Tender For Repair/Maint Of Internal Electrification Including Fans, Geyser At Cadet Living Accn At Nda Khadakwasla.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Internal Electrification Including Fans, Geyser At Cadet Living Accn At Nda Khadakwasla.
BOQ
| Sl. No. | Item Description |
| 1 | Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights etc in its position, testing all the components / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps etc complete all as specified and as directed.Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative (supervisor) will report to concerned JE E/M at 0900hrs daily to collect the list of complaints and will submit the completion report on the same day before 1700hrs to the JE E/M. (iv) The contractor shall address all the given complaints within 24 hours from the time the list of complaints is handed over to him / his rep by the concerned JE E/M. In case the complaint is not addressed for whatsoever reason within the specified time limit (48 hrs), an amount of Rs 100/- per such complaint per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repairer for each at SQN AREA B Zone (04 x teams). (v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below. (vii) During the contract period, if the same complaint is repeated, it will be regarded as a single complaint, and no additional payment will be made for addressing the repeated issue. |
| 2 | Taking down carefully old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and as directed. |
| 3 | Taking down copper / aluminium concealed sub main wiring complete with all fixture and fittings including cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed. |
| 4 | M&L repair of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for One light/Fan point controlled by one way switch 6 Amps 240 volts complete all as specified and as directed. |
| 5 | M&L repair of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for one 3 pin / 6 Amps socket outlet point on independent board complete all as specified and as directed. |
| 6 | M&L repair of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for one 3 pin / 6 Amps socket outlet point on same board complete all as specified and as directed. |
| 7 | M&L repair of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for one light point controlled by two 2 way switch complete all as specified and as directed. |
| 8 | M&L repair of point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for one 15 Amps socket outlet point on independent board complete all as specified and as directed. |
| 9 | M&L repair of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type one bell/ buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and as directed. |
| 10 | M & L for sub main wiring with 2 runs of 1.5 sqmm main wire along with 1 run of 1.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit/casing caping (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and as directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 11 | M & L for sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit/casing caping (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and as directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 12 | M & L for sub main wiring with 2 runs of 4.00 sqmm main wire along with 1 run of 4.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit/casing caping (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and as directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 13 | M & L for sub main wiring with 2 runs of 6.00 sqmm main wire along with 1 run of 6.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit/ casing caping (medium grade) with all fittings & accessories fixed on wall/ceiling surface, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and as directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 14 | M & L for sub main wiring with 2 runs of 10.00 sqmm main wire along with 1 run of 10.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit/casing caping (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and as directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 15 | Supply only switch piano flush type SP one way, 5 / 6 Amps, 240 volt complete all as specified and as directed. |
| 16 | Supply only switch piano flush type SP one way, 20 Amps, 240 volt complete all as specified and as directed. |
| 17 | Supply only Switch piano 6 Amps single pole two way complete all as specified and as directed. |
| 18 | Supply only Socket outlet 5/6 Amps 5 pin flush type complete all as specified and as directed. |
| 19 | Supply only socket outlet , 3/5 pin , 5/15 Amps flush type complete all as specified and as directed. |
| 20 | Supply only switch socket combination with box, 2 in 1 , 3 pin , 6 and 16 amps flush type complete all as specified and as directed. |
| 21 | Supply only switch socket combination 5 pin ,5/6 Amp, flush type complete all as specified and as directed. |
| 22 | Supply only switch socket combination 5 pin multi purpose, 5/6 Amp, flush type with box complete all as specified and as directed. |
| 23 | Supply only Bell push, flush type, 6 Amps single pole complete all as specified and as directed. |
| 24 | Supply only Bed switch, 6 Amps single pole complete all as specified and as directed. |
| 25 | Supply only switch piano modular type one way one module, 10 Amps, 240 volt complete all as specified and as directed. |
| 26 | Supply only switch piano modular type one way 01 module, with neon indicator, 20 Amps, 240 volt complete all as specified and as directed. |
| 27 | Supply only switch piano modular type two way, 10 Amps independent, 240 volt complete all as specified and as directed. |
| 28 | Supply only modular type Bell push 10 A with neon indicator , 1 module complete all as specified and as directed. |
| 29 | Supply only socket outlet modular type 2/3 pin 6 Amps, 240 volts combined 2 module complete all as specified and directed. |
| 30 | Supply only socket outlet modular type 2/3 pin, combined 2 module, 6/16 Amps, 240 volts complete all as specified and as directed. |
| 31 | Supply only 1 module blanking plate complete all as specified and as directed. |
| 32 | Supply only electronic modular fan regulator, stepped type( 4 step), white 120 W - 2 module complete all as specified and as directed. |
| 33 | Supply only rigid non-metallic PVC casing capping, double lock type/PVC conduit (ISI marked) of size not less than 25mm, including all necessary accessories (e.g., bends, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete all as specified and as directed. This includes: a) Supply of 25mm or larger rigid non-metallic PVC casing capping/conduit (ISI marked). b) Supply of all necessary accessories (bends, elbows, connectors, saddles, screws, etc.).c )Securing loose wiring within the casing/conduit. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations.) Testing of the wiring after completion. Notes:Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work. |
| 34 | Supply only flexible conduit pipes, ivory grey,white in colour, with a minimum internal diameter of 25mm. The conduit shall be of a type suitable for [Specify application, e.g., electrical wiring, data cabling, etc.]. Installation includes cutting, bending (where necessary), and securing the conduit as per the approved design and complete all as specified and as directed. |
| 35 | Supply only rigid non-metallic PVC cable tray , double lock type (ISI marked) of size not less than 80x40mm, including all necessary accessories (e.g.,Bends (flat, internal, external),Risers,Couplers,Dividers,Support brackets, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete all as specified and as directed. This includes: a) Supply of 80x40mm or larger rigid non-metallic PVC cable tray. b) Supply of all necessary accessories (Bends (flat, internal, external),Risers,Couplers,Dividers,Support brackets, elbows, connectors, saddles, screws,round plate etc..c )Securing loose wiring within the cable tray. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations') Testing of the wiring after completion. Notes:Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work. |
| 36 | Supply only ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and as directed. |
| 37 | Supply only batten/angular type lamp holder, PVC/Polycarbonate type with back plate suitable for Led lamp complete all as specified and as directed. |
| 38 | Supply only stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade 100 W complete all as specified and as directed. |
| 39 | Supply only Door Bell, Ding Dong AC. 230 volts, single pole complete all as specified and as directed. |
| 40 | Supply only Wireless Door Bell, Ding Dong AC. 230 volts, single pole completed all as specified and directed. |
| 41 | Supply only plug top 3 pin, 6 amps, 230 volts, ISI marked heavy duty connection cord complete all as specified and as directed. |
| 42 | Supply only plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and as directed. |
| 43 | Supply only plug top 2 pin, 6 amps, 230 volts, ISI marked heavy duty connection cord complete all as specified and as directed. |
| 44 | Supply only metal clade sockets 20 amps, 230 volts, ISI marked heavy duty connection cord complete all as specified and as directed. |
| 45 | Supply only metal clade plugs 20 amps, 230 volts, ISI marked heavy duty connection cord complete all as specified and as directed. |
| 46 | Supply only for white cover plate with frame 1 or 2 module complete all as specified and as directed. |
| 47 | Supply only for white cover plate with frame 3 module complete all as specified and as directed. |
| 48 | Supply only for white cover plate with frame 4 module complete all as specified and as directed. |
| 49 | Supply only for white cover plate with frame 6 module complete all as specified and as directed. |
| 50 | Supply only for white cover plate with frame 8 module complete all as specified and as directed. |
| 51 | Supply only for white cover plate with frame 12 module complete all as specified and as directed. |
| 52 | Supply only for white cover plate with frame 16 module complete all as specified and as directed. |
| 53 | Supply only for white cover plate with frame 18 module complete all as specified and as directed. |
| 54 | Supply only PVC unbreakable surface boxes suitable for modular switches 1 or 2 module complete all as specified and as directed. |
| 55 | Supply only PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified and as directed. |
| 56 | Supply only PVC unbreakable surface boxes suitable for modular switches 4 module complete all as specified and as directed. |
| 57 | Supply only PVC unbreakable surface boxes suitable for modular switches 6 module complete all as specified and as directed. |
| 58 | Supply only PVC unbreakable surface boxes suitable for modular switches 8 module complete all as specified and as directed. |
| 59 | Supply only PVC unbreakable surface boxes suitable for modular switches 12 module complete all as specified and as directed. |
| 60 | Supply only PVC unbreakable surface boxes suitable for modular switches 16 module complete all as specified and as directed. |
| 61 | Supply only PVC unbreakable surface boxes suitable for modular switches 18 module complete all as specified and as directed. |
| 62 | Supply only square box, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 63 | Supply only round plate, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 64 | Supply only of PVC insulated copper cable 1 Sqmm 3 core, served with inner sheathing of PVC tape and overall PVC sheathed including PVC Conduit ISI Marked 20mm including all necessary bends, couplings, tees, and other accessories.Surface Saddling of PVC Conduit on Wall using approved saddles and fixing screws. Spacing as per specifications ( 1-meter intervals)complete all as specified and as directed. |
| 65 | Ditto all as per item no.64 above but 2,5 Sqmm 3 core complete all as specified and as directed. |
| 66 | Ditto all as per item no.64 above but 4 Sqmm 3 core complete all as specified and as directed. |
| 67 | Supply only 9 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed. |
| 68 | Supply only 5 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed. |
| 69 | Supply only 3 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed. |
| 70 | Supply only 0.5 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed. |
| 71 | Supply only 10 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 72 | Supply only 20 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 73 | Supply only 20 watt,230V 3 IN 1 surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 74 | Supply only 20 watt,230V surface and wall mounted Inverter LED batten, automatically switched ON during a power cut and runs effectively up to 3 Hrs, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 75 | Supply only 36 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 76 | Supply only Surface type LED Downlight lights 10 W Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 77 | Supply only Surface type LED Downlight lights 12 W Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 78 | Supply only Surface type LED Downlight lights 30 W Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 79 | Supply only COB light 12W LED Tiltable surface mounting and Environmental friendly, new generation, energy saving, decorative IP 66 complete all as specified and as directed. |
| 80 | Supply only LED building security light fitting 30 W, IP-65 protection made up of die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment complete all as specified and as directed. |
| 81 | Supply only 12 watt,230V surface and wall mounted white LED Mirror Light including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 82 | Supply only 9 watt,230V surface and wall mounted white LED Mirror Light including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 83 | Supply only Decorative wall mounting Wall Lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 84 | Supply only Decorative hanging table lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 85 | Supply only Decorative hanging with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 86 | Supply only surface/recess mounted 4' x 1' LED Panel lights 45 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and as directed. Note: The quoted price shall include the cost of Light and its driver. |
| 87 | Supply only surface/recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and as directed. Note: The quoted price shall include the cost of Light and its driver. |
| 88 | Supply only GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on building/pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and as directed. |
| 89 | Supply only Electronic Drivers, suitable for 9W, 10W, 20W, 30W, and 40W LED light/security light fittings, of compatible specifications and make as existing, including all necessary connections, testing, and commissioning, complete all as specified and as directed. |
| 90 | Supply only factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and as directed.(Make/Model of VTPN DB : Legrand/L&T/C&S) Note:MCBs/ MCCBs will be measured and paid separately under respective Sch A item in the schedule |
| 91 | Supply only MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size along with its accessories by removing from existing circuits and re-fixing the new DBs and circuits complete all as specified and as directed. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced. |
| 92 | Dittto all as per item no 101 above but 08 way SPN DB (Double door) |
| 93 | Dittto all as per item no 101 above but 04 way SPN DB (Single door) |
| 94 | Dittto all as per item no 101 above but 04 way SPN DB (Double door) |
| 95 | Dittto all as per item no 101 above but 02 way SPN DB (Single door) |
| 96 | Supply only MCCB with rating of 125 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and as directed. |
| 97 | Dittto all as per item no 96 above but MCCB with rating of 125 Amps,415Volts 3pole with 16kA breaking capacity |
| 98 | Supply only C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and as directed. |
| 99 | Supply only C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and as directed. |
| 100 | Supply only C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and as directed. |
| 101 | Supply only C Curve MCB TP 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and as directed. |
| 102 | Supply only C Curve MCB TPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and as directed. |
| 103 | Supply only sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessories etc complete all as specified and as directed. |
| 104 | Supply only sheet metal enclosures Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps, 240 volts complete with all accessories etc complete all as specified and as directed. |
| 105 | M&L for repair of earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc complete all as specified and as directed. |
| 106 | Dismantling and removing rusted louvers suitable for 150/230/300/450/600 mm sweep exhaust fan S&F in repair of MS louvers duly painted gray coloured suitable for 150/230/300/450/600 mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as specified and as directed. |
| 107 | Supply only GI pipe ceiling fan down rod of 15 mm dia up to 3 feet long for ceiling fan made out of 15 mm dia GI heavy grade pipe fixed on ceiling using suitable clamp including necessary new nut, bolt and washer complete all as specified and as directed. |
| 108 | Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as specified and as directed. |
| 109 | Supply only capacitor of 2.5/4 mfd for ceiling fan/exhaust fan complete all as specified and as directed.. Make:Tibcon/Epcos/Havells |
| 110 | Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for exhaust fan/wall mounted fan complete all as specified and as directed.. Make:SKF |
| 111 | Disconnecting and taking down existing unserviceable geyser of 25/50/100 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismantling all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enamelled paint and re- fixing to original place complete all as specified and as directed. Note : 1.Cost of spares such as Thermostat, heating element etc will be measured and paid for separately under respective Item of sch A as supply only. |
| 112 | Supply only thermostat and cutout set electronic type, temperature adjustable from 0-80°C suitable for geyser of 25 to 100 ltrs capacity complete all as specified and as directed. |
| 113 | Supply only heating element of capacity 2/3 KW of any type and shape suitable for Existing 25 to 100 ltrs capacity geysers complete all as specified and as directed. |
| 114 | Supply only metallic flexible hot water connection 600/900 mm long including necessary washers suitable for geysers of 25 to 100 ltr capacity complete all as specified and directed. |
| 115 | Supply only neon lamp indicator square/round type after taking out old incl taking down old one complete all as specified and as directed.. |
| 116 | Supply only NRV valve of size 15mm dia of Brass complete complete all as specified and as directed. |
| 117 | Removal of the damaged or faulty inner tank from the geyser unit,Supply of a new inner tank of the correct size, material, and specifications, and its installation into the geyser unit. Include all necessary gaskets and seals.Implementation of protective measures to prevent damage to surrounding walls, floors, and fixtures during the inner tank repair complete all as specified and as directed.. |
| 118 | Supply of Self Adhesive PVC Electrical Insulation Tape, capable of withstanding temperatures up to [100] °C, Dimensions 7.5 m x 18mmx 0.125mm, for insulating high-temperature electrical connections complete all as specified and as directed.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender