Tender For special Repair To Bldg No P- 5/29 Of Ge Satwari And Provn Of Constr Of Drainage System To Prevent Extensive Water Logging At Sho (L) At Mil Stn Jammu Under Ge Satwari
Tender Value
32.52 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
2 days left
EMD
65040
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P- 5/29 Of Ge Satwari And Provn Of Constr Of Drainage System To Prevent Extensive Water Logging At Sho (L) At Mil Stn Jammu Under Ge Satwari
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Wall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified & directed. |
| 2 | Providing and fixing false ceiling at all heights with GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture with fully perforated 12 mm thick micro tegular edges, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per BS 476 (Part -4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (Galvanized @120 grams per Sqm incl both sides) comprising of Main T runners of Size 15x32 mm of length 3000mm, cross T of Size 15x32 mm of length 600 mm to form grid module of size 600x600 mm, suspended from ceiling using galvanized mild steel items (Galvanizing @ 80 grams per Sqm) i.e., 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mtr length and L-shape level adjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wood screws. The work shall be carried out as per specifications, drawing and as per directions of Engr-in-Charge. |
| 3 | Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed |
| 4 | Demolition of reinforced cement concrete of any description & from ground floor to 4th floor and removing the rubbish from the work site to outside defence premises complete all as specified and directed. |
| 5 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed. |
| 6 | M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed. |
| 7 | All as per Srl item No -06 here-in-before but except bricks complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed. |
| 9 | M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface,surface finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for preparation of new plastered surfaces of ceiling & applying three coats of white wash complete all as specified. |
| 12 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over two coats of wall care putty 1 to 2 mm thick each and one coat of primer complete all as specified and directed. |
| 13 | M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices, ceiling etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying two coats of oil emulsion distemper including making good uneven surface/holes with wall care putty where ever required.complete all as specified and directed. |
| 14 | M&L for Preparation of newly plastered surfaces on wall/ roof projections including facia, cornices etc and applying exterior water proof wall care putty @ 1 Kg(un-diluted) per sq mtr. of average thickness 1mm to 2mm over the plastered wall/ceiling surfaces, one or more coats and grinding the puttied surface with mechanical grinder for make the surface even and smooth for receiving primer and applying two or more coats of 100% premium acrylic smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & Color stay technology, Excellent dirt pickup resistance @ 1.79 litre/ 10 sqm diluted with water as per manufacturers instructions over and including priming coat of exterior primer applied @ 0.9 litre (Undiluted) / 10 sqm over new putty surfaces of wall/ceiling complete all as specified and directed. Note:-Painting to be done using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer. |
| 15 | M&L for Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500 - 2700 rpm, with internal dust extraction system for clean environment, and preparation of old plastered/scrapped surfaces of wall/ceiling by filling cracks by external wall putty/crack fill paste and applying exterior water proof wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm to 2mm over the prepared plastered wall/ceiling surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving primer and applying Two or more coats of 100% Premium acrylic smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & Color stay technology, Excellent dirt pickup resistance @ 1.79 litre/ 10 sqm diluted with water as per manufacturers instructions over and including priming coat of exterior primer applied @ 0.9 litre (Undiluted) / 10 sqm over old/new putty surfaces of wall/ceiling complete all as specified and directed. Note:-Painting to be done using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer. |
| 16 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed. |
| 17 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed. |
| 18 | S&F steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window including following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325 complete all as specified and directed. |
| 19 | S&F pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed. |
| 20 | S&F pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed. |
| 21 | M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed. |
| 22 | S&F stainless steel wire cloth 0.56mm normal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples/wooden beads complete all as specified and directed. |
| 23 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to distributed surface of walls complete all as specified and directed. |
| 24 | S&F factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification complete all as specified and directed. |
| 25 | M&L for 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 26 | S&F 35 mm thick 2nd class hard wood , glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers size of members of shutters as specified in SSR Part-I Section-8 clause 8.24 (a) fitted to chowkats complete all as specified and directed. |
| 27 | M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 28 | M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 29 | S&F 100mm long stainless steel butt hinges, fixed with screws complete all as specified and directed |
| 30 | S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed. |
| 31 | S&F aluminium anodised , fabricated type handle 150mm size complete all as spcified and directed. |
| 32 | S&F aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 33 | S&F aluminum hanging floor door stopper ,twin rubber of size 100mm, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws complete all as specified and directed |
| 34 | Dismantling floor, hearth or wall tiling/ terrazzo dado from wall surface including cement mortar bedding, (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specied and directed. |
| 35 | Dismantling of stone slabs and tiles of any description or thickness in floors, laid dry or pointed in any mortar complete all as specified and directed. |
| 36 | M&L for glazed ceramic digital coloured tiles,300x450x7 to 8 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 37 | M&L for 7 to 8mm thick coloured non skid digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed. |
| 38 | M&L for 8 to 9 mm thick vitrified ceramic double charged, edge cut, joint free, coloured or printed any shade tiles (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Note:- The tiles to be laid with 5mm thick HDPE tile spacers (horizontal as well as vertical) and gap to be grouted with epoxy upto the depth of tile. |
| 39 | M&L for 8 to 9 mm thick vitrified ceramic double charged, edge cut, joint free, coloured or printed any shade tiles (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , as in vertical surfaces such as skirting / dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note:- The tiles to be laid with 8mm thick HDPE tile spacers (horizontal as well vertical) and gap to be grouted with epoxy upto the depth of tile. |
| 40 | M&L for granite work (Z-black) 16 to 18 mm thick any colour (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 41 | S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float 32mm PVC 'L' bend and handle including brackets complete all as specified and directed |
| 42 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinging and 'P' or 'S' trap complete all as specified and directed |
| 43 | S&F in repair vitreous china wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including cast iron brackets, brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and directed |
| 44 | S&F in repair pillar taps, chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed. |
| 45 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed. |
| 46 | S&F in repair cast copper alloy, chromium plated, wall mixer non telephonic shower arrangement with connecting legs & wall flanges complete all as specified and directed.. |
| 47 | S&F in repair frameless bevelled edge mirror of selected quality glass 5mm thick of approved size, mounted on wall fixed with wooden/PVC rawl plugs with SS screws and cup washers complete all as specified and directed |
| 48 | S&F in repair bib tap with flange,long body, chromium plated, fancy type, cast copper alloy , screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 49 | S&F in repair angle valve with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted. |
| 50 | S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed |
| 51 | S&F in repair chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 52 | Taking up or down 15mm dia GI tubing and conncetions including cleaning for refixing or removal to store complete all as specified and directed |
| 53 | Taking up or down 20mm dia GI tubing and conncetions including cleaning for refixing or removal to store complete all as specified and directed |
| 54 | M&L for dismantling of water tank of capacity exc 500 but n. exc 1000 ltrs and removing complete all as specified and directed. |
| 55 | S&F Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed. |
| 56 | S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall/ceiling or laid in floors complete all as specified and directed. |
| 57 | S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall/ceiling or laid in floors complete all as specified and directed. |
| 58 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed . |
| 59 | S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed. |
| 60 | S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends complete all as specified and direced. |
| 61 | Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings and removing from site complete all as specified and directed |
| 62 | S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed. |
| 63 | S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 64 | S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed. |
| 65 | S&F UPVC (SWR) bends any radius, 75 mm bore complete all as specified and directed |
| 66 | S&F UPVC (SWR) bends with access door any radius, 75 mm bore complete all as specified and directed |
| 67 | S&F UPVC (SWR) bends any radius, 110 mm bore complete all as specified and directed |
| 68 | S&F UPVC (SWR) bends with access door any radius, 110 mm bore complete all as specified and directed |
| 69 | S&F in repair UPVC (SWR) floor trap plain with grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed. |
| 70 | Complete removal of existing water proofing treatment of any description including under layer, taking down cement plaster any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust complete all as specified and directed. |
| 71 | M&L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in padding, laid to required slope over roof finishing complete all as specified and directed. |
| 72 | M&L for water proofing treatment to roof surface (in four coat) with fibre reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110 having minimum elongation of 350%, tensile strength 2.9 MPa and shall have rack bridging ability upto 10 degree celcius to RCC roof slabs, roof treatment shall be carried out in four coats to newly plaster roof surface as per the procedure given below :-(a) Apply first coat of fibre reinforced elastometic liquid water proofing membrane as described above with 33% dilution as priming coat as directed and allow it to dry before next coating. (b) Laying second coat of fibre mesh 0.3 mm thickness weave in leno pattern having weight 45 gms per sqm and pasting it properly with overlap of 50 mm as directed and allow it to dry before next coating.(c) Apply third coat of fibre reinforced elastometric liquid water proofing membrane as described in para (a) above but undiluted @ 0.45 litre per sqm of roof surface as directed.(d) Apply fourth and final coat of fibre reinforced elastometric liquid water proofing membrane as described in para (a) above but undiluted @ 0.45 litre per sqm of roof surface as directed.(e) Work shall be carried out by the authorised applicator of manufacturer and contractor shall submit a triparty agreement MoU (between contractor ,said manufacturer and their authorities appicator ) on Non judicial stamp paper to GE and shall be approved by the GE before commecement of work at site.(f) The notice board containg following information shall be written with synthetic enamel paint on wall after completion of work:-(i) Name of work.(ii) Name of contractor.(iii) Date of commencement. (iv) Date of completion with date of warranty of ten years. |
| 73 | M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, Iintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm grith complete all as specified and driected. |
| 74 | Demolition of cement concrete (un-reinforced) ground floor and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish from the work site to out side defence premises complete all as specified and directed |
| 75 | M&L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. surfaces finished even and fair including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:2 complete all as specified and directed . |
| 76 | M&L for framed work such as grills , gratings etc with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters: walk ways , railings frame work of water tanks and similar work confirming to Fe290, Gde E-165 complete all as specified and directed |
| 77 | M&L for 75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, finishing surfaces even and fair complete all as specified and directed. |
| 78 | M&L for machine pressed chequered cement concrete tiles 30cmx30cmx25mm thick, polished with grey cement and pigment, set , jointed and pointed in neat cement slurry as in floors, laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 79 | Excavation in trenches in any type of soil, not exceeding 1.5m deep and n.exc 1.5m wide for foundation etc or manholes, piers , shafts etc not exceeding 10 Sqm on plan & not exceeding 1.5m in depth and getting out complete all as specified and directed. |
| 80 | M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in surface channel and drain complete all as specified and directed. |
| 81 | Removing excavated material to a distance n. exc 50m & depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. |
| 82 | M&L for extra for forming fair finish drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds mitred/topped ends etc complete all as specified and directed. |
| 83 | M&L for extra for forming fair finish drain or channel exceeding 30 cm but not exceeding 3.8 m inner girth in cement concrete, using extra cement, including forms, moulds mitred/topped ends etc complete all as specified and directed. |
| 84 | M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed. |
| 85 | M&L for plain cement concrete 1:2:4 ,type B0(using 12.5mm graded crushed stone aggregates) as in step, seismic and other similar bands, parapets and railing nup to 60 cm heigh, coping, apex stones, bed plates, roof padding and the like including weathering slightly rounded or chamfered angles including necessary formwork complete all as specified and directed. |
| 86 | Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells etc & making good the disturbed surfaces of walls/ceiling, matching the colour with existing surface complete all as specified and directed.Note : Rate for making good shall be deemed to be included in above item rate. |
| 87 | Taking down of unserviceable MCB DB, SPN /TPN along with MCB's complete all as specified and directed |
| 88 | Taking down of unserviceable sub main wiring of any size complete all as specified and directed |
| 89 | Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed medium grade conduit of suitable size with all accessories such as bend, reducers, MS hooks including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications. |
| 90 | All as per srl item No 89 above but One 3 pin socket outlet 6 amp independent complete all as specifieds and directed |
| 91 | All as per srl item No 89 above but One 3 pin socket outlet 6 amp same board complete all as specifieds and directed |
| 92 | All as per srl item No 89 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire. |
| 93 | S&F modular type switch, one way 6 Amps , 1 module complete all as specifieds and directed . |
| 94 | S&F modular type socket 3 pin, 6 Amps, 2 module complete all as specifieds and directed |
| 95 | S&F modular type switch, one way, 16 Amps, 1 module complete all as specifieds and directed . |
| 96 | S&F modular type socket 3 pin, 6 A/16 Amps, 2 module complete all as specifieds and directed . |
| 97 | S&F ceiling rose, surface backelite, two/ three terminal, 240 volts complete all as specifieds and directed . |
| 98 | S&F LED light fitting 1 x 18Watt, 220V, Integrated batten type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with all fixing arrengenment complete all as specified and directed. |
| 99 | S&F energy saving new generation 10W LED bulk head luminaire with opal diffuser, IP 65 and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 Hz complete all as specified and directed. |
| 100 | S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 230 Volts,8 ways with 100 amps rated copper bus bar complete all as specified and directed |
| 101 | S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 230 Volts,12 ways with 100 amps rated copper bus bar complete all as specified and directed |
| 102 | S&F MCB SPN, 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed . |
| 103 | S&F MCB SPN, 40 to 63 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed . |
| 104 | S&F MCB Single pole, 6 to 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed . |
| 105 | S&F Submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathed FRLSH copper wire 6 Sqmm for continous earth wire drawn into and including concealed PVC conduit of suitable size complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length) |
| 106 | Taking down ceiling fan of any size , dismantling blades and removing fan for depositing in MES Store Yard complete all as specified and directed . |
| 107 | S&F ceiling fan complete with blades,clamp, hooks,down rod and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) with compatible regulator and fixing of hooks by anchor fastner including connecting from ceiling rose/connector with & including flexible copper cable of suitable size complete all as specified and directed |
| 108 | S&F lamp holder,PVC /Polycarbonate type with back plate for batten fittings complete all as specifieds and directed . . |
| 109 | S&F in replacement LED lamp of capacity 07 Watt suitable for B22 holder complete all as specifieds and directed . |
| 110 | M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed .. |
| 111 | Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 25 Sqmm, 2.0 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately. |
| 112 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm any type of soil complete all as specified |
| 113 | M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment. |
| 114 | M&L for factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed. |
| 115 | S&F Galvanised steeI tubing, light grade, 40mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender