Tender For Welcome Maintenance To Jco/Ors Md Accn At Bairagarh Under Ge Bhopal
Tender Value
40 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance To Jco/Ors Md Accn At Bairagarh Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M&L for 10mm thick rendereing brick or concrete surface in CM 1:6 finishing the surface fair & even without using extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description. complete all as specified and directed. |
| 3 | M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description.complete all as specified and as directed. |
| 4 | M&L for applying one coat of white wall putty 1mm thick on walls complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and as directed. |
| 6 | M&L for applying One coat of oil bound distemper emulsion on old prepared wall/ceilling surfaces including preparation of surfaces, of approved manufacturer, of required shade and colour complete all as specified and directed. |
| 7 | M&L for applying one coat of synthetic enamel paint over steel surface including prepartion of surface complete all as specified and directed. |
| 8 | M&L for applying one coat of synthetic enamel paint over wood surface including prepartion of surface complete all as specified and directed. |
| 9 | All as per item No. 5.00 here-in before but two coats of oil bound distemper emulsion on old prepared wall/ceilling surfaces including preparation of surface etc. complete all as specified and directed. |
| 10 | M&L for double charged vitrified ceramic tile light shade 8-10 mm thick (square /rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors/skirting over and including 15mm thick screed bed in CM 1:6 etc and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the permises compelete all as specified & directed. |
| 11 | M&L for double charged vitrified ceramic tile light shade 8-10mm thick (square /rectangular ) polished , area of each tile not exceeding 0.36 sqm on vertical surfaces such as skirting dado and risers to steps etc over & including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified & directed. |
| 12 | M&L granite 16-18 mm thick (of any type) work (machine cut) in steps, jambs, pillar, window-cills, cooking platform and like in 15 mm thick cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 including dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. |
| 13 | M&L for rounding to edges of stone one edge such as in steps,cooking platform and other similar situation complete all as specified and directed. |
| 14 | M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square /rectangular ) area of each tile exceeding 0.11 sqm , but not exceeing 0.18 sqm , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles incl Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises compelte all as specified & directed |
| 15 | M&L for glazed tiles , coloured 300x450 x 6 to 7 mm thick as in skirting/dado and over & including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises all as specifeid & directed . |
| 16 | M&L for water proofing treatment to sunken surfaces of slab (incl demolition of cement/lime concrete) in following sequence complete :- (a) Slope correction providing PCC 1:1.5:3 type B0 (using 12.5mm graded stone aggregate), average thickness 25mm , mixed graded styone aggregate , average thickness 25mm , mixed with integral water proffing compound \\"DITCHTMENT DM' manufactured by Dr fixit Pidiproof LW + of M/s Pidilite Industries or STP No 1 (Liquid) of M/S STP Ltd as approved by GE , in proportions as suggested by manufacturer. (b) Applying evenly a priming coat of bituminous primer confirming to IS 3384 @ 0.7 Kg per Sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen grade VG-10 @ 1.5kg/sqm on the primer surfaces. (d) Laying 150 micron thick black polythence film on the suface with 10mm overlaps sealed and bounded the surface. (e) Applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg per sqm on the surfaces.(g) S & F 32 mm dia UPVC pipe as in water spout at the lowest point of sunken floor with 600 mm projection beyond the outer face of the wall with outer end cut in chamfered angle for easy drain of water. (h) Ponding test shall be carried out for 72 hrs. |
| 17 | M&L for cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in sunken filling, mass concrete including demolition of cement concrete in floors and pavings not exc. 15 CM thickness (below/above ground level) complete all as specified and directed. |
| 18 | S&F 15mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors including taking up or down 15mm bore GI steel tubing and connections, including cleaning for refixing or removal to store and cutting chases, pinning in whereever reqd and make good in cm 1:3. complete all as specified and directed. |
| 19 | S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors including taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed and cutting chases, pinning in whereever reqd and make good in cm 1:3. |
| 20 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laborary with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantileer brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x complete all as specified all as specified and directed. |
| 21 | S&F in repair for designer bevelled edge frameless looking mirror of selected quality glass of min 6mm thick mirror glass fixed on wall with chromium plated screws in any size complete all as specified and directed. |
| 22 | S&F in repairs 15 mm pillar taps, fancy type , cast copper alloy, chromium plated, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 23 | S&F in repair 15 mm Bib taps, chromium plated , screwed down, screwed for iron pipe or for brass ferrule and fixing complete all as specified and directed. |
| 24 | S&F in repairs 15 mm bore Bib taps, long body fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete as specified. |
| 25 | S&F 15 mm stop/angle valves, cast copper alloy, chromium plated screwed down high pressure, with crutch or butterfly handle, scrwed both ends for iron pipe or for unions and fixing complete all as specified and directed. |
| 26 | S&F in repairs 15mm bore stop cock, cast copper alloy chromium plated with long shank and cup (concealed type) screwed down , screwd for iron pipe or union and fixed in repair complete as specified and as directed. |
| 27 | S&F in repair brass chromium plated shower rose 125mm in size with or without swivel joints any size including fixing to steel pipe or union , complete all as specified and directed. |
| 28 | S&F in repairs 20 mm (curtain rail) mild steel chromium plated facy type with fixing brackets, stops, rollers etc complete all as specified. |
| 29 | M&L in repair 18mm Plywood, grade BWR, type BB with 0.9mm decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions fixed with screws to timber frame work including 03 Nos self locking 90 degree hinges in each shutter, and 02 PVC knobs etc including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 30 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to UPVC door with beading complete all as specified and directed. |
| 31 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels including hacking out old broken glasses complete all as specified and directed |
| 32 | Taking down chowkhats or frame with shutter n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 33 | S&F solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instructions complete all as specified and directed. |
| 34 | M&L for fabricating and fixing powder coated (minimum 50 miciron ) aluminium sections of required size for doors, windows any type, frames and partitions including aluminium hinges of required size jointing cleats, screws salsh fasterners, plug for fixing with walls, column etc including taking down damage portion of damage door, windows complete all as specified and directed. Note :- Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges, rubber beadings etc complete. |
| 35 | M&L framed work such as grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 36 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR-2004 Part - II complete all as specified and as directed. |
| 37 | Taking down door shutter any description exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed. |
| 38 | Taking down chowkhats or frame with shutters exc 1.5 Sqm but not exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed |
| 39 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimension plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 41 | M&L for Providing Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) laminated wiremesh door shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from extrusion process WPC foam sheet single extruded (inner) with having minimum density not less than 650 kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( screw withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), minimum compissive of 50 N/mm2 , modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being termite/ borer free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed screws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer -In-Charge. Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company : |
| 42 | S&F 100 mm mild steel butt hinges, medium weight,cold rolled complete all as specified and directed. |
| 43 | S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 44 | S&F 150mm aluminium anodised barrel tower bolts extruded section and fixed with screws complete all as specified and directed. |
| 45 | S&F 200 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 46 | M&L for preparation new steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified . |
| 47 | S&F in repair 32/40mm bore PVC waste pipe for kitchen sink /WHB one mtr long complete all as specified and directed. |
| 48 | S&F in repair 100mm dia CP grating (Minium weight 25gms) chromium plated all as specified. |
| 49 | S&F in repair PVC connection 15mm size PTMT nuts of length 600mm all as specified and directed. |
| 50 | S&F in repair vitreous china squanting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) including cement concrete bedding complete all as specified and directred. |
| 51 | S&F china wash down water closet pan (pedestal pattern), white , pedestal pan and 'P' or 'S' trap , plastic water closet seat , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 52 | S&F in repair vitreous china wash basin, white , flat back, Size 630x450mm including brackets, waste pipe , coupling, PVC pipe connection 15mm dia 600mm long complete all as specified . |
| 53 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with all internal fittings including 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified. |
| 54 | S&F in repairs PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches , floors or fixed in walls complete all as specified and directed. |
| 55 | S&F PVC (SWR) 110mm bore bends any radius jointed with solvent cement, complete all as specified and directed. |
| 56 | S&F PVC (SWR) Junction (Single T) 110mm bore equal or unequal jointed with solvent cement all as specified and directed. |
| 57 | M&L 100 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement all as specified . |
| 58 | S&F PVC (SWR) pipe 75mm bore single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed. |
| 59 | S&F PVC (SWR) 75mm bore bends any radius jointed with solvent cement, complete all as specified and directed. |
| 60 | S&F floor door stopper 150mm long of aluminium ally body and tonge , anodised , with hard drawn steel spring, fixed in floor complete all as specified. |
| 61 | M/L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) in plinth protection, aprons, hard standing, path and like including bitmuminous mastic filling in 1:3 joints (in every 3.00mtr) and finishing the surfaces even and smooth without using extra cement including demolition of cement concrete in floors and pavings not exc. 15 Cm thickness (below/above ground level) complete all as specified and directed. |
| 62 | Deduct Schedule of credit (calculation will be done off line) Rs.46325.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender