Tender For Repair/ Maintenance To Hard Standing, Drains, Culvert, Footpath, Fencing, Compound Wall, Gate Pillars, Firing Range And Other Misc Works Sports Infrastructure, View Cutter Etc At Af Stn Mohanbari
Tender Value
35 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
20 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Hard Standing, Drains, Culvert, Footpath, Fencing, Compound Wall, Gate Pillars, Firing Range And Other Misc Works Sports Infrastructure, View Cutter Etc At Af Stn Mohanbari
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site to at any distance outside MD land complete all as specified and directed. |
| 2 | M&L for 75 mm thick Plain Cement Concrete 1:4:8 type D 2 (using 40mm graded stone aggregate) as in sub base of flooring/ hard standing ccomplete all as specified and directed. |
| 3 | M&L for PCC 1:2:4 type B2, (using 40 mm graded stone aggregate) 75 mm thick as in floors/hard standing etc laid in alternate panel and finished the cement concrete surface even and smooth without using extra cement complete all as specified and directed.Note:- Flooring shall be laid in alternate panel. |
| 4 | S&F for Glass dividing strips, 3 mm thick 38mm width and inserted in postion complete all as specified and directed. |
| 5 | M&L for 75 mm thick plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed. |
| 6 | M&L for Screed bed or bedding layer of 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 7 | M&L for footpath tiles of size 300 x 300 mm and 8-10mm thick of any colour and laid over 15mm thick screed bed in CM 1:4 and joited with grey cement slurry and joints shall be filled with white cement mixed to match the shade of the tiles complete all as specified and directed. Note : Screed bed to be measured and paid separately. |
| 8 | M&L for machine pressed precast concrete interlocking paver block of 60 mm thickness in any shape and size conforming to IS-15658-2006, M-40 Grade fix with grey cement and pigment complete all as specified and directed. |
| 9 | M&L for sand cushioning under interlocking paver blocks including watering and consolidation complete all as specified and directed. |
| 10 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 11 | M&L brick work with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 12 | Taking down cement plaster from walls, any description including racking out joints, hacking for keys,scrubbing down with water etc to receive new plaster complete all as specified and directed. |
| 13 | M&L for rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces and finished the surfaces even and fair complete all as specified and directed. |
| 14 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint camouflage pattern over a coat of primer complete all as specified and directed. |
| 15 | M&L for providing Plain Cement Concrete 1:2:4 type B1 (using 40mm graded stone aggregate) as in benching of surface channels and drains complete all as specified and directed. |
| 16 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 17 | M&L for Precast RCC (1:2:4), nominal mix, Type B-1 uising 20 mm graded stone aggregate as in cover slab of drain etc set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement shall be measured and paid seperately |
| 18 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 19 | M&L for Mild steel TMT bars 6 to 8 mm dia as in reinforcement cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 20 | Demolition of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid bedded and pointed in any mortar complete all as specified and directed. |
| 21 | M&L for brick work with using sub class 'B' old size bricks, laid flat on sloped sides of drains or in any other situation pointed in cement mortar 1:6 without any bedding surface and flush pointing complete all as specified and directed. |
| 22 | Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped end etc complete all as specified and directed. |
| 23 | M&L for continuous brick edging with old sized bricks with width equal to the length of the brick, of well burnt bricks, laid dry on edge and pointed in cement mortar 1:6 for drains or in any other situation and without any sand cushioning etccomplete all as specified and directed. |
| 24 | Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed. |
| 25 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde E250) quality-B complete all as specified and directed. |
| 26 | M&L for framed work such as grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars, barred iron door, ladders, framed balusters, walk ways, railing, framework of water tanks and similar work conforming to Fe. 290. Gde E-165 complete all as specified and directed. |
| 27 | S&F for Mild steel Angles, bars, flats etc, as in supports for stiffening of fencing post struts, wall ties, hold fasts, clamps and similar small articles confirming toFe 290 Gde-E-165 including dismantling of MS steel complete all as specified and directed. |
| 28 | S&F for Mild steel screw bolts (machine made) length of neck n.exc 15mm with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and directed. |
| 29 | Supply only Chain link fencing MS galvanised in any shape and size complete all as specified and directed. |
| 30 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 31 | M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in foundations filling of fencing post including necessary exc, removing of soil etc complete all as specified and directed. |
| 32 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 33 | S&F for Mild steel bolts of dia n exc 12mm, purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long including drilling hole in iron post complete all as specified and directed. |
| 34 | Dismantling expanded metal, any thickness or mesh, n.exc 4 kg/ Sqm fixed with steel or wood fillets, if any complete all as specified and directed. |
| 35 | S&F for Welded steel wire fabric n.exc 4 kg per sqm supplied and fixed complete to wood or steel members and fixed complete to wood or steel members complete all as specified and directed. |
| 36 | Dismantling posts or struts (wood, steel or RCC.) any section embedded in natural ground, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 37 | S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed. |
| 38 | Excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed. |
| 39 | M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in hold fast block, filling in pressed steel chowkats, post holes including necessary form work etc complete all as specified and directed. |
| 40 | M&L for Fe410-W (Gde-250)quality B roof truss (framed), trussed, prulins.crane gantries, rails and fasteining and heavy bracket framing (beams,tee,angle,channel,or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 41 | M&L for girder or single stanchion ,built up of one beam or channel section with flange plates,caps,bases ,splices,angle brackets,cleats and other connections complete all as specified and directed. |
| 42 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof/ fencing/ view cutter coverings complete all as specified and directed. |
| 43 | S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet .50 mm thick of camouflage pattern having tensile strength of 550 mpa as in roof covering /ridge /cladding to wall, fixed with self tapping screw (heavy duty) with in built washers and neoprene and EDPM washers ,in roofs,walls etc complete all as specified and directed. |
| 44 | S&F for pre painted galvalume aluminium zinc coating GI based plain steel sheet .50 mm thick of camouflage pattern having tensile strength of 550 mpa as in ridges ,hips,valley gutter,drip or straight fastening etc fixed with self tapping screw etc complete all as specified and directed. |
| 45 | M&L for Providing, plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 46 | M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement mix with pigment to match the shade of granite stone including grinding and polishing complete laid over and including 15 mm thick rendering of cement mortar 1:4 complete all as specified and directed. |
| 47 | M&L for provn of 600mm dia punched tape concertina coil fixed in repairs complete all as specified and directed. |
| 48 | M&L for Stainless Steel Logo is a high-quality metal emblem 10 to 50 mm thick of 0.70 m height and 0.4 m width not exc 0.50 sqm for fixing on wall including necessary fittings complete all as specified and directed. |
| 49 | M&L for Stainless steel letters of 10 to 50 mm thick of 0.30 m height and 0.20 m width for fixing on wall including necessary fittings complete all as specified and directed. |
| 50 | M&L for RCC (nominal mix ) as in columns complete all as specified and directed. |
| 51 | Use and waste of formwork to sides of pillars,posts,struts,piers,columns and stanchionsfor fair finished surfaces complete all as specified and directed. |
| 52 | S&F for 0.90 x 0.60 mtr display board made of 3mm PVC sheet with reflective sheet pasted back to back on 3mm ACP Sheet with writing/ symbols given by Engr-In-Charge and including fixing to hollow tubes and taking down old boards of any type complete all as specified and directed. |
| 53 | Supply only saw dust for filling for stop butt wall complete all as specified and directed. |
| 54 | Supply only sand for filling stop butt wall complete all as specified and directed. |
| 55 | Taking out old U/S mixture of saw dust and sand from site including disposing the same at low laying area and lead exc 500 mtr and n.exc 1000 mtrs complete all as specified and directed. |
| 56 | Labour only for mixing mixture of sand and saw dust and filling and ramming upto depth/height exc 2 feet and n.exc 5 feet complete all as specified and directed. Material and labour laying well burnt old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender