Tender For Periodical Services (Internal & External) Incl Repair To Plastering, Facia / Chajja Repair Etc In Various Locations In North Zone Under Ge (N) Binnaguri
Tender Value
1.45 Crore
Estimated cost
Bid Submission
08 Sep 2026
23 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services (Internal & External) Incl Repair To Plastering, Facia / Chajja Repair Etc In Various Locations In North Zone Under Ge (N) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on wall of any desription incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | Supply only liquid water proofing compound conforming to IS : 2645-1975 specifications, complete all as specified and directed. |
| 3 | S&F steel work in tubular trusses MS pipes in vertical column,parlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 of 1979 grade st 240 with one shop coat Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet not less than 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including demolision of sheet, complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 including, surface even & smooth without using extra cement, complete all as specified and as directed. |
| 6 | M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm thick & 05 mm thick each) mixed with water proofing compound in top layer 200ml per beg of cement or as per manufacturer's instructions finishing the surface fair & even complete all as specified and as directed.(Note: WPC shall be measured and paid separately as supply only under relevent item.) |
| 7 | M&L for rendering 5 mm thick in CM 1:3 as in ceiling and fair finished without using extra cement complete all as specified and directed. |
| 8 | M&L for preparation of old treated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down with water and applying two coats of white wash to wall complete all as specified and as directed. |
| 9 | M&L for preparation of newly plasterd surface of wall and applying two coas of colour/white wash to match the colour of existing adjecent surface all as specified as directed. |
| 10 | M&L for preparing of old surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment and preparation of internal wall surfaces with one coat wall putty and applying two coats of distemper oil emulsion complete all as specified and directed . |
| 12 | M&L for preparation of new plastered surfaces on wall / ceiling / chajjas including using putty/sufacer as required basis to address undulations and obtain smooth surface and applying Two or more coats of premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priiming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. |
| 13 | M&L for complete removal of existing treatment for preparation of old decorated treatment on wall / ceiling / chajjas by scrapping with true care wall sander to make the surface free from dust, loose paints etc sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete including using putty/sufacer as required basis to address undulations and obtain smooth surface and applying Two or more coats of premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priiming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. |
| 14 | M&L for preparation new internal wall surfaces with one coat wall putty and applying two coats of distemper oil emulsion complete all as specified and directed . |
| 15 | M&L for preparation of old treated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down with water and applying one coats of white wash to ceiling complete all as specified and as directed. |
| 16 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 17 | M&L for preparing of old painted wood and wood base surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paints (1st grade quality) complete all as specified and directed. |
| 18 | M&L for preparing of old painted steel and steel base surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paints (1st grade quality) complete all as specified and directed. |
| 19 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed. |
| 20 | M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed. |
| 21 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 22 | M&L for waterproof cement based putty of average thickness 1 mm and sand papering surcaces to achieve smooth surfaces over new plastered surface on wall / ceiling / chajjas after preparation of surface and applying two coats of distemper acrylic emulsion of approved tint over a coat of alkaline resistant primer with roller including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed. |
| 23 | M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets, bed block, copings, filling concrete, gaps in between glazed & fly proof steel window, cills, railling up to 60 cm in height, in roof kerbs or mud stops, rounded or chamfered on edges, padding to roof etc including necessary form work and demolition/dismantling as required all complete including demolition and as specified and directed. |
| 24 | M & L for preparation of surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement whereever required to fill the wall cracks/holes complete all as specified and directed. |
| 25 | M&L for complete removal of existing treatment for preparation of old decorated treatment on wall / ceiling / chajjas and applying waterproof cement based putty of average thickness 1 mm and sand papering surcaces to achieve smooth surfaces over surface on wall / ceiling / chajjas after preparation of surface and applying two coats of distemper acrylic emulsion of approved tint over a coat of alkaline resistant primer with roller including washing froors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed. |
| 26 | M & L for preparation of surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coats of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement wherever required to fill the wall cracks/holes complete all as specified and directed. |
| 27 | S & F 110mm bore PVC (SWR) pipes, type 'A',single socketed confirming to IS- 13592:1992) in any length with rubber ring joints laid in trenches or in floor complete all specified and directed. |
| 28 | S & F 75mm bore PVC (SWR) pipes, type 'A',single socketed confirming to IS- 13592:1992) in any length with rubber ring joints laid in trenches or in floor complete all specified and directed. |
| 29 | S & F for 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 30 | S & F for 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 31 | S & F for 110/75 mm bore PVC (SWR) cowl of any radius complete all as specified and directed.Note: (i) The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.(ii) The contractor shall purchase / procure all types of paints in full quantities to be ascertained by Engineer-in-Charge prior to commencement of work and the same will remain safe custody of Engineer-in-Charge and to be issued to contractor as and when require with consent of GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender