Tender For Acoustic Wall Panelling And Acoustic False Ceiling Works At New Cvps Area, Main Office Building, Rbi, Ahmedabad
Tender Value
30 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
3 days left
EMD
60000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Acoustic Wall Panelling And Acoustic False Ceiling Works At New Cvps Area, Main Office Building, Rbi, Ahmedabad
BOQ
| Sl. No. | Item Description |
| 1 | Wall and Column Panelling - Providing and Fixing Channeled perforated panels of approx. dimensions of length 2400 mm, width 192mm and thickness of 15mm or any other dimensions approved by Banks Engineer, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White or any other shade approved by Banks Engineer) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or any approved dimensions of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece hot pressed to achieve NRC of more than 0.5 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips as per Manufacturer specifications etc. complete all as directed by the Banks Engineer. The panel shall be mounted by tongue and groove mechanism using inside clip on aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W). The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. The rate shall suitably include the following:a) Making suitable cut-outs and providing sufficient quantities of G.I adjustable hangers/danglers for light fittings, grills, diffusers, etc. as per requirement of the site condition. b) Preparing required designs, patterns, drops, sunk etc.Note:- Only visible plan area will be measured in the item and considered for payment.c) Making openings for the provision of necessary electrical works. d) Erecting sturdy and stable scaffolding including adhering to all safety precautions all complete and as directed by Bank’s Engineer.e) Thorough cleaning & removal of dust, cobwebs, stains & debris etc. from the area before commencement of the work, before fixing panel and after completion of work. Please Enable Macros to View BoQ information |
| 2 | Wall and Column Panelling - Providing and Fixing Channeled perforated panels of approx. dimensions of length 2400 mm, width 192mm and thickness of 15mm or any other dimensions approved by Banks Engineer, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White or any other shade approved by Banks Engineer) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or any approved dimensions of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece hot pressed to achieve NRC of more than 0.5 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips as per Manufacturer specifications etc. complete all as directed by the Banks Engineer. The panel shall be mounted by tongue and groove mechanism using inside clip on aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W). The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. The rate shall suitably include the following:a) Making suitable cut-outs and providing sufficient quantities of G.I adjustable hangers/danglers for light fittings, grills, diffusers, etc. as per requirement of the site condition. b) Preparing required designs, patterns, drops, sunk etc.Note:- Only visible plan area will be measured in the item and considered for payment.c) Making openings for the provision of necessary electrical works. d) Erecting sturdy and stable scaffolding including adhering to all safety precautions all complete and as directed by Bank’s Engineer.e) Thorough cleaning & removal of dust, cobwebs, stains & debris etc. from the area before commencement of the work, before fixing panel and after completion of work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender