Tender For Repair/ Maintenance Of Pump Set, Rising/ Distribution Pipe Line, Development Of Borewell And Misc Works At City Area Under Ge Alwar
Tender Value
85 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
12 days left
EMD
1.53 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Pump Set, Rising/ Distribution Pipe Line, Development Of Borewell And Misc Works At City Area Under Ge Alwar
BOQ
| Sl. No. | Item Description |
| 1 | Taking out submersible pump set of any make, any type, any capacity & at various locations from the bore well including column pipe & cable and lowering the same in bore well after inspecting ,checking & repairing by mechanical means/manually and testing, complete, all as specified & directed. |
| 2 | Dismantling of submersible pump electric driven of any make, any type & any capacity and cleaning, overhauling and repairing by necessary machining & welding work including minor spares and replacement of unserviceable spare parts and reassembling the components & testing for its function ability, complete all as specified & directed.Notes :- (i) The spare parts required to be replaced shall be measured and paid for separately as “Supply only” under the relevant items here-in-after. |
| 3 | Dismantling of submersible electric motor 3 phase, 440 Volt, any make, any type & any capacity and cleaning, overhauling and repairing by necessary machining & welding work including minor spares and replacement of unserviceable spare parts and reassembling the components & testing for its function ability, complete, all as specified & directed.Notes :- (i) The spare parts required to be replaced shall be measured and paid for separately as “Supply only” under the relevant items here-in-after. |
| 4 | M&L for taking out the burnt winding and rewinding of submersible electric motor AC 3 Phase 400/440 Volts, of required RPM, of any make & any type with new PVC coated super enameled copper wire of same existing gauge including insulation material and cable jointing and testing at site complete for the following capacity of motors :- (a) 10/12.5 HP |
| 5 | (b) 15 HP NOTE:- Rectification period for submercible pump set should not be more than 72 Hrs from the time of intimation to the contractor, failing in which panalty of Rs. 1000 on each day shall be made to the contractor. |
| 6 | Supply only following spare parts suitable for submersible pump including motor of 10/12.5 HP capacity as directed by Engineer-in-Charge :-(a) Motor thrust plate |
| 7 | (b) Motor thrust bearing |
| 8 | (c ) Bearing bush for motor housing Upper/Lower G.M |
| 9 | (d) Motor oil seal |
| 10 | (e) Stage Casing C.I. |
| 11 | (f) Pump Shaft high carbon steel of same make of pump manufacture. |
| 12 | (g) Diffuser PTMT with fixing screw |
| 13 | (h) Distance outlet casing |
| 14 | (j) NRV body |
| 15 | (k) Impeller PTMT KB 100 |
| 16 | (l) Flange stud with nut & bolts |
| 17 | (m) Motor stud with nut & bolts |
| 18 | (n) Pump strip |
| 19 | (o) SS Sleeve for Rotor |
| 20 | (p) Bottom Housing |
| 21 | (q) Impeller Neck Ring |
| 22 | (r ) Guide / Distance Bush |
| 23 | (s) Coupling for motor pump |
| 24 | (t) Motor sand Guard |
| 25 | (u) Impeller Key |
| 26 | (v) Aluminium Strainer |
| 27 | (w) Disc PVC |
| 28 | (x) Adjusting Bolt |
| 29 | (y) Top Bush Sleeve Set |
| 30 | (z) Bottom bush Sleeve Set |
| 31 | (aa) Cable Seal |
| 32 | (ab) Drain Plug GM |
| 33 | (ac) Repair to stator slot complete all necessary arrangment . |
| 34 | (ad) Rotar suitable for 12.5/15 HP Submersible pump |
| 35 | (ae) Stator with winding suitable for 12.5/15 HP Submersible pump |
| 36 | M&L for taking out the burnt winding of electric motor of submersible mono pump 3 phase 430 Volt 10/ 12.5 HP and rewinding the same with PVC coated new super enamelled copper wire of same gauge and with equal number of turns including insulation material and reassembling the motor including testing, complete, all as specified & directed. |
| 37 | Dismantling of submersible mono pump of 10 / 12.5 HP capacity, 3 phase, 430 Volt, any make, any type and cleaning, overhauling and repairing by necessary machining & welding work with & including replacement of unserviceable spare parts such as ball bearing, oil seal, gland bush, minor spares and reassembling the components & testing for function ability, complete, all as specified & directed. |
| 38 | Dismantling of submersible mono pump of 5 / 7.5 HP capacity, 3 phase, 430 Volt, any make, any type and cleaning, overhauling and repairing by necessary machining & welding work with & including replacement of unserviceable spare parts such as ball bearing, oil seal, gland bush, minor spares and reassembling the components & testing for function ability, complete, all as specified & directed. |
| 39 | M&L for taking out the burnt winding of electric motor of submersible mono pump 3 phase 430 Volt 5 / 7.5 HP and rewinding the same with new super enamelled copper wire of same gauge and with equal number of turns including insulation material and reassembling the motor including testing, complete, all as specified & directed. |
| 40 | S&F 10 sqmm multistranded copper conductor, 3 core PVC insulated and sheathed copper screen protected 1100 Volts grade submersible flat cable fixed to column pipes with suitable clamps & jointing material complete including disconnecting & taking out old unserviceable cable. |
| 41 | S&F in repair 6 sqmm multistranded copper conductor, 3 core PVC insulated and sheathed copper screen protected 1100 Volts grade submersible flat cable fixed to column pipes with suitable clamps & jointing material complete including disconnecting & taking out old unserviceable cable. |
| 42 | S&F Digital Voltmeter 96mm x 96mm (Square Type) 0-500 Volts including taking down old unserviceable voltmeter. |
| 43 | S&F Digital Amp meter 96mm x 96mm (Square Type) 0-30 Amps including taking down old unserviceable Amp meter. |
| 44 | S&F Gun metal ball valve with MS handle 40mm dia, ISI marked, including taking out old unserviceable ball valve. |
| 45 | Supply & fixing the following items for repair to existing unserviceable star delta starter / control panel for submersible pump set/mono block pump set to make fully functional including taking out old unserviceable items :-(a) Mini contactor with screw connection, 3 pole, AC operated, 16 Amp |
| 46 | (b ) Mini contactor with screw connection, 3 pole, AC operated, 20 Amp |
| 47 | (c) No volt coil 200/240 Volt 50 Hz |
| 48 | (d) No volt coil 380/415 Volt 50 Hz |
| 49 | (e) Thermal overload relay, range 10 to 14 Amp |
| 50 | (f) Thermal overload relay, range 15 to 19 Amp |
| 51 | (g) ON-delay electronic timer, 220-230 V AC of required time range |
| 52 | (h) ON-delay electronic timer, 110-130 V AC of required time range |
| 53 | (i) Single phase preventor 230 volt |
| 54 | S&F MCB TPN 63 Amps 10 kA 415 Volts AC 50 Hz including taking down old unserviceable MCB. |
| 55 | M&L for 50 mm bore GI medium grade column pipe in 6 metre length with GI flanged joints duly screwed and welded with pipe & lowering in bore well all including, providing slot/groove for submersible cable, bolts, nut, rubber packing,GI flanges etc all as required & directed, including taking out old column pipe, complete. |
| 56 | Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc or for laying of cables, pipes etc and getting out in soft/loose soil complete all as specified. |
| 57 | Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc or for laying of cables, pipes etc and getting out in hard /dense soil complete all as specified. |
| 58 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil. |
| 59 | Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified. |
| 60 | Taking up or down unserviceable/damaged/rusted steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. |
| 61 | Taking up or down unserviceable/damaged/rusted steel water tubing and connections of 25mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. |
| 62 | Taking up or down unserviceable/damaged/rusted steel water tubing and connections of 40mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. |
| 63 | Taking up or down unserviceable/damaged/rusted steel water tubing and connections of 50mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. |
| 64 | Taking up or down unserviceable/damaged/rusted steel water tubing and connections of 80mm bore, fixed in, trenches etc. all as directed. |
| 65 | Taking up or down unserviceable/damaged/rusted steel water tubing and connections of 100mm bore, fixed in , trenches etc. all as directed. |
| 66 | M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete laid in trenches. |
| 67 | M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 68 | M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete laid in trenches. |
| 69 | M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 70 | M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete laid in trenches. |
| 71 | M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings complete laid in trenches. |
| 72 | M&L for galvanized steel water tubing medium grade of 80mm bore with & including all fittings complete laid in trenches. |
| 73 | M&L for galvanized steel water tubing medium grade of 100mm bore with & including all fittings complete laid in trenches. |
| 74 | Supply and fixing DI fittings ,specials (K-12) such as bends ,tapers, collars, reducers,caps, tee pieces (single/double branch) any type ,angle/radius and straight connecting pieces etc. (ISI Marked) confirming to IS- 9523 for flange/socket and spigot ends suitable for DI pipe upto 150 mm bore complete all as specified an directed. |
| 75 | M&L for connection GI pipe dia 80/100 mm to existing CI/DI pipe in position for branch connection upto 80/100 mm dia pipe including fittings ,clamps and rubber locking etc. complete all as specified and directed. |
| 76 | Taking up existing GI pipe 20 to 50 mm bore from different locations any length in maintenance and after cleaning of pipe(blockage ) laying at same location ,including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed. |
| 77 | Taking up existing GI /DI/CI pipe 80 to 150 mm bore from different locations any length in maintenance and after cleaning of pipe, laying at same location ,including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed |
| 78 | Supply and fixing in repairs GI Tee of 80mm bore (ISI marked) ,including cutting of pipe & rethreading ,all as specified & as directed. |
| 79 | Supply and fixing in repairs GI Tank Nipple of 80mm bore (ISI marked) all as specified & as directed. |
| 80 | Supply and fixing in repairs GI Union of 80mm bore (ISI marked) ,including cutting of pipe & re threading all as specified & as directed. |
| 81 | Supply and fixing in repairs GI Tee of 100 mm bore (ISI marked) ,including cutting of pipe &rethreading all as specified & as directed. |
| 82 | Supply and fixing in repairs GI Nipple of size 80 mm bore & 100 mm long (Class ‘B’),including cutting of pipe & rethreading all as specified & as directed. |
| 83 | Supply and fixing in repairs GI Nipple of size 80 mm bore & 150 mm long (Class ‘B’) ,including cutting of pipe & rethreading all as specified & as directed. |
| 84 | Supply and fixing in repairs GI Nipple of size 100 mm bore & 100 mm long (Class ‘B’) ,including cutting of pipe & rethreading all as specified & as directed. Please Enable Macros to View BoQ information |
| 85 | Supply and fixing in repairs GI Nipple of size 100 mm bore & 100 mm long (Class ‘B’) ,including cutting of pipe & rethreading all as specified & as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender