Tender For Improvement Of Remaining Work Of Smashanbhumi At Bhugaon Taluka -Mulshi, District- Pune
Tender Value
4.22 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
0 days left
EMD
4221
Bank guarantee accepted
Document Fee
118
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Remaining Work Of Smashanbhumi At Bhugaon Taluka -Mulshi, District- Pune
BOQ
| Sl. No. | Item Description |
| 1 | 1.NAME OF SUB WORK -- EstimateITEM NO.:1 Providing and laying Cast in situ/ReadyMix cement concrete in M-10 of trap/ granite/l quartzite/gneiss metal for foundation and bedding includingbailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if specialfinish is to be provided, finishing if required and curingcomplete, with fully automatic micro processor basedPLC WITHOUT SCADA enabled reversible Drum Typemixer/concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate ((Crushed sand VSIGrade finely washed ). |
| 2 | ITEM NO.:2 Providing and fixing heavy duty interlocking concrete Coloured paving blocks of 60 mmthickness of having a strength of 300 kg/Sq.cm. ofapproved quality and shape on a bed of crushed sandof 25 to 30 mm thick including skirting joints andcleaning etc. complete..( |
| 3 | ITEM NO.:3 Providing and fixing colour coatedZincalume (R ) AZ150 ( min 150 gms/sq.mt. Total oneach side) profiled sheets for roofing. The feedmaterial is manufactured out of nominal 0.45 mm BaseMetal Thickness ( BMT ) (0.5 mm TCT ), Hi-strengthsteel with min.550 Mpa yield strength, metallic hot dipcoated with Aluminium-Zinc alloy (55% aluminium43.4% zinc 1.6% silicon) with COLORBOND (R) steelquality super durable polyester paint coat ( withinorganic pigment). The paint shall have a total coatingthickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 umreverse coat on back surface. Profile sheet shall havenom. 950-1050 mm effective cover width and nominal25-30 mm deep ribs with subtle square fluting in the fivepan at nominal 180-250 mm center-to-center. The endrib shall be designed for anti-capillary groove. & returnleg. The feed material should have coil manufacturersproduct details marked a regular interval. Includingfasteners with min. Fastened with min. 25 um Zinc-Tinalloy coated, Hex head, self-drilling screw etc.including all fixtures etc.and fixing the boards in 1:4:8concrete block of size 60 cm x 60 cm x 75 cm including.excavation, refilling, transportation, and labour etccomplete. Spec. No. As directed by Engineer inCharge. |
| 4 | ITEM NO. : 4 Providing and fabricating structural steelWork in rolled sections like joists, channels, angles, teesetc. as per detailed design and drawings or as directedincluding cutting, fabricating, hoisting, erecting, fixing inposition making riveted / bolted /welded connectionswithout connecting plates, braces etc. and including onecoat of anticorrosive paint and over it two coats of oilpainting of approved quality and shade etc.complete.. |
| 5 | ITEM NO. :5 Providing and laying Cast in situ/ReadyMix cement concrete in M15 of trap/granite/quartzite/gneiss metal for bed blocks,foundation blocks and such other items including bailingout water, Steel centering, formwork, laying/ pumping.compacting, roughening them if special finish is to beprovided, finishing uneven and honeycombed surfaceand curing etc. complete. The Cement Mortar 1:3plaster is considered for rendering uneven andhoneycombed surface only. Newly laid concrete shallbe covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.), with fullyautomatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixerl concreteBatch mix plant (Pan mixer) etc. complete. With fineaggregate (Crushed sand VSI Grade finely washed).. |
| 6 | ITEM NO. :6 Providing and fixing board displayinginformation, such as 'Name of work, Tender cost, Nameof Contractor, Work completion and liability period etc',having rectangular shape of 1.20m x 0.90m size madeout 18 gauge (1.25mm) thick mild steel sheet paintedwith one coat of Zinc chromate stoving primer and twocoats of enamel paint on front side and grey stoveenamel on back side and border l messages / symbolsetc. with approved colour shade paint complete, onM.S.angle of size 35 x 35 x 3 mm frame with properlycross braced M.S. angles of size 35mmx35mmx3mmduly painted including Two M.S. angle iron posts of size65 mm x 65 mm x 6 mm, 3.65 m long painted withalternate black and white bands of 25 cm width |
| 7 | ITEM NO. :7 Providing cast in situ / ready mix M10grade cement concrete for head walls of CD work/retaining walls etc. including necessary form work,compaction, finishing and curing etc. complete. (withreversible drum type mixerl concrete batch mix plant(pan mixer) WITHOUT SCADA with fine agreegates ofrequired specifications |
| 8 | ITEM NO.:8 Providing and fixing screw down 15 mmdia. wheeled stop tap of brass including necessarysockets/union nut complete. |
| 9 | ITEM NO. :9 Providing and laying concrete pipes ofL.S.NP. class of 225mm diameter in proper line, leveland slope including necessary collars, excavation,laying, fixing with collars in cement mortar 1:1 andrefilling the trench complete.. |
| 10 | 3. NAME OF SUB WORK -- Testing Charges EstimateITEM NO.:1 CONCRETE PAVING BLOCKSCompressive Strength, Water Absorption, (Set of 8Blocks) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender