Tender For The Work Of Shifting Of Pole And Line, Electrification And Giving New Connection To Various Consumers In The Area Of Ee, Eudd-33 Kv Ghaziabad-1 Under Running Tender (Deposit Scheme) Under The Jurisdiction Of Se Eudc-1 Gzb
Tender Value
50 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ghaziabad → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For The Work Of Shifting Of Pole And Line, Electrification And Giving New Connection To Various Consumers In The Area Of Ee, Eudd-33 Kv Ghaziabad-1 Under Running Tender (Deposit Scheme) Under The Jurisdiction Of Se Eudc-1 Gzb
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of PCC/ ST Pole 11 mtrs &13mtr Long from Electricity store center,Meerut Road, Ghaziabad/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road. within 50 KM. |
| 2 | Carriage of ACSR Dog Conductor from Electricity Store Center, Meerut Road, Ghaziabad to site of work with loading and unloading at both ends on Kachha Packka road.within 50 KM. |
| 3 | Carriage of line material (MS Channel, T-off Channel, 33 kv Disc Insulator, 33 kv Disc fitting, 33 kv Pin insulator with pin, 33 kv Pin with Nut, Earthing Complete, Cable Jointing Kit indoor/outdoor type etc. from Electricity Store Center, Meerut Road, Ghaziabad to site of work with loading and unloading at both ends on Kachha Packka road. (One Job =1 Connection material) within 50 KM. |
| 4 | Carriage of line material 33 kv XLPE from Electricity Store Center, Meerut Road, Ghaziabad to site of work with loading and unloading at both ends on Kachha Packka road. within 50 KM. |
| 5 | Carriage of 33 kv CT/PT Unit from Electricity store center, Meerut Road, Ghaziabad to site of work with loading and unloading at both ends on Kachha Packka road. within 50 KM. |
| 6 | Carriage of Metering Cubical Set Complete, from Electricity store center Meerut Road, Ghaziabad to site of work with loading and unloading at both ends on Kachha Packka road. within 50 KM. |
| 7 | Erection & Fixing of PCC/ STP Pole 11 mtr. long & 13 mtr long in 33 kv line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 8 | Erection and fixing of double pole on PCC/ ST Pole 11 mtr. long &13 mtr long with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 33 KV Pin insulator with Pin, Disc Insulator with Disc fitting as per RESPO Drawing/ Norms by providing top and dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 9 | Mounting, Placing and connecting from LT/HT side of 33 kv CT/PT Units as per RESPO Norms. |
| 10 | Providin of 140/160mm O/D PN-4PE-80 PN-4 grade UV stabilized HDPE pipe as per IS of 6 meter, for laying of underground Cable as per RESPO/Norms, including cost of above HDPE pipe. |
| 11 | Laying of 33KV XLPE Cable underground (800x2=1600 Double Circuit) through abvoe HDPE Pipe Trechless Machine , spare cable shall be left in the loop shape at both ends as per RESPO/Norms. |
| 12 | Laying of 33KV XLPE Cable underground (700x2=1400 Double Circuit) with Sand Brick, spare cable shall be left in the loop shape at both ends as per RESPO/Norms. |
| 13 | Road restoration charge for pucca road/footpath crossing as per RESPO/Drawing Norms. |
| 14 | Laying of 33 KV XLPE Cable in air and complition work properly as per RESPO/Norms DOUBLE 350X2=700 |
| 15 | Making and filling of 33 KV Cable Jointing Kit, I/D, O/D, S/T type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms. Jointing Kit Provide by department. |
| 16 | Installation of 33kv Metering Cubical & CT/PT Complete work as per RESPO Norms. |
| 17 | Fabrication & Fixing of T-Channel on pole by providing Holding Clamps, F-Clamps & Proper size nuts & bolts, as per RESPO/Norms. |
| 18 | Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops. |
| 19 | Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts. |
| 20 | Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast)Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials. |
| 21 | Wrapping of barbed wire on ST/PCC poles as anti-climbing device for a length of 0.9mtrs. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a hieght of 2.75 mtr from the ground complete, including providing & fixing of lower end & upper end clamps made of M.S. Flat 40X5mm complete with nuts & bolts and all other required material and T&P. |
| 22 | Fabrication of Guarding Angle X Arm & other requisites material for guarding by drawing 02 Nos G.I Wire and making loop at suitable distance as per RESPO drawing/Norms by providing holding clamps, 02 Nos. Eye bolts made of M.S. round size 12 mm dia-100 mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Norms. |
| 23 | Laying, Stringing and final sagging of ACSR Dog Conductor after binding from Insulator, as per RESPO/Drawing Norms. |
| 24 | Providing & Fixing of G.I. pipe 6\\"dia Class-B over 33 XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends. |
| 25 | Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms. |
| 26 | Providing & Fixing of Number Plate alongwith all required accessories (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms. |
| 27 | Dismantling & Removal of old existing 33 KV Meter Cubical/ CTPT |
| 28 | Dismantling & Removal of old existing STP/PCC pole after digging of pit and opening of all accessories. |
| 29 | Removal of old & used ACSR Dog Conductor and opening from insulator and bundling of the same. |
| 30 | Carriage of old & used STP/PCC from site of work to Electricity store center, Meerut with loading and unloading at both ends on Kachha Packka road. within 50 KM. |
| 31 | Carriage of old & used ACSR Dog Conductor from site of work to Electricity center, Meerut with loading and unloading at both ends on Kachha Packka road.within 50 KM. |
| 32 | Carriage of old & used Meter Cubical/ CTPT from site of work to Electricity store center with loading and unloading at both ends on Kachha Packka road within 50 KM. |
| 33 | Earthing of neutral & body of T/F By Boring and lowering of G.I. Pipesize 32 mm dia… into the ground up to water level 120 fit. With the lower end of solid copper cone approx. 225mm long and 750 gm. in weight shall be provided and screwed in pipe as well as bringing out a continuous copper wire 6 SWG from the cone up to the ground surface where it will be bolted to the M.S. earth strip for T/F neutral connection, the earth strip will be welded to the G.I. pipe and neutral earthing support. |
| 34 | Providing & Fixing Chemical earthing of Transformers Equipment the ground surface where it will be bolted to the M.S. earth strip for connection the earth strip will be welded to the earthing and neutral support, as per RESPO/Norms. |
| 35 | Jumpering work properly as per RESPO/Norms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender