Tender For Providing Infiltration Well With Pumpset In Seelaipillayarputhur Cauveri River At Kattuputhur Town Panchayat
Tender Value
30 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
9 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Infiltration Well With Pumpset In Seelaipillayarputhur Cauveri River At Kattuputhur Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation above Water Level in light or sandy or clayey soil for infiltration well of 3.50 m dia (Internal) including levelling the site with an initial lead of 10m and as directed by the departmental officers - Excavation for Infiltration well for first depth of 2.00 m SOR.2024-25, P-151 - VOL -II, WD-W0080 (Area=3.14x4.50 2 )/4 =15.90 m 2 . |
| 2 | R.C.C M 30 Design mix using 20 mm and 10mm size H. B.G stone (machine crushed) including mixing concrete using machanical mixer machine and vibrating with machanical vibrator, but excluding cost of steel reinforcement, fabrication and placing the grills in postion and the cost of centering and strutting but including curing, finishing etc., complete as directed by the TWAD Board Officers. |
| 3 | Sinking of infiltration well of 3.50 m internal dia and 4.50 m external dia below water level including all incidental charges using special tools and plants such as air compressor, helmet etc., complete including bailing out water below pilasters level (SOR.2024-25, P- 154) |
| 4 | I depth of 2 m |
| 5 | II depth of 2 m |
| 6 | III depth of 2 m |
| 7 | IV depth of 2 m |
| 8 | V depth of 2 m |
| 9 | Porous Concrete CC 1:4 (one cement ,four hard broken granite jelly of size 20mm) for steining of infiltration well excluding cost of centering but including curing etc complete and as directed by the TWAD Board Officers |
| 10 | Brick work in CM 1:5 (one cement and five sand) using country bricks for steining of 45 cm thick for infiltration well including ,curing, etc., complete and as directed by TWAD Board Officers. |
| 11 | Centering for plane surface or circular curved surfaces including strutting upto to required height using MS sheets of size 90cm x 60cm and BG 10 gauge stiffened with welded MS angle of size 25mm x 25 mm x 3mm laid over silver oak (Country Wood) joists of size 10cm x 6.5cm (Spaced at about 90cm centre to centre) and supported by causrina props of 10cm to 13cm dia. (Spaced at 75cm centre to centre) complying with standard specification as per TWAD Board Officers -including the cost of strutting shuttering and all labour charges at Different levels |
| 12 | For plane surface |
| 13 | For curved surface |
| 14 | Supply, delivery fabrication and placing in position of RTS rods for reinforcement for binding ring, pilasters, roof slab and well curb including cost of binding wire and as directed by TWAD Board officers. |
| 15 | RTS Rod |
| 16 | Plastering inside of well steining by CM 1:3 (One cement and Three sand ) 12mm thick including curing etc., complete and as directed by TWAD Board Officers. |
| 17 | Plastering outside of well steining by CM 1:5 (One cement and five sand ) 20 mm thick including curing etc.,complete and as directed by TWAD BoardOfficers. |
| 18 | Supply, delivery and fixing in position 50mm thick RCC manhole cover slab of size 0.60x0.60m with necessary reinforcement and MS angle of size 50mmx50mm x 6mm thick fixed alround the edges of the slab complete and as directed by the TWAD Board Officers. |
| 19 | Supply, delivery and fixing of PVC moulded CI steps in position at 30 cm center to center in zig zag manner and as directed by the TWAD Board Officers. SOR 2024-25, P - 176 |
| 20 | Providing ventilation arrangement by fixing in position 160mm OD PVC 6KSC pipe with PVC cowl and as directed by the TWAD Board officers. |
| 21 | Labour charges for putting bore holes of size 3\\" to 4\\" in river bed in sandy and other loose soils using hand boring sets including yhe cost of hire charges , coveyance charges of hand boring sets , collection of soil sample at frequent intervals and as directed by TWAD Bd. officers (Vide Page .207 of SR Book 2024-25) WD-W0920, VOL II |
| 22 | Providing for cutting edge using 12G MS sheets including the cost of fabrication welding and placing in position in the curb including supply of the MS sheet with necessary holding rod of 20mm dia. |
| 23 | Painting two coats with approved cement paint over one coat of primer over the cement plastered exposed wall surface and side of roof slab and complete as directed by TWAD board Officers |
| 24 | Plugging the bottom of the well with coarse sand (Pebbles) of approved sizes and grade as directed by the Board officers |
| 25 | Supply and delivery of Openwell Submersible pumpset conforming to IS 14220 /94 capable of discharing the following duties due to all causes . The pump shall be with stainless steel shaft and dyanmically balanced bronze mixed type impeller and brass screws with ISI mark,. The pump suitable for installation insump. with 1.1KV.grade 3 core suitable copper flat submersible cable to a length of15metres with necessary cable joints. |
| 26 | The non-return valve located at the top of the pump in the diacharge outlet connection is to be designed with minimum friction . The pump should be directly coupled to 2880 rpm, 3 phase, 50 Hz, 415V+6% & 415V-15% squirrel cage induction motor suitable for ATS starting and for continuojus operation The pumpset should be provided with 5m length of suitable size PVC insulatsed copper flat cable for connecting the pumpset, starter & Isolator.including cost of item 1.B |
| 27 | Duty 1250 lpmx 40m head |
| 28 | Supply and delivery of Fully Automatic Auto Transformer Starter suitable for the motor offered. Floor mounting type air/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV and as amended therafter for operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%) with the following components, under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/ OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc. |
| 29 | Fully automatic air break ATS for 20 HP For I.W- I. |
| 30 | Supply delivery of 150 mm dia pressure gauge for delivery of Submersible pumpsets with red marking G.M cock and copper impulse tube etc., to be fixed on teek wood board to be mounted on the wall of the pump house. The maximum rating should be 1.5 times the shut off head of the pump. |
| 31 | . Supply, delivery of 1.1 KV gradde, 3core PVC insulated PVC sheathed, armoured2.5 sq mm Aiuminum conductor cable with ISI marking conforming to IS 1554 of reputed make to be laid connecting Isolator and starterthrough DB and Change Over Switch. |
| 32 | 50 sq mm cable.( Length in Metre) For I.W.- I |
| 33 | Laying the above cable from Isolator of Sump and starter with necessary earth and refilling where ever necessary and proper anchoring etc. complete |
| 34 | 50 sq mm cable.( Length in Metre) For I.W.- I two run |
| 35 | Jointing the above cable between the MV switch board outgoing to the Isolators through Change Over Switch and the starters. |
| 36 | 50 sq mm cable.( Length in Metre) For I.W.- I |
| 37 | Supply and delivery of G.I. Medium class pipes and specials as per relevant IS as listed below |
| 38 | 100 mm GI PIPE (3m length) Medium for Pset errection |
| 39 | 100 mm GI pipe (3m length) Medium |
| 40 | 100 mm GI bend (Heavy) |
| 41 | 100 mm GI Flange set (Heavy) |
| 42 | 100 mm MS clamp set |
| 43 | Supply and delivery of C.I. pipes and specials as per relevant IS as listed below. Common Delivery Line. ( Size ) |
| 44 | 150 x100mm CI D/F TAPER (2Nos ) ( Weight in Kg ) |
| 45 | 100 mm CI D/F Pipe 90 bend ( Weight in Kg ) |
| 46 | 100 mm CI D/F Pipe 1m length ( Weight in Kg ) |
| 47 | 100 mm CI Flanged pipe 3 m length ( Weight in Kg ) |
| 48 | 100 mm CI Flanged T (2No ) ( Weight in Kg ) |
| 49 | 100 mm CI D/F Reflux valve -Waer type ( Dual plate check valve) conforming to IS |
| 50 | 100 mm CI D/F Sluice valve - Non raising spindle types to pressure rating of 1.6 PN to be used in pump houses (Long body / Long face to face) confirming to IS |
| 51 | Erection and commissioning of Submersible pumpsets in collector well including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches ,starters ,voltmeter,Ammeter,three pilot ( indicating ) lamps,capacitor,single phasing preventor,water level guard and laying and jointing the cables and twin earthing as per IE rules etc.,complete and testing the pumpset and trail run for 10 days. |
| 52 | Upto 20.0 HP for I.W.-I |
| 53 | Earthwork excavation above water level in light or sandy soil for pipeline as anchorage arrangement pipeline and connected works including refilling complete and as directed by the Officers. |
| 54 | Lowering of CI Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the Officers Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender