | Replacement of unserviceable cleats and S&F Corner cleats for supporting shelves made out of 3 mm thick MS black sheet, bent to the shape as per sample and to be fixed with suitable machine screws under shelves. |
| 33 | Replacement of unserviceable legs and S&F Base legs of Almirah large map steel made out of MS black sheet 1 mm thick made to the rectangular shape of size shown on as per drg reqd for almirah duly welded with Electric arc welding to the Almirah including necessary painting to match the existing surfaces all as directed. |
| 34 | Removing the unserviceable hanging rod and S& F new hanging rod of 20mm dia chromium plated steel conduite pipe with side stoppers as per as specified and direrected. |
| 35 | Removing the unserviceable locker handle and S&F new locker handle of Godrej pattern as per existing shape and size. |
| 36 | Removing the unserviceable drawer handle and S&F new drawer handle of as per existing shape and size. |
| 37 | Electric arc welding to the broken joints upto 1 cm long of Almirah large map steel as required including necessary painting to match the existing surfaces all as directed. |
| 38 | Replacement of unserviceable shelves and S&F Shelves of Almirah large steel MAP , made out of MS black sheet 1 mm thick of shape and size shown on as per drg, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 39 | Replacement of unserviceable three way locking device and S&F Three way locking device made with 10mm mild steel round bar fixed with shutter of Almirah Large Steel map complete with all accessories including, MS cover & handle size and shape as required as per drawing, duly painted with two coats of synthetic enamel paint colour as per approved by GE/EIC 1st grade over a coat of red oxide primer complete. |
| 40 | Repair to door of Almirah large steel MAP as specified including all necessary welding |
| 41 | Replacement of unserviceable cover and S&F Cover made of 1mm thick MS sheet bent to the shape & size as per drawing suitable for Almirah large steel map for locking device duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 42 | Cleaning the all steel surfaces of Almirah large steel map by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint of existing shade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 43 | BOOK CASE STEEL (FD-1028) : |
| 44 | Removing the unserviceable glass and S& F new glass as per drawing. |
| 45 | Removing the unserviceable handle and S&F new handle of Godrej pattern as per existing shape and size. Rest all as specified and directed by Engr-in-charge. |
| 46 | Removing the unserviceable stopper and S&F new iron cleat stopper as per drg. |
| 47 | Removing of unserviceable MS lock and S&F complete new locking system (including lock frint) seat of 6 lever brass, Godrej pattern with duplicate keys fixed with suitable screws & nuts as per drawing, best quality as approved. |
| 48 | Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish complete. |
| 49 | Removing of dents and bends wherever required including welding. |
| 50 | Removing the unserviceable channel and S&F new channel with 1mm TH sheet for glass doors as per drawing. Rest all as specified and directed by Engr-in-charge. |
| 51 | Shelves of book case steel, made out of MS black sheet 1 mm thick of required size as per drawing, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 52 | MODERATE CHAIR (MODEL NO: EEZY-355) : DRAWING NO -TP |
| 53 | Replacement of arm rest of moderatenchair made of polyurethen,black integrated scratch & weather proof skin with MS insert as per sample complete. |
| 54 | Replacement of old/unservicable Seat & Back both complete made with 12 mm thick hot pressed plywood covered with 50mm thick & 50-55 density Polyurethene foam cushion,upholestered with best quality fabric as approved & PVC lipping allround the seat & back.Shape & size as per specified & shown in drawings & directed. |
| 55 | S&F new superior quality cover cloth covering seat and back as shown on drg and directed by Engr-in-Charge. |
| 56 | Taking down unserviceable MS flat iron stiffener and S&F new MS flat iron stiffener of existing shape & size as per drawing complete all as specified and directed. |
| 57 | Welding and removing dents, bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint 1st grade of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade over a coat of red oxide primer as directed. |
| 58 | TRESTLE SR IRON (DRAWING NO FD-1043) |
| 59 | Removing old unserviceable long rail of trestle store room and supply and fixing new long rail of required size at top complete all as specified and directed and shown on drawings. |
| 60 | All as per item no 07.01 but short rail. |
| 61 | All as per item no 07.01 but stiffener. |
| 62 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green to all exposed steel surfaces by spray painting up to a glossy finished shade complete. |
| 63 | Electric arc welding upto 1 cm long to the joints of trestle sr iron as required and as directed. |
| 64 | Table Invalid steel HFD-2007 |
| 65 | Replacement of unserviceable table top and S&F new SS top of required shape & size as per drawing complete , confirming to IS specification and fixing & finishing shall be done in accordance with standard workmanship and drawing complete all as specified and directed. |
| 66 | Replacement Twin wheel Castor as per existing shape & size and as per drawing. |
| 67 | Replacement of unserviceable legs and S&F Legs of mild steel 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 68 | Replacement of unserviceable stiffener and S&F Stiffener with mild steel 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over a coat of red oxide primer complete. |
| 69 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 70 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 71 | TABLE DINING OR'S (DRAWAING NO : FD-165(M) |
| 72 | Replacement of unserviceable legs and S&F Table legs with 25 mm MS square tubes 760mm long, 1.6 mm thick , duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing colour complete. |
| 73 | Replacement of unserviceable top frame and S&F Top frame long rail/long stiffner with 25 mm MS square tube 1.6 mm thick & 1600mm long, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing colour complete. |
| 74 | Replacement of unserviceable top frame short rail/short stiffener and S&F Top frame short rail/short stiffner with 25 mm MS square tube 1. 6 mm thick & 515mm long, duly painted with two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer to match with the existing surface over a coat of red oxide primer complete. |
| 75 | Replacement of unserviceable top and S&F Table top with 18 mm thick MDF Pre-laminated board conforming to IS specifications as approved of size 1900 x 685 mm duly covered with 22 gauge thick aluminium sheet as required for top complete. |
| 76 | Replacement of rubber shoes with best quality hard rubber shoes as approved. |
| 77 | Electric arc welding upto 1 cm long to the MS pipe joints of table dinning ORs as required and as directed. |
| 78 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green to all exposed steel surfaces by spray painting up to a glossy finished shade including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 79 | TABLE BED SIDE STEEL TYPE I & II (HFD-2006) |
| 80 | Replacement of wheel/ Castor 50mm dia with locking facility and rear end buffers of table bed side steel type I as per drawing complete. |
| 81 | Replacement of stainless/Mild steel door 20 GA of table bed side steel type I as per drawing complete. |
| 82 | All as per item no 10.02 but door having ventilation louvers of table bed side type II. |
| 83 | Replacement of Cam lock (Brass) of table bed side steel type I as per drawing complete. |
| 84 | All as per item no 10.02 but drawer of table bed side type I. |
| 85 | Taking down unserviceable plywood and S&F new ISI marked plywood of 406x406x12mm thick of table bed side type I as per drawing complete. |
| 86 | Taking down unserviceable SS top and S&F new suprerimposed stainless steel top of 24 GA of size 410x410mm with 2 cm raised edges on three sides of table bed side type I as per drawing complete. |
| 87 | All as per item no 10.06 but SS top of size 400x400mm of table bed side type II. |
| 88 | Taking down unserviceable Aluminium strips and S&F new ISI marked Aluminium strips of required shape and size of table bed side type I as per drawing complete. |
| 89 | Taking down unserviceable buffers and S&F new ISI marked High Density Polumer buffers of required shape and size of table bed side steel type I as per drawing complete. |
| 90 | Replacement of rubber shoes of table bed side steel type II as per drawing complete. |
| 91 | Taking down unserviceable kob and S&F new Brass knob with blank of table bed side type II as per drawing complete. |
| 92 | Taking down unserviceable MS tubular leg and S&F new MS tubular leg of 18 SWG of required shape and size of table bed side type II as per drawing complete. |
| 93 | Electric arc welding to the broken joints upto 1 cm long of table bed side steel as required including necessary painting to match the existing surfaces all as directed. |
| 94 | Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 95 | TABLE OFFICE CLERK STEEL : DRAWING NO FD-1004 |
| 96 | Replacement of unserviceable top and S&F Top of size 1200mmx600mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 97 | Replacement of unserviceable drawere and S&F Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 98 | Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved. |
| 99 | Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 100 | Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over a coat of red oxide primer complete. |
| 101 | Replacement of unserviceable shoe and S&F Hard rubber shoes of best quality as approved. |
| 102 | All as per item no 11.06 but shutter complete (including lock) of table office clerk steel. |
| 103 | All as per item no 11.06 butHard plastic handle of drawer of best quality. |
| 104 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 105 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 106 | TABLE OFFICE OFFICER STEEL : DRAWING NO : FD-1003 |
| 107 | Replacement of unserviceable top and S&F Top of size 1680mmx870mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 108 | Table drawer with drawers made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 109 | Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved. |
| 110 | All as per item no 12.01 but Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 111 | All as per item no 12.01 but Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 112 | All as per item no 12.01 but Hard rubber shoes of best quality as approved. |
| 113 | All as per item no 11.01 but shutter complete (including lock) of table office clerk steel. |
| 114 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 115 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 116 | TABLE 1520mmX860x760mm :DRAWING NO : FD-1010 |
| 117 | Replacement of unserviceable top and S&F Top of size 1520mmx860mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 118 | Table unserviceable of shot rail, long rail and stiffener and S&F short rail, long rail and stiffener change shown on as per drg made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 119 | Replacement of unserviceable legs and S&F Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 120 | All as per item no 13.03 but Hard rubber shoes of best quality as approved. |
| 121 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of primer complete. |
| 122 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 123 | TABLE 1670mmX760/750mm :DRAWING NO : FD-1012 |
| 124 | Replacement of unserviceable top and S&F Top of size 1670mmx760mmx750mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 125 | Table unserviceable of shor rail, long rail and stiffener and S&F short rail, long rail and stiffener change shown on as per drg made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 126 | Replacement of unserviceable legs and S&F Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 127 | All as per item no 14.03 but Hard rubber shoes of best quality as approved |
| 128 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of primer complete. |
| 129 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 130 | TABLE 900x600x760mm with drawer steel :DRAWING NO : FD-1008. |
| 131 | Replacement of unserviceable top and S&F Top of size 900x600x760mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 132 | Replacement of unserviceable drawer and S&F Table drawer with drawers made out of 1 mm thick mild steel black sheet (including lock) size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 133 | Replacement of unserviceable lock and S&F Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved. |
| 134 | Replacement of unserviceable legs and S&F Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 135 | Replacement of unserviceable handle and S&F Hard plastic handle of drawer of best quality. |
| 136 | All as per item no 15.04 but Hard rubber shoes of best quality as approved |
| 137 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of primer complete. |
| 138 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 139 | TABLE 900x600x760mm without drawer steel :DRAWING NO : FD-1007 |
| 140 | Replacement of unserviceable top and S&F Top of size 900x600x760mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 141 | Table unserviceable of shor rail, long rail and stiffener and S&F short rail, long rail and stiffener change shown on as per drg made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 142 | Replacement of unserviceable legs and S&F Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 143 | All as per item no 16.03 but Hard rubber shoes of best quality as approved |
| 144 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of primer complete. |
| 145 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 146 | TABLE marble top :DRAWING NO : FD-1014 |
| 147 | Replacement of unserviceable top and S&F Top of size shape and size shown on as per drg, Replacement of unserviceable/ broken marble/ Granite top and S&F new marble top of size 900x900x18/20mm thick as per drg all as specified and directed. |
| 148 | Table unserviceable of short rail, long rail and stiffener and S&F short rail, long rail and stiffener change shown on as per drg made out of 1 mm thick mild steel black sheet size and shape required and shown on drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 149 | Replacement of unserviceable legs and S&F Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 150 | Replacement of unserviceable shoe and S&F Hard rubber shoes of best quality as approved |
| 151 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of primer complete. |
| 152 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 153 | TABLE CENTRE BRASS DRAGWING No : FD-375 |
| 154 | Replacement of unserviceable broken glass top and S&F new glass top of size 1200x900x12mm as per drg all as specified and directed. |
| 155 | Replacement of unserviceable vaccum rubber shoes and S&F new vaccum rubber shoes as approved quality. |
| 156 | Replacement of unserviceable PVC rubber shoes and S&F new PVC rubber shoes as approved quality. |
| 157 | Removing dents and bends wherever required and cleaning all brass surfaces thoroughly by using abrasive emery of various sizes and putty as required and applying two coats of brasso polish as per drawing. |
| 158 | LEATHER CUSHION CHAIR WITH FULL DESKLED & PAPER TRAY , MAKE : GODREJ: (TP) |
| 159 | Removing unserviceable seat & back and S&F new leather cushion seat & back complete and fix it properly with the help of screws (04 Nos) through the side conduite rail as per existing shape and size. |
| 160 | Replacement of upholstery of seat & back with Fabric best quality as approved by GE(Rate of fabric not less than Rs 300 per RM). Fix it properly with the help of screws (04 Nos) through the side conduite rail as per existing shape and size. |
| 161 | Removing unserviceable handle and S&F new handle having black integral skin, polyurethane reinforced with suitable m/c screw as per drawing. It shall be scratch and weather rasistance. |
| 162 | Taking down of old unserviceable hand board and S&F new hand board made of 18 mm thick both side prelaminated teak faced MDF board of existing shape & size with PVC edging all around the top & fixed with suitable screws complete. |
| 163 | Taking down unserviceable MS half round support and S&F New MS Half roud support with duly two coats of synthetic enamel paint 1st grade over a coat of red oxide primer to fix the hand board complete all as per specified and directed.. |
| 164 | Removing unserviceable paper tray and S&F new paper tray as per existing shape and size. |
| 165 | Removing us/ hard rubber shoes and S&F new hard rubber shoes as per existing shape and size. |
| 166 | Cleaning all steel surfaces of Leather cushion chair thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of existing paint (1st grade paint) (Godrej pattern) over a coat of red oxide primer by means spray/ brush to a glossy finished shade all as including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 167 | MUTIPURPOSE LEATHERITE CUSHIONED CHAIR WITH & WITHOUT ARM REST MAKE GODREJ: (TP) |
| 168 | Removing unserviceable cushioned seat & back and S&F new cushioned seat & back complete and fix it properly with the help of screws (04 Nos) through the side conduite rail as per existing shape and size of multipurpose cushioned chair with arm as per existing shape & size and drawing. |
| 169 | All as per item no 20.01 but leather cushioned seat & back of Leatherite cushioned chair without arm. |
| 170 | Removing unserviceable upholstery of seat & back and S&F new upholstery of seat & back complete of multipurpose cushioned chair with arm as approved as per existing shape & size and drawing (Rate of fabric not less than Rs 250 per RM) . Fix it properly with the help of screws (04 Nos) through the side conduite rail . |
| 171 | All as per item no 20.03 but leatherite cushioned chair without arm (Rate of fabric not less than Rs 300 per RM). |
| 172 | Taking down unserviceable arm rest and S&F new arm rest made of MS conduite pipe ( 20 Gauge) (double pipe) , painted two coat of sunthetic enamel black paint over a coat of red oxide primer and tightening properly with the help of s/s screws and hard plastic cap as per existing shape & size and drawing. |
| 173 | Cleaning all steel surfaces of multipurpose cushioned chairs thoroughly by using abrasive cloth emery various sizes and putty as required as per trade practice and applying two coats of existing paint (1st grade paint) (Godrej pattern) over a coat of red oxide primer by means brush to a glossy finished shade all as including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 174 | CLASS ROOM CHAIR WITH WRITING BOARD : TP |
| 175 | Replacement of old unserviceable hand board and S&F new hand board made of 18 mm thick both side prelaminated teak faced MDF board of required shape and size, with PVC edging all round the top as per drawing and fixed with suitable screws complete all as specified and directed and shown on drg. |
| 176 | Replacement of unserviceable & deficient MS rod and S&F new MS rod of required shape and size, duly two coats of synthetic enamel paint 1st grade over a coat of red oxide primer to fix the hand board complete all as specified and directed and shown on drg. |
| 177 | Replacement of unserviceable handle and S&F new handle as per existing shape and size. |
| 178 | Removing dents, bends and welding wherever required then cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and apply putty as required and applying two coats of existing paint over a coat of red oxide primer of required shade as approved by the spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 179 | TEAPOY VERANDAH : DRAWING NO : FD-383 |
| 180 | Replacement of unserviceable top and S&F Top size as per drawing made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 181 | Removing unserviceable hard rubber shoes and S&F new hard rubber shoes as per drg |
| 182 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed. |
| 183 | Cleaning the old and new steel surface of teapoy verandah thoroughly by using abrasive cloth emery as required and applying two coats of white/black synthetic enamel paint 1st grade to all metal/steel surface and providing 4 Nos hard rubber shoes of each as approved by GE. |
| 184 | TEAPOY VERANDAH : DRAWING NO : FD/E6/MAP/17 |
| 185 | Replacement of unserviceable top and S&F Top size as per drawing made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 186 | Replacement unserviceable MS bar base tray and S&F new bar base tray of 5mm dia (12x10 Nos at equidistant) as per drg and specified. |
| 187 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed. |
| 188 | Removing unserviceable hard rubber shoes and S&F new hard rubber shoes as per drg |
| 189 | Cleaning the old and new steel surface of teapoy verandah thoroughly by using abrasive cloth emery as required and applying two coats of white/black synthetic enamel paint 1st grade to all metal/steel surface and providing 4 Nos hard rubber shoes of each as approved by GE. |
| 190 | LOCKER BED SIDE STEEL : DRAWING NO FD-1029 |
| 191 | Replacement of unserviceable/deficient \\"D\\" type chromium plated steel handle complete all as specified and directed. |
| 192 | Replacement of unserviceable 75mm long chromium plated S&F of 75mm long chromium plated steel hasp and staple complete all as specified and directed. |
| 193 | Replacement of unserviceable hanging rod S&F of hanging rod made of MS chromium plated pipe made of 19mm dia 1.6 mm thick and 380mm long with socket complete all as specified and directed. |
| 194 | Electric arc welding to the broken joints upto 1 cm long of the Locker steel as required including painting to match the existing surface as directed. |
| 195 | Replacement of unserviceable base and S&F Base leg of Locker steel made out of MS black sheet 1 mm thick made to the rectangular shape of size 100mm heightX50mm wideX 550mm long as reqd for Locker duly welded with Electric arc welding to the Locker including necessary painting to match the existing surface complete. |
| 196 | Replacement of unserviceable shelves and S&F Shelves of locker bed side steel made out of MS black sheet 1 mm thick of required shape & size as per drawing, duly painted with two coats of synthetic enamel paint colour as per approved by GE/EIC and 1st grade over a coat of red oxide primer complete. |
| 197 | All as per item no 24.06 but Repair to sides as specified and directed by Engr-in-Charge . |
| 198 | All as per item no 24.06 but New shutter as per drg. |
| 199 | Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 200 | LOCKER CUPBOARD : DRAWING NO SKD-562 |
| 201 | Replacement of unserviceable/deficient \\"D\\" type chromium plated steel handle complete all as specified and directed. |
| 202 | Replacement of unserviceable 75mm long chromium plated steel hasp and staple complete all as specified and directed. |
| 203 | Replacement of unserviceable hanging rod made of MS chromium plated pipe made of 19mm dia 1.6 mm thick and 380mm long with socket complete all as specified and directed. |
| 204 | Electric arc welding to the broken joints upto 1 cm long of the Locker cup board steel as required including painting to match the existing surface as directed. |
| 205 | Replacement of unserviceable base and S&F Base leg of Locker cop board steel made out of MS black sheet 1 mm thick made to the rectangular shape of size shown on as per drg reqd for Locker duly welded with Electric arc welding to the Locker including necessary painting to match the existing surface complete. |
| 206 | Replacement of unserviceable shelves and S&F Shelves of locker cupboard, made out of MS black sheet 1 mm thick of required shape & size as per drawing, duly painted with two coats of synthetic enamel paint colour as per approved by GE/EIC and 1st grade over a coat of red oxide primer complete. |
| 207 | Repair to sides as specified and directed by Engr-in-Charge . |
| 208 | All as per item no 25.06 but new shutter as per drg. |
| 209 | Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel paint Olive Green 1st grade over a coat of red oxide primer to internal surfaces including shelves and external surfaces up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 210 | FORM WITHOUT BACK : DRAWING NO FD -1027 |
| 211 | Replacement of unserviceable top plank S&F of top plank with 1st class hard wood, sheesham wood plank 25mm thick of size 1525x255mm free from all timber defects duly well finished as per drawing. |
| 212 | Electric arc welding to the broken joints upto 1 cm long of the form as required including painting to match the existing surface as directed. |
| 213 | Cleaning the wooden/steel surfaces thoroughly by using abrassive cloth and applying putty as required as per trade practice and apply good quality of polishing to the wooden top & painting with synthetic enamaled Olive Green in a glossy finish shade on steel surfaces as per specified and directed. |
| 214 | STOOL STEEL (WITH BACK REST) TYPE II 300X300X510MM : DRAWING No : HFD - 2008 |
| 215 | Removing of unserviceable cushioned seat & back and S&F new cushioned seat & back complete of required shape & size as per drawing and fix with accurate machine screw as per drawing. |
| 216 | Replacement of upholstery of seat & back with Fabric best quality as approved by GE (Rate of fabric not less than Rs 300 per RM). |
| 217 | Removing unserviceable rear leg and S&F new MS tubular ( 22ø ) legs of CRCA quality & 18 SWG with best quality rubber shoes, of required size as per drawings including two coats of synthetic enamel black paint 1st grade over a coat of red oxide primer complete all as per specified and directed. |
| 218 | All as per item no 27.03 but front leg of of stool steel. |
| 219 | All as per item no 27.03 but Removing of unserviceable / broken MS ring and S&F new MS ring CRCA quality of 22mm dia ring as per drg. |
| 220 | Taking down unserviceable MS stiffener and S&F new MS stiffners of size 350mmx25mmx5mm as per drg. |
| 221 | Electric arc welding to the broken joints upto 1 cm long of stool steel with back rest type II as required including necessary painting to match the existing surfaces all as directed. |
| 222 | Removing unserviceable hard rubber shoes and S&F new hard rubber shoes as per drg |
| 223 | Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and welding where required than two coat of spray painting with synthetic enamel black 1st grade over a coat of red oxide primer up to a glossy finish complete. |
| 224 | SHOE RACK STEEL:(DRAWING No: E6/MAP/02(R ) : |
| 225 | Removing unserviceable side frame and S&F new side frame of 25mm dia MS pipe (18 gauge) as per existing shape and size. |
| 226 | Removing unserviceable main frame work and S&F new main frame work of 19mm dia MS pipe (18 gauge), horizontal MS rod of 3mm dia (3 Nos equidistant) and verticle MS rod of 3mm dia (9 Nos equidistant) welded to side frame as per existing shape and size. |
| 227 | Electric arc welding to the broken joints upto 1 cm long of steel shoe rack as required including necessary painting to match the existing surfaces all as directed. |
| 228 | Removing unserviceable Rubber shoe and S&F new rubber shoe as per existing shape and size. |
| 229 | Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel black 1st grade over a coat of red oxide primer up to a glossy finish complete. |
| 230 | EXAMINATION COUCH : DRG NO FD-122 (M) :- |
| 231 | Taking down unserviceable drawer and S&F new Drawer with Aluminium handle as per drawing complete all as specified and directed. |
| 232 | All as per item no 29.01 but sliding tray of examination couch. |
| 233 | Replacement of upholstery of examination couch with Fabric best quality as approved by GE (Rate of fabric not less than Rs 300 per RM). |
| 234 | Taking down unserviceable top seat and S&F new top seat complete of required shape & size as per drawing, including copper plated steel springs, cotton layers, teak wood plank, upholstery as approved by GE, rest all as per drawing complete (Rate of fabric not less than Rs 300 per RM all as per specified and directed). |
| 235 | Electric arc welding to the broken joints upto 1 cm long of examiantion couch as required including necessary painting to match the existing surfaces all as directed. |
| 236 | Removing unserviceable Rubber shoe and S&F new rubber shoe as per existing shape and size. |
| 237 | Cleaning the all steel surfaces by using various types abrasive cloth emery, filling with putty and two coat of spray painting with synthetic enamel olive green paint of 1st grade over a coat of red oxide primer up to a glossy finish complete. |
| 238 | LATERAL FILING CABINET FOUR DRAWERS/ FILING STEEL CABINET FOR BOOKS : DRG NO- FD-397 |
| 239 | Taking down unserviceable locking device and S&F new Locking device of required shape & size complete as per drawing complete all as specified and directed. |
| 240 | Taking down unserviceable Drawer and S&F new Drawer with sliding channel, rubber supports & handle as per drawing all as specified and directed. |
| 241 | Taking down unserviceable sliding channel and S&F new sliding channel with rubber supports as per drawing all as specified and directed. |
| 242 | Taking down unserviceable drawer stopper and S&F new MS stopper of required shape & size as per drawing all as specified and directed. |
| 243 | Taking down unserviceable rubber support and S&F new rubber supports for drawer of approved quality as per drawing all as specified and directed. |
| 244 | Electric arc welding to the broken joints upto 1 cm long as required including necessary painting to match the existing surfaces all as directed. |
| 245 | cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing shade 1st grade (Godrej pattern) over a coat of red oxide primer to internal surfaces including drawers and external surfaces up to a glossy finish complete all as per including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 246 | TABLE WRITNG SINGLE DRAWER T-111 / TABLE WRITING GODREJ : DRG NO- TP : |
| 247 | Replacement of unserviceable top and S&F Top of size 1215mmx630mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 248 | Replacement of unserviceable drawer and S&F Drawer made out of 1 mm thick mild steel black sheet size & shape required and shown on drawings including two coats of synthetic enamel paint of existing shade 1st grade over a coat of red oxide primer complete all as specified and directed. |
| 249 | Replacement of unserviceable lock and S&F Drawer lock of mild steel 50 mm, 6 lever (brass lever) of best quality with duplicate keys as approved. |
| 250 | Replacement of unserviceable legs and S&F Legs with 25 mm mild steel square tubes 1.6 mm thick size required as per drawings including two coats of synthetic enamel paint of existing shade 1st grade over a coat of red oxide primer complete. |
| 251 | Replacement of unserviceable stiffener and S&F Stiffener with 25 mm size mild steel square tube 1.6 mm thick size required as per drawings including two coats of synthetic enamel olive green paint over 1st grade over a coat of red oxide primer complete. |
| 252 | Replacement of unserviceable shoe and S&F Hard rubber shoes of best quality as approved. |
| 253 | Replacement of unserviceable handle and S&F Hard plastic handle of drawer of best quality. |
| 254 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete. |
| 255 | Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel paint as per existing shade (Godrej pattern) 1st grade over a coat of red oxide primer to external surfaces up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 256 | RACK STEEL SHELVING 6'-3\\"x36\\"x18\\" / 2475x900x500mm : DRG- TP: |
| 257 | Taking down unserviceable shelf and S&F new shelf made of 1 mm thick MS sheet of shape & size as per drawing complete all as per specified and directed. |
| 258 | Taking down unserviceable tringular sheet and S&F new tringular sheet of 75x75x3mm thick F.I. cut to shape as per drawing all as specified and directed. |
| 259 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete. |
| 260 | Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel olive green paint of 1st grade over a coat of red oxide primer to all surfaces up to a glossy finish complete all as per including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 261 | RACK ADJUSTABLE STEEL 6 TIER WITH/WITHOUT CLOSED TYPE : DRG: FD-1038 |
| 262 | Taking down unserviceable shelf and S&F new shelf made of 1 mm thick MS sheet of rack steel 6 tier of shape & size as per drawing complete as per specified and directed. |
| 263 | Taking down unserviceable tringular sheet and S&F new tringular sheet of 75x75x3mm thick F.I. cut to shape as per drawing all as specified and directed. |
| 264 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel paint 1st grade over a coat of primer complete. |
| 265 | cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel olive green paint of 1st grade over a coat of red oxide primer to all surfaces(including inner surfaces) up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 266 | All as per item no 33.04 but rack steel 6 tier closed type. |
| 267 | TABLE COMPUTER : DRG: FD/E6/MAP/03 |
| 268 | Replacement of unserviceable top and S&F Top of size 910mmx570mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 269 | Replacement of unserviceable drawer and S&F Drawer (including telescopic channels & Knob) made of 18 mm TH MDF prelaminated board of exterior grade and 75 mm deep on telescopic channels. |
| 270 | All as per item no 34.01 but pull out tray (including telescopic channel) of required shape & size complete of table computer as per drawing.. |
| 271 | All as per item no 34.01 but kye board tray of size 450mmx480mm with telescopic channel complete. |
| 272 | All as per item no 34.01 but shelf of table computer of required shape & size as per drawing. |
| 273 | All as per item no 34.01 but Nylon buffers of legs as per drawing complete. |
| 274 | Cleaning the all steel surfaces by using various types of abrasive cloth emery, filling with putty and spray painting with two coats synthetic enamel black paint of 1st grade over a coat of red oxide primer to all surfaces up to a glossy finish including Removing of dents and bends. Rest all as per directed by Engr-in-charge. |
| 275 | Screen Movable 3 Fold steel : HFD-2017 |
| 276 | Replacement of old unserviceable cloth and S&F new washable synthetic cloth of size 2430x1680mm of light pastle colour fix with hooks and spring arrangement as per drawing. ( Rate of cloth not less than Rs. 350/ meter). |
| 277 | Replacement of unserviceable castor and S&F castor of 50mm dia of swivel type as per drawing. |
| 278 | Cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and apply putty as required and applying two coats of synthetic enamel paint (Ivory white/ light blue as approved by GE) 1st grade over a coat of red oxide primer of required shade by the spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 279 | Removing the dents , bends and welding wherever required , complete all as specified and directed by Engr-in-charge. |
| 280 | TABLE OFFICE CLERK (type I) 1500x750x750mm : HFD-2051 |
| 281 | Replacement of unserviceable top and S&F Top of size 1500mmx750mm made of 18mm thick MDF board exterior grade ( Grade I, Type-II ) ISI marked in colour / shade as approved by Engr-in-Charge / GE with 2mm thick PVC edging fixed on four sides with strong bonded chemical adhasive through hot pressed machine complete rest all as per drg. |
| 282 | Complete Table drawer with drawers made out of using two 'C' frames of cross section 62x14x1 mm thick as per drawing. Rest all as specified and directed by Engr-in-charge. |
| 283 | Complete key board tray with tray made out of 1.2mm prime quality CRCA steel of tray size 520x330mm as per drawing. Rest all as specified and directed by Engr-in-charge. |
| 284 | Replacement of unserviceable shoe and S&F Hard rubber shoes of best quality as approved. |
| 285 | Replacement of unserviceable handle and S&F Hard plastic handle of drawer of best quality. |
| 286 | Electric Arc welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 287 | Removing dents and bends wherever required including welding and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 288 | Hot Food Trolley HFD-2077 |
| 289 | Replacement of unserviceable wheels S&F of wheels as per drg ( including axel) of various trolley as per existing shape and size. Rest all as specified and directed by Engr-in-charge. |
| 290 | Repair to food warmer unit (including all parts) complete as per existing standards. Rest all as specified and directed by Engr-in-charge |
| 291 | Replacement of unserviceable food warmer unit S&F food warmer unit complete of trolley hot food as per existing capacity and specifications. Rest all as specified and directed by Engr-in-charge. |
| 292 | Replacement of unserviceable containers S&F containers of trolley hot food with new stainless steel container with cap of existing shape and size. Rest all as specified and directed by Engr-in-charge. |
| 293 | Electric Arc / Gas welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 294 | Tightening of complete trolley, Removing dents and bends of Hot food trolley wherever required including welding and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 295 | LaundryTrolley : HFD-2081 |
| 296 | Replacement of unserviceable wheels as per drg ( including axel) of various trolley as per existing shape and size. Rest all as specified and directed by Engr-in-charge. |
| 297 | Replacement of unserviceable Tubular handle steel of trolleylaundry with new tubular handle steel shape and size. Rest all as specified and directed by Engr-in-charge. |
| 298 | Electric Arc / Gas welding upto 1 cm long to steel joints/surfaces of any description all as required and as directed including two coats of synthetic enamel olive green paint 1st grade over a coat of red oxide primer complete. |
| 299 | Tightening of complete trolley, Removing dents and bends of laundry trolley and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coat of synthetic enamel paint olive green paint 1st grade over a coat of red oxide primer as approved by spray painting to all steel surfaces up to a glossy finished shade as directed. |
| 300 | Ladder for loft : Fd- 238 : |
| 301 | S&F new 25mm dia MS conduit rung as per approved by GE. |
| 302 | Electric arc welding upto 1 mm long to the MS conduit pipe joints as required and as directed. |
| 303 | Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint black to all exposed steel surfaces by spray painting up to a glossy finished shade complete. |
| 304 | CHAIR VERANDAH : DRAWING NO : FD-359 . |
| 305 | Removing old unserviceable cane from chiar verandah & re-caning the chairs etc with approved new plastic cane 4mm wide and 0.5mm thick half round as per Godrej pattern of colour as approved by Engr-in-Charge/ GE. |
| 306 | Replacement of unserviceable ms conduit pipe and S&F Conduit section any member made of MS conduit pipe 16 gauge, 19mm dia as per drg. |
| 307 | Replacement of unserviceable shoe and S&F Hard rubber shoe as per drg. |
| 308 | Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint white to all exposed steel surfaces by spray painting up to a glossy finished shade complete. |
| 309 | CHAIR VERANDAH : DRAWING NO : FD/MAP-II/06 . |
| 310 | Replacement of unserviceable PVC seat & back and S&F new seat & back of ISI marked, as approved by GE . Fix as per trade practice and shown on drawing. Rest all as per directed by Engr-in-charge. |
| 311 | Replacement of unserviceable ms conduit pipe and S&F Conduit section any member made of MS conduit pipe 16 gauge, 19mm dia as per drg. |
| 312 | Replacement of unserviceable shoe and S&F Hard rubber shoe as per drg. |
| 313 | Removing dents and bends wherever required and cleaning all steel surfaces thoroughly by using abrasive cloth emery of various sizes and putty as required and applying two coats of synthetic enamel paint black to all exposed steel surfaces by spray painting up to a glossy finished shade complete. |
| 314 | Preparation of surfaces i.e filliing all holes and cracks or deteriorated spots of old painted steel furniture with putty (Internally and externally) ,after applying fine sand paper for making the surface plain, welding where required and clean through water complete as directed than applying two coat of spray Painting of synthetic enamel Paint of 1st quality with suitable shade to items like Olive Green/Black/White as approved by GE, complete all as directed by Engineer-in-Charge for the following items are as under:- |
| 315 | FMN set FD-53 |
| 316 | Rack side with tray steel FD-97 |
| 317 | Stool steel revolving FD-1026 |
| 318 | Chair verandah :MAP/ Fd-2359 Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender