Tender For Road Furniture Work At Municipal Council Dungarpur (Raj.)
Tender Value
15 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
8 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dungarpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Furniture Work At Municipal Council Dungarpur (Raj.)
BOQ
| Sl. No. | Item Description |
| 1 | SITC of Crystal control Road warning Blinker system with solar panel module with 300mm LED Module of minimum 190 Nos., Blinker Units, Charging circuit, suitable SMF Rechargeable Battery (12 Volt), including wiring, connections etc. complete in all respect. |
| 2 | Providing and fixing of ultraflex / Duraflex post with base- The body of the post should be made of virgin special material PU (Polyurethane) it should be bright colour & high quality reflective for greater visibility in day and night. three bands of heat transfer tape should be pasted on post through heat transfer pasting technology for better and clear visibility in the night the base of the post should be fixed on the road surface with the help of four nails and special epoxy bond. For fixing of the post in base specially metal pin should be provided height of the post 900mm including base heat transfer tape 70-75mm x 3 nos inner dia of the post 75mm and outer dia 78mm, base dia 195mm, pin for fixing base 1nos, having 115mm length and 8mm dia, nails of fixing 4 nos, having 100mm length and 10mm dia, total weight of the post with base should not less than 1300 grams the post should be tested for material identification for polyurethane (PU) as per Cipet method its filler content should be 0.1786 % as per ISO3451, its tensile strength should be 3.46N/sq mm as per ASTMD 638 its melting point should be 194 degree Centigrade as per IS 5762 1970 Complete in all respect as per direction by Engineer incharge |
| 3 | Providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 4 | Providing and erecting direction and place identifications retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 807.3, fixed over aluminium sheeting 2 mm thick supported on mild steel angle iron post 75x75x6 mm firmly fixed to ground by means of properly designed foundation with M15 grade cement concrete 45x45x60 cm, 60 cm below ground level as per approved drawing. Identification sign board of size upto 0.90 sqm |
| 5 | Providing and erecting direction and place identifications retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 807.3, fixed over aluminium sheeting 2 mm thick supported on mild steel angle iron post 75x75x6 mm firmly fixed to ground by means of properly designed foundation with M15 grade cement concrete 45x45x60 cm, 60 cm below ground level as per approved drawing. Identification sign board of size above 0.90 sqm |
| 6 | Providing and fixing \\"L\\" type bollard 135cm height made out of 1.25mm thick M.S. sheet welded in conical section having upper dia 15cm and lower dia 20cm with another attachment of 150x150x7mm thick plate and hold fast at bottom, whole body is painted in white stove enamel and red reflective 3 band, each of 7.5cm and one reflective sheet of 15cm dia provided to it complete in all respect including all material, labour, diversion. |
| 7 | Solar Raised Pavement Markers: As per ASTM D 4280 & ASTM D 788 Supply & Installation of Solar Raised Pavement Markers made of Aluminium Alloy Body with Square shape, solar powered, LED self illumination in active mode. The solar stud marker shall support a load of 25000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IS: 12063:1987 standard and should withstand temperatures in range of 10°C to 75°C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency blinking is 2Hz. There should be super bright LEDs (one each side with over 5000 Millicandle luminous intensity) and its visibility should not less than 1000meter distance in night. The Height, width and length of the marker shall be less than 20mm, 125mm, 125mm and it should have one cylinder type shank 30mm +/-2mm and length of shank should be 60mm +/-5mm. Fixing will be by drilling holes on the road for the shanks to go Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender