Tender For Addn/ Altn To Old Sho Complex, Provn Of Commercial Power Supply For Aws Site At Af Stn Dinjan And Provn Of Chain Link Fencing Around The Transformer & Electric Distribution Pt At Nepalipatti Of Asc Bn Under Ge (Af) Mohanbari
Tender Value
19 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
20 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn To Old Sho Complex, Provn Of Commercial Power Supply For Aws Site At Af Stn Dinjan And Provn Of Chain Link Fencing Around The Transformer & Electric Distribution Pt At Nepalipatti Of Asc Bn Under Ge (Af) Mohanbari
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deepa dn averaging 15cm deep and geeting out in soft/ loose soil complete all as specified and directed. |
| 2 | M&L for hard core of broken stone or boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 3 | M&L for 100mm cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate) for sub base complete all as specified and directed. |
| 4 | M&L for Providing cement concrete 1:2:4 type B-1 using (20mm graded stone aggregate) in roof kerbs of mud stops, rounded or chamfered on edges of tiled path complete all as specified and directed. |
| 5 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 6 | M&L for machine pressed precast concrete interlocking paver block glossy finish any shape & size with grey cement & pigment conforming to IS-15658-2006 of 80mm thickness M-35 grade complete all as specified and directed. Note: -(a) The make, colour shade, size & pattern of paver blocks shall be approved by GE in writing before procurement.(b) Blocks shall be laid from one end keeping gap of 1 to 2mm between blocks and the gap shall be filled with sand complete all as specified and directed. |
| 7 | Dismantling floor hearth or wall tiles including cement mortar (but not backing) removing serviceable tiles to store and rubbish oo the premises complete all as specified and directed. |
| 8 | M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles exc 0.42 Sqm but n.exc 1.00 Sqm in floors etc set and jointed in near cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for point wiring with 1.5 Sqmm cable PVC insulated and unsheathed copper multistranded conductor (FRLS) 1100 Volts grade cable (red colour cable to be used for Phase connection and black colour cable to be used for neutral connection) including PVC concealed conduit with all accessories including 1.5 Sqmm copper multistrand conductor FRLS 1100 volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.2 mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick hylum laminated sheet cover complete all as specified and directed as following: - |
| 10 | Light/ fan / exhaust fan/ bell point |
| 11 | S&F for ceiling rose 3 phase/ PVC/ polycarbonate, isolated body, surface type with ISI marked complete all as specified and directed. |
| 12 | S&F for switch piano flush type 5/6 Amps, 240 volt single pole one way complete all as specified and directed. |
| 13 | S&F for step type electronic fan regulator flush type 230 volt 5 speed control and connecting up and fix position complete all as specified and directed. |
| 14 | S&F for ceiling fans complete with blades, down rods and accessories 230volt, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 15 | S&F for exhaust fan, steel body AC single phase, 230 Voltof size 300mm sweep 1400 RPM and min air delivery 1850m3/h with blades and frame and louvers complete all as specified and directed. |
| 16 | Supply and install hi wall split units indoor/ outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5TR complete all as specified and directed. |
| 17 | S&F for factory made sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete including one MCB, SPN, 20 Amps, 240 volts KA complete all as specified and directed. |
| 18 | S&F for voltage stabilizer for automatic operation, single phase neutrally air cooled indoor type & designed for input variation between 130 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% and capacity 4 KVA complete all as specified and directed. |
| 19 | M&L for spreading of hardcore of broken stone or boulders of gauge n exc. 63 mm, depositing, spread and levelled in layers n.exc 15 cm thick waterded and rammed to a true surface complete all as specified and directed. |
| 20 | M&L for construction of PCC foundation platform with PCC 1:4:8 type D 2 using 40mm graded aggregate for foundation of poles, angle iron posts including necessary formwork complete all as specified and directed. |
| 21 | M&L for excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard/dense soil complete all as specified and directed. |
| 22 | S&F for rolled mild steel in joist, channels, angle or Tee sections fixed independly without connecting plates etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated), confirming to Fe 410-W (Gde -E-250) quality -A complete all as specified and directed. |
| 23 | M&L for preparation of new or previously untreated steel surface of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint (Ist quantity) over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 24 | Supply only chain link fencing 3.8 mm dia galvanized PVC coating wire (50x50) mm mesh made upto matress lapped wire and laid on postion/fixed on poles complete all as specified and directed. |
| 25 | Straining and fixing only chain link fencing to angle iron posts fixed with MS flat and 3 Nos of 10 mm dia MS round bar as including line wires, any mesh size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 26 | S&F for mild steel bolts (machine made) hexagonal or square head at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square 11 to 15 mm dia exceeding 5cm & n.exc 10cm long nut, the other end to be embedded in RCC fencing post while casting complete all as specified and directed. |
| 27 | S&F for MS flat iron hold fast for securing wire mesh and similar small articles, cut to length, bent to shape, drilled hole including all necessary drilling, bolting and fixed with screw etc. conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 28 | M&L for mild steel round bars 6 to 8 mm dia cut into length bend to shape required including cranking bending spirally for hooping for columm, hooking ends and for strirrups spacers and binders binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 29 | M&L for framed work as in door or gates of angle or other section with gusset plates, rails, braces, locking system etc complete, drilled for fixing of steel sheeting or other convering door, etc. to be prepared of hanging or sliding with an including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other convering, running rails and guides) and hanging also fastening and fixing, conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and directed. |
| 30 | Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr deep for taking out/ laying of under ground cable, pole, pipe, stay and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath/ pavments complete all as specified and directed. |
| 31 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm spread any type of soil complete all as specified and directed. |
| 32 | Removing excavated materials n.exc 50 mtr and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified and directed. |
| 33 | M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable complete all as specified and directed. Note: Punned thickness of sand shall be measured & paid. |
| 34 | M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick complete all as specified and directed. |
| 35 | Supply, fixing/ laying, testing and connecting of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor of size 16 sqmm 4 core, 1100 Volts grade laid in trenches/ on wall/ poles/ ducts/ pipe including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and directed. |
| 36 | M&L for boring/ drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing GI tubing 40 to 50mm bore complete all as specified and directed. |
| 37 | S&F in replacement GI protection pipe of 50 mm dia light grade for cable protection including all fittings laid in trenches or fixed on pole/ walls with mild steel clamps, bolts, nuts and washers complete all as specified and directed.Note:- Earth work shall be measured and paid separately. |
| 38 | S&F in replacement of cable junction box IP 66 weather proof for outdoor installation (with metric knockouts for cable entry) size 205 x 255 x 112 mm suitable for 16/25 sqmm cable fixed with suitable MS angle,FI clamp 20X3 mm nuts, bolts and washers including provision of TPN MCB of capacity 63 amps, 415 volts complete all as specified and directed. |
| 39 | S&F in replacement of cable junction box IP 66 weather proof for outdoor installation (with metric knockouts for cable entry) size 205 x 255 x 112 mm suitable for 16/25 sqmm cable fixed with suitable FI clamp 20X3 mm nuts, bolts and washers including provision of 415 volts100 Amps aluminium bus bar/ connector complete all as specified and directed. |
| 40 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6.3mm thick elecrode and 4 mm dia galvanised wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI wire 4.0 mm dia as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 20 mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed. Material and labour laying well burnt old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender