Tender For Comprehensive Maintenance Of Otm Accn At Dscc Under Ge Dronachal
Tender Value
40 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Otm Accn At Dscc Under Ge Dronachal
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brick or Stone Masonry built in cement mortar etc complete complete all as specified and directed. |
| 2 | M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 3 | M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 4 | Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above GL) incl tiling if any complete all as specified and directed |
| 5 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified & directed. |
| 6 | M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 7 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 8 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:4) complete all as specified and directed. |
| 9 | M&L glazed ceramic colour tiles, in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick thick set and jointed in neat cement slurry and pointed in white or colou cement to match fixed over 10mm thick CM (1:3) as in backing coat complete all as specified and directed. |
| 10 | M&L for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors over and including 20mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed |
| 11 | M&L for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished, area of each tile not exceeding 0.36 Sqm on vertical surfaces such as skirting, dado and risers to steps etc over & including 10 mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified & directed. |
| 12 | M&L Sand filling under floor/pavement or in foundation including watering and consolidation |
| 13 | M&L machine pressed precast concrete interlocking paver block in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment (reflective type) complete all as specified and as directed. |
| 14 | M&L Granite of 20mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and icluding 20 mm screed bed in CM 1:3 all as specified and directed. |
| 15 | M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, mass filling/ levelling coarse as it bedding coarse and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed |
| 16 | M&L for Taking down of cement plaster in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed |
| 17 | M&L for 20 mm thick rendering in CM 1: 4 on faces of brick or concrete surface, shall be done in two coats comprising 5mm thick in CM 1:4 mixed with water proofing compound @3% by weight of cement and over a backing coat of 15mm thick in CM 1:4 and finished with trowel to an even and smooth surfaces without using any extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid in respective item |
| 18 | Supply only Integral water proofing compound |
| 19 | M&L for 15 mm thick rendering brick or concrete surface in CM 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. |
| 20 | M&L for 10mm thick rendering on fair faces of brick or concrete surface in cm 1:3 finishing the surfaces fair & even without using extra cement as in ceiling complete all as specified and directed. |
| 21 | M & L Preparation of new plastered surface wall and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement based putty complete all as specified and directed. |
| 22 | Petty repairs to servicable sensor & fancy plumbing fittings by authorised agent including providing & replacing genuin company manufactured spare parts if required at site complete all as specified and as directed. |
| 23 | Fixing only in repairs existing sliding door bolt / tower bolt / handle / floor door stopper / helical door spring / hinges / hasp & staple, wooden pelmet boxes / drapery Rods of any size & material at any location complete all as specified and directed by Engineer-in-Charge. |
| 24 | Easing of door shutters, window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed. |
| 25 | Petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection,, float valves, concealed stop cock, GI pipe joints bottle traps, PVC water tank, low level flushing cistern , CPVC/GI pipe fittings incl providing & replacing of good quality rubber washer check nuts plunges ,taflon tape, M-seal, brass spindles (specific type), GI/ brass/CPVC fittings/ white cement/ silicon sealant etc or any other minor accessories / repairs to make the system all time functional , ensure smooth water supply without any wastage and stop water leakage including Mortar pressure to pipe line complete all as specified and directed. |
| 26 | Fixing with running welding in repair of Steel Windows, by Welding or by Bolts of adequate strength, Cutting of Windows whereever required for AC Duct Opening Etc, Inclding Weldin if Required on Window Ventilator Etc, Including all the necessary Accessories for Window Fixing, Window and Ventilator of any type, Any Size and thickness, complete all as specified and as directed. |
| 27 | Removing and Refixing in Same Opening by Repairing the Aluminium Doors and Windows, of any Type and any Size, Sliding or Openable, After Repairing, any Loose Fitting Sections, Including Screws, Bolts Rubber Clips, and other Similar articles, Making Good before refixing, Cleaning the Parts causing malfucntioning of Doors, Windows, by repairing the Jambs and Cills of Window/Doors if Required, All Including Material and Labour complete all as specified and as directed by Engineer-in-Charge |
| 28 | Removal and Refixing in same opening or any other opening, of any Shape and any Size 12 mm (or any other thickness) thick Toughned Glass as in Hinged Doors, Partitions, Automatic Doors and Similar work including cutting to Shape Drilling Holes required including necessary stainless steel fittings like Handles of size 300 mm Long and other connecting items necessary for proper functioning of door/ Opening complete all as specified and as directed by Engineer-in-Charge. |
| 29 | M&L for prepration of new ceiling surfaces, applying 3 coat of white wash on ceiling all as specified. |
| 30 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 31 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 32 | Taking down and re-fixing of old aluminum doors Shutter in same opening with necessary required repairs and fittings including galss rubber bedding door frame rubber bedding and glazing clips(Glass pan, floor hydraulic spring handles, mortice lock and tower bolt will be measured and paid separately) area exc 1.50 sqm but n.exc 4.00 sqm each |
| 33 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified. |
| 34 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solovent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in M.S. frame welded sealed to the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site as per specification and drawing. |
| 35 | S&F Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed. |
| 36 | Hacking out old glass (any thickness size quality or description) from wooden frame or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified and directed. |
| 37 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed |
| 38 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed |
| 39 | M&L12mm thick Prelaminated particle board, exterior grade,prelaminated both side with decorative choice lamination , fixed to aluminium door, partitions complete all as specified and as directed. |
| 40 | S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.180 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified. |
| 41 | S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg aluminium extruded section body complete all as specified and as directed. |
| 42 | S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 43 | S&F for 150 mm aluminium handles, cast type, anodised complete all as specified. |
| 44 | S&F for ISI Marked 200 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified. |
| 45 | S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 46 | S&F for 100mm Mild steel butt hinge complete all as specified and directed. |
| 47 | S&F 4-levers Aluminium Mortice lock, vertical type, size 100 mm complete all as specified and directed |
| 48 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 49 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified. |
| 50 | Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness & any position including cover fillets complete all as specified and directed |
| 51 | S & F Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specifiedcomplete all as specified and as directed. |
| 52 | M&L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paidseparately) complete all as specified and directed |
| 53 | Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as spfd. |
| 54 | Dismantling timber scantlings 40 sq. cm and over in section, for unframed work in any position complete all as specified and as directed. |
| 55 | Dismantling wrought iron or mild steel work of any description not otherwise described for of any description. |
| 56 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 57 | S&F steel work as in rafter, purlins, posts tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 Complete all as specified and as directed. |
| 58 | S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed |
| 59 | S&F in repair 6mm thick coloured polyicarbonate sheet (ISI marked) with shelf drilling steel screw with washer on roof and joint of two sheet will be filled with silicon weather proof sealent and cover with aluminum strip of size of 50x3 mm top and bottom and fixed with shelf drilling steel screw with washer on roof complete all as specified and directed. |
| 60 | S&F in repair for 3 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with bolts and washer in roof, wall etc complete all as specified. |
| 61 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 62 | Supplying and laying of GI tubing Dia 15mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. |
| 63 | Taking up or down 20mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 64 | Supplying and laying of GI tubing Dia 20mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. |
| 65 | S&F 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 66 | S & F in repair of ISI marked 15mm bore stop valves/angle valve concealed fancy type cast copper alloy, chromium plated with long shank and cup , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 67 | S&F 15 mm Pillar taps, cast copper alloy, chromium plated fancy type, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed by engr in charge.Make : Prayag or equivalent |
| 68 | Supply and fixing in repair for ISI marked 15mm bore, fancy type bib tap of chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 69 | S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 70 | S & F for in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge |
| 71 | S&F brass chromium plated tubular towel ring complete all as specified and as directed by the Engineer-in-Charge |
| 72 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge |
| 73 | S&F in repair for vitreous China wash basin, white, flat back, size 450x300mm including PVC connections 15mm size with PTMT nuts of length 450mm,waste coupling, 40mm pvc waste pipe of suitable length, brackets,and cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by the Engineer-in-Charge. |
| 74 | S&F in repair vitrous china white oval type under counter WHB of size not less than 195x600x425mm of first quality fixed all as specified and directed. |
| 75 | S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed by the Engineer-in-Charge. |
| 76 | S&F in repair vitreous china wash down water closed pan (pedestal Pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed. |
| 77 | Supply and Fixing in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed by the Engineer-in-Charge |
| 78 | S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader complete all as specified and directed. |
| 79 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall with PVC clamps complete all as specified. |
| 80 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorss complete all as specified. |
| 81 | S&F in repair brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed. |
| 82 | S&F in repair brass CP centre hole mixer for (WHB) mixing hot and cold water screwed down for iron pipe and fixed |
| 83 | S&F in repair waste coupling 40mm suitable size for kitchen sink of PTMT (half or full threaded) complete all as specified and directed |
| 84 | S&Fin repair 40mm bore PVC waste pipe for kitchen sink one mtr long complete all as specified and directed. |
| 85 | S&F in repair 32mm bore PVC waste pipe for wash basin one mtr long complete all as specified and directed. |
| 86 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm all as specified and directed. |
| 87 | S&F in repair Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 88 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spfd & directed |
| 89 | S&F in repair health faucets CP with 1.2 mtr long CP flexible pipe complete all as specified and as directed. |
| 90 | S&F in repair two way C.P. Bib cock 15mm dia complete all as specified and as directed. |
| 91 | Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in Charge for following capacity including writing with oil paint the date of cleaning on tank ; |
| 92 | (a) Exc 250 Ltrs but not exc 500 Ltrs |
| 93 | (b) Exc 500 Ltrs but not exc 1000 Ltrs |
| 94 | Dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed |
| 95 | Hoisting & Fixing 500 Ltr rotational moulded polyethylene water stotage tanks (cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. |
| 96 | S&F in repair for 20mm dia SS curtain rod decorative type incl brackets complete all as specified and directed. |
| 97 | Supply and Fix in Repair Rotational moulded polyethylene water storage tanks of 2000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe, tank cover etc including taking down existing tank complete . |
| 98 | Hoisting & Fixing 1000 Ltr rotational moulded polythylene water stotage tanks (cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. |
| 99 | M & L for preparation of old plastered surfaces of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required sharde & colour, as per manufacturer's specification over a coat of 1mm thick putty complete all as specified and directed by the Engr-in Charge. |
| 100 | M & L for preparation of old plastered surfaces of wall providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smoothcomplete all as specified and directed by the Engr-in Charge. |
| 101 | M&L for preparation of old plastered/unplastered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 102 | M & L Preparation of old plastered surface wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Make : Shalimar (Shaktiman)/ Asian (ACE) /Burger (Wall Menta) or equivalent in approved make by GE. |
| 103 | M & L for preparation of old plastered surfaces of wall and applying one coat of oil emulsion distemper white/coloured over all as specified and directed by Engr-in-Charge. |
| 104 | M&L preparation of old surface of wall and applying Two coat white wash complete all as specified and as directed |
| 105 | M&L preparation of old surface of ceiling and applying Two coat white wash complete all as specified and as directed |
| 106 | M&L preparation of old surface of Finishing walls with textured exterior/interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 107 | Supply and Fix in Repair or Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Anodised aluminium snap grid frame work for false ceiling all as specified and as directed by Engineer-in-Charge |
| 108 | S & F Solid PVC Wall Lining including dismantling if existing consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified |
| 109 | M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all speciified and directed |
| 110 | M&L for Preparation of old painted surfaces of Steel/ steel based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified. |
| 111 | M&L for preparations of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints all as specified and directed. |
| 112 | Waterproofing of terrace with Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnaum Product code 5662 OR Berger PU RoofKoat |
| 113 | (A) Surface Preparation(i) All surfaces should be dry and free from contamination such as oil, grease, loose particles, decayed matter, moss, algal growth, laitance and all traces of shutter release oils and curing compounds.(ii) All loose and de-bonded concrete/ screed shall be removed and proper repairing to be carried with polymer modified mortar. Washing the roof-terrace surface and making it dust free.(iii) The careful sealing of existing cracks & joints before the application is extremely important for log lasting waterproofing results. Clean concrete cracks / hairline cracks, of dust, residue or other condemnation. Fill all prepared cracks with acrylic flexible crack filler Dr. Fixit Cracks-X Paste OR Asian SmartCare CrackSeal OR Berger Homeshield Crackfill Paste.(iv) Cracks more than 5mm fill all repaired with Polymer modified cement sand mortar in the ratio of 1:3 duly admix with Dr. Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus @ 10% by weight of cement.(v) Pre wet the surface prior to application of primer and allow surface water to evaporate to make surface saturated dry (SSD) condition |
| 114 | (B) Bond Coat(i) Applying Dr Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus a SBR latex based bonding chemical used for repairs & waterproofing, at a ratio 1:1 one part chemical one part cement. Make sure bond coat is done properly and spreader evenly to the entire surface with brush or roller.(C) Pre-Coat Application(i) Applying one coat of Dr. Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus with cement @ 1:1.5 one part chemical, one and a half part cement and lay 45 GMS fiber mesh on still wet coat of URP. Make sure fiber mesh sticks to the surface evenly.(D) Primer Application(i) Apply one coat of acrylic based primer Dr. Fixit Primeseal Primer OR Asian PU Magnum Resin & Asian PU Magnum Hardner OR Berger SealOPrime (diluted with water in the ratio of 2:1) spreading at the rate of 8-10 /Sq.mt /Litre. Allow the primer to air cure for 4-6 hours. |
| 115 | (E) Coating Application(i) Stir well before use. Apply 1st coat of Dr. Fixit HydroShield PUD plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered.(ii) Allow the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90° to the first coat and 3rd coat at 90° to the second coat. Ensure there are no pinholes or air bubbles on the membrane surface.(iii) Apply second coat of Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/ Coat. Ensure there are no pinholes or air bubbles on the membrane.(iv) Apply third coat of Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/ Coat to achieve total dry film thickness of 800 to 1000 microns at forced coverage @ 2- 2.1 /litre/Sq.mt in 3 coats. Ensure there are no pinholes or air bubbles on the membrane.(v) Make sure glass fibre mesh is completely embedded. Surface should be smooth after the application. Check to see no void surface is left untreated / uncoated.(vi) All the concrete / masonry pedestals present on the roof, constructed for supporting the water tanks or pipe lines or dish antenna/solar panel, etc., also should be coated with extra coat of same material incorporating reinforcing fabric.(vii) Allow the system to air cure for 7 days prior to carry out ponding test.Note:- System comes with 10 years waterproofing warranty from Manufacturer or Authorized Applicator. |
| 116 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 117 | M&L for point wiring with and incl 1.5 sqmm (nominal area) PVC insulated multi-stranded copper conductor FRLSH in and incl PVC casing and capping ISI marked 20/30 mm size or as required at site incl with its fittings and fixture such as tees, bends, elbows and juction boxes all moduler type surface mounting etc with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing and common earth terminal complete all as specified and directed.Note :- Modular PVC Surface mounting boxes and for mounting switch ,socket with modular frame plate and cover complete all as specified and directed |
| 118 | (a) One light/Fan/Exhaust fan point controlled by one switch. |
| 119 | (b) One 3 pin socket outlet 5 Amps on independent board. |
| 120 | (c) One 3 pin socket outlet on same board. |
| 121 | M&L for wiring complete 2.5 Sq.mm single core multi standard copper conductor FRLS PVC insulated 650/1100 Volts drawn through non metalic rigid PVC casing capping including necessary accessories like bends lees and elbows etc fixed on wall/ceiling including sunken type pressed steel terminal boxes of suitable size with plastic laminated white/coloured top sheet cover 2 mm thick including 1.5 Sq.mm FRLS PVC insulated copper green wire for earth wire complete for 3/5 pin 15 Amps switch socket combination complete all as directed by Engineer-in-Charge. |
| 122 | S&F in repairs modular switch flush single pole one way 6 Amps. |
| 123 | S&F in repairs socket modular outlet 5 pin with gang box 6 Amps |
| 124 | S&F in repairs socket modular outlet 5 pin 15 Amp with gang box multipurpose. |
| 125 | S&F in repairs modular switch flush single pole one way 15/20 Amps. |
| 126 | S&F in repairs sheet metal single pole and neutral encloser with a two pin and earth plug and socket complete with one MCB SPN 20 amps, 240 V. |
| 127 | S & F in repairs Modular AC Box With 20A SP MCB, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top |
| 128 | Supply and fixing in repair of MCCB for DPX 415 Volts 100 Amps 4 pole with breaking capacity of 25 KA |
| 129 | Supply & Fixing in repairs vertical DB TPN 415 Volts 200 Amps rated bus bar having 4 way single door shutter. |
| 130 | Supply & Fixing in repairs Vertical DB TPN 415 Volts 200 Amps rated bus bar having 8 way single door shutter. |
| 131 | Supply & Fixing in repairs MCB DB SPN 240 Volts 200 Amps rates bus bar having 4 way double door shutter. |
| 132 | Supply & Fixing in repairs MCB DB SPN 240 Volts 200 Amps rates bus bar having 8 way double door shutters. |
| 133 | S&F in repairs MCB TPN 415 Volts of capacity 63 Amps complete all as directed by Engineer-in-Charge. |
| 134 | S&F in repairs MCB SPN 240 Volts of capacity 40 Amps complete all as directed by Engineer-in-Charge. |
| 135 | S&F in repairs MCB SP 240 Volts of capacity 5 to 30 Amps complete all as directed by Engineer-in-Charge. |
| 136 | S&F sub main wiring 4 Sqmm with three runs of 4 sqmm single core multi stranded copper conductor in PVC conduit including all fitting fixed on wall/ceiling including 4 Sqmm PVC insulated copper earth wire connected to earth including taking down, complete all as directed by Engineer-in-Charge. |
| 137 | S&F sub main wiring 6 Sqmm with three runs of 6 sqmm single core multi stranded copper conductor in PVC conduint including all fitting fixed on wall/ceiling including 6 Sqmm PVC insulated copper earth wire connected to earth including taking down, complete all as directed by Engineer-in-Charge. |
| 138 | Supply & fix in repairs recess mounted LED 15 Watt Ultra slim recess-mounting round LED downlighter designed with excellent thermally managed aluminium pressure die-cast housing with heat-dissipating fins for larger surface area finished in epoxy powder-coated white to deliver high-efficacy light output and uniformity, utilising edge-lit technology. |
| 139 | Supply & fix in repairs ceiling mounted LED light fitting 36 Watt Recess-mounting ultra-slim LED 2'x2' edge-lit tile in aluminium extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as directed by Engineer-in-Charge. . |
| 140 | Supply & fix in repairsceiling mounted LED light fitting 36 Watt surface panel ultra-slim LED 2'x2' edge-lit tile in aluminium extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as directed by Engineer-in-Charge. . |
| 141 | Supply & fix in repairs Wall mounted LED - 20 W Linear Aluminium High Lumens output LED batten made from aluminium extruded channel, powder coated with opaque diffuser for glare free light complete with accessories all as specified and directed. |
| 142 | Supply & fix in repairs Wall mounted LED batten 10 watt LED - Linear Batten made from Polymer extruded channel, with opaque diffuser for glare free light, complete with accessories all as specified and directed. |
| 143 | S&F in repairs LED lamp 9/10 W, 230V AC, 50Hz, cool white single phase with all fitting and fixing accessories complete all as specified and directed. |
| 144 | S&F in repairs LED inverter lamp 20 W, 230V AC, 50Hz, cool white single phase with all fitting and fixing accessories complete all as specified and directed. |
| 145 | S & F in repairs modular stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc. as reqd |
| 146 | S&F in replacement piano type switch single pole 230 volt flush type 5 Amps |
| 147 | S&F replacement piano type switch single pole 230 volt flush type 16 Amps.(Normal switch) |
| 148 | S&F in replacement switch socket combination with pvc gangbox 6/16 Amp as per existing ISI mark.(Normal type) |
| 149 | S&F in replecement switch socket combination with pvc gangbox 6 Amp as per existing ISI mark. |
| 150 | Supply and fixing in ,replacement ELCB 63 Amps, 4 pole |
| 151 | S & F in repairs Modular Metal flush box 3 module |
| 152 | S & F in repairsModular White cover plate 3 module |
| 153 | S & F in repairs Modular Metal flush box 6 module |
| 154 | S & F in repairs Modular White cover plate 6 module |
| 155 | S& F in replacement of PVC 3 Pin plug top 15 Amp complete as specified |
| 156 | S& F in replacement of PVC 3 Pin plug top 5 Amp complete as specified |
| 157 | M & L for Servicing of1200/1400 mm ceiling Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes and painting including replacing of un serviceable part like bearing gun metal bush condensor of suitable capacity and re-assembling the same and complete all as directed by Engineer-in-Charge. |
| 158 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories ,230 V, 1400 mm sweep copper winding Min air delivery 245 CFM with service value 7.9 BEE blade thickness 1.05 mm, insulation class B, frequency 50 Hz. Five star rated with brushless direct current motor (BLDC).Complete all as specified and directed. |
| 159 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50Hz RPM 1200, copper winding of sweep 250 mm complete all specified and directed by E-in-charge. |
| 160 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.Complete all as specified and directed. |
| 161 | Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 60/120 Ltr. Power consumption-1100-1450W.Complete all as specified and directed. |
| 162 | M & L for Servicing of 250/300/350mm Exhaust Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of un serviceable part like bearing gun metal bush condensor of suitable capacity and re-assembling the same and complete all as directed by Engineer-in-Charge. |
| 163 | Taking down unserviceable geysers of any capacity and make from each location by disconnecting and sealing all electrical and water lines for annual maintenance/servicing. Overhauling, dismantling the same for repair/replacement of unserviceable parts, including brazing to inner tank, cleaning, taking out sludge from inner tank and washing with cleaning solution and reassembling and refixing the same in each original location/ position, connecting all electrical and water connections including provn of 2.5 Sqmm 3 core sheathed multi-stranded copper conductor flexible cable from connector block to geyser and testing complete all as specified and directed. (NOTE (a) New parts shall be measured and paid separately under \\"Supply only\\" rates here-in-after. (b) Minor parts, if any, not mentioned in the schedule but required for smooth functioning of geysers are deemed to be included in the rate of the item.) |
| 164 | Supply only PVC inlet pipe, 15mm bore, 450 long including both end check /end nuts and washers. Make |
| 165 | Supply only PVC steel braided outlet connection pipe, 15mm bore, 450 mm long including both ends check nut & washer complete. |
| 166 | Supply only heating element of any type 1500 Watts. |
| 167 | Supply only heating element of any type 2000 Watts. |
| 168 | Supply only thermostat of any type suitable for 25 ltrs capacity geyser. |
| 169 | Supply only internal assembly complete with packing ring, bolts, nuts & washers suitable for 25 ltrs capacity geyser. |
| 170 | Supply only thermal cut off ISI marked suitable for 50/35/25 ltrs capacity geyser. |
| 171 | Supply only fusible plug made of brass having lead alloy fuse suitable for 25 ltrs capacity geyser. |
| 172 | M & L for painting geyser of capacity 25 ltrs complete, in situ, with two coats of synthetic enamel paint, white, by spraying including filling cavities with filler, denting after scrubbing down old paint using emery paper, cleaning, washing etc. and writing MES No complete all as specified and directed. |
| 173 | S&F in repairs change over 63 Amps 4 pole 415 V complete all as directed by engr-in-charge. |
| 174 | M&L for servicing/cleaning of solar water heating system of capacity 100/200/300 LPD evacuated tube collector/flate panel type incl water supply connection,electric supply connection,electric heating backup with minor defect of Electrical wiring heater, cold water storage tank and necessary fitting complete all as specified and directed by Engr-in-Charge. |
| 175 | S&F, Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm dia bore fixed complete to wall, ceiling or laid in floors complete all as specified and directed. |
| 176 | Supply and fix Bib taps 25 mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 177 | S&F heating elements of 2000 watt all as specified and directed |
| 178 | S & F of pressurized flat plate collector SS water storage tank of capacity 200 ltrs including dismantling existing unsv kept in custody for credit all as directed by Engr-in-charge Please Enable Macros to View BoQ information |
| 179 | S & F of pressurized flat plate collector SS water storage tank of capacity 200 ltrs including dismantling existing unsv kept in custody for credit all as directed by Engr-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender