Tender For Renovattion Of Dak Banglow Mahuadanr Block Mahuadanr District Latehar
Tender Value
44.87 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
90000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Latehar → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovattion Of Dak Banglow Mahuadanr Block Mahuadanr District Latehar
BOQ
| Sl. No. | Item Description |
| 1 | Modular Extendeble conference table without GST |
| 2 | GST ADD@18% |
| 3 | Labour Cess add@1% |
| 4 | Labour for site clearance and cleaning old wall surface roof etc complete job |
| 5 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.7) |
| 6 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, taxes and royalty all complete as per building specification and direction of E/I. |
| 7 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 8 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement. 600x600 mmB.C.D. S.O.R. Item No. 5.6.28 |
| 9 | Providing and laying 6 mm precast white glazed tiles in walls over 12 mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing taxes and royalty all complete as per building specification and direction.B.C.D. S.O.R. Item No. 5.6.23.1 |
| 10 | Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.B.C.D. S.O.R. Item No. 5.10.10 |
| 11 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.D.S.R. Item No. 13.80 |
| 12 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding, washing of floors and taxes all complete as per specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.18 |
| 13 | Providing and Applying high quality acrylic modified resin based texture of Dholpur / red sandstone pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs /10 sqm to form film of 1-1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface followed by top coating with premium acrylic smooth exterior paint with silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm complete as the direction of Engineer-in-charge. DSR 22.24A |
| 14 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) mover and including priming coat of exterior primer applied@ 2.20kg/10 sqm DSR 13.45.1 |
| 15 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thickbottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips madeout of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of theboard with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :DSR 12.45 |
| 16 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.43 |
| 17 | Providing and fixing factory made UPVC glazed/wired mesh window/door frame of Three track three panels sliding window with two glazed & one wire mesh panels withAluminium channel for roller track, wool pile, nylon rollers with SS 304 bodyUsing R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screensash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle onevery glazed panel along with multi-point locking system. (Height upto 1.8m).DSR 9.147A1.2 |
| 18 | Providing and fixing mirror supirior glass (of approved quality ) and of required shape and size with plastic moulded frame of approve make and shade with 60mm thick hard board backing .Rectangular shape 1500x450.D.S.R. Item No. 17.32.4 |
| 19 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 5.4.38 |
| 20 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.32 |
| 21 | Providing and laying APP (Atactic Polypropylene Polymer)modified prefabricated five layer 3mm thick water proofing membrene,black finished reinforced with non woven polyster matt consisting of a coat of bitumen primer for bitumen membrene @0.40 lit/sqm by the same membrene manufacture of density at 25 degree celcious........do...... of E/I DSR 14.91.1 |
| 22 | Window curtain of size 5'x5' with their support accessories. NS |
| 23 | Water proofing for old and new roof slab :- providing and laying water proofing treatment on roof slab by applying two component , factory designed ready to use acrylic modified fiexible material appiied with brush , roller or spray for water proofing coating as permanufacturer specification with following steps all complete as per direction of E/I.(5.12.1) |
| 24 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes.D.S.R. Item No. 12.41.2 |
| 25 | Carriage of materials including loading, unloading, stacking -do- -do- all complete as per specification and direction of E/I.cement |
| 26 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 27 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire |
| 28 | 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire |
| 29 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 30 | Supplying and fixing brass batten/angle holder including connection etc. as required. |
| 31 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 amps Double Pole |
| 32 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 33 | Supplying and laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc. as required. |
| 34 | S/F S.P.MCB DB :- Supplying & fixing following way single pole neutral sheet MCB distriution board 240 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted with complete job |
| 35 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75mm x 75mm x 50mm |
| 36 | 121mm x 173mm x 48mm |
| 37 | 170mm x 221mm x 48mm |
| 38 | 210mm x 206mm x 48mm |
| 39 | Supplying and fixing of ceiling fan - 48\\" dia with regulator. |
| 40 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. |
| 41 | Supplying and fixing of holder type LED - 9/10 watt |
| 42 | Supplying and fixing of 1x40 W tube light fitting single box type with tube |
| 43 | Supply of 12\\" (300mm) metal exhaust fan |
| 44 | Copper tube of size 3/8 inch for split ac unit1/1.5/2/3 tn capacity incluiding nitride rubber insulation |
| 45 | 5KVA wall mounted automatic voltage stablizer from range 140v to 280v |
| 46 | Drain pipe for AC |
| 47 | 1.5Tr. 5Star Split A.C (Inverter Type) IS-1391part-i |
| 48 | Supplying fitting & Fixing Recess Mounting LED Square Down light 2X2 36 Watt |
| 49 | Supplying fitting & Fixing Recess Mounting LED Round Down light 6/7 watt |
| 50 | 90/100 W LED Flood Light |
| 51 | T.V SOCKET OUTLET MODULAR TYPE |
| 52 | s/f modular type switch /socket :-supply and fuxing following modular type switch / soket on the exisiting modular plate and switch box including connection but excluding modular plate etc.. 5/6 amp |
| 53 | 6 PIN 15/16 Amps modular socket outlet |
| 54 | s/f busbar chamber 400 amp |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes concealed work15 mm nominal |
| 56 | 20 mm nominal |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal outer dia Pipes |
| 58 | Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job.a) 125mm thick |
| 59 | b) 250mm thick |
| 60 | Providing and fixing gate valve of approved quality with complete job, 25 mm dia |
| 61 | Supplying Polythene water storage tank of ISI mark (e.g. sintex / Sinter / Himgiri / Gangotri etc.) with cover and locking system. |
| 62 | Providing and fixing male ended 15mm dia brass bib cock with complete job |
| 63 | Providing and fixing 15 mm size C.P. brass pillar cock C.I. body brass spindle pillar cock with complete job(C.I. Body brass spindle) |
| 64 | Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other with complete job |
| 65 | Providing and fixing white vitreous china pedustal for wash basin completely recessed at the back for the reception of pipes and fitting |
| 66 | Providing, fitting and fixing 40mm high vitreous white glazed earthen EWC with p trap of Parry Hindustan or any other approved with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 12.5 ltr low level PVC cistern |
| 67 | b).Soap Dish |
| 68 | c).Towel rail |
| 69 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.a).Door tee- 110mm |
| 70 | b) Dlain bend - 110mm |
| 71 | c)Single tee without door - 110mm |
| 72 | Labour for site clearance and cleaning old wall surface roof etc complete job |
| 73 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.7) |
| 74 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 75 | Providing and Applying high quality acrylic modified resin based texture of Dholpur / red sandstone pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs /10 sqm to form film of 1-1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface followed by top coating with premium acrylic smooth exterior paint with silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm complete as the direction of Engineer-in-charge. DSR 22.24A |
| 76 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.43 |
| 77 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding, washing of floors and taxes all complete as per specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.18 |
| 78 | supplying labours , tools and tackles for cleaning filled and choaked man hole , septic tank , inspection chamber , gully pits , sewerage tank etc in all lifts and disposal of spoils upto lead of 50 m all complete as per specification and direction of E/I D.W.S.D. S.O.R. Item No. 3.3.9 |
| 79 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.DSR 19.32.1 |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal outer dia Pipes DSR 18.9.3 |
| 81 | Cement |
| 82 | Goods & Service Tax (G.S.T.) - 18% |
| 83 | Labour Cess - 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender