Tender For Special Repair To Various Building In Bso Yard Of Ge (East) Under Ge (East) Delhi Cantt-10
Tender Value
1.44 Crore
Estimated cost
Bid Submission
05 Sep 2026
22 days left
EMD
2.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Various Building In Bso Yard Of Ge (East) Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Supply only of liquid water proofing compound complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for Virified Ceramic tiles light shade/double charged/ultra charged 8-10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed complete all as specified and as directed. |
| 4 | M&L for Glazed ceramic coloured tiles in vertical surfaces 600 x 300 / 450 x 350 x 7to 8 mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed. |
| 5 | M&L for Vitrified Ceramic tiles light shade/double charged/ultra charged 8-10 mm thick (square/ rectangular) polished, area of each tiles area exc 0.42 sqm but n exc 1.00 sqm sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed complete all as specified and as directed. |
| 6 | M&L for Vitrified Ceramic tiles light shade/double charged/ultra charged 8-10 mm thick (square/ rectangular) polished, area of each tiles area exc 0.42 sqm but n exc 1.00 sqm sqm, as in vertical surfaces/dados/skirting etc. set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:3) in dado/skirting tiles complete all as specified and directed. |
| 7 | M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size area of each tile exc 0.16 sqm not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and as directed. |
| 8 | M&L for machine cut kota stone slab flooring, 20-25 mm thick over cement screed bed 20mm thick with CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 9 | M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick backing coat in CM 1:3 all as specified and directd. |
| 10 | Demolition of Stone slabs and tiles of any description or thickness laid,bedded and pointed in any mortar in floors, aprons etc. |
| 11 | M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 20 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required complete all as specified and directed. |
| 12 | Granite (of any type) 18- 20mm thick machine cut, bedded/in skirting/in dado and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in CM 1:3 screed 10mm thick including grinding and polishing complete. |
| 13 | Demolition of reinforced Concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specified and directed. |
| 14 | M&L for reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) iSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likes complete all as specified and directed. |
| 15 | S&F Mild steel TMT bars of 6mm to 8 mm dia and over cut to length bent to shape required including cranking, bending etc and S&F for stengthening existing reinforcement by use of mild steel bars of any dia , cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 16 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 17 | M&L for 100 mm thick plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in flooring complete all as specified. |
| 18 | M&L for 75mm thick plain cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection complete all as specified. |
| 19 | M&L for 100 mm thick PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in sub base to floor complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L Chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick,with grey cement and pigment set, jointed and pointed in neat cement slurry in floors laid over and incl 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 21 | S&F WPC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam WPC sheet. The panel & strips shall be Density of 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two WPC strips. The WPC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm (±0.25 ) thick WPC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement including all fixing assecerories, moulding, corner beads complete all as specified and as directed by Engr-in-Charge. |
| 22 | Dismantling wall panelling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 23 | S & F of false ceiling with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles Size 595 x 595 mm of approved texture design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondaryintermediate cross-T of size 15 x 32 mmof length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 24 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.5 square metre each complete. |
| 25 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete. |
| 26 | S&F in repair 1.25mm thick of laths steel rolling shutters ,without ball bearing ,as specified including top cover ,including bending to the required shape ,anchoring rod ,hasp and staple and one shop coat of primer ,erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and directed by engr-in-charge |
| 27 | S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by engr-in-charge |
| 28 | S&F in repair Ball bearing for rolling shutters complete all as specified and directed by engr-in-charge |
| 29 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 30 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 31 | S&F 10-12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and finishing the surface even and smooth including frosted film sticked to glass including removing existing partition/doors also including grinding, polishing/bevelling of edges on 10-12mm thick toughned glass all as directed by Engr in charge complete all as specified and directed. |
| 32 | S&F Top patch (Model No-IPF-2 of complete all as specified and as directed. |
| 33 | S&F Bottom Patch (Model No-IPF-3 of complete all as specified and as directed. |
| 34 | S&F Top Pivot (Model No-IFC- GDP-105 of complete all as specified and as directed. |
| 35 | S&F Bottom and Top corner patch lock (Model No-IPL- 1 of complete all as specifed and as directed. |
| 36 | S&F Door handle H type 25x300mm (Model No-IGH- 55 of complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 37 | S&F Door handle H type 25x300mm (Model No-IGH- 55 of complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender