Tender For Addn / Altn And special Repair To Bathroom Blocks (T-26 & T-27) Of Ncc Complex At Bmc Under Ge (C) Kolkata
Tender Value
36.96 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
11 days left
EMD
73924
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn / Altn And special Repair To Bathroom Blocks (T-26 & T-27) Of Ncc Complex At Bmc Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: ADDN / ALTN AND SPL REPAIR TO BATHROOM BLOCKS (T-26 & T-27) OF NCC COMPLEX AT BMC UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Dismentling of GI (corrugated, semi corrugated) sheet in roof covering incl ridges complete all as specified and directed |
| 3 | Dismentling wall and ceiling board (fibre, pulp, insulation) any thickness incl. cover fillet complete all as specified and directed |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 5 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 6 | Taking down cement plaster of any description on brick work or stone msonary wall including racking of joints hacking for key scrubbing down with water etc. complete all as specified and directed |
| 7 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm each complete all as specified and directed |
| 8 | All as item No. 06 here in before but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 9 | Demolition of plain concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed |
| 10 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 11 | Demolition and breaking up 150mm bore drain pipes (salt glazed ware, AC or reinforced concrete ) set in cement mortar haunching and bedding complete all as specified and as directed. |
| 12 | Taking up or down steel tubing 15mm dia and connection of 15mm bore complete all as specified and directed |
| 13 | All as per item No. 11 here in before but 20mm dia bore. |
| 14 | Material and labour Plain cement concrete Type D2 (1:4:8) (using 40mm graded stone agreegate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 15 | M&L Rolled Mild Steel Work in Tubular /hollow section as trusses, purlin , rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923 grade YSt.-240 complete all as specified and as directed. |
| 16 | S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290 Gde-E165) complete all as specified and directed. |
| 17 | S&F, in repair, vitreous china squatting pan orrissa pattern size 580x440mm white with intregal foot rest including connection to trap, and flusing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified. |
| 18 | S&F in repair half stall urinal with 40mm PTMT waste coupling and PTMT spreader (excluding 32mm waste pipe) complete all as specified and directed |
| 19 | M&L RCC (Nominal Mix) 1:1 1/2 :3 type A-1 (Using 12.50mm graded stone aggreagate) as in slab, shelves, Chajja supported on walls beam & coloumns in floor roof including balconies, conopies, deck slabs & shelves complete all as specified and directed.Note: (i) Reinforcement and formwork shall be measured and paid separately under relevant item of these schedule. |
| 20 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone agg as in bed blocks/hold fast complete all as specified and directed |
| 21 | Use and waste of Formwork for rough finished surfaces to sides of soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams etc for rough finished surfaces complete all as specified and directed |
| 22 | M&L Brick work with fly ash pulverized bricks of designation 75, class 'A', straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 23 | All as per item No 21.00 but except brick complete all as specified and directed |
| 24 | M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier \\"Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd\\" or \\"Hind Styrene BR of Hindcon Chemical Ltd\\" or equivalent of M/s Pidilite Industries /Icannano @ 7 Litre per bag of cement complete finished even and smooth without using extra cement complete upto 4 storey height all as specified and as per manufacturer's specification. |
| 25 | S&F for Mild Steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 26 | Supply and fix TMT steel bars 6mm dia and over and upto 10mm dia bars as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 27 | S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed. |
| 28 | S&F Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming Fe-290 Gde E 165 complete all as specified and directed. |
| 29 | M&L for Pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:-Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate. |
| 30 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed. |
| 31 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed. |
| 32 | S&F Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, fixing in frame at site complete all as specified and directed. |
| 33 | Material & labour of 1.50mm thick power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, anodised aluminium snap beading screws etc. inluding glazing with 4.8 mm thick tinted glass to aluminium frame work using rubber gasket where the section of frame and shutter and Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. glazing clip, fastener etc Complete all as specified and as directed.Note :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. |
| 34 | S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size (average) of window 600X450mm and glazing with 4.8 mm thick frosted glass to aluminium frame work using rubber gasket where the section of frame and shutter complete with following specification. (a) Alu frames of size 45x45x1.5mm (b) Rail & Stile 45x45x1.5mm thick (c) 4.80mm thick frosted sheet glassNote:- All ventilators/louvers member including fitting & fixture shall be deemed to included quoted rate. For measurement, opening size of ventilators/louvers shall be considered. |
| 35 | S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed |
| 36 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed |
| 37 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed |
| 38 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 39 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed |
| 40 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed. |
| 41 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed |
| 42 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screw complete all as specified and directed |
| 43 | M&L False ceiling with 'E' board \\"Classic\\" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 35mm x 23mm x 1.50mm cross tee 35mm x 23mm x 1.50mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides duly suspended with 4mm dia GI hanger fixed with GI hooks 4mm dia and fastner as required at the site and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete all as specified and as directed. |
| 44 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 45 | M&L Cement Concrete type D2(1:4:8) using 40mm graded crushed stone aggregate 75mm thick as in sub base of floor complete all as specified and as directed. |
| 46 | M&L 25mm thick PCC (1:2:4) base type B-0 (using 12.50mm graded stone aggregate) as in base complete all as specified and directed. |
| 47 | M&L Plain Cement Concrete type B-0, (1:2:4) (12.5mm graded crushed stone aggregate) as in copings, benching etc complete all as specified and as directed. |
| 48 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 49 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 50 | M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed |
| 51 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 52 | M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smooth without using extra cement complete all as specified and directed |
| 53 | \\"Supply only\\" liquid water proofing compound (ISI marked) complete all as specified and directed.Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA |
| 54 | M&L complete removal of existing treatment of wall and preparing old surface and applying 2 coat of oil bound distemper over a coat of primer including approx 1.5mm thick water based putty complete all as specified and directed. |
| 55 | M&L preparing newly plastered surfaces of wall and applying 2 coat of oil bound distemper over a coat of primer including approx 1.5mm thick water based putty complete all as specified and directed. |
| 56 | M&L complete removal of old decorated surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Two or more coats applied @ 1.43 ltr/10 sqm) over and including priming coat of exterior primer (applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 57 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Two or more coats applied @ 1.43 ltr/10 sqm) over and including priming coat of exterior primer (applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 58 | M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 59 | M&L for preparation of new surfaces of steel and steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 60 | S&F for 20mm outer diameter CPVC pipes SDR 11 & including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 61 | S&F for 25mm outer diameter CPVC pipes SDR 11 & including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 62 | M&L Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good (cutting not exc 10Cm girth) complete all as directed |
| 63 | S&F triple layer PVC water tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000Ltr with and including ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 25mm bore outer diameter for CPVC pipe and making connection for inlet and outlet including dismental of old water tank and removing from site complete all as specified and directed |
| 64 | S&F triple layer PVC water tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 2000Ltr with and including ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 25mm bore outer diameter for CPVC pipe and making connection for inlet and outlet including dismental of old water tank and removing from site complete all as specified and directed |
| 65 | Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, white colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 66 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed. |
| 67 | S & F in repair for 15mm bore brass chromium plated Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 68 | M&L for 25mm thick prepolished coloured PCC chequred tiles of size 400x400x25mm set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20mm thick screed bed in CM 1:6 complete all as specified and directed |
| 69 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC and making good disturbed area complete all as specified and as directed. |
| 70 | M&L 150mm dia Reinforced concrete pipe, class NP-3, laid and jointed with collars complete all as specified and directed |
| 71 | M&L for Concrete bed Type C-2 (1:3:6) (Using 40mm graded crushed stone aggregate) to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed |
| 72 | S&F in repair UPVC (SWR) bend any radius 110mm bore complete all as specified and directed |
| 73 | S&F UPVC (SWR) 110mm bore vent cowls complete all as specified and as directed. |
| 74 | S&F UPVC (SWR) 110mm bore Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors as in repair complete all as specified and directed. |
| 75 | S&F UPVC (SWR) 110mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors as in repair complete all as specified and directed. |
| 76 | S&F in repair PVC (SWR) Pipe 110mm bore (dia), Type 'B' single socketed, in any length with Rubber Ring Joints fixed to Walls, ceilings and floors with pvc clamps complete all as specified and as directed. |
| 77 | M&L Hardcore (broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 78 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 79 | M&L for Morrum / red bejri filling in floor or paving, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 80 | M&L diameter of outlet 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed |
| 81 | S & F, in repair, 15mm bore brass chromium plated fancy type Angular Valve with Wall Flange complete all as specified and directed. |
| 82 | S & F, in repair, brass chromium plated Fancy Type Bib taps for 15 mm bore pipe complete all as specified and directed. |
| 83 | S & F, in repair, brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed. |
| 84 | S&F, in repair, ABS Body chrome plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 85 | S & F, in repair, shower arm 240mm long round shape with flage including fixing to steel pipe or union complete all as specified and directed. |
| 86 | S & F, in repair, 600mm long Towel Rail chromium plated 20mm dia fixed with screw complete all as specified and directed. |
| 87 | S&F, in repair, Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers , complete all as specified and as directed. |
| 88 | S & F, in repair, chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer). Complete all as specified and directed |
| 89 | S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 90 | S&F in repair for brass chromium plated fancy type pillar tap screwed for 15mm bore pipe complete all as specified and directed |
| 91 | S&F, in repair, 600mm dia RCPC mahole cover with reinforced concrete lid of capacity 5MT including haunching against the side of lid with plain cement concrete type C-2 (1:3:6) (using 40mm graded curshed stone aggregate) complete all as specified and directed |
| 92 | Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc. including cleaning all and specified and directed. |
| 93 | M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including factory made GI sunken box fixed flush with wall surface with plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly includingCutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.Note : Cost of cutting chases, making good and finishes shall be deemed to be included in quoted rate |
| 94 | All as per item No 92.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge. |
| 95 | All as per item No. 92.00 here-in-before but one 3 pin 5 amps switch socket outlet on the independent board with other switch complete all as specified and directed by Engineer-in-charge. |
| 96 | All as per item No.92.00 mentioned here-in-before but using 2.5 sq mm size multi stranded copper conductor cable for one 16Amp switch, socket outlet point on independent bord complete 2.5 sqmm PVC insulated and unsheathed copper condutor earth continuity conductor to common earth and connecting to earh dolly as specified and directed by Engineer in charge |
| 97 | S&F switch piano flush type, single pole one way, 6 Amp complete all as specified and directed |
| 98 | S&F switch socket combination 2 in 1 3 pin switch socket outlet 5A on independent board complete all as specified and directed by engineer -in-charge |
| 99 | S&F socket outlet 2 in 1, 3 pin 5 Amps on the same board with other switch complete all as specified and directed by engineer in charge |
| 100 | S&F Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. |
| 101 | S&F Energy efficient LED fittings of capacity 10W wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed. |
| 102 | S&F Energy efficient LED fittings of capacity 20W batten type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed. |
| 103 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 4 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection and dismantling or taking down old cable complete all as directed by the Engr-in-Charge. |
| 104 | S&F LED fittings with lamps 35 watts for bldg security light IP-66 power coated pressure die cast aluminium compact high power LED street light with compact size and rough design 32mm GI bend including taking down one as specified and directed |
| 105 | Materials and Labour Cutting existing road / path etc for taking out cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 ( 1:3:6,) using 40mm graded crushed stone aggregates) of suitable depth complete all as directed by Engineer-in-Charge. |
| 106 | S&F Sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 107 | S&F MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve breaking capacity 10 kA complete all as specified and as directed. |
| 108 | S&F MCB 32 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed. |
| 109 | Supplying , installing and commisioning electric storage water heater of capacity 25 ltrs and wattage 2kW having temperature range upto 75 degree celcius with temp control knob and display of different temp setting control with working pressure upto 8 bar having 5 star rating as pr IS 2082 reheating time less than 60min shock proof high density PUF insulation, glass lined inner tank material, having warranty 7years on tank min 4 years on heating element and 2 years on other spare parts including following spare partsa) capillary type thermostatb) knob + temp displayc) multifunctional valved)magnesium anode including chromium plated connection pipe of length not less than 60cm for hot and cold water connection complete including making good to the disturbed surfaces of the wall as per existing finish all as specified and directed. |
| 110 | S&F exhaust fan, steel body AC single phase 230V of size 300mm sweep with blades, and frame and louvers complete including cutting on wall of required dia for fixing of exhaust fan making good as per existing surface complete all as specified and directed |
| 111 | M&L DWC pipe of inner dia 50mm, outer dia 63mm including all fittings such as couplers, bends, Tee etc laid in trenches complete all as specified and directed |
| 112 | S&F single pole and neutral enclosures with a two pin and earth, plug and socket complete with one single pole MCB 240V 20A including good to the disturbed surfaces of the wall as per existing finish complete all as specified and directed |
| 113 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc and getting out as in Soft/Loose Soil for laying of water supply pipe line/UG cable complete all as specified and as directed. |
| 114 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed. |
| 115 | Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed. |
| 116 | Supply and laying 50mm bore GI pipe medium grade with all fittngs in trenches all as specified and directed. |
| 117 | Supply and laying 25mm bore GI pipe medium grade with all fittngs in trenches/floor/roof/wall all as specified and directed. |
| 118 | S&F 25 mm bore Gun metal gate valve as per IS : 778-84, marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed. |
| 119 | S&F stop, gun metal glove or gate valve with iron wheel head, screwed both ends for iron pipe and fixed incl taking down old unsv complete 50mm (2.0\\") dia pipe complete all as specified and directed Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender