Tender For Repair/Maint Of Leakage/Seepage From Roof In Certain Building At Tech Area At 3 Brd Af Stn Under Ge (Af) Mc Chandigarh
Tender Value
45 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
4 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Leakage/Seepage From Roof In Certain Building At Tech Area At 3 Brd Af Stn Under Ge (Af) Mc Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick tiles or terracing tiles, single layer on roof and removal of unserviceable brick tiles / brick bats of rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed. |
| 2 | Taking down existing bitumen felt including cement mortar bedding padding and cleaning the surface and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed. |
| 3 | Demolition of mud in roof, any thickness, including plastering and leaping (whether full thickness removed only a part thereof) and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed. |
| 4 | M&L for PCC 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) as in padding on roof laid in 50mm thick average required thickness to maintain desired slope, finished even and fair without using extra cement, complete all as specified and directed. |
| 5 | Material and labour for rendering 15mm thick in cement mortar (1:3) using WPC @ 200ML per 50Kg bag of cement on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed.Note :- WPC shall be measured and paid separately. |
| 6 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-charge. |
| 7 | Material and Labour for 40mm thick brick tiles laid over and including 15mm thick cement screed bed in cement mortar (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all as specified and directed. |
| 8 | M&L for cleaning the surface before final treatment on roof as specified, applying the double layer of glass fibre mesh of 60 GSM over the roof using poly plastic fibre adhesive mix/Eazeecoat Ultra mix in the following manner :-(a) Making poly plastic fibre adhesive mix/Eazeecoat Ultra mix by adding polyplastic fibre adhesive/Eazeecoat Ultra and white cement in equal proportion and add 25% water in it to make the mixture per manufacturer instructions. (b) The double layer of fibre mesh to be spread on the roof & apply two coat of above mixture of poly plastic fibre adhesive/Eazeecoat Ultra with a roller & brush to cover the fibre mesh throughouly. (c) Process of roof lamination :- Lamination/top coat on the roof using poly plastic fibre coat/Eazeecoat Ultra with white cement & water as per manufacturer instructions. Top coat is ammonia free, w/o any harmful effects & is flexible in nature. (d) Minimum thickness of the treatment shall be 2mm.Make : Nerolac Perma / European Paints & Chemicals / Ever paint. |
| 9 | All as per item No. 8 here-in-before but as in chajjas. |
| 10 | M&L for removal of paint/putty etc from the wall using mechanical means as per manufacture instructions. Hacking of existing plastered surfaces upto 2mm.Note:- The wall treatment shall be done on hacked/new cementious surface for proper bonding & requsite results surface to be treated shall be passed by Engr-in-Charge.(a) Take Poly plastic fibre adhesive/ Eazee Coat Ultra, white cement in equal proporation & add 25% water in it to make the mix as per manufacturer instructions. Apply 2 coats of wall bind adhesive mixture to the wall using a roller & brush.(b) Final & top coat apply with mixing ratio of poly plastic fibre/ Eazee Coat Ultra top coat & water & white cement as per manufacturer instructions.Note:- The poly plastic fibre/ Eazee Coat Ultra should have following characterstics:-(a) Resists positive hydrostatic presure of upto 14 bars.(b) Crack filling ability upto 45mm.(c) Temp control upto 14 degree celcious on any surface like concrete roof, metal shed & for walls also.(d) High durablity to water, fire & UV rays covering climate condition to + 55 degree celcious.Make : Nerolac Perma/ European Paints & Chemicals/ Ever Paint. |
| 11 | All as per Srl item No 10 here-in-before but treatment over the plastered surface of wall including cleaning. |
| 12 | M&L for disconnecting of PVC tank of capacity n.exc 500 for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatment of roof slab beneath the tank in following laid down process all as specified and directed :-a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour.b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins.c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tankd) Refixing the tank with fittings as required in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as specified and directed. |
| 13 | M&L for disconnecting of PVC tank of capacity exc 500 Ltrs but n.exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatment of roof slab beneath the tank in following laid down process all as specified and directed :-a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour.b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins.c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tankd) Refixing the tank with fittings as required in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as specified and directed. |
| 14 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store. |
| 15 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge |
| 16 | S&F 200 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed. |
| 17 | S&F 110 mm dia PVC (SWR) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed. |
| 18 | S&F 200 mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 19 | S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 20 | Demolition of brick work as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces. |
| 21 | M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6 complete all as specified and directed. |
| 22 | M&L for 15mm thick plaster in Cement Mortar 1:4 on other than fair face of brick walls or concrete surface, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm at any height including necessary scaffolding etc complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for preparation of old plastered/concrete surfaces of walls and applying one coat of oil bound distemper, white or tinted at any height including necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge. |
| 25 | M&L for preparation of old plastered /concrete surfaces of ceiling and applying one coat of oil bound distemper, white or tinted at any height including necessary scaffolding etc complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for Cleaning cracks or grooves in RCC Slab/Brick tiles/PCC tiles surface of width upto 25mm and in any existing depth with compressed air to make it free from all loose and foreign particles filling with poly plastic fiber adhesive and white cement with 1:1 ratio as prime coat to level the bottom surface complete all as specified as directedn by Engr-in- charge. |
| 27 | M&L for preparation of old plastered/concrete wall surface and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm complete all as specified and directed |
| 28 | Note :- Amount of credit of Rs. 75650.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender