Tender For Repair To Footpath And Curve Stone Of Various Roads, Repair To Road Of Various Units In The South Zone Area And Repair To Road At Various Units In The North Zone Area Under Ge Dipatoli.
Tender Value
93.82 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
12 days left
EMD
1.65 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Footpath And Curve Stone Of Various Roads, Repair To Road Of Various Units In The South Zone Area And Repair To Road At Various Units In The North Zone Area Under Ge Dipatoli.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc. complete all as specified and directed. |
| 2 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Demolition of Reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | M&L Cement Concrete 1:4:8 (40mm graded aggregate) in Foundations, Filling and Mass Concrete including use and waste Formwork as ordered/required at Site completed all as specified and directed. |
| 5 | M&L fly ash Brick Work with Sub-Class ‘B’ Bricks (with modular Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6 complete all as specified and directed. |
| 6 | M&L fly ash Brick Work with Sub-Class ‘B’ Bricks (with modular Size Bricks), half brick thick on wall built in cement Mortar 1:4 complete all as specified and directed. |
| 7 | M & L for PCC 1:3:6 type C-1 using 20MM graded aggreagte as in coping bed block etc complete all as specified and directed. |
| 8 | M & L for rendering in cement mortar (1;4) 15MM thick on concrete /brick masonry wall surfaces, finished even and smooth using extra cement complete all as specified and directed. |
| 9 | M&L for providing Pre-cast cement concrete1:2:4 block masonary with solid blocks, exc 10 cm in width and setting in morter 1:4 complete all as specified and directed. |
| 10 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 11 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 12 | M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 13 | M&L Pre-cast Reinforced Cement Concrete type B1 1:2:4 (20mm graded aggregate) in Cover Slab etc., set in Cement Mortar 1:4 complete all as specified and directed.NOTE : Reinforcement will be Measured and Paid separately under appropriate Items. |
| 14 | M&L TMT Bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed. |
| 15 | M&L three coat of white wash on wall surface including preparation of surface complete all as specified and directed. |
| 16 | Repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, water, scoring sunken surface in roads, paths etc cutting arround edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming including with supply of road metal complete all as specified and directed. |
| 17 | Preparing the black top surfaces of roads by brushing with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surface with gunny bags to remove all loose dirt etc complete all as specified and directed. |
| 18 | M & L for applying evenly a priming/ tack coat with paving bituminous primer @ 5 kg/ 10 Sqm Grade VG-30 laying forcarriagewaly only complete all as specified and directed. |
| 19 | M & L for semi dense bituminous concrete 40mm (compacted thickness) using graded cushed stone aggregate premixed with binder (paving grade bitumen VG-30 grade) @ 5.5% by weight of total mix & hydraulic lime filler, rolled the surfaces by using 8 to 10 ton capacity power roller and compacted to required camber and gradient complete all as specified and as directed.Note :- (i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(ii) The exact bitumen content required shall be detrmiend following the Marshall Mix Design procedure contained in the Asphalt Insitute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. |
| 20 | M&L Premix bituminous macadam laid/rolled and compacted to required gradient and camber with paving bitumen VG-30 with 4% binder content by weight of total mix with 8 to 10 ton powder roller (consolidated thickness not more than 75mm) required complete all as specified and directed. |
| 21 | M&L for preparing bituminous surface of road and marking 1.5mm thick centre lines, stop lines, dashes, arrows etc and the like n exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed. |
| 22 | Supply and fixing cat eye solar rflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of Model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 23 | Supply and fixing solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battry (1.2V/1600MA) consisting of supper bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed. |
| 24 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 25 | Demolition of cement concrete in ground floors and paving n.exc 15cm thickness below or above ground level complete all as specified and as directed. |
| 26 | Dismantling stone sett paving of laid dry and pointed any description or thickness complete all as specified and directed. |
| 27 | supplying and fixing for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compating and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required sixe and pattern, finishing and sweeping extra sand complete including all as specified and directed. |
| 28 | Material & Labour for plain cement concrete type B1, 1:2:4 (20mm graded crushed stone aggregate) as in coping, bed block, water trought and similar works including rounding, chamfered and throating complete all as specified and directed. |
| 29 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, exc 50mm and n.exc 100mm deep complete all as specified and directed. |
| 30 | Screening road metal, chippings, etc on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measring (materials from both sides of screen measured) complete all as specified and directed. |
| 31 | M&L 75mm thick, compacted thickness WBM with coarse aggregates granite, trap or basalt stone of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled the surfaces by using 8 to 10 ton capacity power roller to consolidated thick to meet gradient and required camber complete all as specified and directed. |
| 32 | All as per item No 31 but except materials complete all as specified and directed. |
| 33 | M &L Preparing WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying paving bitumen evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre complete all as specified and directed. |
| 34 | M & L for Providing and marking broken centre line/side lines on road pavement by applying 1.00mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directedand by the Engr-in-Charge. Note :- thermoplastic paint hot applied with machine conforming to BS-3262 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001(4th revision) complete all as specified and directed. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender