Tender For Special Repair Of Junior Commissioned Officers Married Accommodation Bldgs No P-29 To P-32 (04 X Otrs), Provn Of Geyser In 170 X Jcos/Or Md Accn At Dogra Lines And Provn Of Parking Shed Near Building No T-40 In Unit Location Of 7Th Bn The 8Th G
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
97500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Junior Commissioned Officers Married Accommodation Bldgs No P-29 To P-32 (04 X Otrs), Provn Of Geyser In 170 X Jcos/Or Md Accn At Dogra Lines And Provn Of Parking Shed Near Building No T-40 In Unit Location Of 7Th Bn The 8Th Gorkha Rifles At Roorkee Military Station
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 3 | M&L for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 4 | Demolition of concrete/tiles/kota etc in ground floors and paving n. exc 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed. |
| 5 | Taking down cement or cement lime plaster from brick or stone walls etc incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L for new plasterd surface applying two coats of distemper oil emulsion white or tinted over and including a layer of 3mm thick wall care putty on wall complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick in CM (1:6) on brick walls finished over and fair without using extra cement complete all as specified and directed |
| 8 | M&L for new plastered surfaces applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed. |
| 9 | M&L for providing 15 mm thick rendering with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 10 | M&L for non skid joint free coloured ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 11 | M&L for non skid joint free coloured ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 12 | M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed |
| 13 | S&F granite (of any type) stone slab of 20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut, size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 14 | M&L75 mm thick cement concrete (1:3:6) type C-2 (40mm graded aggrete) as in plinth protection/path finish even and smooth without using extra cement complete all as specified and directed. |
| 15 | Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 16 | -Ditto- all as above but n.exc 1.5 Sqm each -ditto-. |
| 17 | Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each complete all as specified and directed |
| 18 | S&F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified supplied and fixed. |
| 19 | S&F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified supplied and fixed. |
| 20 | M&L for Cement Concrete (1:3:6) in filling of pressed steel frame, 20mm graded stone aggregate, complete all as specified and directed |
| 21 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 22 | S&F 35mm thick IInd class hard wood glazed skelton shutters open rebated and prepared to receive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section-8, clause 8.20 (a). complete all as specified and directed |
| 23 | S&F solid PVC door frame of the size 50mm width, 47 mm height with a wall thickness of 5mm (+0.25) made out of extruded 5mm made out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete all as specified and directed |
| 24 | S&F 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC \\"C\\" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE/Engr-in-Charge and all as per drawing/manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete all as specified and directed. |
| 25 | S&F Anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators, partitions with one or more rebates including jointing cleat for fixing complete all as specified and directed. |
| 26 | S&F anodised powder coated aluminium windows, ventillators shutters, slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips, rubber neoprene packing, anodised aluminium snap beading screws, locking latches etc complete all as specified and directed |
| 27 | M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed |
| 28 | S&F stainless steel (grade-304) grills made of hollow tubes section including welding, grinding, buffing polishing and making curvatures wherever required and fitting the same with necessary holdfasts/SS dash fastners with nut & bolts of required size, complete all as specified and directed. |
| 29 | S&F 5.5 mm thick plain, ordinary quality sheet glass and glazing with rubber packing in aluminium frame of door and window in any size in each pane complete all as specified and directed. |
| 30 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm |
| 31 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified |
| 32 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed |
| 33 | S&F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed |
| 34 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 35 | S&F butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed |
| 36 | S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed |
| 37 | S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed |
| 38 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed |
| 39 | S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed |
| 40 | S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed |
| 41 | S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, railings and similar conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 42 | M&L cement concrete Type B0 (1:2:4) (12.5mm graded) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 43 | S&F 110mm dia PVC (SWR) pipes sigle socketed in any length with rubber ring joints fixed to wall/floor incl taking down CI/AC/PVC pipe in any dia, complete all as specified and directed. |
| 44 | S&F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee, Elbow, Socket) complete all as specified and directed |
| 45 | S&F in repairs PVC (SWR) pipes single socketed (ISI Mark) in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed. |
| 46 | S&F in repairs PVC (SWR) bends / elbow 75 mm (ISI Mark) complete all as specified and directed. |
| 47 | M&L GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required complete all as specified and directed. |
| 48 | M&L GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified and directed. |
| 49 | Demolition of RCC of any description and in any position complete all as specified and directed. |
| 50 | M&L for cement concrete type B1 (1:2:4) in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar incuding formwork complete with joints to match set in CM 1:6 complete all as specified and directed. |
| 51 | M&L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 52 | S&F in repair 15 MM bore concealed stop valves long shank and cup cast copper allow chromium plated fancy type screwed down high pressure, with capstan handle long shank screwed both ends complete all as specified and directed. |
| 53 | M&L 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve hoisted and fixed in position all as specified in SSR Part-I and Dismantling of water tanks 500 ltrs of capacity and removing to store complete all as specified and directed. |
| 54 | S&F 15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 55 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed. |
| 56 | S&F in repair plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed. |
| 57 | S&F in repairs Jet Spray with (1.5 Mtr tube) complete all as specified and directed |
| 58 | S&F in repairs health faucet with (1.5 Mtr tube & hooks) complete all as specified and directed |
| 59 | S&F in repair 750 mm long PVC waste pipe suitable for 32 to 40 mm size waste coupling complete all as specified and directed |
| 60 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed. |
| 61 | S&F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. |
| 62 | S&F in repairs stop/ Angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. |
| 63 | S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed |
| 64 | S&F in repairs towel rail 600 mm long 20 mm dia Brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed. |
| 65 | S&F shelf of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats etc complete all as specified and directed. |
| 66 | S&F in repairs looking mirror 5 mm thick with and fixed with chromium plated brass screwes and cup washers complete all as specified and directed. |
| 67 | S&F in repairs CI floor trap 100mm dia with CP grating including jointing to waste pipe complete all as specified and directed. |
| 68 | S&F in repairs CP brass shower rose 125mm size shower with 300mm arm suitable for 15mm bore pipe complete all as specified and directed. |
| 69 | S&F 15mm bore PVC connection 450mm long complete and all as specified and directed |
| 70 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete and all as specified and directed. |
| 71 | M&L for complete removal of existing treatment by using machenical grinder & applying 1.50 mm thick white cement base eall care puttyand applying and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall surfaces complete all as specified and directed.Notes(a) The old surface shall be prepared by removing all foreign material by mechanical sander (rpm 1500-2700) alongwith internal dust extraction system for clean environment as approved by paint manufacturer.(b) Applying a coat of anti fungal growth solution as approved.(c) Wall care putty of required thickness shall be applied to make the surface true level by removing all dents etc as directed.(d) The work must got executed through authrosied applicator of reputed paint manufacturer by concluding MoU with manufacturer and guaranteed for a minimum period of 3 years by the manufacturer as approved by GE.(e) All the stages shall be got approved by GE before proceeding to next stage. |
| 72 | M&L applying a coat of 1.5 mm thick wall care putty as per manufacture instruction complete complete all as specified and as directed. |
| 73 | M&L complete removal of existing treatment (internal and external suraces) on walls by scrapping with steel wire brush or any other means including one coat of wall care putty on wall and applying two coat of oil bound distemper emulsion complete all as specified and directed. |
| 74 | Taking down old existing water prooging treatment from the top of RCC roof/arch slab, including taking down existing PCC padding/mud phuska in any thickness, or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed. Please Enable Macros to View BoQ information |
| 75 | Taking down old existing water prooging treatment from the top of RCC roof/arch slab, including taking down existing PCC padding/mud phuska in any thickness, or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender