Tender For Provn Of Sanctioned Works At Domestic Area And Technical Area Under The Aor Of 230Su
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
16 days left
EMD
19406
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Sanctioned Works At Domestic Area And Technical Area Under The Aor Of 230Su
BOQ
| Sl. No. | Item Description |
| 1 | S&F Steel work in tubular sections (rectangular , round , square) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 all as specified and directed by EIC. |
| 2 | S&F Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates all as specified and directed by Engr-in-Charge . |
| 3 | Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed by EIC. |
| 4 | M & L for PCC (1:3:6) type C-2 with using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed |
| 5 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 6 | M&L MS plate(plain or chequred)channels,square cut or notched (ordinary and counter sunk)forming holes, without any attachment also fastening and fixing complete all as specified and directed by EIC. |
| 7 | S&F mild steel bolts purpose made with hexagonal or square head one end and screwed the other , or screwed both ends; each screwed end to be fitted with washers and one hexagonal nut exc.60cm long , having dia not exc 20mm all as specified and directed by EIC . |
| 8 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width or girth not otherwise described including preparation of surface complete all as specified and directed. |
| 9 | M&L for Brick work with sub class \\"B\\" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed by EIC. |
| 10 | M&L for rendering 15mm thick cement plaster in cement mortar (1:4) with finished even and smooth without extra cement complete all as specified and directed. |
| 11 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggr as in sub base/foundation all as specified and directed by engineer in charge. |
| 12 | Material and labour, preparing of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 13 | Supplied & fixing steel windows or ventilators, fixedtype, with glazing bars all as specified and directed by Engr-in-Charge |
| 14 | S&F Sheet glass 3mm thick ordinary quality and glazing with oil putty in squares in n.exc 0.5 sqm in each panes complete all as specified and directed by Engr-in-charge. |
| 15 | S & F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staple. |
| 16 | Supply , Installation and commissioning and user training of Grease separator made of polyethylene as per EN 1825 DIN 4040-100 ;for underground installation; overall dia of 1380 mm.; with ventilation provision; emptying via suction , Standard odour tight top cover of 610 mm dia. clear opening; frame made of concrete material and cover made of cast iron; upper section made of polymer , height and level adjustment with cover of class B in accordance with EN124 all as specified and directed by Engr-in-Charge . Inlet and outlet dia: 110 mmMake: KesselNominal Size: NS 4Grease Storage: 160L, Sludge Storage: 400L, Overall Capacity: 770L Note -i) Contractor will remove all the waste and debris out of defence land.ii) Excavation for installation , demolition of PCC etc will not be paid seperately . |
| 17 | M&L for Excavating in trenches, (Soft/Loose soil) n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed. |
| 18 | M&L for removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point and disposal. |
| 19 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard dense soil. |
| 20 | M&L for Cutting into existing manholes for connecting new drains 150mm internal dia old pipe and making good to pipe and rendering cutting out existing benching for forming branch channel (1/2 Band to 3/4 section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished, and reforming benching as required for removing existing branch drain , making good to wallling and rendering cutting out branch channel , making good benchings all as specified and directed by Engr-in-charge. |
| 21 | M&L for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 110mm dia pipe complete all as secified and directed |
| 22 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches or in floor and in sewage soil waste or in rain water complete with necessarry connected items like bend and tee etc as required all as specified and directed by Engr-in-charge. |
| 23 | Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender