Tender For Providing Flushing Of Borewells, Diversion Of Water And Formation Of Leading Channelsand Replacement Of Pumpsets And Allied Works For 5 Nos Of Cwss In Thoothukudi District (Package - I)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2026
3 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Flushing Of Borewells, Diversion Of Water And Formation Of Leading Channelsand Replacement Of Pumpsets And Allied Works For 5 Nos Of Cwss In Thoothukudi District (Package - I)
BOQ
| Sl. No. | Item Description |
| 1 | Providing flushing of Borewell in river Vaippar Headworks at Vilathikulam, under Ariyanayagapuram CWSS in Vilathikulam & Pudur Union |
| 2 | Rate for flushing of borewell of 6\\" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by 'V' notch method if required. Bore well No-1 |
| 3 | Labour charges for the removal of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete - Upto 5 HP |
| 4 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. - Upto 5 HP |
| 5 | Supply and delivey of pipes and specials including laying and jointing etc complete. |
| 6 | 50 mm GI Pipe |
| 7 | 50 mm GI Coupling |
| 8 | 50 mm GI Bend |
| 9 | 50 mm GI Flange set |
| 10 | 50 mm GI Tee |
| 11 | 50 mm GM Gate valve |
| 12 | 50 mm Non Return valve |
| 13 | 50 mm MS Clamp set |
| 14 | 50 mm GI Hex Nipple |
| 15 | 50 mm GI Flange set rubber |
| 16 | Providing diversion of water and formation of leading Channel and replacement of pumpset under 180 CWSS |
| 17 | Sand , Silt or other loose soil, Wet Sand or Silt not under Water , light black Cotton Soil, Sandy Loam and ordinary Soil including excavated earth SS 20 B for providing Flow diversion Channel in river bed for diverting the River flow to Collector wells I,II & III locations |
| 18 | Infiltration Well No: I |
| 19 | Infiltration Well No: II |
| 20 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation - 985 lpm x 22 m - 10 hp at HW |
| 21 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. 985 lpm x 22 m - 10 hp at HW |
| 22 | Supply and delivery of Star-Delta starter confirming to IS13947, IEC60947 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 3 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/4 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
| 23 | For 10 HP Starter - 2Nos |
| 24 | Pumpset pipe connection -150mm GI |
| 25 | Providing diversion of water and formation of leading Channel under 161 CWSS |
| 26 | Diversion of Water and Formation of Leading Channel from water flowing area of the river to Infiltration wells Sand , Silt or other loose soil, Wet Sand or Silt not under Water , light black Cotton Soil, Sandy Loam and ordinary Soil including excavated earth SS 20 B for providing Flow diversion Channel in river bed for diverting the River flow to Collector wells I,II & III locations |
| 27 | Infiltration Well No: V |
| 28 | Infiltration Well No: X |
| 29 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation |
| 30 | 1361 lpm x 17 m - 15 hp at HW |
| 31 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 32 | 1361 lpm x 17 m - 15 hp at HW |
| 33 | Supply and delivery of Star-Delta starter confirming to IS13947, IEC60947 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 3 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/4 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
| 34 | For 15 HP Starter - 2 Nos |
| 35 | Pumpset pipe connection -150mm GI |
| 36 | Providing flushing of borewell in river Vaippar headworks at Vilathikulam, under Kottanatham CWSS in Vilathikulam union |
| 37 | Rate for flushing of borewell of 6\\" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by 'V' notch method if required. |
| 38 | Bore well No-1 |
| 39 | Labour charges for the removal of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete Upto 5 HP |
| 40 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. Upto 5HP |
| 41 | Supply and delivey of pipes and specials including laying and jointing etc complete. |
| 42 | 50 mm GI Pipe |
| 43 | 50 mm GI Coupling |
| 44 | 50 mm GI Bend |
| 45 | 50 mm GI Flange set |
| 46 | 50 mm GI Tee |
| 47 | 50 mm GM Gate valve |
| 48 | 50 mm Non Return valve |
| 49 | 50 mm MS Clamp set |
| 50 | 50 mm GI Hex Nipple |
| 51 | 50 mm GI Flange set rubber |
| 52 | Providing flushing of borewell in river Vaippar headworks at Muthalapuram under Sindalakarai CWSS in Kovilpatti & Vilathikulam union |
| 53 | Rate for flushing of borewell of 6\\" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by 'V' notch method if required. Bore well No-1 |
| 54 | Labour charges for the removal of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete - Upto 5 HP |
| 55 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. Upto 5 HP |
| 56 | Add GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender