Tender For Repair /Replacement To Tiling/Plastering, Joinery, Sanitary/Plumbing And Other Misc B/R Works In Otm Accn Of Cod Under Age B/R-1 Of Ge North Delhi Cantt-10
Tender Value
48 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
18 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Replacement To Tiling/Plastering, Joinery, Sanitary/Plumbing And Other Misc B/R Works In Otm Accn Of Cod Under Age B/R-1 Of Ge North Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) incl Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified. |
| 2 | Demolition of Plain concrete cement (unreinforced) of any description and in any position not otherwise specially provided. |
| 3 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in string courses, copings or as in floors or as in plinth protection. |
| 4 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth including takingdown existing cement plaster from wall complete all as specified and dircted. |
| 5 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth including taking down cement plaster from wall complete all as specified and dircted. |
| 6 | M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth including taking down cement plaster from ceilling complete all as specified and dircted. |
| 7 | M&L rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 finished even and smooth complete all as specified and as directed by engr-in-charge. |
| 8 | M&L 15 mm thick Rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and smooth without using extra cement all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for preparing plastered or unplastered new surfaces of ceilling and applying two coats of oil bound distemper complete all as specified and directed. |
| 10 | M&L for applying two coats of Oil Bound Distemper on old plastered/unplastered surface of Ceiling using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour) Step 1- Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 11 | M&L for applying two coats of Oil Bound Distemper on new plastered/unplastered surface of wall using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over M&L waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specifiec and as directed. |
| 12 | M&L for applying two coats of Oil Bound Distemper on old plastered/unplastered surface of wall using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour) step 1- Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 13 | M&L for two coats of cement base paint on old plastered/unplastered surface of wall using auto-roller and airless paint sprayer over one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of asian Paints Trucare graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent quotes incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 14 | M&L for preparation of new plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer complete all as specified and as directed. |
| 15 | M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed. |
| 16 | M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 17 | M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete. |
| 18 | M&L for preparation of old steel surfaces with complete removal of existing treatment and appliyng two coats of synthetic enamel paint coloured as approved by EIC over a coat of red oxide over a coat of red oxide up to 15 mtr height cmplete. complete all as specified and directed. |
| 19 | S&F in repairs for gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25mm x 24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed. |
| 20 | S&F prelaminated fire resistance PVC rigid foam sheet wall panelling of 5mm thick stck on inner frame of work of 35mm wide strip of 5mmm thick rigid foam sheet . The strip should have a groove of 6mm width and 2mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300mm c/c. The PVC strips to be fixed to the all using 65mm long MS screw through the groove in the strip using PVC fasters including necessary moulding work on doors, windows, pillars and opening etc.complete all as specified and directed.Note:- (a) Work for fixing of wall panelling shall be got exeduted through manufacturers authorised appllicators only under the close supervision of their techanical staff.(b) The entire quantity of wall panelling and their ancillaries shall be procured directly from the manufacturer or their authorised dealer only. |
| 21 | M&L WPC acoustic wall panelling of approved colour for indoor/outdoor wall 100% nontoxic, non feraldelyers, water proof, termite proof, anti-UV using necessary stainless steel clip/fixing arrangement including corner patti or moulded beading of same materials including dismantling of pannels all as specified and directed. |
| 22 | Providing & fixing false ceiling at all heights with Semi perforated 12mm thick thick micro tegular edged GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 23 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 24 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 25 | Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed. |
| 26 | M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 27 | S&F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) |
| 28 | S&F 40mm thick flush shutter (Factory made) soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 29 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note:- For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 30 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed. |
| 31 | S&F factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame(60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters)(45.5mm x 28mm).Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners,including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net opening will be measured for payment purpose)(A) Area not exceeding 2.00 sqm each(B) Area exceeding 2.00 sqm each |
| 32 | S&F factory made uPVC white color Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame(88mm x 52mm). Sliding sash (42mm x 67mm),Sliding mesh sash (42mm x 57mm) Sliding Interlock (One vertical length in each shutters)(45.5mm x 28mm).Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners,including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.]Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net opening will be measured for payment purpose)(A) Area not exceeding 2.00 sqm each(B) Area exceeding 2.00 sqm each |
| 33 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for Payment Purpose. |
| 34 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 35 | S&F powder coated of any colour aluminium door shutters, aluminium section weighing 0.55 kg/m incuding necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos, tower bolt in each door shutter, hinges powder coated aluminum snap beading screws etc, complete all as specified. |
| 36 | S&F powder coated of any colour aluminium window and ventilator shuttrs, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading screws etc complete all as specified |
| 37 | S&F in repairs drapery curtain rods Mild steel powder coated polished 25 mm dia incl brackets complete all as specified and directed. |
| 38 | S&F Anodised aluminum alloy powder coated standard hollow section for window two tracks including aluminum frame/ chowkhat with following specification including anodised aluminum snap beading, channels,5mm thick tinted glass, glazing clips joint cleats,rubber gassket etc and other accessories complete all as specified and directed. (a) Frame of section :- 83.50mmX44.50mmX1.60 mm thickness. (b) Sliding window section (channel):-40mmX18mm of 1.20mm thickness with locking arrangemeny. Note:- (1) The rate also included the cost of cutting, waste and making good disturbed surface matching with existing surface and finish as directed.(2) Minimum thickness of powder coating shall be 50 micron. (3) make for PVC sheet :- sintex,Rajshree,Tata. |
| 39 | S&F 4-5 mm thick sheet glass pane ordinary quality and glazing with rubber beading and aluminium glazing clip/patti area n.exc 1.00 Sqm each pan. |
| 40 | S&F in repair WPC Jaali 18mm thick any design and colour as directed by Engineer -in -charge complete |
| 41 | S&F in repair frame work of WPC size of frame 75mmX50 mm all as per direction of Engr-in-charge. |
| 42 | S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete. |
| 43 | S&F in repair 100 mm size butt hinges, extruded aluminum alloy with galvanised mild steel ISI marked. |
| 44 | S&F mild steel pressed steel handle, oval type, stove enamelled black 150 mm long complete all as specified. |
| 45 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete |
| 46 | S & F in repair Stainless steel, wire cloth 0.56 mm nominal dia of wire, and average width of aperature 1.18mm and fixed to steel or wooden window or doors with necessary fixing arrangement complete all as specified. |
| 47 | Providing and fixing 4mm thick aluminium composite panel (ACP) exterior grade (0.5mm PVDF coated Aluminium skin on top & bottom plus 3mm thick polyethylene core) on/all-round RCC/Brick column/ wall/ Fascia's/ M.S. section/ Aluminium section structure/ dead walls/under side sky light upto all height in required colour/pattern & panel size as (Area of panel shall not more than 0.60Sqm as per drawing fixed on aluminium extruded standard tubular section of size 38 x 25 x 1.6mm of approved make (Jindal/ Hindalco/ Indalco) conforming to IS;733 and IS; 1285, fixed at 600m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm (wide) x 20mm (deep) groove in joints or panels including filling the joints with weather silicon sealant of Dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking tap, primer/ gasket/ foam/ scaffolding/ cluding 10mm dia backer rod, The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/ gasket/ foam/ scaffolding/ Aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all necessary tools and plants, scaffolding and as per manufacturer's technical specifications, including dismantling of old sheet complete and as per the direction of the Engr-in-Charge (Surface area of aluminium composite panel shall be measured for payment. |
| 48 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete. |
| 49 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete. |
| 50 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double alyered hoisted and fixed in position including connecting up pipes including dismantling of PVC water tanks complete all as specified. |
| 51 | S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210gms), complete. |
| 52 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete. |
| 53 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 75mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete. |
| 54 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110 mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete. |
| 55 | Dismantling of Stone slabs and tiles of any description or thickness in floors/wall, aprons etc., laid bedded and pointed in any mortar complete all as speicified. |
| 56 | M&L for 75mm thick type-D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base to receive stone slab and pavement all as specified and directed. |
| 57 | M&L 20 to 25 mm thick machine cut Kota stone slab mirror polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 58 | M&L 20 to 25 mm thick machine cut Kota stone slab polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 59 | M&L granite 20mm thick colour as approved (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or making oval shape hole for fixing of wash hand basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 including moulding and polishing the edges complete all as specified and directed |
| 60 | M&L granite 20mm thick colour as approved (of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding and polishing the edges etc complete all as specified and directed. |
| 61 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 62 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified. |
| 63 | M&L Vitrified ceramic tiles 10 mm thick square/rectangular dark shade) granite or marble texture polished, area of each tiles not exceeding 0.36 sqm,in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed. Make :Somany ,KajarIa ,Orient. |
| 64 | Ditto- but in vertical surface as skirting, dado and risers to steps over and including10 mm thick rendering/backing coat in cement mortar 1:4 etc. |
| 65 | M&L 3D exterior designer coloured wall tiles 300x600mm design as approved over 10 mm thick rough finished rendering in cement mortar 1:4 including taking down and removal from site complete. |
| 66 | M&L for vitrified coloured tiles shade as approved 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm, in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over screed bed or bedding layers of mortars 15 mm thick in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. all as specified and directed. |
| 67 | Ditto- item above but as in vertical surfaces such as skirting/ dado over and including 10 mm thick rendering in CM (1:4) compelete. |
| 68 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed. |
| 69 | M&L glazed ceramic coloured tiles in vertical surface 450x350x7 or 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as specified & directed. |
| 70 | S&F 5mm thick Plain or frosted toughned glass for door shutters,making partitions etc. of size area exc 1.50 Sqm but n.exc 3.00 Sqm including necessary arrangements required for fixing it in position complete as specified and directed. |
| 71 | S&F 8-10mm thick Plain or frosted toughned glass for door shutters,making partitions etc. of size area exc 1.50 Sqm but n.exc 3.00 Sqm including necessary arrangements required for fixing it in position complete as specified and directed. |
| 72 | M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints and including removal of old membrane. |
| 73 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) on roof padding with water proofing compound surface finished even and smooth without using extra cement complete all as specified and directed. (Rate of WPC shall be included in unit rate) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender