Tender For Comprehensive Repair/Maintenance Of Bldgs, Connected Paths, Tiling, Flooring, Plinth Protection And Other Misc Repair Of Work In Abhm, Abhm Annexe, Md Offrs Acc At Sp Marg And Ihq Of Mod (Army) Tpt Unit Asc Under Ge New Delhi
Tender Value
75 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
23 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair/Maintenance Of Bldgs, Connected Paths, Tiling, Flooring, Plinth Protection And Other Misc Repair Of Work In Abhm, Abhm Annexe, Md Offrs Acc At Sp Marg And Ihq Of Mod (Army) Tpt Unit Asc Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | M & L for super gloss/ hi gloss vitrified tiles of approved colour and design in flooring of size 600mmx1200 mm etc. as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM (1:6) Complete all as specified and as directed. |
| 3 | M & L for supper gloss/ hi gloss vitrified tiles of approved colour and design in vertical surfaces 600mmx1200 mm including provision of high lighter tiles/boarder and set & jointed in neat cement slurry and pointed in colored 2T adhesive to match over incl Master bond OBL-315 Powerfix polymer modified adhesive with enhanced high bond polymers for fixing wall tiles Having classification C2TE accod to European norms as per IS 15477-2019 Type 2T adhesive complete all as specified and directed by Engr in charge. |
| 4 | M&L for light shade Vitrified tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM (1:6) Complete all as specified and as directed. |
| 5 | M&L for light shade Vitrified tile 8 to 9mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 6 | M&L Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed. |
| 7 | M&L Glazed ceramic walls tiles coloured (300 x 600 mm/300x450), 7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer. |
| 8 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete as in levelling of floor etc all as specified and as directed. |
| 9 | Demolition of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in cement mortar complete all as specified and directed |
| 10 | M&L for 18 to 19 mm thick Granite (of any type and colour) work (table rubbed and polished) in steps, jambs, pillars, window-cills and cooking platforms including 15mm thick screed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl all moulding etc complete all as specified & as directed. Note : Single piece granite shall be provided in steps/tread |
| 11 | Demolition of brickwork ,stone/boulder masonry built in cement mortar including all quoins, pillars etc by breaking up or down, separation of serviceable material from the unserviceable,incl removing the demolished material outside the MOD land. |
| 12 | M&L for old size brick work with sub class \\"B\\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to seven story Bldg) complete all as specified. |
| 13 | M&L for old size brick work with sub class \\"B\\" bricks , straight or curved on in half brick thick wall built in cement mortar (1:4),(up to seven story bldgs.) complete all as specified. |
| 14 | M&L for drilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite/quartz all as specified and directed. |
| 15 | S&F in repair 1mm thick stainless steel sink with drainage board, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 16 | S&F in repair kitchen sinks made of stainless steel lmm thick with plugs, washers and wastes with 32mm dia HDPE waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 17 | S&F in repair Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions all as specified. Make Jaquar ARI-39309 , Make : Kohler Cat No 20591 IN-CP,CERA Cat No F1015501, Hindware Cat part No-F280020 |
| 18 | S&F in repair 3 in 1 concealed single lever shower mixer, Shower System, 300mm Shower with arm, hand shower 1m to 1.2m connection and one spout with 10 layer surface finished, Shower System owns a modern and stylish look . Excellent plating technology prevents the coating from falling off, after a long time use still keep the surface smooth and clean will all connected items all as specified by manufacture. Make Jaquar Cat No ORP-10125PM , Hindware Cat No F570022CP, KOHLER K-98754IN-4-CP, CEARA cat No F1015403-2891 |
| 19 | S&F in repair Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, including Exposed and Concealed Part (diverter) Cartridge Sleeve, Wall Flange, Nipple & Spout suitable for basin including all fittings all as specified.Make Jaquar cat part no OPP-CHR-15233NKPMM & ALD-235N, Kohler Cat No K-22540IN-4ND-CP, Hindware Cat Part No F570029CP, CERA Cat No F4065103 |
| 20 | S&F in repair Bib tap (spout) while with Wall Flange including taking out old existing all as specified and directed Make Jaquar Model : code No OPP-15037PM, Hindware Cat Part No F340004CP, KOHLER Cat No : K-16093IN-4-CP, CERA Cat No F1013151 |
| 21 | S&F in repair Angular Stop Cock/angle valve with Wall Flange all as specified and directed Make : Jaquar model OPP-CHR-15053PM, Hindware Cat Part No F570043CP, KOHLER Cat No 11568IN-7BCP, CERA CAT NO F1015201 |
| 22 | S&F in repair bib tap standard of CP any colour high pressure screwed for iron pipe and fixed to 15mm bore. |
| 23 | S&F in repairs PVC Connection pipe 15 mm dia and 600mm long complete all as specified. |
| 24 | S & F in repair stainless steel plate rack of size 60x60x25cm made with 1.0mm thick sheet including taking out existing plate rack complete all as specified and directed |
| 25 | S & F Vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete. Squatting pan including connection to trap, and to flushing pipe, anti-siphonage pipe, etc. complete including making good to floor complete. |
| 26 | S&F in repairs low level dual flushing cistern of 10 ltrs capacity PVC valveless, dual tank , syphonic action type, white with inlet ball valve float and handle, bracket complete all as specified. Make , (Make:HINDWARE/JAQUAR/CERA) |
| 27 | S&F in repair Vitreous China rimless wash down water closet pan single piece symphonic action, white, including soft close sheet cover of closed pattern with flat bottom complete all as specified and directed.Make: Hindware Cat part No/ Jaquar Cat No Part WC OPS-WHT-15853S300UF/ Kohlar Cat Part No 77739T-SL-0/ Cera cat Part No A1014110 |
| 28 | S&F in repair wall/ floor mounted bath room vanity unit of overall size 600x450x450 (approx) with multiple cabins with outside openable two shutter made of water proof coating/ items/ with two nos of 100mm stainless steel handle with hinges and auto closing and 16-18mm thick black polish granite with counter type complete all as specified and directed |
| 29 | S&F in repair for Table Top white ceramic basin of approx Size: 50x40 cm table mounted type including cuplink with stainless steel bottle trap of 32mm size with 250mm long bottle trap and all fittings to proper functional condition complete all as specified and directed.Make: Jaquar Cat Part No JDS-WST-25911/ Hindware cat Part No 91238/ CERACat Part No S2020153/ Kohler Cat Part No K-31459IN-0 |
| 30 | S&F in repair Health faucet Chromium plated brass with 1.50 m long flexible pipe for WC Make: Jaquar Cat Part No ALD-CHR-573/ Hindware cat Part No F160192CP/ KOHLER Cat Part No 12927IN-CP/ CERA Cat Part No F8030107AB |
| 31 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified. Make: CERA cat part no.F5004106, Jaquar Cat No ACN-1131N, |
| 32 | Taking down (Door/window) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete. |
| 33 | Taking down (Door/window) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete. |
| 34 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and removing from site. |
| 35 | Taking down and refixing of shutters of size exc 1.00 sqm but n exc 2 sqm in same opening including all necessary adjustments to fit the shutter with frame like easing of shutter for easy closing /opening, tightening of hinges or changing the position of hinges adjustments of tower bolts, Sliding bolts etc complete all as specified and directed. |
| 36 | S&F factory made uPVC white colour fixed glazed window/ventilator made of ( small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension ( Area upto 0.75 sqmtr) comprising of uPVC multichambered frame and mullion (wherever required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile shall be acceptable variation in profile shall be acceptable variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 37 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body it single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass and wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 38 | S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing. |
| 39 | S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of wood grain PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90) degree used and joined together with solvent cement, all as specified. |
| 40 | S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 41 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 42 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 43 | M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with leaping and edge bending in factory of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 44 | M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with leaping and edge bending in factory of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 45 | M&L for providing 35mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with leaping and edge bending in factory consisting of Density 650 Kg /cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). “the door should holding capacity wpc to be laminated wpth PVC foil of min 14 micron thick of approved design pasted with hot melt adhsive on both faces of shutter. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardware should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 46 | Dismantling wrought iron or mild steel/ iron work of any description (steel window & Grill) complete all as specified and directed. |
| 47 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesetc confirming to Fe 410-W (grade -E-250) quality A complete all as specified and directed. |
| 48 | M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified. |
| 49 | Taking out old serviceable glass of any description exc 1.05 sqm, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size, hacking out old putty or removing beads etc, incl making good breakages in taking out and handling removing to store or stacking for reuse |
| 50 | S&F 4.80 mm thick tinted glass selected type quality n exc 0.5 Sqm in each pane for aluminum doors/ windows including rubber gasket/neoprene pad etc complete all as specified and directed. |
| 51 | S&F 4.8 mm thick tinted glass selected type quality exc 0.5 Sqm in each pane for aluminum doors/ windows including rubber gasket/neoprene pad etc complete all as specified and directed. |
| 52 | S&F 4.80 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 53 | S&F stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples . |
| 54 | S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified. |
| 55 | M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified. |
| 56 | M&L for two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer incl preparation of surfaces over 10 cm width of girth. |
| 57 | S&F 100mm long (size) butt hinges, heavy weight stainless steel AISI 304 grade with brass/bronze hinge pin complete all as specified and directed |
| 58 | S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed. |
| 59 | S&F 300mm long,stainless steel AISI 304 grade , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts and fixed, complete all as specified. |
| 60 | S&F 150mm long stainless steel barrel tower bolt of extruded section, complete all as specified. |
| 61 | S&F 150mm size stainless steel AISI 304 grade fancy type handle complete all as specified and directed. |
| 62 | S&F stainless steel AISI 304 grade floor door stopper with twin rubber shoes double door stopper 75 mm long complete all as specified and directed. |
| 63 | S&F 100mm long extruded fancy D' type type SS handle for kitchen cup boards shutters, cabinets, crockery shelf drawers fixed with nuts , screw and washer complete all as specified. |
| 64 | S&F 150 mm ordinary helical door springs incl roller & roller plate complete of mild steel. |
| 65 | S&F mortice lock of size min 100mm with Brass fancy type and vertical type 4 levers with key in duplicate (Make : Harrison/Godrej/Link/Door set) complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 66 | S&F mortice lock of size min 100mm with Brass fancy type and vertical type 4 levers with key in duplicate (Make : Harrison/Godrej/Link/Door set) complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender