Tender For Repairing Of Borewell Motors Laying And Joining Gi Pipes In Kaithemillath Colony In Ward No 95 South Zone. Roc.No. 4918 / 2026 / D1(S)
Tender Overview
Project Description
Tender for Repairing Of Borewell Motors Laying And Joining Gi Pipes In Kaithemillath Colony In Ward No 95 South Zone. Roc.No. 4918 / 2026 / D1(S)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Aug-2026 | e3extension1 | Date | 01-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Removal of submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under Erection of submerssible Charges etc., completed |
| 2 | Rate for flushing of borewell of 6\\" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by 'V' notch method if required. |
| 3 | Rewinding and repairing of 5 HP to 10 HP three-phase submersible borewell motor using super enamelled copper wire including insulation, varnishing, replacement of defective bearings, seals and accessories, testing and commissioning complete in all respects as directed by the Engineer-in-Charge |
| 4 | Supply and delivery of clear water vertical wet type submersible pump set suitable for 150 mm dia borewell conforming to IS8034/2002 as amended there after and BEE 3 Star Rated capable of discharging noted LPM agains the ad of water column due to all causes. The pump shall be with stain less steel shaft and dynamically balanced bronze or Cast S S impeller, brass screws and CIFG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283/1995 as amended there after,suitable for operationin AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %(WD-M1620) |
| 5 | NP Ittery bore (7.5hp)(WD-M1633)(75x200) |
| 6 | Supply and delivery of the following materials approved brand as per ISI quality anapproved by corporation officers. |
| 7 | 50mm dia GI Pipe 'B' Class |
| 8 | 50mm dia GI Bore coupling |
| 9 | 50mm dia GI bend |
| 10 | 50mm dia GI elbow |
| 11 | 50mm NRV Valve |
| 12 | 50x300mm GI barrel nipple |
| 13 | 50 x 450mm barrel nipple |
| 14 | 50x600mm GI barrel nipple |
| 15 | 50x900mm GI barrel nipple |
| 16 | 50 mm dia GM gate valve |
| 17 | 50mm dia MS Bore clamp |
| 18 | MS borewell cover |
| 19 | supply of 4mm 2x3 core copper, PVC insulated flat cable. |
| 20 | Supply and delivery of Star-Delta starter confirming to IS1 3947 and IEC60947-1 suitable KW rating for operation in AC/ Three Phase / 50 HZ (+/-5%)and415V(+/-0%) including 3 pole magnetic contactor with under voltage release 3 nos., CT operated Ammeter (65mmdia) with suppressed scale, Voltmeter (65mmdia), Volt meter selector switch, Miniature circuit breaker, Thermal Over load relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1sq.mm /4sq.mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). |
| 21 | Supply and delivery of Star-Delta starter confirming to IS1 3947 and IEC60947-1 suitable KW rating for operation in AC/ Three Phase / 50 HZ (+/-5%)and415V(+/-0%) including 3 pole magnetic contactor with under voltage release 3 nos., CT operated Ammeter (65mmdia) with suppressed scale, Voltmeter (65mmdia), Volt meter selector switch, Miniature circuit breaker, Thermal Over load relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1sq.mm /4sq.mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). |
| 22 | labour for the erection of submerssible pumbset in borewell including fixing and jointing submerssible cable with proper claps upto the starter to the required depth and also fixing of riser pipes to the required depth values erection clamps, pressure gauges upto exterior wall of the pumb room and erection of panel board consisting of TPICN, switches starter, voltmeter ammeter 3 pilot (inculding lamps) capacitor single phasing preventer, water level guard and laying and jointing the cables and twin earthining as per IE rules inculding constructions of earth pits waith earthing material s as per rules etc. completed testing pumbset on trail run 30 days and as directed by corporation officers. |
| 23 | Add :- GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 20 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender