Tender For Additional Work Of Community Toilet @ Near Kamarajar Statue In Vadakku Valliyur Town Panchayat. Estimate Amount Rs.8,25,000/-
Tender Value
8.25 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
3 days left
EMD
8250
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Work Of Community Toilet @ Near Kamarajar Statue In Vadakku Valliyur Town Panchayat. Estimate Amount Rs.8,25,000/-
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to allcauses. The pump shall be with stainless steel shaft and dynamically balanced bronze mixedtype impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod asper IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3core suitable copper flat submersible cable to a length of 15m with necessary cable joints. Thenon-return valve located at the top of the pump in the discharge outlet connection is to be designedwith minimum friction. The pump should be directly coupled to 2880 RPM, three phase,50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP,Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HPstarting and for continuous operation. |
| 2 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amendedthereafter with suitable KW rating for operation in AC/Three Phase/50HZ (± 5%) and 415V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole MagneticContactor with under Voltage protection, Indication lamp, starting capacitor, running capacitorand On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVCinsulated cable, powder coated vermin proof box including the capacitor (the cost of capacitoris to be taken separately). |
| 3 | Supply and fixing of 4.00 sqmm PVC Insulated and Sheathed 3 core flat type copper cable conforming to IS 694/1900 and Amended thereafter including all cost of material and labour cost etc., |
| 4 | supply and fixing of PVC pipe (electrical )pipe M-1648 PVC Rigid Pipe 25mm (1”) including all cost of material and labour cost etc., |
| 5 | Supply and delivery of PVC pipe and specials including all cost of material and labour cost etc., a. 32mm PVC Pipe |
| 6 | b. 32 mm PVC Elbow |
| 7 | c. 32 mm PVC Tee |
| 8 | d. 32 mm GM Ball Valve |
| 9 | e. 32 mm SS Shower Arm |
| 10 | f. 32 mm SS Angle Valve |
| 11 | g. Health Hose |
| 12 | h. 25 mm GI Tank Nipple |
| 13 | i. 25 mm GI Union |
| 14 | j. 32 mm PVC FTA |
| 15 | k. 25 mm SS Nalli |
| 16 | l. Urinal Valve |
| 17 | m. 50 mm PVC Pipe |
| 18 | n. 50 mm PVC Tee |
| 19 | o. 50 mm PVC Elbow |
| 20 | Supply and fixing of stainless steel door including all cost of material and labour cost etc,. |
| 21 | Supply and fixing of WPVC Door including all cost of material and labour cost etc, |
| 22 | Wiring with 2x1.5 sq.mm. PVC insulated unsheathed FRLSSC copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5AFT switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (for electronic regulator) SD 22 |
| 23 | Wiring with 2x1.5sq.mm.PVCinsulated SCunsheathed FRLS copper conductor of1100Vgrade insuitable PVC rigid pipe concealed inwall and ceiling with PVC accessories inflush with wall with 150 mmx100mm x113mm TW switch box with 3mm thickhy lem sheet coverfor 5A3pinnon interlocking wallsocket with5A flush typeswitch with continuous earthwire connection of 1.5sq.mm copperwire and making good ofthe concealed portion with suitable colour forconcealed PVC plug point Sd 38 |
| 24 | Supplyand fixing of 4Feet LED 18 W Fitting with LED 18W tube(HigherEnd)completewithconduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube SD 445 |
| 25 | Supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 no.19mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .(SD 455) |
| 26 | Supply and run of 2of1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 65 |
| 27 | Supply and fixing of ELCB including all cost of material and labour cost etc.. |
| 28 | Supply and fixing of Twplank ofsize 600mmx450mmx19mm with supporting reepers of 1\\"thick on bothside with painting and with bolt, nut and washer |
| 29 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 30 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 31 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification |
| 32 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixingand jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 33 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 34 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 35 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 36 | Supply and fixing of 50 mm GI pipe for vertical support including cost and conveyance of all materials to site, loading and unloading charges and labour charges for complete. Complying with std. specifications. |
| 37 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 38 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender