Tender For Construction Of 2Nd Story Of Dfo Office Building Social Forestry Division Baramulla.
Tender Value
50.87 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
8 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 2Nd Story Of Dfo Office Building Social Forestry Division Baramulla.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including GS Sheets ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : |
| 2 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : |
| 4 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in Cement Mortor |
| 5 | Dismantling tile work in floors/Walls and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm. |
| 6 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of soil |
| 7 | Providing & laying dry stone solling, sand/dust including ramming, dressing etc complete in foundations and under floors, including Mech. Carriage & Head load charges up to site of work complete. |
| 8 | Providing & laying in position cement concrete (1cement: 4 coarse sand: 8 graded stone agg 40mm nominal size) mix of specificied grade excl cost of centering and shuttering. All work upto plinth level. |
| 9 | Centering and shuttering including strutting, propping etc and removal of form work for. |
| 10 | Centering and shuttering including strutting, propping etc and removal of form work for. Foundations, footings, bases of columns etc. |
| 11 | Centering and shuttering including strutting, propping etc and removal of form work for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 12 | Centering and shuttering including strutting, propping etc and removal of form work for suspended floors |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings balconies, shelves, chajjas, lintles, bands, plain window sills, staircases and spiral stair cases upto floor five level exculding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone agg 20mm nominal size). |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Thermo-Mechanically Treated bars of grade Fe-500D or more). |
| 15 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand |
| 17 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 18 | Brick work with F.S.P bricks of class designaion 75 in foundation & plinth in cement mortor (1 cement :6 coarse sand). |
| 19 | Half Brick masonry with FSG bricks of class designaion 75 in foundation & plinth with super structure upto floor V level in cement mortor 1 cement:4 coarse sand. |
| 20 | Dry random rubble masonry with hard stone from quarry in foundation and plinth. Sokage Pit |
| 21 | Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry. But excluding the cost of nosing of steps etc complete. (50 mm thick with 20 mm nominal size stone. Crushed. |
| 22 | 12 mm cement plaster of mix 1:4. (1 cement : 4 coarse sand ). |
| 23 | 6 mm cement plaster to ceilling of mix 1:3 (1 cement : 3 fine sand). |
| 24 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4. (1 cement : 4 fine sand ). |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). First class kail wood 3''x5'' |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (First Class KAIL WOOD 35 mm). |
| 27 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : (First Class Kail wood 35 mm). |
| 28 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 29 | Providing hoisting and fixing trusses/purlins /rafters /posts/ post-plates or like components including cost of screws etc. complete, Including all carriages up to site of work.( First class Budloo wood) |
| 30 | Hoisting and fixing trusses/purlins /rafters /posts/ post-plates or like components including cost of screws etc. Timber (Budlo Wood) for Truss, Availibe at Site. Only Labour Rate. |
| 31 | Providing & fixing of flat iron of 6 mm thick 50 mm width including holes etc for truss work complete. |
| 32 | Providing & fixing of Anchor Bolts for Truss work complete. |
| 33 | Providing & fixing of precoated iron Tile Profile C G I sheets, colored coated sheet roofing including cutting with all wastages, to size and shape wherever required, with cost of J or L hooks, bolts, nuts, washers with all carriages etc complete. |
| 34 | providing and fixing of ridges/ hips and valleys coloured including cost J or L Hooks, Bolts and nuts , Washers and all Carriages etc Complete |
| 35 | providing and fixing of plained 300x40mm wooden Eaves boarding for truss work(2nd Class Kail Wood) |
| 36 | providing and fixing of 20 mm thick wooden planks with T&G ceiling soffitts including all carriages upto site of work (Ist class Kail Wood) |
| 37 | Providing & Fixing of wood work in frames 2''x2'' to be fixed with wall vertical/horizantal for frame work of, T & G Ceiling Soffits, Panelling & Gables etc. (First Class Budlool Wood). |
| 38 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 200x10 mm. |
| 39 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm |
| 40 | Providing and fixing 85x42mm chro,ium plated brass pull bolt lock with necessary C.P. brass screws, nuts, bolts and washers etc. complete |
| 41 | Providing and fixing of bright finished casement stays (straight peg type) with necessary screws etc. complete 250mm weight not less than 280 grams. |
| 42 | Providing & fixing of 4 mm thick glass panes including cost and fixing wooden glass beading of required size etc. complete. Ground Floor |
| 43 | Pre-laminated particle board with decorative lamination on both sides .Ground Floor |
| 44 | Providing & fixing gang saw cut,mirror polished, premoulded and prepolished machine cut for kitchen platforms,vanity counters window sills,staircase risers over 20mmthick cement mortar 1:4mix Granite any color or shade 18 mm thick. |
| 45 | Providing & fixing of PVC for Ceiling & walls (6mm-8mm)of standrad quality and required colour with required Jams, with wastages including all carriages from approved source up to site of work complete job. |
| 46 | Providing & fixing of Required PVC Corrince for Ceiling & Walls Including all carriages of material from approved source up to site of work complete job. |
| 47 | Providing and laying vitrified floor tiles 600x600 mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 48 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 49 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc, in all colours & shades complete. |
| 50 | Sanitary work of Standrad & approved quality, Including all carriages of material from approved source up to site of work including all required accessories/parts with all fittings complete.(S.No. 51-67). |
| 51 | Providing & fixing of English WC pan with seat cover. |
| 52 | Providing & fixing of Low level cistern PVC 10 litrs |
| 53 | Providing & fixing Flat back Washbasin with pedestral. |
| 54 | Providing & fixing of centre hole basin mixer for wash basins. |
| 55 | Providing & fixing of CP Angle value. |
| 56 | Providing & fixing of CP health faucet. |
| 57 | Providing & fixing of looking mirror. |
| 58 | Providing & fixing of towel rod. |
| 59 | Providing & fixing of soap cases. |
| 60 | Providing & fixing of Glass Shelves |
| 61 | Providing & fixing of wall mixer non telephonic for bath Rooms. |
| 62 | Providing & fixing of 50 litre capacity Gyser including all fittings & fixtures. |
| 63 | Providing & fixing of Bib Cocks for bath Rooms. |
| 64 | Providing & fixing of Kitchen sink. |
| 65 | Providing & fixing of mixer for Sink. |
| 66 | Providing & fixing PVC pipes 100mm. B Class |
| 67 | Providing & fixing PVC pipes 75mm. B Class |
| 68 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, ouplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. (20mm OD) pipe |
| 69 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes complete. |
| 70 | Constructing of 9'' thick brick masonry manhole in cement mortar 1:4 mix ( 1 cement: 4 coarse sand ) foundation cement concrete 1: 4: 8 mix, 12 mm thick inside cement plaster with finishing, make channels with floating coat of neat cement and making channels in cement concrete 1:2:4 etc all complete job of internal size (450x450x300 mm) including manhole cover of approved brand. |
| 71 | Providing & fixing of concelead Electrification of Standrad and Approved quality, passing through plastic channels / conduits in 3/20, 7/16 & 7/20 wire incld. cost of channels, conduits, all required accessories/parts, nails, wiring, labour charges with all carriages complete. (S.No. 72-86) |
| 72 | Lighting points (1.5mm sq. wire). |
| 73 | Lighting Circuits with (2.5mm sq. wire). |
| 74 | Heating Points with SS combine (4mm wire ,15 Amp). |
| 75 | Generator /Inverter fittings Lighting points (1.5mm sq. wire). |
| 76 | Three pin Socket. |
| 77 | Half Indicator Points |
| 78 | Iron D Box of standrad make,18 way. |
| 79 | MCB DP 32- Amp |
| 80 | MCB DP 40- Amp |
| 81 | MCB DP 63- Amp |
| 82 | MCB DP 100- Amp Including all Complete Job |
| 83 | Exhuasters |
| 84 | Fan Points with 48 inch Sweep ceiling Fans of approved quality. |
| 85 | Concelead LED Bulbs. |
| 86 | Changeover Box 63 AMP. |
| 87 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 88 | Applying priming coat with ready mixed pink or grey primer of approved brand and manafacture on wood work. (Hard & soft wood). |
| 89 | Painting with synthetic enamel paint of approved brand and manafacture to give an even shade. (Two or more coats on new work). Wood work. |
| 90 | Providing & applying white cement based based putty of average thickness 2 mm thickness of approved brand and manafacture over plastered wall surface to prepare the surface even and smooth completly. |
| 91 | Distempering with oil bound washable distemper of approved brand and manafacture to give an even shade two or more coats on new work and including priming coat with cement primer. |
| 92 | Providing & fixing of Wooden Suryaas of Ist Class Walnut Wood including polish & carrige complete job. |
| 93 | Providing & fixing of Wooden Railing of Ist Class Walnut Wood including polish & carrige complete job. |
| 94 | Providing and fixing of Kitchen/Pantary Cabnet using teak wood, Dalmica including all required standrad accesseries/items complete. |
| 95 | Carriage of Bricks from approved source by Mechanical Transport up to site of work. av. 70 kmts |
| 96 | Carriage of Stones from approved source by Mechanical Transport up to site of work. av. 10 kmts |
| 97 | Carriage of Sand from approved source by Mechanical Transport up to site of work. av. 8 kmts |
| 98 | Carriage of Bagri from approved source by Mechanical Transport up to site of work. av. 42 kmts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender